Luminescent properties of single-phase Ba<Subscript>2</Subscript>P<Subscript>2</Subscript>O<Subscript>7</Subscript>:Tb<Superscript>3+</Superscript>, R (R = Eu<Superscript>2+</Superscript>, Ce<Superscript>3+</Superscript>) phosphors for white LED

The Ba₂P₂O₇:Tb³⁺, R (R?=?Eu²⁺, Ce³⁺) phosphors were synthesized by use of a co-precipitation method. Crystal phase, excitation and emission spectra of sample phosphors are analyzed by means of XRD and FL, respectively. The emission spectra of Ba₂P₂O₇:Ce³⁺, Tb³⁺ phosphors exhibit four linear peaks attributed to the ⁵D₄?→?⁷F_J (J?=?6–3) transition of Tb³⁺ while four broad emission bands are observed in the emission spectra of Ba₂P₂O₇:Eu²⁺, Tb³⁺ phosphors. The effects of Eu²⁺ concentration on the luminescent properties of Ba₂P₂O₇:Tb³⁺, R (R?=?Eu²⁺, Ce³⁺) are studied. Ce³⁺ affects the luminescent properties of Ba₂P₂O₇:Ce³⁺, Tb³⁺ phosphors just as the sensitizer. However, Eu²⁺ is considered both as the sensitizer and the activator in Ba₂P₂O₇:Eu²⁺, Tb³⁺ phosphors. The chromaticity coordinates of Eu²⁺ and Tb³⁺ co-doped phosphors gather around the white light field with the CCT approximate to 5000 K, indicating that the luminescent property of Ba₂P₂O₇:Eu²⁺, Tb³⁺ phosphors may approach to a desired level needed for white LED application.     

Controllable white light emission from Dy<Superscript>3+</Superscript>–Eu<Superscript>3+</Superscript> co-doped KCaBO<Subscript>3</Subscript> phosphor

Potassium calcium borate, KCaBO₃:Eu³⁺ phosphors with various Dy³⁺ concentrations (0–3 wt%) were synthesized by solid state reaction and studied for the first time. Under various UV–violet excitations, the obtained single monoclinic phased Dy³⁺–Eu³⁺ co-doped KCaBO₃ polycrystalline phosphors emit a combination of yellow–blue and red–orange wavelength giving intense white light, which can easily be controlled by varying the concentration of Dy³⁺. The increase in white light emission with the increase of Dy³⁺ concentration indicates the efficient energy inter-ion transfer from Dy³⁺ to Eu³⁺ ions. Furthermore, the observed emission lifetimes and the intense white light emission are suggestive exploration for the present phosphor for potential optoelectronic applications such as white light-emitting phosphor for blue LEDs chips.     

Ho<Superscript>3+</Superscript>-Doped ZrF<Subscript>4</Subscript>–BaF<Subscript>2</Subscript>–BiF<Subscript>3</Subscript> Ceramic 2-µm laser beam visualizer

A ceramic 2-µm laser beam visualizer based on Ho³⁺-doped β-BaZrF₆ is proposed. The ceramic has been prepared by crystallizing 60ZrF₄–35BaF₂–5BiF₃ glass doped with 3 wt % HoF₃. Exciting the Ho³⁺⁵I₇ level by a Tm:LiYF₄ (Tm:YLF) laser at λ = 1910 nm, we observed a strong red luminescence, due to the ⁵F₅ → ⁵I₈ transition, and a weaker, green luminescence, corresponding to the (⁵F₄, ⁵S₂) → ⁵I₈ transition. The threshold power density of the Tm:YLF laser at which a red spot was observed on a ceramic sample was 1.1 W/cm².     

Cathodoluminescence properties of SiO<Subscript>2</Subscript>:Pr<Superscript>3+</Superscript>and ZnO·SiO<Subscript>2</Subscript>:Pr<Superscript>3+</Superscript> phosphor nanopowders

The successful incorporation of ZnO nanoparticles in Pr³⁺-doped SiO₂ using a sol–gel process is reported. SiO₂:Pr³⁺ gels, with or without ZnO nanoparticles, were dried at room temperature and annealed at 600 °C. On the basis of the X-ray Diffraction (XRD) results, the SiO₂ was amorphous regardless of the incorporation of Pr³⁺ and nanocrystalline ZnO or annealing at 600 °C. The particles were mostly spherical and agglomerated as confirmed by Field Emission Scanning Electron Microscopy. Thermogravimetric analysis of dried gels performed in an N₂ atmosphere indicated that stable phases were formed at ≥900 °C. Absorption bands ascribed to ³H₄-³P_{(J = 0,1,2)}, ¹I₆ and ¹D₂ in the UV–VIS region were observed from SiO₂:Pr³⁺ colloids. The red cathodoluminescent (CL) emission corresponding to the ³P₀ → ³H₆ transition of Pr³⁺ was observed at 614 nm from dried and annealed SiO₂:Pr³⁺ powder samples. This emission was increased considerably when ZnO nanoparticles were incorporated. The CL intensity was measured at an accelerating voltage of 1-5 keV and a fixed beam current of 8.5 μA. The effects of accelerating voltage on the CL intensity and the CL degradation of SiO₂:Pr³⁺ and ZnO·SiO₂:Pr³⁺ were also investigated using Auger electron spectroscopy coupled with an Ocean Optics S2000 spectrometer.     

Y<Subscript>2</Subscript>O<Subscript>2</Subscript>S:Er<Superscript>3+</Superscript>,Ce<Superscript>3+</Superscript>—A new “invisible” IR phosphor

Ce³⁺ doping of Y₂O₂S:Er³⁺ can be used to suppress the visible anti-Stokes luminescence of the phosphor under excitation in the range 0.90–0.98 μm. We take advantage of this effect to create a new, efficient “invisible” IR phosphor emitting in the range 1.5–1.6 μm.     

Synthesis of Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce<Superscript>3+</Superscript> phosphor in the Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al metal–CeO<Subscript>2</Subscript> ternary system

Garnet phosphor Y₃Al₅O₁₂:Ce³⁺ is prepared in the Y₂O₃–Al metal–CeO₂ ternary system by the solid-state reaction method in the air. For the first time, metal Al is used as a source of aluminum for the reaction instead of traditional oxide Al₂O₃. It is shown that the chemical reaction can be realized at lower temperatures and without use of special reducing atmosphere. The structural and spectroscopic properties of the prepared powder phosphor are very close to those earlier reported for the Y₃Al₅O₁₂:Ce³⁺ single crystal.     

Characterization of <Superscript>4</Superscript>I<Subscript>9/2</Subscript> ↔ <Superscript>4</Superscript>F<Subscript>3/2</Subscript> optical transitions in trivalent Nd<Superscript>3+</Superscript> ions in GaLaS glass

The positions of Stark levels have been determined, using a step-by-step procedure, in the ⁴I_9/2 and ⁴F_3/2 manifolds of Nd³⁺ ions from absorption and photoluminescence measurements in the 12–293 K temperature range. This data has been used to calculate the emission cross-section for which the maximum value turns out to be ～2.3 × 10^?20 cm². The radiative recombination time, calculated using Judd–Ofelt analysis, of the ⁴F_3/2 manifold is in close vicinity to the experimentally determined times that were measured by the conventional decay of PL after interruption of excitation and by QFRS. Moreover, the peak time defined by QFRS is independent of temperature. Therefore, the dominant relaxation mechanism from the ⁴F_3/2 excited manifold of Nd³⁺ ions in GaLaS glass is believed to be by radiative emission.     

Synthesis,electronic state,and particle size stabilization of nanoparticulate [Co(OH)<Subscript>2</Subscript>(H<Subscript>3</Subscript>O)<Stack><Subscript>δ</Subscript><Superscript>+</Superscript></Stack>]<Superscript>δ+</Superscript>

We have synthesized nanoparticulate cobalt(II) hydroxide containing Co²⁺ in tetrahedral oxygen coordination (Co _Td ²⁺ ), atypical of such systems: nano- [Co(OH)₂(H₃O) _δ ⁺ ]^δ+. The (Co _Td ²⁺ ) coordination in the hydroxide is inferred from its electronic diffuse reflectance spectrum, which shows a multiplet of strong absorption bands at 14500, 15000, and 16000 cm^?1 (⁴ A ₂(F)-⁴ T ₁(P) transition). Nanoparticulate cobalt(II) hydroxide forms in a weakly acidic medium under essentially nonequilibrium conditions due to supersaturation (by three to four orders of magnitude) with the starting reagents (CoCl₂ and LiOH) at the instant of the formation of the poorly soluble phase Co(OH)₂. Presumably, colloidal particles of nanoparticulate cobalt(II) hydroxide in a weakly acidic aqueous medium have a positive surface charge, compensated by a counter-ion (Cl^?) layer: nano-[Co(OH)₂(H₃O) _δ ⁺ ]^δ+ · δCl^?. The XRD patterns of pastes (gels) containing this hydroxide show three broad-ened lines with d = 5.31 (2θ = 16.7°), 2.77 (2θ = 32.3°), and 2.32 Å (2θ = 38.8°). According to small-angle X-ray scattering data, nano-[Co(OH)₂(H₃O) _δ ⁺ ]^δ+ has a narrow particle size distribution (1.0–2.0 nm). Synthesis and storage conditions are identified which ensure stabilization of the electronic state and particle size of nano-[Co(OH)₂(H₃O) _δ ⁺ ]^δ+ for a long time.     

Structural and electrical properties of Ho<Superscript>3+</Superscript>-modified Pb(Zn<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>–9PbTiO<Subscript>3</Subscript> single crystals

Ho³⁺-modified Pb(Zn_1/3Nb_2/3)O₃–9PbTiO₃ (PZN–9PT) single crystals were grown through a flux method. Phase structure and microstructural morphology of the as-grown single crystals were performed by X-ray diffraction analysis and scanning electron microscopy. The refinement of the lattice parameters were obtained by the Rietveld method. The electrical properties of PZN–9PT single crystals were improved significantly by the modification of Ho³⁺ ions. The rhombohedral–tetragonal phase transition temperature, Curie temperature, coercive field at 15 kV cm^?1, and remnant polarization of Ho³⁺-modified PZN–9PT single crystals were increased by 14, 42 K, 2.4 kV cm^?1, and 7.5 μC cm^?2, respectively (i.e., 375.45, 448.45 K, 5.9 kV cm^?1, and 38.40 μC cm^?2, respectively). Furthermore, Lorentz-type law was used to describe the dielectric relaxor behavior of the as-grown single crystals.     

Photoluminescence of Eu<Superscript>3+</Superscript> ion in SnO<Subscript>2</Subscript> obtained by sol–gel

Photoluminescence data of Eu-doped SnO₂ xerogels are presented, yielding information on the symmetry of Eu³⁺ luminescent centers, which can be related to their location in the matrix: at lattice sites, substituting to Sn⁴⁺, or segregated at particles surface. Influence of doping concentration and/or particle size on the photoluminescence spectra obtained by energy transfer from the matrix to Eu³⁺ sites is investigated. Results show that a better efficiency in the energy transfer processes is obtained for high symmetry Eu³⁺ sites and low doping levels. Emission intensity from ⁵D₀→⁷F₁ transition increases as the temperature is raised from 10 to 240 K, under excitation at 266 nm laser line, because in this transition the multiphonon emission becomes significant only above 240 K. As an extension of this result, we predict high effectiveness for room temperature operation of Eu-based optical communication devices. X-ray diffraction data show that the impurity excess inhibits particle growth, which may influence the asymmetry ratio of luminescence spectra.     

Lewis and Brønsted acids in super-acid catalyst SO<Subscript>4</Subscript><Superscript>2−</Superscript>/ZrO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>

Super-acid catalyst, SO₄ ^2?/ZrO₂–SiO₂, with high zirconium loading was synthesized and the nature of the surface acid was investigated by FT-IR of pyridine adsorption. With the increasing ZrO₂ content, the Lewis and Brønsted acid sites increased and reached the maximum when Zr/Si (molar ratio) = 1.3. The sample with Zr/Si = 1.3 showed the strongest IR adsorption band in the S=O stretching region (1,300–1,400 cm^?1). Pyrosulfate and monosulfate species existed on the surface of the catalysts and the acidic strength could be enhanced by induction effect of their S=O groups. And there were two kinds of Brønsted acid sites on the surface of the catalysts.     

Crystallization and microstructural evolution of MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript>–La<Subscript>2</Subscript>O<Subscript>3</Subscript> glass-ceramics

Crystallization and microstructure of glasses with the molar compositions 1MgO·1.2Al₂O₃·2.8SiO₂·1.2TiO₂·xLa₂O₃ (x = 0.1 and 0.4) were thermally treated at different temperatures in the range from 950 to 1250 °C and then analyzed by X-ray diffraction and scanning electron microscopy, in combination with energy-dispersive X-ray spectroscopy and electron backscatter diffraction. It was found that the microstructure is first homogeneous with the precipitation of randomly distributed crystals and then indialite domains with embedded perrierite and rutile crystals are formed. For higher temperatures or prolonged times, more domains appear and expand into the bulk of the sample. Finally, the entire sample consists of the indialite domains and the boundaries that are enriched in rutile, perrierite, and magnesium aluminotitanate. Nevertheless, very distinct differences are observed between the samples with different La₂O₃ concentrations. For the sample with x = 0.4, the domains were detected at lower temperatures, while the quantity and size of the domains increase faster due to the promoted precipitation of indialite. For the sample with x = 0.1, in addition to the domain boundaries, secondary boundaries between the “regions” (assemblages of the domains) are observed in a larger length scale. The average size of the crystalline phases found between the “regions” is larger than that typically observed at the domain boundaries. The sizes of the crystals at the boundaries decrease with higher concentrations of La₂O₃, and the crystals (especially perrierite) within the domains become larger, resulting in a more homogeneous microstructure. This results in better dielectric properties, i.e., much higher quality factor for the sample with x = 0.4 in comparison to that with x = 0.1 after heat-treatment at 1150 or 1250 °C.     

Formation-decomposition equilibrium of the NpO<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack>·UO<Stack><Subscript>2</Subscript><Superscript>2+</Superscript></Stack> complex in chloride melts

The absorption spectra of the NpO ₂ ⁺ (5f ²) ion were examined in the region of the 3H ₅ ← ³ H ₄ magnetic dipole transition (1530–1760 nm) for series of melts with the UO ₂ ²⁺ concentration varied in the opposite directions: (1) NaCl-2CsCl eutectic melt with growing additions of the Cs₂UO₂Cl₄ complex salt and (2) Cs₂UO₂Cl₄ melt with growing additions of the NaCl-2CsCl mixture. Measurements of the integrated intensities of the bands belonging to the NpO ₂ ⁺ ·UO ₂ ²⁺ complex and unbound NpO ₂ ⁺ throughout the UO ₂ ²⁺ concentration range examined (up to 4.4 M in neat Cs₂UO₂Cl₄ melt) and processing of the data obtained in terms of the mass action law showed that the formation-decomposition reaction of the cation-cation complex can be described adequately only using the equation of reaction in the form NpO₂Cl ₄ ^3? + UO₂Cl ₄ ^2? ? {Cl₄ONpO?UO₂Cl₃}^4? = Cl^? (with the equilibrium constant of 1.3±0.1). Thus, the formation of the cationcation complex should be treated as replacement of chloride ion in the equatorial plane of uranyl(VI) by neptunyl(V), rather than as simple addition of UO ₂ ²⁺ to NpO ₂ ⁺ . The reverse reaction, decomposition of the cation-cation complex, consists essentially in replacement of neptunyl(V) by chloride ion.     

In vitro dissolution behavior of SiO<Subscript>2</Subscript>–MgO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–K<Subscript>2</Subscript>O–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–F glass–ceramic system

Herein, we report the results of the in vitro dissolution tests, which were carried out by immersing the selected glass-ceramic samples in artificial saliva (AS) for various time periods of up to 42 days. In our experiments, the SiO(2)-MgO-Al(2)O(3)-K(2)O-B(2)O(3)-F glass ceramics with different crystal morphology and crystal content were used and a comparison is also made with the baseline glass samples (without any crystals). The bioactivity of the samples was probed by measuring the changes in pH, ionic conductivity and ionic concentration of AS following in vitro dissolution experiments. High resistance of the selected glass-ceramic samples against in vitro leaching has been demonstrated by minimal weight loss (<1%) and insignificant density change, even after 6 weeks of dissolution in artificial saliva. While XRD analysis reveals the change in surface texture of the crystalline phase, FT-IR analysis weakly indicated the Ca-P compound formation on the leached surface. The experimental measurements further indicate that the leaching of F(-), Mg(2+) ions from the sample surface commonly causes the change in the surface chemistry. Furthermore, the presence of (Ca, P, O)-rich mineralized deposits on the leached glass-ceramic surface as well as the decrease in Ca(2+) ion concentrations in the leaching solutions (compared to that in the initial AS solution) provide evidences of the moderate bioactive or mild biomineralisation behaviour of investigated glass-ceramics.     

Luminous properties of skin–core structure new luminous fiber: SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>,Dy<Superscript>3+</Superscript>-PET/light conversion agent-PET

SrAl₂O₄:Eu²⁺,Dy³⁺-polyethylene terephthalate (PET)/light conversion agent-PET, which is a new skin–core structure luminous fiber that can emit red light in the darkness, was fabricated by melt spinning with the combination of light conversion agent-PET and SrAl₂O₄:Eu²⁺,Dy³⁺-PET. An energy transfer occurred between SrAl₂O₄:Eu²⁺,Dy³⁺ and light conversion agent, and the light conversion agent emitted red light absorbed from SrAl₂O₄:Eu²⁺,Dy³⁺. To investigate the effect of light conversion agent on the luminous properties of SrAl₂O₄:Eu²⁺,Dy³⁺-PET-light conversion agent, several kinds of luminous fiber that contained different light conversion agents were artificially manufactured and their luminous properties were investigated. Results showed that under near-ultraviolet excitation, the fluorescent color of luminous fiber was primarily located in the orange-red area, with more intense red color than the others.     

Photoluminescence,Judd–Ofelt analysis and photometric characterization of Eu<Superscript>3+</Superscript> activated Ca<Subscript>0.5</Subscript>Gd(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> red phosphor

The red emitting Ca_0.5Gd(WO₄)₂:Eu³⁺ was synthesized by a solid-state reaction method. X-ray diffraction patterns were used to characterize crystal structure as well as phase purity. The results suggest that the as synthesized powder phosphor possess scheelite crystal structure with tetragonal symmetry along with the space group of I4₁/a. SEM studies reveal that the as synthesized sample show polyhedral morphology with particle size of 5.5 µm. Photoluminescence excitation spectrum depicts that a broad band (from 200 to 300 nm) centered at 242 nm is attributed to the ligand to metal charge transfer transition of WO₄ ^2? and three intense with sharp absorption bands (observed at 394, 464 and 535 nm) are designated as f–f electronic transitions of Eu³⁺. Photoluminescence emission studies indicate that, under 394 nm UV excitation, a hypersensitive red emission was observed at 617 nm due to the transition from upper ⁵D₀ level to the ⁷F₂ lower level of Eu³⁺ ion. The spectroscopic behaviour of the as synthesized phosphor Ca_0.5Gd(WO₄)₂:Eu³⁺ was determined using Judd–Ofelt theory. The CIE color coordinates, colour correlated temperature and luminous efficacies of radiation were estimated. The as obtained results indicating that the Ca_0.5Gd(WO₄)₂:Eu³⁺ red phosphor is most suitable for solid state lighting applications.     

Intense 2.0 µm emission from Ho<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> co-doped Na<Subscript>5</Subscript>Lu<Subscript>9</Subscript>F<Subscript>32</Subscript> single crystal excited by 980 nm

This paper reported on optical spectra of Na₅Lu₉F₃₂ single crystals co-doped with ~?0.91 mol% Ho³⁺ and various Yb³⁺ concentrations by using an improved Bridgman method. The emission spectra and fluorescence decay curves were measured to investigate the luminescent properties of the Ho³⁺/Yb³⁺ co-doped Na₅Lu₉F₃₂ and the energy transfer process from Yb³⁺ to Ho³⁺ ion. Compared with the Ho³⁺ singly doped Na₅Lu₉F₃₂ crystal, the Ho³⁺/Yb³⁺ co-doped crystal had an obviously enhanced emission at 2.0 µm via the 980 nm laser diode excitation because of the efficient energy transfer from Yb³⁺ to Ho³⁺ ion. The maximum emission intensity at 2.0 µm was obtained at about 6.99 mol% Yb³⁺ concentration when the concentration of Ho³⁺ ions is fixed at ~?0.91 mol% in the current research. The maximum emission cross section of the above sample at 2.0 µm was calculated to be 1.23?×?10^?20 cm² according to the measured emission spectrum. The energy transfer efficiency from Yb³⁺:²F_5/2 to Ho³⁺:⁵I₆ for the crystal was estimated up to 90.8% indicating that Yb³⁺ ions can efficiently sensitize the Ho³⁺ ions.     

Spectroscopic properties of Nd<Superscript>3+</Superscript>, Yb<Superscript>3+</Superscript>-doped and Nd<Superscript>3+</Superscript>–Yb<Superscript>3+</Superscript>-codoped high silica glass

The Nd³⁺, Yb³⁺-doped and Nd³⁺–Yb³⁺-codoped high silica glasses (HSGs) were fabricated by sintering porous glasses impregnated with Nd³⁺ and Yb³⁺ ions solutions. The Judd–Ofelt theory was used to study the spectroscopic properties of Nd³⁺-doped HSGs. Large parameter Ω₂ of Nd³⁺-doped HSGs suggests a lower centrosymmetric coordination environment around the Nd³⁺ in HSG. The spontaneous emission probability and emission cross-section (σ_em) of Yb³⁺-doped HSGs are obtained. A broad emission band from 950 to 1,100 nm was detected when the Nd³⁺–Yb³⁺-codoped HSG was excited by 808 nm LD. The energy transfer process from Nd³⁺ to Yb³⁺ in HSG was described in this paper.     

Evaluation of CaO–SiO<Subscript>2</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–Na<Subscript>2</Subscript>O–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> bioglass-ceramics for hyperthermia application

Magnetic bioglass ceramics (MBC) are being considered for use as thermoseeds in hyperthermia treatment of cancer. While the bioactivity in MBCs is attributed to the formation of the bone minerals such as crystalline apatite, wollastonite, etc. in a physiological environment, the magnetic property arises from the magnetite [Fe₃O₄] present in these implant materials. A new set of bioglasses with compositions 41CaO · (52 ? x)SiO₂ · 4P₂O₅  · xFe₂O₃ · 3Na₂O (2 ≤ x ≤ 10 mol% Fe₂O₃) have been prepared by melt quenching method. The as-quenched glasses were then heat treated at 1050°C for 3 h to obtain the glass-ceramics. The structure and microstructure of the samples were characterized using X-ray diffraction and microscopy techniques. X-ray diffraction data revealed the presence of magnetite in the heat treated samples with x ≥ 2 mol% Fe₂O₃. Room temperature magnetic property of the heat treated samples was investigated using a Vibrating Sample Magnetometer. Field scans up to 20 kOe revealed that the glass ceramic samples had a high saturation magnetization and low coercivity. Room temperature hysteresis cycles were also recorded at 500 Oe to ascertain the magnetic properties at clinically amenable field strengths. The area under the magnetic hysteresis loop is a measure of the heat generated by the MBC. The coercivity of the samples is another important factor for hyperthermia applications. The area under the loop increases with an increase in Fe₂O₃ molar concentration and the. coercivity decreases with an increase in Fe₂O₃ molar concentration The evolution of magnetic properties in these MBCs as a function of Fe₂O₃ molar concentration is discussed and correlated with the amount of magnetite present in them.