Surface properties and behaviour on abiotic surfaces of Staphylococcus carnosus, a genetically homogeneous species

This work aimed to characterize the surface properties of Staphylococcus carnosus and the influence of different media on their ability to adhere and grow on industrial supports. As their colonization could be dependant of the strain, the genetic diversity of the strains was studied. The diversity of 13 strains analysed by pulsed-field gel electrophoresis revealed that the S. carnosus strains formed a homogeneous genetic group. Their surface properties, characterized by studying their affinity to solvents, were hydrophilic with a strong negative surface charge. The S. carnosus strain CIT 833 hardly adhered to polytetrafluoroethylene (PTFE) and stainless steel chips. Tryptic soy broth (TSB) was the most favourable medium for growth on stainless steel support while TSB/NaCl was better for growth on PTFE. Scanning electron microscopy (sem) showed that this strain weakly colonized both supports and did not form cell aggregates. Indeed, the strain did not synthesize polysaccharides. These results showed that S. carnosus adhered on different abiotic surfaces which are used in food factories but was not able to accumulate on these surfaces. The inability of S. carnosus to form biofilm could explain why S. carnosus is rarely isolated in meat processing environment.     

Formation of biofilms by Listeria monocytogenes under various growth conditions

Eight strains of Listeria monocytogenes (7644, 19112, 15313, Scott A, LCDC, 10403S, SLCC, and 1370) produce biofilms when grown on polyvinyl chloride microtiter well plates. The growth medium (tryptic soy broth [TSB] or modified Welshimer's broth [MWB] at 32 degrees C) influenced the amount of biofilm formed; maximum biofilms were formed in MWB by six strains and in TSB by the remaining two strains. This result suggests that the growth medium is critical in development of L. monocytogenes biofilm. This organism also produced biofilms on stainless steel chips. Biofilm formation on these chips was observed following growth in TSB at 4, 20, and 37 degrees C. After 20 h of incubation at 20 or 37 degrees C, the cell density was approximately 10(6) CFU per chip, and after 4 days incubation at 4 degrees C, the cell density was 10(5) CFU per chip. L. monocytogenes strain Scott A biofilm formation on stainless steel chips was visualized using scanning electron microscopy, which revealed dense aggregates of cells held together by meshlike webbing.     

Biofilm Formation of Staphylococcus aureus on Various Surfaces and Their Resistance to Chlorine Sanitizer

This study investigated the effect of material types (polystyrene, polypropylene, glass, and stainless steel) and glucose addition on Staphylococcus aureus biofilm formation, and the relationship between biofilm formation measured by crystal violet (CV) staining and the number of biofilm cells determined by cell counts was studied. We also evaluated the efficacy of chlorine sanitizer on inhibiting various different types of S. aureus biofilms on the surface of stainless steel. Levels of biofilm formation of S. aureus were higher on hydrophilic surfaces (glass and stainless steel) than on hydrophobic surfaces (polypropylene and polystyrene). With the exception of biofilm formed on glass, the addition of glucose in broth significantly increased the biofilm formation of S. aureus on all surfaces and for all tested strains (P ≤ 0.05). The number of biofilm cells was not correlated with the biomass of the biofilms determined using the CV staining method. The efficacy of chlorine sanitizer against biofilm of S. aureus was not significantly different depending on types of biofilm (P > 0.05). Therefore, further studies are needed in order to determine an accurate method quantifying levels of bacterial biofilm and to evaluate the resistance of bacterial biofilm on the material surface.     

Effects of the growth procedure on the surface hydrophobicity of Listeria monocytogenes cells and their adhesion to stainless steel.

The aim of this study was to examine the physicochemical surface properties and the ability to adhere to stainless steel of three strains of Listeria monocytogenes after different cultivation procedures. To this end, bacteria were cultivated at 37 degrees C after storage at two frequently used temperatures (4 degrees C or -80 degrees C) and were then transferred into the liquid medium (trypticase soy broth supplemented with 6 g liter(-1) of yeast extract, pH 7.3) between one and four times. In addition, the influence of supplementing the growth medium with lactic acid was explored, this organic acid being representative of both the dairy and cured meat industries. The hydrophobic/hydrophilic and electron-acceptor/electron-donor characteristics of the strains were evaluated by the microbial adhesion to solvents method. Using this technique, we recorded an increase in the hydrophobic properties of one strain stored at 4 degrees C, with an increasing number of transfers in the media (P < 0.05). Another plant-isolated strain appeared more hydrophobic and stuck better to stainless steel when cells were stored at 4 degrees C rather than at -80 degrees C. Preculturing L. monocytogenes in a lactic acid-supplemented medium increased the affinity of microbial cells to solvents and the bacterial attachment to stainless steel (P < 0.05).     

Formation of biofilm at different nutrient levels by various genotypes of Listeria monocytogenes

Strains of Listeria monocytogenes differ in their ability to form biofilms. The objectives of this study were to determine whether genetically related strains have similar biofilm-forming capacities and what effect nutrient concentration has on the ability of different strains to produce biofilms. Biofilms of 30 strains of L. monocytogenes, obtained from a variety of sources were grown on stainless steel in tryptic soy broth (TSB) or in a 1:10 dilution of TSB (DTSB) for 24 h at 32 degrees C. The amount of biofilm formed was determined with image analysis after cells were stained with bisBenzimide H 33258 (Hoechst 33258). The strains were genetically subtyped by repetitive element sequence-based PCR (rep-PCR) with the primer set rep-PRODt and rep-PROG5. Data were analyzed with an analysis of variance and Duncan's multiple range test. Eleven strains produced the same amount of biofilm in both media. Fourteen strains produced more biofilm in TSB than in DTSB. Five strains produced more biofilm in DTSB than in TSB. Serotype 4b strains produced more biofilm in TSB than did serotype 1/2a strains, whereas serotype 1/2a strains produced more biofilm in DTSB than did serotype 4b strains. Growth in DTSB resulted in decreased biofilm accumulation for serotype 4b strains. There was no correlation between genetic subtype and the amount of biofilm accumulation. These results indicate that strains of serotype 1/2a and serotype 4b differ in the regulation of their biofilm phenotype. The poor biofilm accumulation of serotype 4b isolates when grown in DTSB could be a factor in the predominance of serogroup 1/2 strains in food processing plants, where nutrients may be limited.     

Attachment and biofilm formation by Escherichia coli O157:H7 on stainless steel as influenced by exopolysaccharide production, nutrient availability, and temperature

The influence of exopolysaccharide (EPS) production, nutrient availability, and temperature on attachment and biofilm formation by Escherichia coli O157:H7 strains ATCC 43895 (wild type) and 43895-EPS (extensive EPS-producing mutant) on stainless steel coupons (SSCs) was investigated. Cells grown on heated lettuce juice agar and modified tryptic soy agar were suspended in phosphate-buffered saline (PBS). SSCs were immersed in the cell suspension (10(9) CFU/ml) at 4 degrees C for 24 h. Biofilm formation by cells attached to SSCs as affected by immersing in 10% tryptic soy broth (TSB), lettuce juice broth (LJB), and minimal salts broth (MSB) at 12 and 22 degrees C was studied. A significantly lower number of strain 43895-EPS cells, compared to strain ATCC 43895 cells, attached to SSCs during a 24-h incubation (4 degrees C) period in PBS suspension. Neither strain formed a biofilm on SSCs subsequently immersed in 10% TSB or LJB, but both strains formed biofilms in MSB. Populations of attached cells and planktonic cells of strain ATCC 43895 gradually decreased during incubation for 6 days in LJB at 22 degrees C, but populations of strain 43895-EPS remained constant for 6 days at 22 degrees C, indicating that the EPS-producing mutant, compared to the wild-type strain, has a higher tolerance to the low-nutrient environment presented by LJB. It is concluded that EPS production by E. coli O157:H7 inhibits attachment to SSCs and that reduced nutrient availability enhances biofilm formation. Biofilms formed under conditions favorable for EPS production may protect E. coli O157:H7 against sanitizers used to decontaminate lettuce and produce processing environments. Studies are under way to test this hypothesis.     

Interactions in biofilms between Listeria monocytogenes and resident microorganisms from food industry premises

Twenty nine bacterial strains were grown as binary culture biofilms with Listeria monocytogenes to assess their influence on the settlement of the latter on stainless steel coupons. Most of the strains had been isolated from food processing plants after cleaning and disinfection and were tentatively identified by the APILAB Plus 3.3.3 database (bioMerieux). Sixteen of them decreased L. monocytogenes biofilm colony forming units (CFU) counts. Three strains, Bacillus sp. CCL 9 an unidentified Gram-positive strain CCL 59 and Pseudomonas fluorescens E9. 1, led to a 3-log difference in CFU counts between the pure L. monocytogenes biofilms and the mixed biofilms. Eleven strains had no effect and only four, Kocuria varians CCL 73, Staphylococcus capitis CCL 54, Stenotrophomonas maltophilia CCL 47 and Comamonas testosteroni CCL 24, had a positive effect, with a 0.5- to 1.0-log increase in the L. monocytogenes biofilm CFU counts. On its own, L. monocytogenes settled as single cells, but in binary biofilms, different spatial arrangements were observed: (i) with K. varians CCL 73, K. varians CCL 56 and S. capitis CCL 54, L. monocytogenes cells gathered around the microcolonies of the partner strain; (ii) with the two Gram-negative strains, C. testosteroni CCL 24 and CCL 25, L. monocytogenes cells formed its own microcolonies. No link could be found between the exopolysaccharide production capacity of the bacterial strains in pure-culture biofilms and their effect on the L. monocytogenes population in mixed biofilms. With one strain, C. testosteroni CCL 24, adding filter-sterilized supernatant from a pure-culture biofilm to a pure culture of L. monocytogenes increased the number of L. monocytogenes cells adhering to the stainless steel coupons and forming microcolonies. This study suggests that the "house flora" can have a strong effect on the likelihood of finding L. monocytogenes on inert surfaces.     

Effect of surface roughness and stainless steel finish on Listeria monocytogenes attachment and biofilm formation

The purpose of this study was to evaluate the effect of surface roughness (Ra) and finish of mechanically polished stainless steel (Ra = 0.26 +/- 0.05, 0.49 +/- 0.10, and 0.69 +/- 0.05 microm) and electropolished stainless steel (Ra = 0.16 +/- 0.06, 0.40 +/- 0.003, and 0.67 +/- 0.02 microm) on Listeria adhesion and biofilm formation. A four-strain cocktail of Listeria monocytogenes was used. Each strain (0.1%) was added to 200 ml of tryptic soy broth (TSB), and coupons were inserted to the mixture for 5 min. For biofilm formation, coupons with adhesive cells were incubated in 1:20 diluted TSB at 32 degrees C for 48 h. The experiment was performed by a randomized block design. Our results show that the level of Listeria present after 48 h of incubation (mean = 7 log CFU/cm2) was significantly higher than after 5 min (mean = 6.0 log CFU/cm2) (P < 0.01). No differences in initial adhesion were seen in mechanically finished (mean = 6.7 log CFU/cm2) when compared with electropolished stainless steel (mean = 6.7 log CFU/cm2) (P > 0.05). Listeria initial adhesion (values ranged from 5.9 to 6.1 log CFU/cm2) or biofilm formation (values ranged from 6.9 to 7.2 log CFU/cm2) was not significantly correlated with Ra values (P > 0.05). Image analysis with an atomic force microscope showed that bacteria did not colonize the complete surface after 48 h but were individual cells or grouped in microcolonies that ranged from 5 to 10 microm in diameter and one to three cell layers in thickness. Exopolymeric substances were observed to be associated with the colonies. According to our results, electropolishing stainless steel does not pose a significant advantage for food sanitation over mechanically finished stainless steel.     

Different patterns of biofilm formation in Staphylococcus aureus under food-related stress conditions

Staphylococcus aureus and its biofilm formation are recognized as a serious clinical problem. S. aureus is also a food borne pathogen, and little is known regarding biofilm formation of food-related strains. We have studied biofilm formation of both food-related and clinical S. aureus strains grown under different stress conditions (temperature, sodium chloride, glucose and ethanol) relevant for food processing. Strong biofilm formers were identified among food-related S. aureus strains, and biofilm formation was affected by environmental conditions relevant for the food industry. The results showed that temperatures suboptimal for growth increased the production of biofilm. The combined presence of sodium chloride and glucose enhanced the biofilm formation. Both temperature and osmolarity affected the expression of several biofilm associated genes (e.g. icaA and rbf). Variations in gene expression (e.g. icaA, agrA and sigB) between strains were also observed. Our results support the existence of both ica-dependent and ica-independent mechanisms of biofilm production in S. aureus. The phenotypic and genotypic results showed highly diverse and complex patterns of biofilm formation in S. aureus. This clearly demonstrates that caution must be exercised before drawing general conclusions about gene expression in S. aureus in relation to regulation of biofilm formation. The results are relevant for food safety as they indicate that food processing conditions could promote biofilm formation by S. aureus.     

Autoinducer-2 activity of gram-negative foodborne pathogenic bacteria and its influence on biofilm formation

ABSTRACT:  This study evaluated whether autoinducer-2 (AI-2) activity would be associated with biofilm formation by Salmonella and Escherichia coli O157:H7 strains on food contact surfaces. In study I, a Salmonella Typhimurium DT104 strain and an E . coli O157:H7 strain, both AI-2 positive, were individually inoculated into 50 mL of Luria–Bertani (LB) or LB + 0.5% glucose (LBG) broth, without or with stainless steel or polypropylene ( Salmonella ) coupons. At 0, 14 ( Salmonella ), 24, 48, and 72 h of storage (25 °C), cells in suspension and detached cells from the coupons, obtained by vortexing, were enumerated on tryptic soy agar. In study II, a Salmonella Thompson AI-2-positive strain and an AI-2-negative strain, and an E . coli O157:H7 AI-2-positive strain and an AI-2-negative strain were inoculated into LB broth with stainless steel coupons. Cells were enumerated as in study I. In both studies, AI-2 activity was determined in cell-free supernatants. Cell numbers of S . Typhimurium DT104 on biofilms were higher ( P < 0.05) in LB than those in LBG, while the E . coli O157:H7 strain showed no difference ( P ≥ 0.05) in biofilm cell counts between LB and LBG after storage for 72 h. Both S . Typhimurium DT104 and E . coli O157:H7 strains produced higher ( P < 0.05) AI-2 activity in LBG than LB cell suspensions. Cell counts of AI-2-positive and-negative S . Thompson and E . coli O157:H7 strains were not different ( P ≥ 0.05) within suspensions or coupons (study II). The results indicated that, under the conditions of this study, AI-2 activity of the pathogen strains tested may not have a major influence on biofilm formation on food contact surfaces, which was similar between AI-2-positive and -negative strains.     

Biofilm formation by multidrug-resistant Salmonella enterica serotype typhimurium phage type DT104 and other pathogens

The biofilm-forming capability of Salmonella enterica serotypes Typhimurium and Heidelberg, Pseudomonas aeruginosa, Listeria monocytogenes, Escherichia coli O157:H7, Klebsiella pneumoniae, and Acinetobacter baumannii isolated from humans, animal farms, and retail meat products was evaluated by using a microplate assay. The tested bacterial species showed interstrain variation in their capabilities to form biofilms. Strong biofilm-forming strains of S. enterica serotypes, E. coli O157: H7, P. aeruginosa, K. pneumoniae, and A. baumannii were resistant to at least four of the tested antibiotics. To understand their potential in forming biofilms in food-processing environments, the strong biofilm formers grown in beef, turkey, and lettuce broths were further investigated on stainless steel and glass surfaces. Among the tested strains, Salmonella Typhimurium phage type DT104 (Salmonella Typhimurium DT104) isolated from retail beef formed the strongest biofilm on stainless steel and glass in beef and turkey broths. K. pneumoniae, L. monocytogenes, and P. aeruginosa were also able to form strong biofilms on the tested surface materials. Salmonella Typhimurium DT104 developed a biofilm on stainless steel in beef and turkey broths through (i) initial attachment to the surface, (ii) formation of microcolonies, and (iii) biofilm maturation. These findings indicated that Salmonella Typhimurium DT104 alongwith other bacterial pathogens could be a source of cross-contamination during handling and processing of food.     

Resistance of pathogenic bacteria on the surface of stainless steel depending on attachment form and efficacy of chemical sanitizers

Various bacteria including food spoilage bacteria and pathogens can form biofilms on different food processing surfaces, leading to potential food contamination or spoilage. Therefore, the survival of foodborne pathogens (Escherichia coli O157:H7, Listeria monocytogenes, Salmonella typhimurium, Staphylococcus aureus, Cronobacter sakazakii) in different forms (adhered cells, biofilm producing in TSB, biofilm producing at RH 100%) on the surface of stainless steel and stored at various relative humidities (RH 23%, 43%, 68%, 85%, and 100%) at room temperature for 5 days was investigated in this study. Additionally, the efficacy of chemical sanitizers (chlorine-based and alcohol-based commercial sanitizers) on inhibiting various types of biofilms of E. coli O157:H7 and S. aureus on the surface of stainless steel was investigated. The number of pathogens on the surface of stainless steel in TSB stored at 25 °C for 7 days or RH 100% at 25 °C for 7 days was significantly increased and resulted in the increase of 3 log₁₀ CFU/coupon after 1 day, and these levels were maintained for 7 days. When stainless steel coupons were stored at 25 °C for 5 days, the number of pathogens on the surface of stainless steel was significantly reduced after storage at RH 23%, 43%, 68%, and 85%, but not at 100%. When the bacteria formed biofilms on the surface of stainless steel in TSB after 6 days, the results were similar to those of the attached form. However, levels of S. aureus and C. sakazakii biofilms were more slowly reduced after storage at RH 23%, 43%, 68%, and 85% for 5 days than were those of the other pathogens. Formation of biofilms stored at RH 100% for 5 days displayed the highest levels of resistance to inactivation. Treatment with the alcohol sanitizer was very effective at inactivating attached pathogens or biofilms on the surface of stainless steel. Reduction levels of alcohol sanitizer treatment ranged from 1.91 to 4.77 log and from 4.35 to 5.35 log CFU/coupon in E. coli O157:H7 and S. aureus, respectively. From these results, the survival of pathogens contaminating the surfaces of food processing substrates such as stainless steel varied depending on RH and attachment form. Also, alcohol-based sanitizers can be used as a potential method to remove microbial contamination on the surfaces of utensils, cooking equipment, and other related substrates regardless of the microbial attached form.     

In situ characterization and analysis of Salmonella biofilm formation under meat processing environments using a combined microscopic and spectroscopic approach

Salmonella biofilm on food-contact surfaces present on food processing facilities may serve as a source of cross-contamination. In our work, biofilm formation by multi-strains of meat-borne Salmonella incubated at 20 °C, as well as the composition and distribution of extracellular polymeric substances (EPS), were investigated in situ by combining confocal laser scanning microscopy (CLSM), scanning electron microscope (SEM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and Raman spectroscopy. A standard laboratory culture medium (tryptic soy broth, TSB) was used and compared with an actual meat substrate (meat thawing-loss broth, MTLB). The results indicated that Salmonella grown in both media were able to form biofilms on stainless steel surfaces via building a three-dimensional structure with multilayers of cells. Although the number of biofilm cells grown in MTLB was less than that in TSB, the cell numbers in MTLB was adequate to form a steady and mature biofilm. Salmonella grown in MTLB showed “cloud-shaped” morphology in the mature biofilm, whereas when grown in TSB appeared “reticular-shaped”. The ATR-FTIR and Raman analysis revealed a completely different chemical composition between biofilms and the corresponding planktonic cells, and some important differences in biofilms grown in MTLB and in TSB. Importantly, our findings suggested that the progress towards a mature Salmonella biofilm on stainless steel surfaces may be associated with the production of the EPS matrix, mainly consisting of polysaccharides and proteins, which may serve as useful markers of biofilm formation. Our work indicated that a combination of these non-destructive techniques provided new insights into the formation of Salmonella biofilm matrix.     

Temperature and nutrient effects on Campylobacter jejuni attachment on multispecies biofilms on stainless steel

Campylobacterjejuni is a thermophilic microaerophilic pathogen that is commonly found in the intestinal tract of chickens. In this study, attachment of C. jejuni 1221gfp in biofilms on stainless steel was assessed at various temperatures and with reduced nutrients. Bacteria collected from a saline rinse of processed broiler chicken carcasses were used to form initial biofilms. The whole carcass rinse (WCR) biofilms were formed by incubation of the bacteria for 16 h at 13, 20, 37, and 42 degrees C on stainless steel coupons in tryptic soy broth (TSB). The resulting biofilms were stained with Hoechst 33258 stain and visualized by epifluorescence microscopy. WCR biofilms formed at 13 degrees C yielded the highest surface area coverage (47.6%), and the lowest coverage (2.1%) was attained at 42 degrees C. C. jejuni transformed to produce green fluorescent protein (gfp) was allowed to attach to the preexisting biofilms (from WCR incubated for 16 h) at each of the four temperatures, and attached cells were enumerated by visualization with an epifluorescence microscope. Attachment of C. jejuni 1221gfp did not significantly differ (P > 0.05) among the four temperatures. C. jejuni 1221gfp was cultured only from coupons with biofilms formed at 13 and 20 degrees C. For nutrient limitation experiments, WCR biofilms were allowed to grow in 10- and 50-fold diluted TSB at 20 and 37 degrees C for 48 h. The WCR biofilm surface area coverage (approximately 2%) was greater at 37 degrees C than at 20 degrees C for both TSB concentrations. C. jejuni 1221gfp was incubated with the WCR biofilm for 48 h at 20 and 37 degrees C, and attached cells were enumerated. Attachment was significantly higher (P < 0.05) only for the treatments with 1:10 TSB at 20 degrees C and 1:50 TSB at 37 degrees C. Under reduced-nutrient conditions, C. jejuni 1221gfp was cultured only from biofilms formed at 20 degrees C. Under the conditions tested, the attachment of C. jejuni 1221gfp on stainless steel and biofilms was affected by a combination of temperature and nutrient availability, but C. jejuni culturability was affected solely by temperature.     

Biofilm formation and sporulation by Bacillus cereus on a stainless steel surface and subsequent resistance of vegetative cells and spores to chlorine, chlorine dioxide, and a peroxyacetic acid-based sanitizer

Biofilm formation by Bacillus cereus 038-2 on stainless steel coupons, sporulation in the biofilm as affected by nutrient availability, temperature, and relative humidity, and the resistance of vegetative cells and spores in biofilm to sanitizers were investigated. Total counts in biofilm formed on coupons immersed in tryptic soy broth (TSB) at 12 and 22 degrees C consisted of 99.94% of vegetative cells and 0.06% of spores. Coupons on which biofilm had formed were immersed in TSB or exposed to air with 100, 97, 93, or 85% relative humidity. Biofilm on coupons immersed in TSB at 12 degrees C for an additional 6 days or 22 degrees C for an additional 4 days contained 0.30 and 0.02% of spores, respectively, whereas biofilm exposed to air with 100 or 97% relative humidity at 22 degrees C for 4 days contained 10 and 2.5% of spores, respectively. Sporulation did not occur in biofilm exposed to 93 or 85% relative humidity at 22 degrees C. Treatment of biofilm on coupons that had been immersed in TSB at 22 degrees C with chlorine (50 microg/ml), chlorine dioxide (50 microg/ml), and a peroxyacetic acid-based sanitizer (Tsunami 200, 40 microg/ml) for 5 min reduced total cell counts (vegetative cells plus spores) by 4.7, 3.0, and 3.8 log CFU per coupon, respectively; total cell counts in biofilm exposed to air with 100% relative humidity were reduced by 1.5, 2.4, and 1.1 log CFU per coupon, respectively, reflecting the presence of lower numbers of vegetative cells. Spores that survived treatment with chlorine dioxide had reduced resistance to heat. It is concluded that exposure of biofilm formed by B. cereus exposed to air at high relative humidity (> or =97%) promotes the production of spores. Spores and, to a lesser extent, vegetative cells embedded in biofilm are protected against inactivation by sanitizers. Results provide new insights to developing strategies to achieve more effective sanitation programs to minimize risks associated with B. cereus in biofilm formed on food contact surfaces and on foods.     

Biofilm formation of Salmonella Typhimurium on stainless steel and acrylic surfaces as affected by temperature and pH level

The effect of temperature (28, 37 and 42 °C) and pH (6 and 7) on the biofilm formation capability of Salmonella Typhimurium on stainless steel and acrylic was investigated. The rate of biofilm formation increased with increasing temperature and pH, while the number of attached cells after 240 h decreased with increasing temperature and was not different between pH 6 and 7. The surface hydrophobicity of bacterial cells was not significantly (p > 0.05) different among tested conditions. Electron-donating/accepting properties changed with pH and temperature, although these changes did not correlate with the ability to form biofilms under respective conditions. Attachment of S. Typhimurium showed a preference for stainless steel compared to acrylic surfaces under all conditions tested. The results suggest that salmonellae were less adherent to acrylic than to stainless steel surfaces; thus, acrylic-type surfaces should be considered for use in the food industry over stainless steel where applicable. The rate of biofilm formation increased at higher temperatures and pH levels within the tested ranges. Hurdle technology using lower temperatures reduced pH may help delay biofilm formation on food contact surfaces contaminated with S. Typhimurium.     

Inactivation of Escherichia coli O157:H7 on stainless steel upon exposure to Paenibacillus polymyxa biofilms

We investigated the potential use of biofilm formed by a competitive-exclusion (CE) microorganism to inactivate Escherichia coli O157:H7 on a stainless steel surface. Five microorganisms showing inhibitory activities against E. coli O157:H7 were isolated from vegetable seeds and sprouts. The microorganism with the greatest antimicrobial activity was identified as Paenibacillus polymyxa (strain T5). In tryptic soy broth (TSB), strain T5 reached a higher population at 25 °C than at 12 or 37 °C without losing inhibitory activity against E. coli O157:H7. When P. polymyxa (6 log CFU/mL) was co-cultured with E. coli O157:H7 (2, 3, 4, or 5 log CFU/mL) in TSB at 25 °C, the number of E. coli O157:H7 decreased significantly within 24 h. P. polymyxa formed a biofilm on stainless steel coupons (SSCs) in TSB at 25 °C within 24 h, and cells in biofilms, compared to attached cells without biofilm formation, showed significantly increased resistance to a dry environment (43% relative humidity [RH]). With the exception of an inoculum of 4 log CFU/coupon at 100% RH, upon exposure to biofilm formed by P. polymyxa on SSCs, populations of E. coli O157:H7 (2, 4, or 6 log CFU/coupon) were significantly reduced within 48 h. Most notably, when E. coli O157:H7 at 2 log CFU/coupon was applied to SSCs on which P. polymyxa biofilm had formed, it was inactivated within 1 h, regardless of RH. These results will be useful when developing strategies using biofilms produced by competitive exclusion microorganisms to inactivate foodborne pathogens in food processing environments.     

INACTIVATION OF LISTERIA MONOCYTOGENES BIOFILMS BY ELECTROLYZED OXIDIZING WATER

This study investigates the resistance of Listeria monocytogenes biofilms on stainless steel surfaces to electrolyzed oxidizing (EO) water. A direct agar overlay method was used to estimate the attached bacteria on stainless steel coupons after an EO water treatment. A scraping method was also used to quantify the adherent cell populations after the EO water treatment. The stainless steel surface allowed 10 to 15% of the surface area to be covered by Listeria biofilm when the inoculated stainless steel coupon was incubated in 10% tryptic soy broth (TSB) at 23C for 48 h. When the stainless steel coupons containing adherent cells were treated with EO water (56 mg/L of residual chlorine) for 10, 30, 60, 180, and 300 s, adherent cell populations (10.3 log¹⁰ CFU/coupon) were reduced with increasing treatment time. Although the direct agar overlay methods do not quantify survival of single bacteria, only one to five cell clumps per coupon survived after 300 s of the EO water treatment. Using the scraping method, the adherent cell population on the stainless steel coupons was reduced by about 9 log cycles after 300 s of EO water treatment.     

不同环境条件对隆德假单胞菌生物被膜形成能力的影响

为研究环境条件对食品腐败菌隆德假单胞菌（Pseudomonas lundensis,PL）生物被膜形成能力的影响,采用微孔板结晶紫法测定不同的营养条件、接种浓度、pH、NaCl和Mg2+浓度条件下其生物被膜量,用激光共聚焦扫描显微镜观测其在不锈钢材料上的黏附和结构特征。结果表明,PL生物被膜的形成量在营养胁迫下降低,稀释TSB培养基50倍造成的营养胁迫使其生物被膜量从1.75±0.35降低至0.24±0.17。PL接种量从1.3×107 CFU/mL降至2.5×104 CFU/mL时,其生物被膜的形成量无显著差异（P>0.05）,在pH为8.0时PL形成生物被膜量最多,1.25%以上的葡萄糖、4%以上的NaCl和0.5%的Mg2+能够显著（P<0.05）抑制PL生物被膜的形成。激光共聚焦显微镜观测结果表明该菌在一定浓度下具有在不锈钢表面形成典型生物被膜的能力。PL生物被膜形成能力受营养条件、葡萄糖浓度、pH、NaCl浓度、Mg2+等环境因子的影响。     

Biofilm formation and contamination of cheese by nonstarter lactic acid bacteria in the dairy environment

Defects in cheese, such as undesirable flavors, gas formation, or white surface haze from calcium lactate crystals, can result from growth of nonstarter lactic acid bacteria (NSLAB). The potential for biofilm formation by NSLAB during cheese manufacturing, the effect of cleaning and sanitizing on the biofilm, and bacterial growth and formation of defects during ripening of the contaminated cheese were studied. Stirred-curd Cheddar cheese was made in the presence of stainless steel chips containing biofilms of either of two strains of erythromycin-resistant NSLAB (Lactobacillus curvatus strain JBL2126 or Lactobacillus fermentum strain AWL4001). During ripening, the cheese was assayed for total lactic acid bacteria, numbers of NSLAB, and percentage of lactic acid isomers. Biofilms of L. curvatus formed during cheese making survived the cleaning process and persisted in a subsequent batch of cheese. The starter culture also survived the cleaning process. Additionally, L. curvatus biofilms present in the vat dislodged, grew to high numbers, and caused a calcium lactate white haze defect in cheese during ripening. On the other hand, biofilms of L. fermentum sloughed off during cheese making but could not compete with other NSLAB present in cheese during ripening. Pulsed-field gel electrophoresis results verified the presence of the two biofilm strains during cheese making and in the ripening cheese. Probable contamination sites in the plant for other NSLAB isolated in the cheese were identified, thus supporting the hypothesis that resident NSLAB biofilms are a viable source of contamination in the dairy environment.