阴极端面旋转弧根的数值分析

辅助电弧的阴极弧根在管状钨阴极端面旋转时，随着阴极弧根旋转频率的增加，在阴极端面形成一圈温度较高的区域；区域中各点的温度（除弧根处温度）趋于均匀，从而为主电弧的阴极弧根在这个区域中分裂成多弧根或形成扩散型弧根模式提供了必要的温度条件；弧根处的阴极端面温度随旋转频率的增加而下降并趋于一个稳定的值。本文利用三维热传导方程对此进行了分析。     

Parametric Study on Arc Behavior of Magnetically Diffused Arc

A model coupling the plasma with a cathode body is applied in the simulation of the diffuse state of a magnetically rotating arc.Four parametric studies are performed:on the external axial magnetic field (AMF),on the cathode shape,on the total current and on the inlet gas velocity.The numerical results show that:the cathode attachment focuses in the center of the cathode tip with zero AMF and gradually shifts off the axis with the increase of AMF;a larger cathode conical angle corresponds to a cathode arc attachment farther away off axis;the maximum values of plasma temperature increase with the total current;the plasma column in front of the cathode tip expands more severely in the axial direction,with a higher inlet speed;the cathode arc attachment shrinks towards the tip as the inlet speed increases.The various results are supposed to be explained by the joint effect of coupled cathode surface heating and plasma rotating flow.     

Analysis of Effects of the Arc Voltage on Arc Discharges in a Cathode Ion Source of Neutral Beam Injector

A hot cathode bucket ion source is used for the EAST(experimental advanced superconducting tokamak)neutral beam injector.The thermal electrons emitted from the surface of the cathode are extracted and accelerated by the electric field formed by the arc voltage,which is applied between the arc chamber of the ion source and the cathode.This paper analyzes the effects of arc voltage on the arc discharge in a hot cathode high current ion source.     

阴极有半圆柱形凹槽的非对称磁控管型H~-离子源的试验研究

一、前言国内唯一的一台标准磁控管型H~-离子源已在1983年完成了桌上试验研究,达到了预期的指标。试验中发现,该源按弧功率估算应能引出更多的H~-束流(>50mA),H~-束流的引出除受该装置引出电压(<18kV)的限制外,阴极表面利用系数低也限制了H~-束流的引出,为提高源的效率,引用了阴极-阳极引出狭缝形状聚焦技术,试制了一个带半圆     

Three-dimensional non-equilibrium modeling of a DC multi-cathode arc plasma torch

In this paper, a three-dimensional non-equilibrium steady arc model is used to investigate the temperature, velocity and electromagnetic field in multi-cathode arc torch, and the formation mechanism of a large-area, uniform and diffused arc plasma is analyzed. The numerical simulation results show that a large volume plasma region can be formed in the central region of the generator during discharge. During this process, the maximum electron temperature appears near the cathode and in the central convergence region, while the maximum heavy particle temperature only appears in the central convergence region. This phenomenon is consistent with the experimental arc images. Near the cathode tip, the arc column is in a contraction state. In the area slightly away from the cathode, the six arc columns begin to join together. In the plasma generator, there is a large-scale current distribution in all directions of X, Y and Z, forming a stable arc plasma with a wide range of diffusion. The calculated electron temperature distribution is in good agreement with the measured electron temperature. The results suggest that the largearea diffused arc plasma in the multi-cathode arc torch is the combined effect of current distribution, convection heat transfer and heat conduction.     

Numerical simulation of low-current vacuumarc jet considering anode evaporation in different axial magnetic fields

As the main source of the vacuum arc plasma, cathode spots (CSs) play an important role on the behaviors of the vacuum arc. Their characteristics are affected by many factors, especially by the magnetic field. In this paper, the characteristics of the plasma jet from a single CS in vacuum arc under external axial magnetic field (AMF) are studied. A multi-species magneto-hydro-dynamic (MHD) model is established to describe the vacuum arc. The anode temperature is calculated by the anode activity model based on the energy flux obtained from the MHD model. The simulation results indicate that the external AMF has a significant effect on the characteristic of the plasma jet. When the external AMF is high enough, a bright spot appears on the anode surface. This is because with a higher AMF, the contraction of the diffused arc becomes more obvious, leading to a higher energy flux to the anode and thus a higher anode temperature. Then more secondary plasma can be generated near the anode, and the brightness of the ‘anode spot’ increases. During this process, the arc appearance gradually changes from a cone to a dumbbell shape. In this condition, the arc is in the diffuse mode. The appearance of the plasma jet calculated in the model is consistent with the experimental results.     

大气压下大功率等离子体炬的数值模拟

主要研究直流等离子体炬的数值模拟方法,通过求解等离子体弧社区域的能量守恒,动量守恒,质量守恒及电流连续性方程,得到不同边界条件下温度,速度,电流密度分布,计算了大气压下２００Ａ自由氩弧的温度分布,电势和电流分布,并与实验数据及现有的理论计算进行了比较,得到了较好的结果,在此基础上结合本实验室５０００Ａ大功率等离子体炬,讨论了有阴极喷口存在下的弧柱部分的数值计算,以及能量守恒方程中辐射项,焦耳热项的     

Characteristics of Single Cathode Cascaded Bias Voltage Arc Plasma

A single cathode with a cascaded bias voltage arc plasma source has been developed with a new quartz cathode chamber,instead of the previous copper chambers,to provide better diagnostic observation and access to the plasma optical emission.The cathode chamber cooling scheme is also modified to be naturally cooled only by light emission without cooling water to improve the optical thin performance in the optical path.A single-parameter physical model has been developed to describe the power dissipated in the cascaded bias voltage arc discharge argon plasmas,which have been investigated by utilizing optical emission spectroscopy(OES) and Langmuir probe.In the experiments,discharge currents from 50 A to 100 A,argon flow rates from 800 sccm to 2000 sccm and magnetic fields of 0.1 T and 0.2 T were chosen.The results show:(a) the relationship between the averaged resistivity and the averaged current density exhibits an empirical scaling law as η∝ j~(-0.63369) and the power dissipated in the arc has a strong relation with the filling factor;(b) through the quartz,the argon ions optical emission lines have been easily observed and are dominating with wavelengths between 340 nm and 520 nm,which are the emissions of Ar~+-434.81 nm and Ar~+-442.60 nm line,and theintensities are increasing with the arc current and decreasing with the inlet argon flow rate;and(c) the electron density and temperature can reach 2.0 × 10~(19) m~(-3) and 0.48 eV,respectively,under the conditions of an arc current of 90 A and a magnetic field of 0.2 T.The half-width of the n_e radial profile is approximatively equal to a few Larmor radii of electrons and can be regarded as the diameter of the plasma jet in the experiments.     

Investigation of cathode spot characteristics in vacuum under transverse magnetic field (TMF) contacts

With the continuous improvement of current levels in power systems,the demands on the breaking capacity requirements of vacuum circuit breakers are getting higher and higher.The breaking capacity of vacuum breakers is determined by cathode spots,which provide electrons and metal vapor to maintain the arc.In this paper,experiments were carried out on two kinds of transverse magnetic field (TMF) contacts in a demountable vacuum chamber,the behavior of the cathode spots was recorded by a high-speed charge-coupled device (CCD) video camera,and the characteristics of the cathode spots were analyzed through the image processing method.The phenomenon of cathode spot groups and the star-shaped pattern of the spots were both discovered in the experiment.The experimental results show that with the condition of TMF contacts the initial expansion speed of cathode spots is influenced by some parameters,such as the tested current,contact gap,the structure of the contact,the contact diameter,the number of slots,etc.In addition,the influence of the magnetic field on the formation of the cathode spot groups,the distribution,and the dynamic characteristics of the cathode spots were analyzed.It is concluded that the characteristics of the cathode spots are due to the effect of the magnetic field on the near-cathode plasma.The study of the characteristics of cathode spots in this paper would be helpful in the exploration of the physical process of vacuum arcs,and would be of guiding significance in optimizing the design of vacuum circuit breakers.     

Hot Cathode’s Working Voltage Impacts on the Operation of High Current Ion Source

High power ion source is one of the important parts of the neutral beam injection. It produces high energy beam by extracting and accelerating ions from its arc chamber. The hot cathode (filaments) in the arc chamber of the ion source operates in two modes. Operation mode of the cathode has great effect on the stable operation of the ion source. Based on the theory of hot cathode and experimental results, this paper presents the operation results (beam current, arc efficiency) of an ion source with various cathode temperatures (controlled by voltage applied to the cathode).     

Simulation of Filament Heater for Uniform Emission from Dispenser Cathode

This paper presents the design study of toroid shape filament heater for dispenser cathode.The filament heater will be used in cathode assembly of 200 kW 42 GHz gyrotron. A 3 D model of cathode assembly is designed using electromagnetic and thermal simulation software, ANSYS. The simulations are performed for optimizing the input filament heater power with respect to cathode surface temperature. The parametric study shows that the input power and cathode surface temperature depends strongly on the potting material, diameter of filament, number of turns, position and height of the filament heater with respect to cathode pellet. The design analyses are also carried out for two different filament heater materials i.e. tungsten and molybdenum. Further, the thermal, structural and transient analyses are also carried out to study the mechanical strength of the filament heater. It is concluded that the input heater power should be greater than 200 W to achieve cathode surface temperature greater than 1,000°C.     

Characteristics of a Cold Cathode Type Penning Source and Low Energy Isotope Separation of High Charge States

Measurements of voltage-, current-and gas flow dependencies of a cold cathode Penning source, using different cathode materials, are reported. The influence of the discharge parameters (arc voltage, arc current, magnetic field and gas flow) on the production of higher charge states was studied. The highest observed charge states were Ar9+ , Kr12+ Xe13+ The cold cathode type Penning source with radial extraction proves to have sufficiently low energy spread to permit isotope separation in the source-magnet field. Results for Ar2+, Kr4+ and Xe7+ as well as emittance measurements are given.     

第二阳极作用改善阴极真空弧沉积中弧放电稳定性的研究

研究了阴极弧等离子体沉积中第二阳极现象改善弧放电稳定性的作用。结果表明：由于弧放电规模增大,等离子体电阻降低,第二阳极现象的存在可大幅度提高造成阴极弧放电不稳定的聚焦磁场阈值。     

Characteristics of Plasma Spraying Torch with a Hollow Cathode

1. IntroductionPlasma spraying has became a welLestablishedand widely-used technology with various industrialapplications[1,2,3]. In traditional plasma sprating,the design of plasma torch has been essentially thesame, based on producing a plasma jet by a dc arcopersted between a stick-type cathode and a nozzleshaped anode[4,5]. The powder is injected radiallyillto the plasma flame either within the anode channel or a short distance from the anode. With radialinjection of powders the heating a…     

磁过滤真空弧沉积中过滤管道的第二阳极作用研究

利用一台磁过滤真空弧沉积装置,初步研究了磁过滤管道对系统弧放电的影响。实验证明,磁过滤管道在阴极真空弧沉积中不仅起到消除大颗粒的作用,还作为阴极真空弧放电的第二阳极对弧放电产生影响。给出了磁过滤阴极真空弧放电的等效电路,并用此电路对磁过滤阴极真空弧放电中的部分实验现象进行了解释。     

The Arc Model in SiO2 Current-limiting Fuse

1. IntroductionIn comparison with other switching appliances,fuse is extraodinarily charasterized by a very higharc voltage and a short breaking time, produced dur-ing breaking the short circuit, therefOre, until now)on composite circuit there have been no equivalent, method of testing the capability for high voltage fuse.The test of breaking capacity for fuses requires a setof power supply which can supply high voltage andhigh current simultaneously. Por alternating current,the power supply i…     

阴极真空弧源磁过滤弯管偏压模式研究

为了改进阴极真空弧等离子体通过磁过滤弯管的传输效率，测定了磁过滤弯管出口离子电流与阴极弧流的关系，结果表明：磁过滤弯管内表面中，靠近大径中心一侧的表面（内侧面）和远离大径中心一侧的表面（外侧面）与等离子体的相互作用是独立的，存在两种向磁过滤弯等内表面运动的离子流：离子碰撞导致的横向扩散离子流和从阴极弧出来的较高能量的惯性离子流。两种离子流通过磁过滤管的传输过程有不同的机制。整个磁过滤弯管偏压较仅仅Bilek板偏压有更高的离子传输效率，Bilek板偏压对磁过滤弯管离子传输起主要作用。     

Simulation of the Effect of a Metal Vapor Arc on Electrode Erosion in Liquid Metal Current Limiting Device

The effect of arc plasma on electrode erosion in a liquid metal current limiter(LMCL)is studied.Based on a simplified two-dimensional magnetohydrodynamic model,the elongated GaInSn metal vapor arc and its contraction process in a liquid metal current limiter are simulated.The distributions of temperature,pressure and velocity of the arc plasma are calculated.The simulation results indicate that the electrode erosion is mainly caused by two high temperature gas jet flows arising from the pressure gradient,which is a result of the non-uniform arc temperature distribution.The gas flows,which act as jets onto the electrode surface,lead to the evaporation of the electrode material form the surface.A redesign structure of the electrode is proposed and implemented according to the analysis,which greatly increased the service life of the electrode.     

低能高束流氩离子源的结构及性能

离子源技术是等离子体研究中的一项重要内容,而低能大束流源则是离子源技术研究中的一个重要方向,因为这样的源在离子束刻蚀、离子束溅射镀膜以及荷能粒子与物质相互作用方面都有广泛的应用;本文采用空心阴极空心阳极结构,用热阴极电子发射弧放电驱动并用磁场约束产生等离子体,用曲面发射引出离子束,研制成了氩气放电溅射离子源;研究了灯丝加热电流、弧压对弧流的影响和弧流与工作气体压力对离子束引出的影响规律.离子源的引出电压在0-4.0 kV之间连续可调,最大引出束流为100 mA,束斑面积为φ6.0 cm,以Ti为溅射靶时的最大溅射沉积率为0.45 nm/s,离子源可连续工作160 h.     

Preliminary Results of Experimental Studies from Low Pressure Inertial Electrostatic Confinement Device

In this study, Turkey’s first low pressure inertial electrostatic confinement (IEC) device, constructed at the Saraykoy Nuclear Research and Training Center (SNRTC-IEC), is introduced and the first results are reported. This device was designed for neutronic fusion studies in terms of D–D reaction. The SNRTC-IEC device consists of spherical chamber 300 mm in diameter and a grid-type spherical cathode in which high negative voltage is applied at the center of chamber. The outer surface of the device held at ground potential has 10 ports to connect the vacuum pump, high voltage load, residual gas analyzer, ion sources and other peripherals. Cathode voltage is 85 kV and it is particularly emphasized that the SNRTC-IEC device is studied at low pressure (1?10 × 10^?4 mbar). The maximum total neutron production rate is measured at around 2.4 × 10⁴ neutrons per second for the medium grid cathode.