Future perspectives of thermal energy storage with metal hydrides

Thermochemical energy storage materials have advantage of much higher energy densities compared to latent or sensible heat storage materials. Metal hydrides show good reversibility and cycling stability combined with high enthalpies. They can be used for short and long-term heat storage applications and can increase the overall flexibility and efficiency of solar thermal energy production. Metal hydrides with working temperatures less than 500 °C were in the focus of research and development over the last years. For the new generation of solar thermal energy plants new hydrides materials with working temperatures above 600 °C must be developed and characterized. In addition to thorough research on new metal hydrides, the construction and engineering of heat storage systems at these high temperatures are challenging. Corrosion problems, hydrogen embrittlement and selection of heat transfer fluids are significant topics for future research activities.     

Research and application of molten salts for sensible heat storage

熔融盐具有液体温度范围宽,黏度低,流动性能好,蒸汽压小,对管路承压能力要求低,相对密度大,比热容高,蓄热能力强,成本较低等诸多优点,已成为一种公认的良好的中高温传热蓄热介质.本文对熔融盐显热蓄热技术原理和发展现状进行了简要概述,包括熔融盐的种类,熔融盐显热蓄热技术的原理,关键技术,研发现状及其在太阳能热发电和间歇性余热利用中的应用.认为开展高温熔融盐传热蓄热介质制备,热性能表征和熔融盐流动与传热性能研究,进而完善整个熔融盐蓄热系统,提高蓄热效率,降低管路腐蚀性,提高系统可靠性仍将是未来熔融盐蓄热技术的研究重点.     

Review on heat transfer analysis in thermal energy storage using latent heat storage systems and phase change materials

Thermal energy storage (TES) is a technology that stocks thermal energy by heating or cooling a storage medium so that the stored energy can be used later for heating and cooling applications and for power generation. TES has recently attracted increasing interest to thermal applications such as space and water heating, waste heat utilisation, cooling, and air conditioning. Phase change materials (PCMs) used for the storage of thermal energy as latent heat are special types of advanced materials that substantially contribute to the efficient use and conservation of waste heat and solar energy. This paper provides a comprehensive review on the development of latent heat storage (LHS) systems focused on heat transfer and enhancement techniques employed in PCMs to effectively charge and discharge latent heat energy, and the formulation of the phase change problem. The main categories of PCMs are classified and briefly described, and heat transfer enhancement technologies, namely dispersion of low‐density materials, use of porous materials, metal matrices and encapsulation, incorporation of extended surfaces and fins, utilisation of heat pipes, cascaded storage, and direct heat transfer techniques, are also discussed in detail. Additionally, a two‐dimensional heat transfer simulation model of an LHS system is developed using the control volume technique to solve the phase change problem. Furthermore, a three‐dimensional numerical simulation model of an LHS is built to investigate the quasi‐steady state and transient heat transfer in PCMs. Finally, several future research directions are provided.     

Review of thermal energy storage for air conditioning systems

Thermal energy storage is very important to eradicate the discrepancy between energy supply and energy demand and to improve the energy efficiency of solar energy systems. Latent heat thermal energy storage (LHTES) is more useful than sensible energy storage due to the high storage capacity per unit volume/mass at nearly constant temperatures. This review presents the previous works on thermal energy storage used for air conditioning systems and the application of phase change materials (PCMs) in different parts of the air conditioning networks, air distribution network, chilled water network, microencapsulated slurries, thermal power and heat rejection of the absorption cooling. Recently, researchers studied the heat transfer enhancement of the thermal energy storage with PCMs because most phase change materials have low thermal conductivity, which causes a long time for charging and discharging process. It is expected that the design of latent heat thermal energy storage will reduce the cost and the volume of air conditioning systems and networks.     

Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage

Six novel polymer-based form-stable composite phase change materials (PCMs), which comprise micro-encapsulated paraffin (MEP) as latent heat storage medium and high-density polyethylene (HDPE)/wood flour compound as supporting material, were prepared by blending and compression molding method for potential latent heat thermal energy storage (LHTES) applications. Micro-mist graphite (MMG) was added to improve thermal conductivities. The scanning electron microscope (SEM) images revealed that the form-stable PCMs have homogeneous constitution and most of MEP particles in them were undamaged. Both the shell of MEP and the matrix prevent molten paraffin from leakage. Therefore, the composite PCMs are described as form-stable PCMs. The differential scanning calorimeter (DSC) results showed that the melting and freezing temperatures as well as latent heats of the prepared form-stable PCMs are suitable for potential LHTES applications. Thermal cycling test indicated the form-stable PCMs have good thermal stability although it was subjected to 100 melt–freeze cycles. The thermal conductivity of the form-stable PCM was increased by 17.7% by adding 8.8 wt% MMG. The results of mechanical property test indicated that the addition of MMG has no negative influence on the mechanical properties of form-stable composite PCMs. Taking one with another, these novel form-stable PCMs have the potential for LHTES applications in terms of their proper phase change temperatures, improved thermal conductivities, outstanding leak tightness of molten paraffin and good mechanical properties.     

Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems

Designing a cost-effective phase change thermal storage system involves two challenging aspects: one is to select a suitable storage material and the other is to increase the heat transfer between the storage material and the heat transfer fluid as the performance of the system is limited by the poor thermal conductivity of the latent heat storage material. When used for storing energy in concentrated solar thermal power plants, the solar field operation temperature will determine the PCM melting temperature selection. This paper reviews concentrated solar thermal power plants that are currently operating and under construction. It also reviews phase change materials with melting temperatures above 300 °C, which potentially can be used as energy storage media in these plants. In addition, various techniques employed to enhance the thermal performance of high temperature phase change thermal storage systems have been reviewed and discussed. This review aims to provide the necessary information for further research in the development of cost-effective high temperature phase change thermal storage systems.     

Medium‐ and high‐temperature latent heat thermal energy storage: Material database,system review,and corrosivity assessment

Latent heat thermal energy storage refers to the storage and recovery of the latent heat during the melting/solidification process of a phase change material (PCM). Among various PCMs, medium‐ and high‐temperature candidates are attractive due to their high energy storage densities and the potentials in achieving high round trip efficiency. Although a few review studies on high‐temperature PCMs have emerged in the past few years, the quantity, completeness, and accuracy of the presented data are relatively poor. Also, an efficient indexing methodology for retrieving useful PCM data is missing in the open literature. In this article, we created an up‐to‐date PCM database following a holistic review of the PCMs in medium‐ and high‐temperature applications over a temperature range of 100°C to 1680°C. Such effort then allows us to develop an accurate indexing tool for the fast selection of suitable PCM candidates and extraction of the related property data. More specifically, the created PCM database covers 496 entries of PCM materials, which are extracted from the scattered research works published during the year 1956 to 2017. The collected information includes both the basic thermo‐physical properties of PCMs (eg, melting temperature, heat of fusion, and thermal conductivity) and crucial design factors during construction and engineering phases (eg, energy storage density, volume expansion, liquid/solid densities, and cost). The reviewed PCMs comprise a wide variety of materials, including fluorides, chlorides, hydrates, nitrates, carbonates, metals and alloys, and other uncommon compounds and salts. In addition, the current work presents a brief review on high‐temperature latent heat thermal energy storage systems categorized into metallic and non‐metallic systems. The corrosivity and stability of PCMs, which are commonly ignored in previous studies, are also examined.     

Review on thermal energy storage with phase change materials and applications

The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy and has the advantages of high-energy storage density and the isothermal nature of the storage process. PCMs have been widely used in latent heat thermal-storage systems for heat pumps, solar engineering, and spacecraft thermal control applications. The uses of PCMs for heating and cooling applications for buildings have been investigated within the past decade. There are large numbers of PCMs that melt and solidify at a wide range of temperatures, making them attractive in a number of applications. This paper also summarizes the investigation and analysis of the available thermal energy storage systems incorporating PCMs for use in different applications.     

A review on thermal energy storage systems in solar air heaters

The drying needs of agricultural, industrial process heat requirements and for space heating, solar energy is one of the prime sources which is renewable and pollution free. As the solar energy is inconsistent and nature dependent, more often there is a mismatch between the solar thermal energy availability and requirement. This drawback could be addressed to an extent with the help of thermal energy storage systems combined with solar air heaters. This review article focuses on solar air heaters with integrated and separate thermal energy storage systems as well as greenhouses with thermal storage units. A comprehensive study was carried out in solar thermal storage units consisting of sensible heat storage materials and latent heat storage materials. As the phase change heat storage materials offer many advantages over the sensible heat storage materials, the researchers are more interested in this system. The charging and discharging characteristics of thermal storage materials with various operational parameters have been reported. All the possible solar air heater applications with storage units have also been discussed.     

Recent progress in diatomite based composite phase change materials for thermal energy storage

硅藻土是一种含量丰富的非金属矿,具有较高的孔隙率,良好的表面结构和热物理性能,因而可作为复合储热材料的载体.本文综述了复合储热材料的种类和制备工艺,并介绍了硅藻土的结构,性能和以硅藻土为载体的复合相变储热材料的研究及应用现状.     

Preparation of capric acid/halloysite nanotube composite as form-stable phase change material for thermal energy storage

A novel form-stable composite as phase change material (PCM) for thermal energy storage was prepared by absorbing capric acid (CA) into halloysite nanotube (HNT). The composite PCM was characterized by TEM, FT-IR and DSC analysis techniques. The composite can contain capric acid as high as 60 wt% and maintain its original shape perfectly without any CA leakage after subjected to 50 melt-freeze cycles. The melting temperature and latent heat of composite (CA/HNT: 60/40 wt%) were determined as 29.34 °C and 75.52 J/g by DSC. Graphite (G) was added into the composite to improve thermal storage performance and the thermal storage and release rates were increased by 1.8 times and 1.7 times compared with the composite without graphite, respectively. Due to its high adsorption capacity of CA, high heat storage capacity, good thermal stability, low cost and simple preparation method, the composite can be considered as cost-effective latent heat storage material for practical applications such as solar energy storage, building energy conservation and agricultural greenhouse in the near future.     

High-temperature phase change materials for thermal energy storage

The development of energy saving technologies is very actual issue of present day. One of perspective directions in developing these technologies is the thermal energy storage in various industry branches. The review considers the modern state of art in investigations and developments of high-temperature phase change materials perspective for storage thermal and a solar energy in the range of temperatures from 120 to 1000 °C. The considerable quantity of mixes and compositions on the basis of fluorides, chlorides, hydroxides, nitrates, carbonates, vanadates, molybdates and other salts, and also metal alloys is given. Thermophysical properties of potential heat storage salt compositions and metal alloys are presented. Compatibility of heat storage materials (HSM) and constructional materials have found its reflection in the present work. Data on long-term characteristics of some HSMs in the course of repeated cycles of fusion and solidification are analyzed. Article considers also other problems which should be solved for creation of commercial high-temperature heat storage devices with use of phase change materials.     

Highly conductive composites made of phase change materials and graphite for thermal storage

Conventional phase change materials (PCMs) are already well known for their high thermal capacity and constant working temperature for thermal storage applications. Nevertheless, their low thermal conductivity (around 1 W m⁻¹ K⁻¹) leads to low and decreasing heat storage and discharge powers. Up to now, this major drawback has drastically inhibited their possible applications in industrial or domestic fields. The use of graphite to enhance the thermal conductivity of those materials has been already proposed in the case of paraffin but the corresponding applications are restricted to low-melting temperatures (below 150 °C). For many applications, especially for solar concentrated technologies, this temperature range is too low. In the present paper, new composites made of salts or eutectics and graphite flakes, in a melting temperature range of 200-300 °C are presented in terms of stability, storage capacity and thermal conductivity. The application of those materials to thermal storage is illustrated through simulated results according to different possible designs. The synergy between the storage composite properties and the interfacial area available for heat transfer with the working fluid is presented and discussed.     

Review on solar thermal energy storage technologies and their geometrical configurations

Because of the unstable and intermittent nature of solar energy availability, a thermal energy storage system is required to integrate with the collectors to store thermal energy and retrieve it whenever it is required. Thermal energy storage not only eliminates the discrepancy between energy supply and demand but also increases the performance and reliability of energy systems and plays a crucial role in energy conservation. Under this paper, different thermal energy storage methods, heat transfer enhancement techniques, storage materials, heat transfer fluids, and geometrical configurations are discussed. A comparative assessment of various thermal energy storage methods is also presented. Sensible heat storage involves storing thermal energy within the storage medium by increasing temperature without undergoing any phase transformation, whereas latent heat storage involves storing thermal energy within the material during the transition phase. Combined thermal energy storage is the novel approach to store thermal energy by combining both sensible and latent storage. Based on the literature review, it was found that most of the researchers carried out their work on sensible and latent storage systems with the different storage media and heat transfer fluids. Limited work on a combined sensible-latent heat thermal energy storage system with different storage materials and heat transfer fluids was carried out so far. Further, combined sensible and latent heat storage systems are reported to have a promising approach, as it reduces the cost and increases the energy storage with a stabilized outflow of temperature from the system. The studies discussed and presented in this paper may be helpful to carry out further research in this area.     

The micro‐/nano‐PCMs for thermal energy storage systems: A state of art review

With advancement in technology—nanotechnology, various thermal energy storage (TES) materials have been invented and modified with promising thermal transport properties. Solid‐liquid phase change materials (PCMs) have been extensively used as TES materials for various energy applications due to their highly favourable thermal properties. The class of PCMs, organic phase change materials (OPCMs), has more potential and advantages over inorganic phase change materials (IPCMs), having high phase change enthalpy. However, OPCMs possess low thermal conductivity as well as density and suffer leakage during the melting phase. The encapsulation technologies (ie, micro and nano) of PCMs, with organic and inorganic materials, have a tendency to enhance the thermal conductivity, effective heat transfer, and leakage issues as TES materials. The encapsulation of PCMs involves several technologies to develop at both micro and nano levels, called micro‐encapsulated PCMs (micro‐PCM) and nano‐encapsulated PCMs (nano‐PCM), respectively. This study covers a wide range of preparation methods, thermal and morphological characteristics, stability, applications, and future perspective of micro‐/nano‐PCMs as TES materials. The potential applications, such as solar‐to‐thermal and electrical‐to‐thermal conversions, thermal management, building, textile, foam, medical industry of micro‐ and nano‐PCMs, are reviewed critically. Finally, this review paper highlights the emerging future research paths of micro‐/nano‐PCMs for thermal energy storage.     

金属基相变材料的研究进展及应用

金属基相变材料由于具有储能密度高、热稳定性好、热导率高等优点,在潜热热能储存系统中具有极大的优势。本文回顾了金属基相变材料的发展历程,归纳了金属基相变材料的性能参数,总结了各种热物性的测量方法,探讨了金属基相变材料与容器材料的相容性问题,分析了金属基相变材料在太阳能热发电、工业余热回收和电力削峰填谷中的应用前景。金属基相变材料的高温腐蚀性是目前限制其在热控制中应用的主要因素。为了实现金属基相变材料的广泛应用,需要重点解决金属基相变材料的封装问题。     

Metal hydride materials for solid hydrogen storage: A review

Hydrogen is an ideal energy carrier which is considered for future transport, such as automotive applications. In this context storage of hydrogen is one of the key challenges in developing hydrogen economy. The relatively advanced storage methods such as high-pressure gas or liquid cannot fulfill future storage goals. Chemical or physically combined storage of hydrogen in other materials has potential advantages over other storage methods. Intensive research has been done on metal hydrides recently for improvement of hydrogenation properties. The present review reports recent developments of metal hydrides on properties including hydrogen-storage capacity, kinetics, cyclic behavior, toxicity, pressure and thermal response. A group of Mg-based hydrides stand as promising candidate for competitive hydrogen storage with reversible hydrogen capacity up to 7.6 wt% for on-board applications. Efforts have been devoted to these materials to decrease their desorption temperature, enhance the kinetics and cycle life. The kinetics has been improved by adding an appropriate catalyst into the system and as well as by ball-milling that introduces defects with improved surface properties. The studies reported promising results, such as improved kinetics and lower decomposition temperatures, however, the state-of-the-art materials are still far from meeting the aimed target for their transport applications. Therefore, further research work is needed to achieve the goal by improving development on hydrogenation, thermal and cyclic behavior of metal hydrides.     

HEAT TRANSFER ENHANCEMENT IN A LATENT HEAT STORAGE SYSTEM

Commercial acceptance and the economics of solar thermal technologies are tied to the design and development of efficient, cost-effective thermal storage systems. Thermal storage units that utilize latent heat storage materials have received greater attention in the recent years because of their large heat storage capacity and their isothermal behavior during the charging and discharging processes. One major issue that needs to be addressed is that most phase-change materials (PCM) with high energy storage density have an unacceptably low thermal conductivity and hence heat transfer enhancement techniques are required for any latent heat thermal storage (LHTS) applications. In the present paper the various heat transfer enhancement methods for LHTS systems are discussed. Three different experiments to augment heat transfer were conducted and the findings are reported.     

化学蓄热材料的开发与应用研究进展

作为化学能与热能相互转换的核心技术,化学反应蓄热是21世纪最为重要的储能技术之一。与传统的潜热储能方式相比较而言,化学反应蓄热的能量储存密度有着数量级的提升,其在工作温度范围以及材料稳定性上的优势显著。本文针对金属氢氧化物、金属氢化物、金属碳酸盐、结晶水合物、金属盐氨合物等几种当前主要的化学蓄热材料,重点阐述了各自的应用机制和工作条件,分析了各种材料的研究现状和亟需解决的科学及应用问题,指出复合以及掺杂型材料的优化制备是化学蓄热技术未来发展的主要方向。