Distributed generation and trigeneration: Energy saving opportunities in Italian supermarket sector

This paper presents an analysis of the potential for introducing distributed generation systems in the supermarket sector in the light of Italian legislation (inasmuch as concerns tax incentives and regulations) with a view to arriving at some generally applicable criteria. The energy users in question are characterized by a strong demand for energy for refrigeration for food preservation and for ambient air-conditioning during the summer.This makes supermarkets particularly suitable for trigeneration applications with the prime mover coupled with absorption systems. This study analyses the feasibility of implementing trigeneration systems for the combined production of electricity and ambient heating and air-conditioning energy or, alternatively, for the combined generation of electrical energy and refrigeration for the preservation of food. Finally, the hypothesis of combining trigeneration systems with photovoltaic systems aimed at maximizing the energy saving achievable was also considered. This paper analyses the various technologies from a technical, economic and environmental standpoint, enabling advantages and disadvantages to be identified in relation to a real case.     

Solar absorption cooling in Spain: Perspectives and outcomes from the simulation of recent installations

In spite of the fact that Spain is one of the EU countries with the highest solar resource on annual basis, the huge seasonal variation in solar radiation availability and the relatively short period with heating demand, make it difficult to reach significant contributions of solar energy to the buildings heating energy demand. This compromises the economic viability of big solar collector areas per capita, and introduces technical difficulties for the dissipation of the excess solar energy available in the summer months. On the other hand, in a large part of the Spanish territory, in other to reach adequate comfort conditions in our buildings, the energy demand for cooling is more important or of the same order than the heating demand. Cooling energy demand is now experiencing a fast growing rate as this comfort requirement becomes internalized. Domestic air conditioning equipments based on vapour compression cycles are being used to reach comfort conditions in some of the rooms of buildings that were designed without taking into account cooling requirements. In spite of their so far small contribution to the total building sector energy demand, these equipments are already imposing important constraints on the environment and the electricity distribution system. Solar absorption cooling arises as an interesting alternative, which at the same time allows reaching a higher solar contribution to the heating demand. However, solar cooling installations present several peculiarities with respect to the more known DHW or even heating installations, which require to incorporate a more detailed approach and additional considerations in the design and performance evaluation processes. Besides, some limitations still persist in solar absorption systems, which could make them loose their market potential for the benefit of other solar cooling options. In this paper, we present some conclusions arising from the experience gained in detailed TRNSYS dynamical simulation of some of the first commercial solar heating and cooling installations recently implemented in Spain, and analyse their perspectives in comparison with other solar cooling options.     

District heating and cooling for business buildings in Madrid

Energy needs for heating and cooling in Spain are of paramount interest in the context of the European roadmap to a decarbonized environment; because of that, it is highly desirable that more examples of district heating and cooling networks are developed. The present work evaluates the implementation of one of them into the climatic environment of Madrid. It consists on a complex of business office buildings with a total useful surface of 50,000 m², linked with heating and cooling rings of 1 km of loop length. Basic energy needs of buildings lead to the following design values: 1.7 MW of electricity, 1.3 MW of heating and 2 MW of cooling. They will be supplied by the trigeneration plant here proposed, which relies on an internal combustion engine.The high demand of cooling for air conditioning makes the dimensioning of the engine critical because of the large differences between the heat demand for summer and the one for winter. If the total amount of the cooling demand is covered with an absorption chiller, the heat demand during the summer reaches about 5 MW. In consequence, a critical decision has to be taken relative to the way the cooling demand is attended: with an absorption chiller (single or double effect) or with a conventional chiller powered by electricity. Applying the criteria developed in the present work, which are focused on maximum primary energy reduction, the fraction of the cooling demand to be met with each technology is determined as a function of the engine nominal power, on the grounds of the instantaneous demand.The high cooling demand during the summer season suggests the inclusion of a thermal solar collector field, to be used for complementing the waste heat rejection from the engine to drive the absorption chiller. During the winter, the heat provided by the solar field could be applied in attending a fraction of the heating demand. Thus a hybrid Trigeneration Plant is introduced. This way, over sizing of the engine can be avoided, as the electric demand is small.The analysis is based on the solution of energy and mass balance equations for a trigeneration plant. Monthly demands and environmental conditions (ambient temperature and solar irradiance) are introduced as input data into the model. Monthly and annual primary energy consumption and CO₂ emission reductions are obtained as outputs. Economical data, such as fuel and operating costs, electricity prices, tariffs and subsidies are considered in order to optimize the size of the plant in terms of its payback period.     

不同地区住宅能耗与太阳能吸收式空调系统匹配性分析与模拟研究

为了满足农村住宅清洁用能的需求,多种形式的能源系统逐渐开始应用于广大的农村地区。随着太阳能集热器集热效率的提高,热驱动机组各项性能不断改善,这样有利于太阳能吸收式空调系统在农村地区的应用。为了研究太阳能吸收式空调系统与农村住宅全年能耗的匹配问题,文章首先建立了DeST住宅模型,然后利用TRNSYS软件建立了太阳能吸收式空调系统模型,最后根据模拟结果对国内不同气候区内农村住宅供热季、供冷季的平均热负荷值,以及全年的能耗进行分析。此外,文章还分析了典型日太阳能吸收式空调系统的运行策略与效果。分析结果表明:在无辅助热源的条件下,太阳能集热器的集热温度会大于80℃,满足空调机组的热驱动温度,因此可以作为太阳能吸收式空调系统的的热源;当启动温度为85℃时,空调机组的制冷量可以达到8 kW,性能系数COP为0.733。     

Experimental tests of a small‐scale microturbine with a liquid desiccant cooling system

In a trigeneration plant, the thermal energy recovered from the prime mover is exploited to produce a cooling effect. Although this possibility allows the working hours of the plant to be extended over the heating period, providing summer air conditioning through thermally activated technologies, it is rather difficult to find in the literature experimental data on trigeneration plants operation, and the availability of performance characteristics at off‐design conditions is anyway limited. The paper has the aim of showing the experimental data of a real trigeneration system installed at the Politecnico di Torino (Turin, Italy), composed of a natural gas 100 kW_el microturbine coupled to a liquid desiccant system. The data are presented for both cogeneration and trigeneration configurations, and for full and partial load operations. An energetic and economic performance assessment at rated power operation is presented, and compared with the partial load operation strategy. The primary energy savings are calculated through a widely accepted methodology, proposed by the European Union, and through another methodology, reported in literature, which seems to the Authors more suitable to describe the energetic performances of trigeneration plants. Copyright © 2012 John Wiley & Sons, Ltd.     

Performance analysis & energy benefits of a desiccant based solar assisted trigeneration system in a building

In this paper, performance details and operational benefits of a large scale solar trigeneration system that provides for solar assisted desiccant cooling, heating and hot water generation installed in a teaching institute building have been reported. A two-rotor desiccant system designed for handling 12 000 m3/hr of air was integrated into existing plant to provide a net reduction in energy consumption over the pre-existing heating ventilation and air-conditioning and domestic hot water systems. The system is controlled and monitored by a building management system which has been used to investigate and analyse the typical system behaviour. Heat from solar energy contributed consistently to reduce gas usage for water heating and on an annual basis showed a reduction of 21% of consumed energy. The solar energy contribution for space heating varied over winter months and during some months it was observed to contribute more than 50% of the total energy requirements for space heating. Under suitable ambient conditions, approximately 35% of total building cooling load was met by the solar driven desiccant cooling system. Continuous monitoring has also helped understand some of the operational issues of the system.     

制冷低温技术的节能应用与太阳能固体吸附式制冷技术研究

介绍了制冷低温技术领域中的一些国内外研究热点，对当前所涉及的一些较先进的制冷空调技术原理作了分析探讨，并结合当前节能工作的开展对这些新技术的运用作了概括总结。还对以太阳能作为驱动热源的吸附式制冰机的原理、能量转换及热力循环过程进行了较为详细的阐述，以期该技术能像太阳能热水器一样尽快走入大众之家。     

Residential solar air conditioning: Energy and exergy analyses of an ammonia–water absorption cooling system

Large scale heat-driven absorption cooling systems are available in the marketplace for industrial applications but the concept of a solar driven absorption chiller for air-conditioning applications is relatively new. Absorption chillers have a lower efficiency than compression refrigeration systems, when used for small scale applications and this restrains the absorption cooling system from air conditioning applications in residential buildings. The potential of a solar driven ammonia–water absorption chiller for residential air conditioning application is discussed and analyzed in this paper. A thermodynamic model has been developed based on a 10 kW air cooled ammonia–water absorption chiller driven by solar thermal energy. Both energy and exergy analyses have been conducted to evaluate the performance of this residential scale cooling system. The analyses uncovered that the absorber is where the most exergy loss occurs (63%) followed by the generator (13%) and the condenser (11%). Furthermore, the exergy loss of the condenser and absorber greatly increase with temperature, the generator less so, and the exergy loss in the evaporator is the least sensitive to increasing temperature.     

A comprehensive review of solar thermoelectric cooling systems

The negative environmental impacts of burning fossil fuels have forced the energy research community seriously to consider renewable sources, such as naturally available solar energy. This paper provides an overview of solar thermoelectric (TE) cooling systems. Thus, this review presents the details referring to TE cooling parameters and formulations of the performance indicators and focuses on the development of TE cooling systems in recent decade with particular attention on advances in materials and modeling and design approaches. Additionally, the TE cooling applications have been also reviewed in aspects of electronic cooling, domestic refrigeration, air conditioning, and power generation. Finally, the possibility of solar TE cooling technologies application in “nearly zero” energy buildings is briefly discussed, and some future research directions are included. This research shows that TE cooling systems have advantages over conventional cooling devices, including compact in size, light in weight, high reliability, no mechanical moving parts, no working fluid, being powered by direct current, and easily switching between cooling and heating modes.     

Operational results of an intermittent absorption cooling unit

The concept of solar cooling is appealing because the cooling load is in phase with the intensity of solar energy. Many system arrangements or cycles are employed to achieve solar cooling, such as Absorption, desiccant or Rankine‐vapour compression systems. The technical feasibility of driving an absorption‐cooling unit by a low‐temperature heat source (such as solar energy using a simple flat‐plate collector) for air‐conditioning applications is investigated in this work. This study aims to design and construct a prototype for an intermittent absorption refrigeration system and to examine its implementation. The operating characteristics of the considered unit are extensively investigated. In order to accomplish this strategy, the prototype was integrated in a test rig designed for this purpose and equipped with the necessary measuring instruments to determine the required operating criteria of the unit. The energy added or extracted to or from the different unit components is calculated and the system performance is analysed. The C.O.P of the unit is found to be 19% which is 2% lower than the designed value, which could be regarded as an encouraging result for more studies in this field. Copyright © 2002 John Wiley & Sons, Ltd.     

Integration of trigeneration system and thermal storage under demand uncertainties

In a commercial building, a large portion of electricity is usually consumed in air conditioning to control indoor-air temperature and humidity. Energy savings or efficient production in air conditioning system is, therefore, crucial. In recent years, trigeneration systems, which provide electricity, heating and cooling, and thermal storage systems, which temporarily store cooling energy to smooth its production pattern, are attracting more attentions. These systems with different operating principles are usually designed based on nominal or peak loadings. With altering seasonal or day/night cooling demands, the performance and overall economics of the design may deprive.     

Solid oxide fuel cell/gas turbine trigeneration system for marine applications

Shipping contributes 4.5% to global CO₂ emissions and is not covered by the Kyoto Agreement. One method of reducing CO₂ emissions on land is combined cooling heating and power (CCHP) or trigeneration, with typical combined thermal efficiencies of over 80%. Large luxury yachts are seen as an ideal entry point to the off-shore market for this developing technology considering its current high cost.This paper investigates the feasibility of combining a SOFC-GT system and an absorption heat pump (AHP) in a trigeneration system to drive the heating ventilation and air conditioning (HVAC) and electrical base-load systems. A thermodynamic model is used to simulate the system, with various configurations and cooling loads. Measurement of actual yacht performance data forms the basis of this system simulation.It is found that for the optimum configuration using a double effect absorption chiller in Ship 1, the net electric power increases by 47% relative to the electrical power available for a conventional SOFC-GT-HVAC system. This is due to more air cooled to a lower temperature by absorption cooling; hence less electrical cooling by the conventional HVAC unit is required. The overall efficiency is 12.1% for the conventional system, 34.9% for the system with BROAD single effect absorption chiller, 43.2% for the system with double effect absorption chiller. This shows that the overall efficiency of a trigeneration system is far higher when waste heat recovery happens.The desiccant wheel hardly reduces moisture from the outdoor air due to a relative low mass flow rate of fuel cell exhaust available to dehumidify a very large mass flow rate of HVAC air, Hence, desiccant wheel is not recommended for this application.     

Prospects for solar cooling – An economic and environmental assessment

Producing refrigeration and/or air conditioning from solar energy remains an inviting prospect, given that a typical building’s cooling load peaks within 2 or 3 h of the time of maximum solar irradiation. The attractiveness of “free” cooling obtained from the sun has spawned a wealth of research over the last several decades, as summarized in a number of review articles. Obstacles—especially high initial costs—remain to the widespread commercialization of solar cooling technologies. It is not clear at the present time if thermally driven systems will prove to be more competitive than electrically driven systems. We therefore describe a technical and economic comparison of existing solar cooling approaches, including both thermally and electrically driven. We compare the initial costs of each technology, including projections about future costs of solar electric and solar thermal systems. Additionally we include estimates of the environmental impacts of the key components in each solar cooling system presented. One measure of particular importance for social acceptance of solar cooling technologies is the required “footprint,” or collector area, necessary for a given cooling capacity. We conclude with recommendations for future research and development to stimulate broader acceptance of solar cooling. The projections made show that solar electric cooling will require the lowest capital investment in 2030 due to the high COPs of vapor compression refrigeration and strong cost reduction targets for PV technology.     

Performance analysis of a trigeneration system based on a micro gas turbine and an air-cooled,indirect fired,ammonia–water absorption chiller

The objective of this paper is to experimentally determine the efficiency and viability of the performance of an advanced trigeneration system that consists of a micro gas turbine in which the exhaust gases heat hot thermal oil to produce cooling with an air cooled absorption chiller and hot water for heating and DHW. The micro gas turbine with a net power of 28 kW produces around 60 kW of heat to drive an ammonia/water air-cooled absorption chiller with a rated capacity of 17 kW. The trigeneration system was tested in different operating conditions by varying the output power of the micro gas turbine, the ambient temperature for the absorption unit, the chilled water outlet temperature and the thermal oil inlet temperature. The modelling performance of the trigeneration system and the electrical modelling of the micro gas turbine are presented and compared with experimental results. Finally, the primary energy saving and the economic analysis show the advantages and drawbacks of this trigeneration configuration.     

Solar space heating and cooling for Spanish housing: Potential energy savings and emissions reduction

An experimental solar energy facility was designed to meet as much of the heating demand in a typical Spanish dwelling as possible. With a view to using the facility during the summer and preventing overheating-induced deterioration of the solar collectors in that season of the year, an absorption chiller was fitted to the system to produce solar-powered air conditioning. The facility operated in solar space heating mode in the winter of 2008–2009 and in cooling mode during the summer of 2008. The design was based on a new type of flat plate vacuum solar collectors that delivered higher efficiency than conventional panels. This type of collectors can reach temperatures of up to 110 °C in the summer and up to 70 °C on the coldest winter days. The solar facility comprised a 48-m² (with a net area of 42 m²) solar collector field, a 25-kW plate heat exchanger, a 1500-l storage tank, a 4.5-kW (Rotartica) air-cooled absorption chiller and several fan coils. The facility was tested by using it to heat and cool an 80-m² laboratory located in Madrid. As the average area of Spanish homes is 80 m², the findings were generally applicable to national housing. The solar facility was observed to be able to meet 65.3% of the space heating demand. For air conditioning, the system covered 46% of the demand, but with high indoor temperatures. In other words, the collector field was found to be able to air condition only half of the home (40 m²). Lastly, the savings in CO₂ emissions afforded by the use of this facility compared to conventional air conditioning were calculated, along with its amortisation period. These results have been extrapolated calculating the potential energy savings and emissions reduction for all the Spanish households.     

太阳能相变蓄热应用于吸收式制冷的分析

介绍了一种将太阳能相变蓄热技术应用于两级吸收式制冷的新型空调系统,简要分析了该系统的装置结构、工作原理和使用优点。对相变蓄热装置放热过程中放热盘管出水温度随放热时间的变化关系进行了实验测量,并对两级吸收式制冷系统效率进行了分析。通过研究可知,该太阳能空调系统有效解决了以往系统不稳定性和间断性问题;太阳能相变蓄热装置具有体积小、蓄热量大、放热速率大、连续放热温度均匀、便于控制热源加热温度等特点,适合储存太阳能并为吸收式制冷系统提供加热热源。综合考虑系统设备简单,加工要求低的制造特点,所以吸收式制冷以太阳能等低品位热源驱动有着良好的发展前景。     

Energy harvesting, reuse and upgrade to reduce primary energy usage in the USA

Two-thirds of input energy for electricity generation in the USA is lost as heat during conversion processes. Additionally, 12.5% of primary fuel and 20.3% of electricity are employed for space heating, water heating, and refrigeration where low-grade heat could suffice. The potential for harnessing waste heat from power generation and thermal processes to perform such tasks is assessed. By matching power plant outlet streams with applications at corresponding temperature ranges, sufficient waste heat is identified to satisfy all USA space and water heating needs. Sufficient high temperature exhaust from power plants is identified to satisfy 27% of residential air conditioning with thermally activated refrigeration, or all industrial refrigeration and process heating from 100 to 150 °C. Engine coolant and exhaust is sufficient to satisfy all air conditioning and 68% of electrical demands in vehicles. Overall, this study demonstrates the potential to reduce USA primary energy demand by 12% and CO₂ emissions by 13% through waste heat recovery. A detailed analysis of thermal energy demand in pulp and paper manufacturing is conducted to demonstrate the methodology for improving the fidelity of this approach. These results can inform infrastructure and development to capture heat that would be lost today, substantially reducing USA energy intensity.     

Experimental study on house cooling and heating with solar energy using flat plate collector

The OSE Project aims at developing the technology to utilize solar energy for heating, cooling and hot water supply on the basis of various technology for energy conservation in buildings. For the first step of this project a solar heating and cooling system with flat plate collectors and absorption refrigeration machine was installed in a house in 1974. This paper reports outlines of the system and operating results.     

Thermodynamic analysis of an existing coal-fired power plant for district heating/cooling application

In a conventional coal-fired power plant, which is only designed for electricity generation, 2/3 of fuel energy is wasted through stack gases and cooling water of condensers. This waste energy could be recovered by trigeneration; modifying the plants in order to meet district heating/cooling demand of their locations. In this paper, thermodynamical analysis of trigeneration conversion of a public coal-fired power plant, which is designed only for electricity generation, has been carried out. Waste heat potentials and other heat extraction capabilities have been evaluated. Best effective steam extraction point for district heating/cooling system; have been identified by conducting energetic and exergetic performance analyses. Analyses results revealed that the low-pressure turbine inlet stage is the most convenient point for steam extraction for the plant analyzed.