3,4-二氧乙基噻吩及其聚合物的制备与应用进展

聚(3,4-二氧乙基噻吩)(PEDOT)是目前发现的导电态最稳定的导电高分子之一,对聚PEDOT及其单体3,4-二氧乙基噻吩(EDOT)的制备方法进行了综述,并介绍了PEDOT在抗静电、电解电容器、有机光电材料和传感器领域的研究和应用。     

浓乳液模板法制备导电聚苯乙烯泡沫材料

以两亲性导电聚合物聚(3,4-乙烯二氧噻吩)-聚苯乙磺酸（PEDOT/PSS）作为表面活性剂,碳纳米管为导电填料,通过浓乳液模板法制备了聚苯乙烯导电泡沫复合材料（PS-MWCNTs）。用扫描电镜观察了不同碳纳米管负载量对材料泡孔形貌的影响,并通过导电性能测试研究了材料的电导率随碳纳米管及导电表面活性剂含量的变化规律。结果表明,填料负载量可以影响泡沫材料的泡孔形态与导电性能,并且具有表面活性剂性能的导电聚合物的引入大大提高了PS-MWCNTs泡沫材料的导电性。     

导电高分子在电磁屏蔽材料中的应用

介绍导电高分子材料的分类和电磁屏蔽的基本理论,综述了导电高分子电磁屏蔽材料的研究进展,对聚苯胺、聚吡咯、聚噻吩和聚苯亚乙烯等导电高分子在电磁屏蔽材料中的应用进行了讨论,并展望了导电高分子电磁屏蔽材料的发展趋势。     

导电高分子PEDOT／PSS保护银纳米颗粒的制备与表征

利用导电高分子聚（3，4-二氧乙基噻吩）／聚（对苯乙烯磺酸）（PEDOT／PSS）作保护剂，制备了银纳米颗粒，用UV-Vis和TEM对其进行了表征．结果表明，选择合适量的PEDOT／PSS保护剂可以得到大小分布较窄银纳米颗粒．     

4,7-二（2,3-二氢噻吩并[3,4-b][1,4]二噁英-5-基）苯并[1,2,5]噻二唑的合成及其电聚合

聚噻吩的重要衍生物聚（3,4-乙撑二氧噻吩）（PEDOT）是应用最成功的导电高分子聚合物之一。以苯并噻二唑为受体单元,设计合成了前驱体化合物4,7-二（2,3-二氢-噻吩并[3,4-b][1,4]二噁英-5-基）苯并[1,2,5]噻二唑（EDOT-BT-EDOT）,发现其具有优异的桔红色发光性能,对其进行电聚合能够获得相应聚合物材料P（EDOTBT-EDOT）。聚合物材料表现出良好的电化学活性和稳定性以及平整致密的表面形貌。     

导电有机高分子材料研究进展

综述了近年来国内外导电有机高分子材料研究进展情况。论述了聚苯胺、聚噻吩、聚吡咯及其衍生物等导电有机高分子材料的制备方法和性质。介绍了导电有机高分子材料的实际应用领域。     

用聚3,4-乙撑二氧噻吩对聚丙烯腈进行导电改性的研究

采用原位化学氧化聚合方法在聚丙烯腈纤维表面生成聚3,4-乙撑二氧噻吩,制备得到纤维表面均匀覆盖聚3,4-乙撑二氧噻吩的改性导电纤维,其电导率约为1×10-3S/cm。纤维表面与导电聚合物的相互作用改善了原纤维的耐热性能,并对其力学性能没有造成伤害。     

导电聚合物有序超薄膜性质

采用修饰多层LB膜的方法制备导电聚合物聚3,4乙烯二氧噻吩/聚苯乙烯磺酸(PEDOT-PSS)/十八胺(ODA)及硬脂酸(SA)复合层状有序膜.实验表明,PEDOT-PSS纳米粒子对单分子层具有包裹作用,形成了稳定的复合单分子膜;二次离子质谱(SIMS)和小角x射线反射(XRR)分析表明ODA-SA/PEDOT-PSS...     

聚（3-己基噻吩）-聚苯乙烯嵌段共聚物的一锅法制备

采用具有聚苯乙烯高分子链为配位基团的聚合催化剂，催化2,5-二溴-3-己基噻吩单体进行Kumada缩聚反应，利用一锅法制备了聚（3-己基噻吩）-聚苯乙烯嵌段共聚物。结果表明：采用一锅法，在室温、常压条件下进行一步聚合直接生成嵌段共聚物，反应过程简单，聚（3-己基噻吩）与聚苯乙烯嵌段对接率接近100%；与聚（3-己基噻吩）相比，聚（3-己基噻吩）-聚苯乙烯嵌段共聚物的结晶性能更好。     

可溶性导电高分子的合成与研究

研究了导电高分子聚 - 3 -庚基噻吩及单体 3 -庚基噻吩的合成 ,对高分子性能进行测试和分析     

以低分子量聚乙烯基苯磺酸钠为模板的聚3,4-二氧乙烯噻吩水分散体的制备及性能

通过RAFT聚合,制备了低分子量的聚乙烯基苯磺酸钠（PSS）;其次以低分子量的聚乙烯基苯磺酸钠为模板制备了聚3,4-二氧乙烯噻吩（PEDOT）：聚乙烯基苯磺酸钠（PSS）水分散体,研究了作为模板的聚乙烯基苯磺酸钠的不同分子量对PEDOT：PSS水分散体结构和性能的影响。结果显示：通过核磁氢谱（¹H NMR）表征,证明成功制备了分子量为3900,4900,9600和18300的聚乙烯基苯磺酸钠。用荧光探针法发现低分子量PSS在水中能形成胶束,临界胶束浓度在10^-6g·ml^-1左右。用四探针表面电阻测试发现,低分子量PSS为模板可明显提高PEDOT薄膜的导电性,最大提高了近3倍。用紫外可见分光光度计（UV）研究发现,以低分子量PSS为模板使PEDOT的透明性有一定的下降,这主要是由于RAFT试剂部分和PEDOT：PSS的相分离造成的。热稳定性的测试表明,低分子量PSS为模板对PEDOT的热稳定性没有明显的影响。     

ABA triblock copolymers from poly(p‐dioxanone) and poly(ethylene glycol)

Poly(p‐dioxanone)–poly(ethylene glycol)–poly(p‐dioxanone) ABA triblock copolymers (PEDO) were synthesized by ring‐opening polymerization from p‐dioxanone using poly(ethylene glycol) (PEG) with different molecular weights as macroinitiators in N₂ atmosphere. The copolymer was characterized by ¹H NMR spectroscope. The thermal behavior, crystallization, and thermal stability of these copolymers were investigated by differential scanning calorimetry and thermogravimetric measurements. The water absorption of these copolymers was also measured. The results indicated that the content and length of PEG chain have a greater effect on the properties of copolymers. This kind of biodegradable copolymer will find a potential application in biomedical materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1092–1097, 2006     

可逆加成-断裂链转移聚合制备聚氯乙烯-b-聚乙二醇-b-聚氯乙烯共聚物

合成了含黄原酸酯端基的聚乙二醇（X-PEG-X）大分子链转移剂,并以其为可逆加成-断裂链转移试剂调控氯乙烯（VC）溶液和悬浮聚合,合成聚氯乙烯-b-聚乙二醇-b-聚氯乙烯（PVC-b-PEG-b-PVC）三嵌段共聚物。X-PEG-X调控VC溶液聚合得到的共聚物的分子量随聚合时间增加而增大,分子量分布指数小于1.65。X-PEG-X具有水/油两相分配和可显著降低水/油界面张力的特性,以X-PEG-X为链转移剂和分散剂,通过自稳定悬浮聚合也可合成PVC-b-PEG-b-PVC共聚物,共聚物颗粒无皮膜结构,分子量随聚合时间增加而增大;由于VC悬浮聚合具有聚合物富相和单体富相两相聚合特性,共聚物分子量分布指数略大于溶液聚合共聚物。通过乙酸乙烯酯（VAc）扩链反应进一步证实了PVC-b-PEG-b-PVC的“活性”,并合成PVAc-b-PVC-b-PEG-b-PVC-b-PVAc共聚物。水接触角测试表明PVC-b-PEG-b-PVC的亲水性优于PVC。     

Preparation and performance of a transparent poly(3,4‐ethylene dioxythiophene)–poly(p‐styrene sulfonate‐co‐acrylic acid sodium) film with a high stability and water resistance

Poly(p‐styrene sulfonate‐co‐acrylic acid sodium) (PSA) from the copolymerization of acrylic acid sodium and p‐styrene sulfonate monomers were used to dope poly(3,4‐ethylene dioxythiophene) (PEDOT) to generate PEDOT–PSA antistatic dispersions. Compared to those of the PEDOT–poly(p‐styrene sulfonate sodium) (PSS), the physical and electrical properties of the PEDOT–PSA conductive liquids were much better. The PEDOT–PSA films possessed a better water resistance without a decrease in the conductivity. The sheet resistance of the PEDOT–PSA–poly(ethylene terephthalate) (PET) films was about 1.5 × 10⁴ Ω/sq with a 100 nm thickness, the same as the PEDOT–PSS–PET films. The transmittance of the PEDOT–PSA–PET films exceeded 88%. Furthermore, the environmental dispersity of the PEDOT–PSA antistatic dispersion was apparently improved by the dopant PSA so that the stability was extraordinarily promoted. Meanwhile, the water resistances of the PEDOT–PSA–PET and PEDOT–PSA films were also enhanced. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45163.     

Biodegradability of poly(ethylene terephthalate) copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)

Poly(ethylene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10–40mol% (in feed) of poly(ethylene glycol) (E) and poly(tetramethylene glycol) (B), with molecular weight (MW) of E and B 200–7500 and 1000, respectively. The reduced specific viscosity of copolymers increased with increasing MW and content of polyglycol comonomer. The temperature of melting (T_m), cold crystallization and glass transition (T_g) decreased with the copolymerization. T_m depression of copolymers suggested that the E series copolymers are the block type at higher content of the comonomer. T_g was decreased below room temperature by the copolymerization, which affected the crystallinity and the density of copolymer films. Water absorption increased with increasing content of comonomer, and the increase was much higher for E1000 series films than B1000 series films. The biodegradability was estimated by weight loss of copolymer films in buffer solution with and without a lipase at 37°C. The weight loss was enhanced a little by the presence of a lipase, and increased abruptly at higher comonomer content, which was correlated to the water absorption and the concentration of ester linkages between PET and PEG segments. The weight loss of B series films was much lower than that of E series films. The abrupt increase of the weight loss by alkaline hydrolysis is almost consistent with that by biodegradation.     

Surface modification of poly(ethylene terephthalate) film by coating with poly(ethylene glycol)‐grafted polystyrene

The poly(ethylene glycol) (PEG)‐grafted styrene (St) copolymer, which was formed as a nanosphere, was used as an agent to modify the surface of poly(ethylene terephthalate) (PET) film. The graft copolymer was dissolved into chloroform and coated onto the PET film by dip–coating method. The coated amount depends on the content ratios of PEG and St, the solution concentration, and the coating cycles. The graft copolymers having a low molecular weight of PEG‐ or St‐rich content was fairly stable on washing in sodium dodecyl sulfate (SDS) aqueous solution. It was confirmed that the PET surface easily altered its surface property by the coating of the graft copolymers. The contact angles of the films coated with the graft copolymers were very high (ca. 105–120°). The coated film has good antistatic electric property, which agreed with PEG content. The best condition of coating is a one‐cycle coating of 1% (w/v) graft copolymer solution. The coated surface had water‐repellency and antistatic electric property at the same time. The graft copolymer consisted of a PEG macromonomer; St was successfully coated onto PET surfaces, and the desirable properties of both of PEG macromonomer and PSt were exhibited as a novel function of the coated PE film. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1524–1530, 1999     

对苯二甲酸/己二酸/丁二醇共聚酯的合成与表征

采用熔融缩聚法,以对苯二甲酸(PTA),1,6-己二酸(AA),1,4-丁二醇(BDO)为原料,制备了不同原料物质的量之比的对苯二甲酸/己二酸/丁二醇共聚酯(PBAT),通过傅立叶变换红外光谱(FTIR)和核磁共振氢谱(1H–NMR)测试验证了PBAT的结构和物质的量之比,利用差示扫描量热(DSC)法和热重(TG)分析对PBAT进行了热性能测试,采用X射线衍射(XRD)表征了PBAT共聚酯的结晶性能,用电子单纤强力仪测试了PBAT共聚酯纤维的拉伸性能。结果表明,成功地合成了设计比例的PBAT,随着PTA含量的增加,共聚酯的熔融温度从162.78℃提高到了212.20℃,质量损失5%的分解温度由369.17℃提升到了375.94℃,共聚酯纤维的断裂强度逐渐增加,最高可达3.04 c N/dtex,共聚酯的结晶度也增加。PBAT被广泛应用于片材、地膜、包装、发泡等。     

Chemical cross-linking of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) using poly(ethylene oxide) (PEO)

Hybrid films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) were prepared with different molecular weights of poly(ethylene oxide) (PEO). The cross-linking reaction between PEO and PEDOT:PSS was performed at high temperature and confirmed by using differential scanning calorimeter (DSC), contact angle measurement, and solid-state ¹H NMR. The effect of chemical reaction on the conductivity and morphology of these hybrid films was studied by using 4-point probe and atomic force microscope (AFM), respectively. As-spun PEO/PEDOT:PSS films have lower electric conductivity due to the addition of nonconductive PEO, and exhibits no molecular weight dependence on conductivity. After chemical cross-linking reaction at high temperature, only PEDOT:PSS films with lowest molecular weight PEO additives show enhanced conductivity with increasing reaction time. AFM result indicates that the heat-treated PEO/PEDOT:PSS hybrid films show grain-like morphology compared to ethylene glycol treated PEDOT:PSS films which shows continuous PEDOT domain. In the present work we demonstrate that the cross-linking reaction can be used to improve the wet stability of PEDOT:PSS nanofiber, showing good water resistance and excellent dimensional stability.     

Semiconductor–Metal Transition in Poly(3,4‐Ethylenedioxythiophene): Poly(Styrenesulfonate) and its Electrical Conductivity While Being Stretched

Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film was prepared from an aqueous dispersion of the polymer treated with 5 wt% dimethylsulfoxide (DMSO) on a glass substrate and was electronically characterized in order to study its electronic properties. The electrical resistance of the polymer film was measured over the temperature range (380–10 K) using four‐point probe technique. It was noticed that the electrical resistance followed three different trends each of which was indicative of a different charge carrier transport mechanism. Each mechanism was investigated in more detail. A semiconductor to metal transition was also observed at 292 K above which dR/dT had a positive slope. Furthermore, Hall effect, electrical conductivity and sheet resistance measurements were performed on the polymer film using van der Pauw technique. The metallic behavior of PEDOT:PSS at room temperature was further evidenced by the results of these measurements. Next, stretchable knitted fabric was coated with PEDOT:PSS prepared from the polymer dispersion treated with 5 wt% DMSO. The conductive fabric was then stretched axially to different amounts of strain and was electrically characterized in both relaxed and stretched states. Despite the constant decrease in its electrical conductivity, the fabric remained electrically conductive while being stretched under increasing applied strain. POLYM. ENG. SCI., 59:1051–1056, 2019. © 2019 Society of Plastics Engineers     

Synthesis and characterization of poly(L‐lactide)‐poly(ethylene glycol) multiblock copolymers

Poly(L‐lactide)‐poly(ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. The reaction was carried out under mild conditions, using dicyclohexylcarbodiimide as the coupling agent and dimethylaminopyridine as the catalyst. The resulting copolymers were characterized by various analytical techniques, such as GPC, viscometry, ¹H‐NMR, FTIR, DSC, X‐ray diffractometry, and contact angle measurement. The results indicated that these copolymers presented outstanding properties pertinent to biomedical use, including better miscibility between the two components, low crystallinity, and hydrophilicity. Moreover, the properties of the copolymers can be modulated by adjusting the block length of the two components or the reaction conditions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1729–1736, 2002; DOI 10.1002/app.10580