New family of zero-current-switching PWM converters using a new zero-current-switching PWM auxiliary circuit

A new family of zero-current-switching (ZCS) pulsewidth-modulation (PWM) converters using a new ZCS-PWM auxiliary circuit is presented in this paper. The main switch and auxiliary switch operate at ZCS turn-on and turn-off, and the all-passive semiconductor devices in the ZCS-PWM converters operate at zero-voltage-switching (ZVS) turn-on and turn-off. Besides operating at constant frequency and reducing commutation losses, these new converters have no additional current stress and conduction loss in the main switch in comparison to the hard-switching converter counterpart. The PWM switch model and state-space averaging approach is used to estimate and examine the steady-state and dynamic character of the system. The new family of ZCS-PWM converters is suitable for high-power applications using insulated gate bipolar transistors (IGBTs). The principle of operation, theoretical analysis, and experimental results of the new ZCS-PWM boost converter, rated 1.6 kW and operating at 30 kHz, are provided in this paper to verify the performance of this new family of converters.     

A New Family of Zero-Current-Switching (ZCS) PWM Converters

A new family of zero-current-switching (ZCS) pulsewidth-modulated (PWM) converters which uses a new ZCS-PWM switch cell is presented in this paper. The main switch and auxiliary switch operate at ZCS turn-on and turn-off, and all the passive semiconductor devices in the ZCS-PWM converter operate at zero-voltage-switching (ZVS) turn-on and turn-off. Besides operating at constant frequency and with reduced commutation losses, these new converters have no additional current stress in comparison to the hard-switching converter counterpart. The new family of ZCS-PWM converters is suitable for high-power applications using insulated gate bipolar transistors (IGBTs). The PWM switch model and state-space averaging approach is used to estimate and examine the steady-state and dynamic character of the system. The principle of operation, theoretical analysis, and experimental results of the new ZCS-PWM boost converter, rated 1 kW and operating at 30 kHz, are provided in this paper to verify the performance of this new family of converters.     

A novel zero-Voltage-switching PWM boost rectifier with high power factor and low conduction losses

This paper proposes a new single-phase high-power-factor rectifier, which features regulation by conventional pulsewidth modulation (PWM), soft commutation, and instantaneous average line current control. A new zero-voltage-switching PWM (ZVS-PWM) auxiliary circuit is configured in the presented ZVS-PWM rectifier to perform ZVS in the main switches and the passive switches, and zero-current switching in the auxiliary switch. Furthermore, soft commutation of the main switch is achieved without additional current stress by the presented ZVS-PWM auxiliary circuit. A significant reduction in the conduction losses is achieved, since the circulating current for the soft switching flows only through the auxiliary circuit and a minimum number of switching devices are involved in the circulating current path, and the proposed rectifier uses a single converter instead of the conventional configuration composed of a four-diode front-end rectifier followed by a boost converter. Nine transition states for describing the behavior of the ZVS-PWM rectifier in one switching period are described. A prototype rated at 1 kW, operating 80 kHz, with an input ac voltage of 220 V/sub rms/ and an output voltage of 400 V/sub dc/ has been implemented in the laboratory. An efficiency of 96.7% and power factor over 0.99 has been measured. Analysis, design, and the control circuitry are also presented in this paper.     

A true ZCZVT commutation cell for PWM converters

This paper introduces a true zero-current and zero-voltage transition (ZCZVT) commutation cell for DC-DC pulsewidth modulation (PWM) converters operating with an input voltage less than half the output voltage. It provides zero-current switching (ZCS) and zero-voltage switching (ZVS) simultaneously, at both turn on and turn off of the main switch and ZVS for the main diode. The proposed soft-switching technique is suitable for both minority and majority carrier semiconductor devices and can be implemented in several DC-DC PWM converters. The ZCZVT commutation cell is placed out of the power path, and, therefore, there are no voltage stresses on power semiconductor devices. The commutation cell consists of a few auxiliary devices, rated at low power, and it is only activated during the main switch commutations. The ZCZVT commutation cell, applied to a boost converter, has been analyzed theoretically and verified experimentally. A 1 kW boost converter operating at 40 kHz with an efficiency of 97.9% demonstrates the feasibility of the proposed commutation cell     

Novel zero-current-switching (ZCS) PWM switch cell minimizingadditional conduction loss

This paper proposes a new zero-current-switching (ZCS) pulsewidth modulation (PWM) switch cell that has no additional conduction loss of the main switch. In this cell, the main switch and the auxiliary switch turn on and turn off under zero-current condition. The diodes commutate softly and the reverse-recovery problems are alleviated. The conduction loss and the current stress of the main switch are minimized, since the resonating current for the soft switching does not flow through the main switch. Based on the proposed ZCS PWM switch cell, a new family of DC-to-DC PWM converters is derived. The new family of ZCS PWM converters is suitable for the high-power applications employing insulated gate bipolar transistors. Among the new family of DC-to-DC PWM converters, a boost converter was taken as an example and has been analyzed. Design guidelines with a design example are described and verified by experimental results from the 2.5 kW prototype boost converter operating at 40 kHz     

Novel ZVT-PWM converters with active snubbers

An active snubber cell is proposed to contrive zero-voltage-transition (ZVT) pulsewidth-modulated (ZVT-PWM) converters. Except for the auxiliary switch, all active and passive semiconductor devices in a ZVT-PWM converter operate at zero-voltage-switching (ZVS) turn on and turn off. The auxiliary switch operates at ZVS turn off and near zero current-switching (ZCS) turn on. An analytical study on a boost ZVT-PWM converter with the proposed active snubber cell is presented in detail. A 750 W 80 kHz prototype of the boost ZVT-PWM converter has been built in the laboratory to experimentally verify the analysis. Six basic ZVT-PWM converters can be easily created by attaching the proposed active snubber cells to conventional PWM converters. A detailed design procedure of the proposed active snubber cell is also presented in this paper     

Analysis and Design for a New ZVS DC–DC Converter With Active Clamping

A new zero voltage switching (ZVS) boost converter is presented in this paper. By using an auxiliary switch and a capacitor, ZVS for all switches is achieved with an auxiliary winding in one magnetic core. A small diode is added to eliminate the voltage ringing across the main rectifier diode. This clamping technique can also be utilized in other dc-dc converters, and a family of new ZVS dc-dc converter is derived. A prototype (500 W/193 kHz) is made to verify the theoretical analysis. The efficiency is higher than 94% at 90-V input at full load     

A zero-voltage-switched PWM boost converter with an energyfeedforward auxiliary circuit

A zero-voltage-switched (ZVS) pulsewidth-modulated (PWM) boost converter with an energy feedforward auxiliary circuit is proposed in this paper. The auxiliary circuit, which is a resonant circuit consisting of a switch and passive components, ensures that the converter's main switch and boost diode operate with soft switching. This converter can function with PWM control because the auxiliary resonant circuit operates for a small fraction of the switching cycle. Since the auxiliary circuit is a resonant circuit, the auxiliary switch itself has both a soft turn on and turn off, resulting in reduced switching losses and electromagnetic interference (EMI). This is unlike other proposed ZVS boost converters with auxiliary circuits where the auxiliary switch has a hard turn off. Peak switch stresses are only slightly higher than those found in a conventional PWM boost converter because part of the energy that would otherwise circulate in the auxiliary circuit and drastically increase peak switch stresses is fed to the load. In this paper, the operation of the converter is explained and analyzed, design guidelines are given, and experimental results obtained from a prototype are presented. The proposed converter is found to be about 2%-3% more efficient than the conventional PWM boost converter     

A new family of ZVS-PWM active-clamping DC-to-DC boost converters:analysis, design, and experimentation

The purpose of this paper is to introduce a new family of zero-voltage switching (ZVS) pulse-width modulation (PWM) active-clamping DC-to-DC boost power converters. This technique presents ZVS commutation without additional voltage stress and a significant increase in the circulating reactive energy throughout the power converters. So, the efficiency and the power density become advantages when compared to the hard-switching boost power converter. Thus, these power converters may become very attractive in power factor correction applications. In this paper, the complete family of boost power converters is shown, and one particular circuit, taken as an example, is analyzed, simulated and experimented. Experimental results are presented, taken from a laboratory prototype rated at 1600 W, input voltage of 300 V, output voltage of 400 V, and operating at 100 kHz. The measured efficiency at full load was 98%, and the power converter kept an efficiency up to 95% from 17% to 100% of full load, without additional voltage and current stresses     

Zero-Voltage-Transition PWM Converters With Synchronous Rectifier

In this paper, a family of zero-voltage-transition (ZVT) pulsewidth-modulated converters with synchronous rectifier (SR) is introduced. The SR decreases the conduction losses, while it increases the achieved soft switching range. In this family of converters, zero-voltage-switching (ZVS) condition is attained for the main and rectifier switches. Also, zero-current switching is achieved for the auxiliary switch. In addition, the applied ZVS technique can eliminate the reverse recovery losses of the rectifier switch body diode. The ZVT buck converter with SR is analyzed, and the presented experimental results confirm the theoretical analysis.      

A zero-voltage transition boost converter using a zero-voltage switching auxiliary circuit

A soft switching boost converter with zero-voltage transition (ZVT) main switch using zero-voltage switching (ZVS) auxiliary switches is proposed. Various operating intervals of the converter are presented and analyzed. Design considerations are discussed. A design example with experimental results obtained from a 300-W, 250-kHz, 300-V output DC-DC converter is presented. A modified gating scheme to utilize the auxiliary switch in the main power processing is discussed. A 600-W, 100-kHz, 380 V output, 90-250 V AC, power factor corrected, AC-to-DC, boost converter with the modified gating scheme is presented. Results show that the main switch maintains ZVT while auxiliary switches retain ZVS for the complete specified line and load conditions. Parasitic oscillations existing in the converters proposed in the literature are completely removed.     

A Comparative Study of Zero-Current-Transition PWM Converters

Zero-current-transition pulsewidth-modulation (ZCT-PWM) boost converters are conventional boost converters that use an active auxiliary circuit to turn off the main power switch with zero-current switching; the operation and properties of these converters are the focus of this paper. In this paper, the general operating principles behind all ZCT-PWM converters are reviewed, and the operation and properties of specific converters are discussed. The strengths and weaknesses of each converter are stated, and a new and improved ZCT-PWM boost converter is proposed and discussed. Experimental results obtained from an experimental ZCT-PWM boost converter prototype implemented with several of the auxiliary circuits discussed in this paper are presented, and the results confirm the superior performance of the proposed converter     

A new ZVT-PWM DC-DC converter

In this paper, a new active snubber cell that overcomes most of the drawbacks of the normal "zero voltage transition-pulse width modulation" (ZVT-PWM) converter is proposed to contrive a new family of ZVT-PWM converters. A converter with the proposed snubber cell can also operate at light load conditions. All of the semiconductor devices in this converter are turned on and off under exact or near zero voltage switching (ZVS) and/or zero current switching (ZCS). No additional voltage and current stresses on the main switch and main diode occur. Also, the auxiliary switch and auxiliary diodes are subjected to voltage and current values at allowable levels. Moreover, the converter has a simple structure, low cost, and ease of control. A ZVT-PWM boost converter equipped with the proposed snubber cell is analyzed in detail. The predicted operation principles and theoretical analysis of the presented converter are verified with a prototype of a 2 kW and 50 kHz PWM boost converter with insulated gate bipolar transistor (IGBT). In this study, a design procedure of the proposed active snubber cell is also presented. Additionally, at full output power in the proposed soft switching converter, the main switch loss is about 27% and the total circuit loss is about 36% of that in its counterpart hard switching converter, and so the overall efficiency, which is about 91% in the hard switching case, increases to about 97%     

A new ZVT-ZCT-PWM DC-DC converter

In this paper, a new active snubber cell is proposed to contrive a new family of pulse width modulated (PWM) converters. This snubber cell provides zero voltage transition (ZVT) turn on and zero current transition (ZCT) turn off together for the main switch of a converter. Also, the snubber cell is implemented by using only one quasi resonant circuit without an important increase in the cost and complexity of the converter. New ZVT-ZCT-PWM converter equipped with the proposed snubber cell provides most the desirable features of both ZVT and ZCT converters presented previously, and overcomes most the drawbacks of these converters. Subsequently, the new converter can operate with soft switching successfully at very wide line and load ranges and at considerably high frequencies. Moreover, all semiconductor devices operate under soft switching, the main devices do not have any additional voltage and current stresses, and the stresses on the auxiliary devices are at low levels. Also, the new converter has a simple structure, low cost and ease of control. In this study, a detailed steady state analysis of the new converter is presented, and this theoretical analysis is verified exactly by a prototype of a 1-kW and 100-kHz boost converter.     

软开关PWM变换器发展综述

软开关技术已从基本谐振变换器,准谐振变换器和谐振直流环节变换器发展到软开关ＰＷＭ变换器。软开关ＰＷＭ变换器综合了软开关技术和ＰＷＭ技术各自的优点,构成新一类目前发展和应用前景的变换器。本文系统地综述了谐振直流环变换器,零电压和零电流开关ＰＷＭ变换器,零电压转换ＰＷＭ变换器和零电流转换ＰＷＭ变换器的工作原理和特点。     

Zero-voltage-switching half-bridge DC-DC converter with modified PWM control method

Asymmetric control scheme is an approach to achieve zero-voltage switching (ZVS) for half-bridge isolated dc-dc converters. However, it is not suited for wide range of input voltage due to the uneven voltage and current components stresses. This paper presents a novel "duty-cycle-shifted pulse-width modulated" (DCS PWM) control scheme for half-bridge isolated dc-dc converters to achieve ZVS operation for one of the two switches without causing the asymmetric penalties in the asymmetric control and without adding additional components. Based on the DCS PWM control scheme, an active-clamp branch comprising an auxiliary switch and a diode is added across the isolation transformer primary winding in the half-bridge converter to achieve ZVS for the other main switch by utilizing energy stored in the transformer leakage inductance. Moreover, the auxiliary switch also operates at ZVS and zero-current switching (ZCS) conditions. Furthermore, during the off-time period, the ringing resulted from the oscillation between the transformer leakage inductance and the junction capacitance of two switches is eliminated owing to the active-clamp branch and DCS PWM control scheme. Hence, switching losses and leakage-inductance-related losses are significantly reduced, which provides the converter with the potential to operate at higher efficiencies and higher switching frequencies. The principle of operation and key features of the proposed DCS PWM control scheme and two ZVS half-bridge topologies are illustrated and experimentally verified.     

A new family of zero-voltage-transition PWM converters with dual active auxiliary circuits

A new family of active auxiliary circuits that allow the power switch in single switch, pulsewidth modulated converters to operate with zero-voltage switching is proposed in this paper. The main feature of an auxiliary circuit belonging to this family is that the auxiliary switch can operate with a zero-current switching turn-on and turn-off without increasing the peak current stresses of the main switch. This is an improvement over previous proposed auxiliary circuits where either the auxiliary switch operates with a hard turn-off or the circuit itself increases the peak stresses of the main switch. In this paper, the fundamental principles behind the proposed family of active auxiliary circuits are explained. Based on these principles, an example auxiliary circuit is systematically derived and presented along with several other auxiliary circuits belonging to the new family. The operation of a boost converter operating with the example auxiliary circuit is discussed in detail, and general guidelines for the design and implementation of auxiliary circuits belonging to the new family are given. The feasibility of the example auxiliary circuit is confirmed by experimental results obtained from a 500-W, 100-kHz boost converter laboratory prototype.     

Soft-switching techniques in PWM converters

A number of soft-switching pulse-width-modulated (PWM) converter techniques have been proposed, aimed at combining the desirable features of both the conventional PWM and resonant converters while avoiding their respective limitations. In this paper, three classes of zero-voltage soft-switching (PWM) converters (namely the zero-voltage-switched (ZVS) quasi-square-wave converters, ZVS-PWM converters, and zero-voltage-transition PWM converters) and two classes of zero-current soft-switching PWM converters (namely, the zero-current-switched PWM converters and zero-current-transition PWM converters) are reviewed, and their merits and limitations are assessed. Experimental results of several prototype of converters are presented to illustrate each class of converter     

An improved family of ZVS-PWM active-clamping DC-to-DC converters

A new family of DC-to-DC converters featuring clamping action, PWM modulation and soft-switching (ZVS) in both active and passive switches, is proposed to overcome the limitations of clamped mode DC-to-DC converters. The new family of converters is generated and the new circuits are presented. As the resonant circuits absorb all parasitic reactances, including transistor output capacitance and diode junction capacitance, these converters are suitable for high-frequency operation. Principle of operation of the boost converter, theoretical analysis, simulation and experimental results are presented, taken from a laboratory prototype rated at 1600 W, input voltage of 300 V, output voltage of 400 V, and operating at 100 kHz. The measured efficiency at full load was 98%     

Novel zero-current-switching PWM converters

This paper presents a new family of pulsewidth-modulated (PWM) converters, featuring soft commutation of the semiconductors at zero current (ZC) in the transistors and zero voltage (ZV) in the rectifiers. Besides operating at constant frequency and with reduced commutation losses, these new converters have output characteristics similar to the hard-switching-PWM counterpart, which means that there is no circulating reactive energy that would cause large conduction losses. The new family of zero-current-switching (ZCS)-PWM converters is suitable for high-power applications using insulated gate bipolar transistors (IGBTs). The advantages of the new ZCS-PWM boost converter employing IGBTs, rated at 1.6 kW and operating at 20 kHz, are presented. This new ZCS operation can reduce the average total power dissipation in the semiconductors practically by half, when compared with the hard-switching method. This new ZCS-PWM boost converter is suitable for high-power applications using IGBTs in power-factor correction. The principle of operation, theoretical analysis, and experimental results of the new ZCS-PWM boost converter are provided in this paper to verify the performance of this new family of converters