The effects of polymer‐nanofiller interactions on the dynamical mechanical properties of PMMA/CaCO3 composites prepared by microemulsion template

We prepared novel poly(methyl methacrylate) (PMMA)/CaCO₃ nanocomposites by using reverse micelle as a template. The nanoparticles of CaCO₃ were prepared by the reverse microemulsion with functional monomer, methyl methacrylate (MMA) as oily phase, and the PMMA/CaCO₃ nanocomposite was obtained via polymerization of MMA monomer. The SEM image showed that the nanoparticles of CaCO₃ were dispersed in the polymer matrix. Dynamic mechanical analysis (DMTA) was performed to investigate the interaction between the nanoparticles and the polymer chains. In the low‐temperature ripening process, two tan δ peaks were observed in the nanocomposite, corresponding to the glass transitions of the matrix and the interface layer. In the high‐temperature ripening process, only one tan δ peak was observed, suggesting that the interface layer forms a continuous phase. The nanoparticles behave as a physical crosslinker in the interface layer. Modification of the surface of nanoparticles with polyacrylamide and poly(N,N′‐methylenedisacrylamide) in the nanocomposite did not show an appreciable effect on the interaction of nanoparticles with the matrix. Upon removal of the aqueous phase around the nanoparticles, we obtained surface‐capped nanoparticles by using an improved reverse microemulsion technique. Another PMMA/CaCO₃ nanocomposite was also obtained with these modified nanoparticles. DMTA analysis of this nanocomposite demonstrated that the aqueous phase layer around the nanoparticles does not significantly affect the interaction between the nanoparticles and the polymer chains. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2739–2749, 2004     

Synthesis of CaCO3–P(MMA–BA) nanocomposite and its application in water based alkyd emulsion coating

As part of broader effort to synthesize a new class of water-based composite, hybrid emulsion polymerization was carried out with acrylic monomers [methyl methacrylate (MMA), n-butyl acrylate (BA)]. Nanocomposite of P(MMA–BA)/nano CaCO₃ was synthesized by in situ emulsion polymerization. Water-based alkyd coating with various proportions nano CaCO₃, P(MMA–BA) and its nanocomposite was formulated. Extent of polymerization with and without nano CaCO₃ was measured using gravimetric method. Thermal properties of neat polymer, nanocomposite and coating films were evaluated by TGA and DSC, DTA analysis. Uniform dispersion of nano CaCO₃ in polymer matrix was ensured from SEM/TEM images. Incorporation of nanoparticles to hybrid polymer and nanocomposite to alkyd emulsion showed significant enhancement in mechanical and thermal properties. Dual role of nanocomposite in coating; as a partial binder and a filler to improve property profile of neat coating has been reported.     

Synthesis of CaCO3–P(MMA–BA) nanocomposite and its application in water based alkyd emulsion coating

As part of broader effort to synthesize a new class of water-based composite, hybrid emulsion polymerization was carried out with acrylic monomers [methyl methacrylate (MMA), n-butyl acrylate (BA)]. Nanocomposite of P(MMA–BA)/nano CaCO₃ was synthesized by in situ emulsion polymerization. Water-based alkyd coating with various proportions nano CaCO₃, P(MMA–BA) and its nanocomposite was formulated. Extent of polymerization with and without nano CaCO₃ was measured using gravimetric method. Thermal properties of neat polymer, nanocomposite and coating films were evaluated by TGA and DSC, DTA analysis. Uniform dispersion of nano CaCO₃ in polymer matrix was ensured from SEM/TEM images. Incorporation of nanoparticles to hybrid polymer and nanocomposite to alkyd emulsion showed significant enhancement in mechanical and thermal properties. Dual role of nanocomposite in coating; as a partial binder and a filler to improve property profile of neat coating has been reported.     

Effects of the reinforcement and toughening of acrylate resin/CaCO3 nanoparticles on rigid poly(vinyl chloride)

Novel composite particles based on nanoscale calcium carbonate (nano‐CaCO₃) as the core and polyacrylates as the shell were first synthesized by in situ encapsulating emulsion polymerization in the presence of the fresh slush pulp of calcium carbonate (CaCO₃) nanoparticles. Subsequently, these modified nanoparticles were compounded with rigid poly(vinyl chloride) (RPVC) to prepare RPVC/CaCO₃ nanocomposites. At the same time, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were investigated, and the synergistic effect of modified nanoparticles with chlorinated polyethylene (CPE) was also studied. The results showed that in the presence of nano‐CaCO₃ particles, the in situ emulsion polymerization of acrylates was carried out smoothly, and polyacrylates successfully encapsulated on the surface of nano‐CaCO₃ to prepare the modified nanoparticles, breaking down nano‐CaCO₃ particle agglomerates, improving their dispersion in the matrix, and also increasing the particle–matrix interfacial adhesion. Thus, the effects of the reinforcement and toughening of these modified nanoparticles on RPVC were very significant, and the cooperative effect of the nanoparticles with CPE occurred in the united modification system. Scanning electron microscopy analyses indicated that large‐fiber drawing and network morphologies coexisted in the system of joint modification of nanoparticles with CPE. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3940–3949, 2007     

Controlled polymerization of methylmethacrylate from fumed SiO2 nanoparticles through atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) is a promising method to synthesize well‐defined polymer/inorganic nanoparticles. However, the surface‐initiated ATRP from commercially mass produced inorganic nanoparticles has seldom been studied. In this study, the surface‐initiated ATRP of methylmethacrylate (MMA) from commercially mass produced fumed silica (SiO₂) nanoparticles was investigated. Unlike the ATRP of MMA initiated from a free initiator, the controllability of ATRP of MMA from the surface of fumed silica nanoparticles was much better using ligand 2,2'‐bipyridine (bpy) than N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA) as the initiator was immobilized on the surface of the SiO₂ nanoparticles and the presence of the SiO₂ nanoparticles made the CuCl/bpy catalyst system a homogeneous catalyst system and CuCl/PMDETA a heterogeneous one. The appropriate molar ratio of monomer and initiator was essential for preparing controlled PMMA/SiO₂ nanoparticles. The entire process of ATRP of MMA from the surface of SiO₂ nanoparticles was controllable when using bpy as ligand, xylene as solvent and with a monomer to initiator ratio of 300:1. The ¹H NMR results indicated that the PMMA on the surface of the SiO₂ was prepared via ATRP initiated from 4‐(chloromethyl)phenyltrimethoxysilane. The well‐defined PMMA/SiO₂ nanoparticles obtained have good thermal stability and are well dispersed in organic media as proved by TGA, dynamic light scattering and transmission electron microscopy. © 2013 Society of Chemical Industry     

Grafting of sulfonated monomer onto an amino‐silane functionalized 2‐aminoterephthalate metal − organic framework via surface‐initiated redox polymerization: proton‐conducting solid electrolytes

A post‐polymerization method for metal–organic frameworks (MOFs) has been developed to produce super‐acidic solid nanoparticles. Thus, the NH₂MIL‐53(Al) MOF was functionalized with (3‐aminopropyl)triethoxysilane (APTES) from amine groups to yield active site anchored MOF nanoparticles. Then, sulfonated polymer/MOF hybrid nanoparticles were prepared by redox polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (MOF‐g‐PAMPS), initiated onto the surfaces of aminopropyl‐functionalized NH₂MIL‐53(Al) nanoparticles. The synthesis and modification of NH₂MIL‐53(Al) nanoparticles were characterized by Fourier transform infrared (FTIR) spectroscopy and TGA. FTIR and TGA results indicated that APTES modifier agent and AMPS monomer were successfully grafted onto the MOF nanoparticles. The grafting efficiency of PAMPS polymer onto the MOF nanoparticles was estimated from TGA thermograms to be 33%. Also, sulfonated polymer/MOF hybrid nanoparticles showed a proton conductivity as high as 4.9 × 10^?5 S cm^?1. Nitrogen adsorption of modified NH₂MIL‐53(Al) showed also a decrease in pore volume. The morphology and crystalline structure of MOF nanoparticles before and after the modification processes were studied by SEM and XRD, respectively. © 2015 Society of Chemical Industry     

Enhanced mechanical and thermal properties of PS/mica and PMMA/mica nanocomposites by emulsion polymerization

Polymer/mica nanocomposites of styrene or methyl methacrylate have been prepared by emulsion polymerization. For the polymer/mica nanocomposites, the mica was dispersed individually in water, and we found that they were adsorbed on the surface of monomer droplets. Polymer/mica nanocomposites were obtained by adding an aqueous dispersion of layered silicate into the polymer emulsion. X‐ray diffraction (XRD) and FTIR spectra were used to characterize the structures of the nanocomposites. The degree of dispersion of these nanocomposites were investigated by using a transmission electron microscopy (TEM). Furthermore, the thermal and mechanical properties of polymer/mica nanocomposites were determined by using thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), and dynamic mechanical analysis (DMA). The increased tan δ of the obtained nanocomposites is ascribed to the fine dispersion of mica particles into the polymer matrix. POLYM. COMPOS., 2009. © 2009 Society of Plastics Engineers     

A novel route for the synthesis of poly(2‐hydroxyethyl methacrylate) grafted TiO2 nanoparticles via surface thiol‐lactam initiated radical polymerization

Hybrid nanocomposites of poly(2‐hydroxyethyl methacrylate) (PHEMA) and TiO₂ nanoparticles were synthesized via surface thiol‐lactam initiated radical polymerization by following the grafting from strategy. Initially, TiO₂ nanoparticles were modified by 3‐mercaptopropyl trimethoxysilane to prepare thiol functionalized TiO₂ nanoparticles (TiO₂? SH). Subsequently, surface initiated polymerization of 2‐hydroxyethyl methacrylate was conducted by using TiO₂? SH and butyrolactam as an initiating system. The anchoring of PHEMA onto the surface of TiO₂ nanoparticles was investigated by FTIR, ¹H‐NMR, XPS, TGA, and XRD analyses. The experimental results indicated a strong interaction between PHEMA and TiO₂ nanoparticles owing to covalent bonding. The TEM and SEM images of PHEMA‐g‐TiO₂ showed that the agglomeration propensity of TiO₂ nanoparticles was significantly reduced upon the PHEMA functionalization. The molecular weight and polydispersity index of the cleaved PHEMA from the surface of TiO₂ nanocomposites were estimated by GPC analysis. An improved thermal property of the nanocomposites was observed from TGA analysis. PHEMA‐g‐TiO₂ nanocomposites were found to be highly dispersible in organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of poly(methyl methacrylate)/silica nanocomposite through emulsion polymerization using dimethylaminoethyl methacrylate

Polymer/Silica nanocomposite latex particles were prepared by emulsion polymerization of methyl methacrylate (MMA) with dimethylaminoethyl methacrylate (DM). The reaction was performed using a nonionic surfactant and in the presence of silica nanoparticles as the seed. The polymer‐coated silica nanoparticles with polymer content and number average particle sizes ranged from 32 to 93 wt % and 114–310 nm, respectively, were obtained depending on reaction conditions. Influences of some synthetic conditions such as MMA, DM, surfactant concentration, and the nature of initiator on the coating of the silica nanoparticles were studied. Electrostatic attraction between anionic surface of silica beads and cationic amino groups of DM is the main driving force for the formation of the nanocomposites. It was demonstrated that the ratio of DM/MMA is important factor in stability of the system. The particle size, polymer content, efficiency of the coating reaction, and morphology of resulted nanocomposite particles showed a dependence on the amount of the surfactant. Zeta potential measurements confirmed that the DM was located at the surface of the nanocomposites particles. Thermogravimeteric analysis indicated a relationship between the composition of polymer shell and polymer content of the nanocomposites. The nanocomposites were also characterized by FTIR and differential scanning calorimetry techniques. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Improvement of thermal and fire properties of polypropylene

In the present research, the thermal stability and fire properties of polypropylene (PP) have been improved through direct melt intercalation of PP, organically modified montmorillonite (OMMT), calcium carbonate (CaCO₃) nanoparticles, and conventional flame retardants, i.e., decabromodiphenyl oxide (DB) and antimony trioxide (AO). The morphology of the compound was characterized by means of X‐ray diffractometry and transmission electron microscopy. Thermogravimetry analysis (TGA), cone‐calorimetry, limiting oxygen index, UL‐94, and tensile tests were also employed to investigate thermal and mechanical properties as well as the flammability of the compounds. Data, obtained from TGA, indicated that simultaneous incorporation of both OMMT and CaCO₃ nanoparticles forms a synergistic effect to improve both the thermal and thermo‐oxidative stability. The kinetic analysis of polymer degradation showed that the presence of nanoparticles hindered the thermal degradation of PP. The combination of OMMT and CaCO₃ was more effective to improve fire properties than OMMT and DB/AO. The experimental results indicated that the incorporation of OMMT and CaCO₃ improved both the tensile (i.e., the increase of yield strength, tensile strength, and Young's modulus) and thermal properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of polyacrylamide‐calcium carbonate and polyacrylamide‐calcium sulfate nanocomposites

Polyacrylamide‐calcium carbonate (PAM/CaCO₃) and polyacrylamide‐calcium sulfate (PAM/CaSO₄) nanocomposites were prepared via solution‐mixing technique. The resulting PAM‐based nanocomposites with various CaCO₃ and CaSO₄ nanoparticles contents (0–4% w/w) were investigated. Nanoparticles of CaCO₃ and CaSO₄ were synthesized by in situ deposition technique. In this technique, the surface modification of nanoparticles was performed by nonionic polymeric surfactant. The particle size of nanoparticles was recognized by X‐ray diffraction and scanning electron microscope (SEM) analysis which confirms that the particle has diameter of 25–33 nm. As prepared, nanocomposites films (thickness, 40‐μm) were characterized by Fourier transform infrared (FT‐IR), SEM, and energy‐dispersive X‐ray spectroscopy (EDS). FT‐IR shows the chemical structure of nanocomposites where as SEM analysis suggested that the nanofillers dispersed well in polymer matrix and EDS shows the elemental composition of the nanocomposite samples. Thermal properties of the nanocomposites were studied by using differential scanning calorimetric analysis. The PAM/CaCO₃ and PAM/CaSO₄ nanocomposites showed a higher glass transition temperature and a better thermal stability compared to the pure PAM. The glass transition temperature (T_g) of nanocomposites increases with increase in content of nanoparticles. It may be owing to the interaction between inorganic and organic components. POLYM. COMPOS.,, 2012. © 2012 Society of Plastics Engineers     

Preparation and properties of nano‐CaCO3/acrylonitrile‐butadiene‐styrene composites

CaCO₃/acrylonitrile‐butadiene‐styrene (ABS) and CaCO₃/ethylene‐vinyl acetate copolymer (EVA)/ABS nanocomposites were prepared by melting‐blend with a single‐screw extruder. Mechanical properties of the nanocomposites and the dispersion state of CaCO₃ particles in ABS matrix were investigated. The results showed that in CaCO₃/EVA/ABS nanocomposites, CaCO₃ nanoparticles could increase flexural modulus of the composites and maintain or increase their impact strength for a certain nano‐CaCO₃ loading range. The tensile strength of the nanocomposites, however, was appreciably decreased by adding CaCO₃ nanoparticles. The microstructure of neat ABS, CaCO₃/ABS nanocomposites, and CaCO₃/EVA/ABS nanocomposites was observed by scanning electron microscopy. It can be found that CaCO₃ nanoparticles were well‐dispersed in ABS matrix at nanoscale. The morphology of the fracture surfaces of the nanocomposites revealed that when CaCO₃/EVA/ABS nanocomposites were exposed to external force, nano‐CaCO₃ particles initiated and terminated crazing (silver streak), which can absorb more impact energy than neat ABS. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Coincorporation of nano‐silica and nano‐calcium carbonate in polypropylene

In this study, various polypropylene (PP) nanocomposites were prepared by melt blending method. The effects of different spherical nanofillers, such as 50 nm CaCO₃ and 20 nm SiO₂, on the linear viscoelastic property, crystallization behavior, morphology and mechanical property of the resulting PP nanocomposites were examined. Rheological study indicated that coincorporation of nano‐SiO₂ and nano‐CaCO₃ favored the uniform dispersion of nanoparticles in the PP matrix. Differential scanning calorimeter (DSC) and polarizing optical microscopy (POM) studies revealed that the coincorporation of SiO₂ and CaCO₃ nanoparticles could effectively improve PP crystallizability, which gave rise to a lower supercooling temperature (ΔT), a shorter crystallization half‐life (t_1/2) and a smaller spherulite size in comparison with those nanocomposites incorporating only one type of CaCO₃ or SiO₂ nanoparticles. The mechanical analysis results also showed that addition of two types of nanoparticles into PP matrix gave rise to enhanced performance than the nanocomposites containing CaCO₃ or SiO₂ individually. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of nanoparticle treatment on the crystallization behavior and mechanical properties of polypropylene/calcium carbonate nanocomposites

Effects of nanoparticle surface treatment on the crystallization behavior and mechanical properties of polypropylene (PP)/CaCO₃ nanocomposites were investigated by using differential scanning calorimetry (DSC), polarized optical microscope (POM), X‐ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results demonstrated that the interfacial interaction formed between PP and nanoparticles significantly influenced the thermal and mechanical properties of nanocomposites. It was found that CaCO₃ nanoparticles modified by a single aluminate coupling agent (CA‐1) could improve the onset crystallization temperature more effectively than that modified by a compound surface‐treating agent (CA‐2) could. However, there is no significant difference in total rate of crystallization for the two PP/CaCO₃ nanocomposites (PPC‐1 and PPC‐2), which contained CA‐1 and CA‐2, respectively. In contrast, CA‐2 modified nanoparticles could cause smaller spherulites and induce much more β‐phase crystal in nanocomposites than that of CA‐1 modified nanoparticles. This may be explained by a synergistic effect of aluminate coupling agent and stearic acid in CA‐2, which also resulted in an improved toughness for PPC‐2. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 3480–3488, 2006     

Studies on synthesis and characterization of poly(methyl methacrylate)‐bentonite clay composite by emulsion polymerization and simultaneous in situ clay incorporation

Well‐dispersed poly(methyl methacrylate) (PMMA)–bentonite clay composite was synthesized by emulsion polymerization using methyl methacrylate (MMA) monomer and 3% sodium carbonate treated bentonite clay. The composite lost its transparency normally encountered with the neat PMMA. The composite was characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), vicat softening point (VSP), dynamic mechanical thermal analysis (DMTA), and tensile studies. The morphology was investigated by scanning electron microscopy (SEM) and atomic forced microscopy (AFM) as well. The crystallography was studied to estimate the changes in crystallographic planes by X‐ray diffraction (XRD) analysis. The particle size distribution was compared amongst neat bentonite clay, neat PMMA and the composite. The FTIR spectra reveal the fact that no new primary valence bond is formed between the clay and PMMA. The thermal stability of the composite is significantly improved, as indicated by the TGA and VSP studies. A substantial increase in glass transition temperature (T_g) approximately, 10°C was recorded from the DMTA as both the storage modulus and tan δ values underwent inflexion at higher temperatures in case of the composite compared with the pristine PMMA. The XRD pattern indicates increase in basal “d” spacing for the composite. The morphology from both the SEM and AFM is quite supportive to well‐dispersed exfoliation. The incorporation of nanosized activated clay particles in PMMA during its in situ polymerization from MMA led to the formation of nanocomposites. POLYM. COMPOS., 2013. © 2012 Society of Plastics Engineers     

Effect of neodymium‐doped titanium dioxide nanoparticles on the structural,mechanical, and electrical properties of poly(butyl methacrylate) nanocomposites

Nanocomposites based on neodymium‐doped titanium dioxide (Nd‐TiO₂)/poly(n‐butyl methacrylate) (PBMA) have been prepared by an in situ polymerization of butyl methacrylate monomer with varying concentrations of Nd‐TiO₂ nanoparticles. The resulting nanocomposites have been analyzed by ultraviolet (UV)–Visible spectroscopy, Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and impedance analyzer (TGA). The results of UV and FTIR spectroscopy have indicated the interaction of nanoparticles with the PBMA matrix. Spherically shaped nanoparticles with an average size of 10–25 nm have been revealed in the TEM and their homogeneous dispersion, and interaction of polymer matrix has been confirmed by SEM and XRD studies. The thermal stability and glass transition temperature of the composites were significantly enhanced by the addition of nanoparticles. The AC conductivity and dielectric properties of nanocomposites have been found to be higher than pure PBMA, and the maximum electrical properties have been observed for 7 wt% composite. The reinforcing nature of the nanoparticles in PBMA has been reflected in the improvement in tensile strength measurements. The result indicated that the tensile strength of nanocomposites have greatly enhanced by the addition of Nd‐TiO₂ nanoparticles whereas the elongation at break decreases with the loading of nanofillers. To understand the mechanism of reinforcement, tensile strength values have been correlated with various theoretical modeling. The research has been found to be promising in the development of novel materials with enhanced tensile strength, dielectric constant, and thermal properties, which may find potential applications in energy storage and nanoelectronic devices. J. VINYL ADDIT. TECHNOL., 25:9–18, 2019. © 2018 Society of Plastics Engineers     

Investigation on preparation and property of nano‐CaCO3/PP masterbatch modified by reactive monomers

Nano‐CaCO₃/polypropylene (PP) masterbatch containing above 80 wt % nano‐CaCO₃ was prepared by nano‐CaCO₃ coated PP modified by reactive monomers. The chemical interaction, crystallization and melting behavior, thermal stability, morphology, and surface contact angle of masterbatch were investigated with IR, DSC, TEM, TGA, ESCA, and surface contact angle. The results indicated that nano‐CaCO₃ was coated by PP graft copolymers in the masterbatch modified by reactive monomers. The graft ratio and crystallization and melting behavior of PP in the masterbatch depended on the type and content of reactive monomer. The crystallization temperatures of masterbatch modified by reactive monomer is methyl methacrylate > butyl acrylate > methyl acrylate ≈ mixture of acrylic acid and styrene > unmodified ≈ maleic anhydride ≈ acrylic acid > styrene. Modification by reactive monomer increased the thermal stability and surface contact angle of masterbatch. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3907–3914, 2006     

Preparation and characterization of nano‐CaCO3 encapsulated by copolymerization of styrene and maleic anhydride

Encapsulated nanometer calcium carbonate (nano‐CaCO₃) was prepared using styrene and maleic anhydride (MAH) copolymer in 2‐propanol or methanol–water mixture in the presence of different initiator systems. The particle morphology and physical properties of the encapsulated nano‐CaCO₃ particles, such as the interaction between the encapsulating polymer and the nano‐CaCO₃, and the thermal stability of encapsulated nano‐CaCO₃ were studied by Fourier‐transform infrared spectroscopy (FTIR), Soxhlet extraction experiments, thermogravimetric analysis banded with FTIR (TGA‐FTIR) and transmission electron microscopy (TEM). The encapsulating ratio and the stable encapsulating ratio of encapsulated nano‐CaCO₃ were characterized. The results showed that a strong interfacial interaction was obtained due to the formation of a chemical bond or ion‐dipole between the C?O group of MAH and Ca²⁺ ion of nano‐CaCO₃. The encapsulating ratio and stable encapsulating ratio of nano‐CaCO₃ initiated by AIBN was higher than that initiated by BPO. Addition of maleic anhydride increased the encapsulating ratio and the stable encapsulating ratio of encapsulated nano‐CaCO₃. For the encapsulated nano‐CaCO₃ prepared in methanol–water, the diameter of the encapsulated nano‐CaCO₃ particle increased from 60–70 nm to about 100 nm and the morphology changed from a cube with a sharp edge to spherical with a rough surface. Copyright © 2006 Society of Chemical Industry     

Facile fabrication of nanocomposite microspheres with polymer cores and magnetic shells by Pickering suspension polymerization

Pickering suspension polymerization was used to prepare magnetic polymer microspheres that have polymer cores enveloped by shells of magnetic nanoparticles. Styrene was emulsified in an aqueous dispersion of Fe₃O₄ nanoparticles using a high shear. The resultant Pickering oil-in-water (o/w) emulsion stabilized solely by magnetic nanoparticles was easily polymerized at 70 °C without stirring. Fe₃O₄ nanoparticles act as effective stabilizers during polymerization and as building blocks for creating the organic–inorganic hybrid nanocomposite after polymerization. The fabricated magnetic nanocomposites were characterized by FTIR, XRD, TGA, DSC, GPC, XPS and SEM. The structures of the polymer core and the nanoparticle shell were analyzed. We investigated the effects on the products of the weight of Fe₃O₄ nanoparticles used to stabilize the original Pickering emulsions. Pickering suspension polymerization provides a new route for the synthesis of a variety of hybrid nanocomposite microspheres with supracolloidal structures.     

Synthesis,characterisation and flame,thermal and electrical properties of poly (<Emphasis Type="Italic">n</Emphasis>-butyl methacrylate)/titanium dioxide nanocomposites

Nanocomposites based on poly (n-butyl methacrylate) (PBMA) with various concentrations of titanium dioxide (TiO₂) nanoparticles were synthesised by in situ free radical polymerisation method. The formation of nanocomposite was characterised by FTIR, UV, XRD, DSC, TGA, impedance analyser and flame retardancy measurements. FTIR and UV spectrum ascertained the intermolecular interaction between nanoparticles and the polymer chain. The XRD studies indicated that the amorphous region of PBMA decreased with the increase in content of metal oxide nanoparticles. The SEM revealed the uniform dispersion of nanoparticles in the polymer composite. The DSC and TGA studies showed that the glass transition temperature and thermal stability of the nanocomposites were increased with the increase in the concentration of nanoparticles. The conductivity and dielectric properties of nanocomposites were higher than pure PBMA and the maximum electrical property was observed for the sample with 7 wt% TiO₂. As the concentration of nanoparticles increased above 7 wt%, the electrical property of nanocomposite was decreased owing to the agglomeration of nanoparticles in the polymer. Nanoparticles could impart better flame retardancy to PBMA/TiO₂ composite and the flame resistance of the materials improved with the addition of nanoparticles in the polymer matrix.