Improving performance in the OpMiGua hybrid network employing the network layer packet redundancy scheme

The optical migration-capable network with service guarantees hybrid network is a time-divided packet/circuit hybrid network offering absolute performance guarantees and high resource utilisation. Guaranteed service traffic (GST) follows lightpaths receiving absolute priority over statistically multiplexed (SM) traffic. Transmission resources are fully shared by interleaving SM and GST packets, but packet-switched SM packets experience contention, resulting in a packet loss that should be minimised. This article explores a novel bufferless network approach where the performance of the SM class is satisfied by applying packet-level forward error correction (FEC). Two implementation strategies are proposed: RedSM transmitting redundancy packets as SM traffic and RedGST transmitting redundancy packets as low-priority GST traffic. The performance of the schemes is explored analytically and by simulation. For uniform traffic loads, the RedGST scheme shows the best performance of the two, but even at 60% load the RedSM scheme shows packet loss rates (PLRs)close to 1025. Simulations with non-uniform traffic loads illustrate the importance of selecting the optimal redundancy ratio; the failure to do so results in up to two orders of magnitude increase in PLR for the RedGST scheme. A much higher tolerance for traffic variations is the main benefit for the RedSM scheme. In view of the results, both schemes are attractive alternatives to buffered contention resolution techniques.     

QoS Model of a Router with Feedback Control

The Internet has evolved into a shared, integrated platform of a broad range of applications with different Quality‐of‐Service (QoS) requirements. Routers are an important part of the Internet and play a critical role in assuring QoS. A router is usually placed between two networks to receive data packets from one network and then transmit those data packets to another network if necessary. Data packets are the actual units of data traveling on computer networks. A data packet has two parts: header and data. The data carries messages, such as e‐mail text, from computer applications. The header carries information that is required to control and manage the transmission of the data packet on computer networks. Existing approaches for providing QoS involve prediction or estimation for traffic characterization to determine parameters required of static traffic admission control. However, prediction or estimation inaccuracy in traffic characterization can result in inappropriate parameter settings for static admission control and, in turn, compromise QoS or resource utilization. This study presents a QoS model of a router with feedback control that monitors the state of resource usage and adaptively adjusts parameters of traffic admission control to overcome prediction or estimation inaccuracy and achieve a balance between QoS and resource utilization. The QoS model of a router with feedback control is simulated to test its performance on QoS and resource utilization in both heavy and light traffic conditions. The performance of the QoS model of a router with feedback control is also compared with that of two basic QoS models of a router with static admission control using admission control parameters resulting from over‐ and under‐characterization of traffic, respectively. The simulation results show that the QoS model of a router with feedback control achieves a better balance between QoS and resource utilization than the basic QoS models with over‐ and under‐characterizations of traffic in the heavy traffic condition. This study also shows that the three models of routers demonstrate similar QoS performances and resource utilization in the light traffic condition. Copyright © 2005 John Wiley & Sons, Ltd.     

All-optical 100-Gbit/s word packet time-division-multiplexed access node in a looped-back configuration: enabling technologies for sequential add-drop functionality

We experimentally demonstrate the adding, dropping, and passing through of 100-Gbit/s word packets in a looped-back all-optical time-division-multiplexed (TDM) access node. Packets are routed with a 17-dB contrast ratio and demultiplexed with a 20-dB contrast ratio. This node uses short 100-Gbit/s words to demonstrate its potential to process data packets from multiple sources and to perform packet switching in a multinode ring network configuration. The ability to tolerate timing jitter as well as varying input signal characteristics is essential to an all-optical access node in a multinode network. For 2-ps input pulses, the header processor has a timing window of ~5 ps, and the demultiplexer has a timing window of ~5.5 ps. This allows for tolerance to bit-to-bit timing jitters or to an increase in the pulse width of as much as 3 ps. Packet-to-packet timing jitter is detected and compensated by the technique used to synchronize the local source to each packet. The key enabling technologies of an all-optical TDM packet add-drop multiplexer are discussed, including an erbium-doped fiber laser, a nonlinear optical loop mirror logic gate, self-synchronization to incoming packets with a fast-saturation/slow-recovery gain element followed by an intensity discriminator, a two-wavelength nonlinear optical loop mirror demultiplexer, and synchronization of new packets to the network packet rate with a phase-locked loop. The local source is automatically synchronized to the incoming packet, because it uses an extracted pulse from the packet, which has a contrast ratio of >20 dB to the rest of the packet. Finally, new packets are added by use of a local laser and a synchronization method, which gives a timing jitter of ~1 ps. Using a statistical method of measuring Q value with picosecond resolution, we show that a header processor with two cascaded logic gates has a Q value of 7.1 with a 95% confidence level.     

Packet contention resolution in slotted optical packet switch using ant-colony based algorithm

An ant-based contention resolution scheme for the slotted optical packet switched networks has been proposed, and the optimal number of fibre delay lines (FDLs) used in the switch under various traffic loads is investigated. The proposed algorithm can makes FDLs and output port assignment so as to improve the cell-loss rate under various traffic loads. It is found for traffic loads 0.9, 0.6, 0.3, the optimum value for FDL is 64 128 and 128.     

Delivery of pre‐stored videos for mobile clients with insufficient playback buffer and bounded delay guarantee

Abstract

A deterministic service model assisted by a sufficiently large playback buffer space can provide bounded delay guarantees for video packets and simplify network resource management. However, many popular mobile terminals do not have sufficient memory capacity for deterministic video services since the embedded memory is limited and needs to be shared by numerous software programs and masses of personal data. This paper improves the traditional deterministic modeling approach for delivering pre‐stored videos to mobile clients with QoS guarantees. The limitation of playback buffer space, the network delay jitter, the processing load of resource management, and the QoS guarantee are considered in the proposed mechanism. Some traffic smoothing operations are integrated into the proposed mechanism for reducing the playback buffer demand and data rate variation. This paper further proposes a smart video frame skip algorithm, originating at the sender for preventing possible overflow problems due to insufficient playback buffer space. The algorithm can determine the most suitable temporal range for skipping frames and prevent arbitrary discarding from inappropriate video frames such as I‐frames on the client side. Simulation results reveal that the proposed mechanism can effectively remedy situations of insufficient playback buffer space while still maintaining the advantages of deterministic services.     

A comparative QoS survey of mobile ad hoc network routing protocols

A mobile ad hoc network (MANET) is a wireless, dynamic, infrastructure-less, self-organized, multi-hop, and decentralized network. Each node in MANET can act as a router as well as a work station. Many routing protocols have been developed to increase the efficiency of MANET. The primary objective of this paper is a detailed QoS comparison of reactive (AODV), proactive (DSDV), and hybrid (ZRP) routing protocols of MANET in order to find which routing protocol works best in a particular network scenario. The analysis was made for TCP-based traffic patterns. The performance differentials were analyzed on the basis of normalized routing overhead, packet loss, packet delivery ratio, control packets, end-to-end delay, packet received, and packet sent with a variation of nodes density and mobility. The results were obtained using the NS-2 simulator.     

Feed-forward linearisation technique for impulse radar ultra-wideband over fibre

The authors present the linearisation of impulse radar ultra-wideband (IR-UWB) transmission system over fibre. The radio frequency signal of IR-UWB is transmitted over 50 km of the single mode fibre (SMF) using external Mach Zehnder modulator (MZM), amplified, linearised and detected by photodetector receiver. For improving the linearity and suppressing the four-wave mixing (FWM) caused by semiconductor optical amplifier (SOA) and 50 km SMF, the system uses feed-forward technique. Link performance was evaluated for two IR-UWB signals to suppress the FWM. The theoretical simulation results demonstrate a distortion cancellation that is produced by SOA of better than 25 dB over 1550 nm single mode optical fibre cable. In addition, the characteristic transmission of UWB pulse radio through 50 km single mode radio over fibre (RoF) system, such as BER measurements to evaluate the performance of the UWB with respect to different laser power output level, is investigated. This technique has been used to successfully transmit indirectly modulated data using laser diode at 10 GB/s light-wave transmission system.     

Emergency Prioritized and Congestion Handling Protocol for Medical Internet of Things

Medical Internet of Things (MIoTs) is a collection of small and energyefficient wireless sensor devices that monitor the patient’s body. The healthcare networks transmit continuous data monitoring for the patients to survive them independently. There are many improvements in MIoTs, but still, there are critical issues that might affect the Quality of Service (QoS) of a network. Congestion handling is one of the critical factors that directly affect the QoS of the network. The congestion in MIoT can cause more energy consumption, delay, and important data loss. If a patient has an emergency, then the life-critical signals must transmit with minimum latency. During emergencies, the MIoTs have to monitor the patients continuously and transmit data (e.g., ECG, BP, heart rate, etc.) with minimum delay. Therefore, there is an efficient technique required that can transmit emergency data of high-risk patients to the medical staff on time with maximum reliability. The main objective of this research is to monitor and transmit the patient’s real-time data efficiently and to prioritize the emergency data. In this paper, Emergency Prioritized and Congestion Handling Protocol for Medical IoTs (EPCP_MIoT) is proposed that efficiently monitors the patients and overcome the congestion by enabling different monitoring modes. Whereas the emergency data transmissions are prioritized and transmit at SIFS time. The proposed technique is implemented and compared with the previous technique, the comparison results show that the proposed technique outperforms the previous techniques in terms of network throughput, end to end delay, energy consumption, and packet loss ratio.     

一种改进的空分交换型OPS节点结构及其性能分析

提出了一种改进的空分交换型光分组交换(OPS)节点结构--共享反馈和输出缓存(SFOB)结构.该结构不但结合了基本的OPS节点结构的优势(将反馈缓存与共享缓存组合配置),而且在缓存使用方面改进了每根光纤延迟线(FDL)独立使用的做法,增加了将反馈缓存和共享缓存中两根FDL串联使用的机制,并据此设计了相应的缓存调度算法.最后使用计算机仿真的方法对该结构在随机网络负载下的丢包率性能进行了研究.仿真结果表明在相同缓存容量条件下该结构比传统的共享存储光分组(SMOP)交换结构具有更好的交换性能.     

A cross-layer adaptive algorithm for multimedia QoS fairness in WLAN environments using neural networks

The authors address the problem of providing fair multimedia quality-of-service (QoS) in IEEE 802.11 distributed co-ordination function-based wireless local area networks in the infrastructure mode where mobile hosts experience heterogeneous channel conditions due to mobility and fading effects. It was observed that unequal link qualities can pose significant unfairness of channel sharing, which may thereby lead to the degradation of multimedia QoS performed in adverse conditions. A cross-layer adaptation scheme that provides fair QoS by online adjusting the multidimensional medium access control layer backoff parameters in accordance with the application-layer QoS requirements as well as the physical-layer channel conditions was proposed. The solution is based on an optimisation approach, which utilises neural networks to learn the cross-layer function. Simulation results demonstrate that the proposed adaptation scheme can tackle heterogeneous channel conditions and random joining (or leaving) of hosts to achieve fair QoS in terms of throughput and packet delay.     

Combined methodology for measurement of available bandwidth and link capacity in wired packet networks

Accurate measurement of network parameters such as available bandwidth (ABW), link capacity, delay, packet loss and jitter are used to support and monitor several network functions, for example traffic engineering, quality-of-service (QoS) routing, end-to-end transport performance optimisation and link capacity planning. However, proactive network measurement schemes can impact both the data traffic and the measurement process itself, affecting the accuracy of the estimation if a significant amount of probe traffic is injected into the network. In this work, the authors propose two measurement schemes, one for measuring ABW and the other for measuring link capacity, both of them use a combination of data probe packets and Internet control messaging protocol (ICMP) packets. Our schemes perform ABW and link-capacity measurements in a short time and with a small amount of probe traffic. The authors show a performance study of our measurement schemes and compare their accuracy to those of other existing measurement schemes and also show that the proposed schemes achieve shorter convergence time than other existing schemes and high accuracy.     

Passive mode-locking in erbium-doped fibre laser based on BN-GO saturable absorber

A C-band mode-locked fibre laser incorporating a boron nitride-doped graphene oxide (BN-GO)-based saturable absorber (SA) is proposed and demonstrated. The SA is fabricated by depositing multiple layers of synthesized BN-GO nanoparticles onto the polished surface of a side-polished fibre, which is then inserted into an erbium-doped fibre laser cavity to generate the desired pulsed output. The strong nonlinear optical response and light absorption of the BN-GO nanoparticles induces the generation of a highly stable mode-locked pulse at 1567.32?nm with visible Kelly’s sidebands. The pulses have a measured repetition rate of 13.56?MHz and a pulse width of 1.18?ps at the maximum pump power of 280.5?mW. The pulses have a frequency signal-to-noise ratio of ～53?dB, indicating a highly stable output. The proposed laser would find significant telecommunications applications, particularly for dense wavelength division multiplexing systems.     

Packet-loss-robust load-balancing switch with distributed extended cross-point queues

A packet switch architecture and a method for load-balancing are described, which involve no centralised schedulers. The method is implemented by distributing extended cross-point queues (a threedimensional structure) over all elements of the switch and deploying pollers to append packets and to select the queues to be served, together with simple local work-conserving schedulers. The queue structure is such that it renders the proof that no packet will be mis-sequenced trivial. The architecture is practical and shows enhanced performance compared with other state-of-the-art load-balancing architectures, not only for the average delay but also for the distribution of individual delays, the latter being measured by a custom tool that compares the performance of the architecture to the ideal operation of an output queued switch. The queue structure permits the fair penalisation of only the offending input?output flows within the switch in the case of buffer overflow. The basic scheme is enhanced to avoid improper operation in the presence of packet drops, a problem that reintroduces mis-sequencing and that has not been properly addressed in the class of architectures that use pollers to distribute packets.     

高性能安全路由器BW7000的设计与实现

高性能和安全是计算机网络研究的两个主要问题。路由器在保证转发性能的前提下提供网络安全保护已经成为当前的研究热点。文章介绍了在完成国家"八六三"计划重大课题"高性能安全路由器"的过程中解决的若干关键技术问题。高性能安全路由器BW7000基于自主设计的高性能路由器操作系统HEROS。为保证高性能的路由转发,设计实现了基于RAM的高性能路由查找算法;为支持服务质量控制和安全管理,设计实现了基于无冲突HashTrie树的分组分类算法和基于反馈的分布式分组调度算法;为保证网络安全,提出了基于分布式密钥管理的路由器安     

Flooding-limited for multi-constrained quality-of-service routing protocol in mobile ad hoc networks

Multi-constrained quality-of-service (QoS) routing is used to find routes in a network to satisfy multiple independent QoS constraints. This problem is considered to be NP-complete, and most existing QoS routing algorithms are based on maintaining a global network state at every node. A multi-constrained, flooding-limited, QoS routing method to deal with limited available resources and minimum computation in a dynamic environment is proposed. The solution is based on decomposition of a routing area and a restriction in the exchange of routing information. It reduces the size of the control messages, restricts the amount of routing information, minimises the overhead from the flooding of control traffic and decreases the complexity of path selection. It is also proved that the flooding-limited-path heuristic can achieve very high performance by maintaining entries in each node, which indicates that the performance of the limited-path heuristic is not sensitive to the number of constraints. Simulation results show that this protocol provides better performance than other protocols, especially with regards to end-to-end delay, throughput and packet loss.     

基于空间拓展法的管道高阶螺旋导波波包追踪方法研究

螺旋导波是管道短距离高精度层析成像技术采用的主要导波模态,可以有效地提高成像分辨率,弥补目前管道导波长距离大范围检测精度低的缺点,在管道腐蚀检测中具有重要意义。然而由于导波的频散及螺旋导波的多路径传播特性,换能器接收到的检测信号波包众多,且经常发生重叠。为了便于分析这些波包的来源,需要有效的方法来计算各阶螺旋传播路径的长度及波包到达时间,进行波包追踪。推导了基于空间拓展法的管道高阶螺旋导波传播路径的计算模型,并针对各向均匀辐射的柱面波前兰姆波形成的管道螺旋导波,进行了数值计算和实验验证,证明了模型的正确性及其在波包追踪中的有效性。对利用管道螺旋导波进行检测及层析成像具有理论指导作用。     

The designs of a scalable optical packet switching architecture

Abstract

This paper proposes a new switching architecture to be used in all optical packet switching networks. The proposed switch is derived from an original 2 × ?2 two‐stage multi‐buffer switched delay line based optical switching node, known as an M‐Quadro node. By incorporating bypass lines into the M‐Quadro architecture and employing a novel switch control strategy, the optical packet switching node can effectively resolve packet contentions, thus reducing the packet deflection probability substantially. Furthermore, we show that such architecture is scalable for a generic multiple stages optical packet switch with a larger number of input/output ports.     

Time-domain intermodal interference including higherorder dispersion effects

Abstract

The intermodal interference is analysed theoretically at the output of both a few-mode optical fibre alone and a tandem configuration of a Michelson interferometer with an optical fibre when higher-order intermodal dispersion effects are taken into account. It is revealed theoretically that in a special case of a two-mode optical fibre with a quadratic spectral dependence of the difference of propagation constants, which includes the equalization frequency with zero intermodal group delay, and fibre excitation by a broad-band light source, the time-domain visibility functions differ substantially from those corresponding to fibre excitation by a low-coherence light source. Moreover, measuring a two-mode optical fibre using time-domain and spectral-domain white-light interferometric techniques, some theoretical results are confirmed experimentally.     

Serialised batch scheduling algorithm for optical burst switching networks

A new scheduling algorithm called serialised batch scheduling (SBS) for optical burst switching (OBS) networks is proposed. SBS aggregates and serialises bursts along a shared path into one composite burst, which is switched as one unit. There are two major processes in SBS, namely, batching and serialising. While the batching process chooses a set of bursts to form the composite burst, the serialising process determines how to organise the OBS bursts within the composite burst and generates a corresponding control packet for this burst. Several SBS batching and serialising schemes are introduced and analysed here. The study by the authors shows that the guard band and burst overlap can be reduced in the SBS and, thus, the packet loss rate and the number of switch reconfigurations can be significantly reduced. In addition, it is indicated that the proposed SBS algorithm can be coupled with other OBS scheduling algorithms and reduce the requirements for a high-speed optical switch in OBS networks.     

Application-controlled handover for heterogeneous multiple radios over fibre networks

The wired-wireless integration network can be categorised as fixed mobile convergence (FMC). FMC means the convergence of the existing wired network and wireless network. Therefore a mobile device needs the function of connection and control to the FMC infrastructure. An application-controlled handover is developed, which keeps channel continuity in the wired-wireless synergy network environment that consists of 3G (UMTS) t WLAN t WPAN (UWB) and optical fibre network. A handover mechanism transmits and receives data by using the proposed application selection criteria. It maintains the channel and the seamless transmission from mobile device to the remote optical fibre network, to provide real-time service continuity for multimedia traffic. The results show that application-controlled handover has a reduction up to 83% in packet drop, 74% reduction in bit error rate, 85% reduction in power consumption and 100% enhancement in application response time (delay) as compared with the network without handover technique.