Total oxidation catalysts based on manganese or copper oxides and platinum or palladium I: Characterisation

Temperature-programmed reduction (TPR), oxidation (TPO), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) were used to characterise catalysts based on manganese oxides, copper oxides or one of them mixed with platinum or palladium-supported on γ-alumina. The catalysts were characterised before and after they had been exposed either to high temperature in the presence of steam or to sulphur dioxide. Raman spectroscopy, XRD, XPS and TPR performed on the fresh samples of MnO_x, mixed MnO_x–Pt and MnO_x–Pd revealed the presence of a mixture of manganese oxides, particularly Mn₂O₃. In the fresh mixed MnO_x–Pd and CuO_x–Pd samples, Pd catalysed the reduction of both MnO_x and CuO_x, whereas Pt only catalysed the reduction of MnO_x. After hydrothermal treatment at 900°C of the MnO_x, mixed MnO_x–Pt and MnO_x–Pd samples, there was a formation of new manganese oxide phase, Mn₃O₄ detected by Raman spectroscopy. TPR revealed increasing interaction between the metal oxides and the noble metals in the hydrothermally treated mixed MnO_x–Pd and CuO_x–Pd samples, and also the appearance of interaction in the treated mixed CuO_x–Pt sample. The sulphur adsorbed in all the MnO_x samples formed sulphate, which was more difficult to reduce than the oxides. Also, the reduction temperature of sulphates was lowered when noble metals are present.     

Pt/MnOx–CeO2 catalysts for the complete oxidation of formaldehyde at ambient temperature

MnO_x–CeO₂ mixed oxides with a Mn/(Mn + Ce) molar ratios of 0–1 were prepared by a modified coprecipitation method and investigated for the complete oxidation of formaldehyde. The MnO_x–CeO₂ with Mn/(Mn + Ce) molar ratio of 0.5 exhibited the highest catalytic activity among the MnO_x–CeO₂ mixed oxides. Structure analysis by X-ray powder diffraction and temperature-programmed reduction of hydrogen revealed that the formation of MnO_x–CeO₂ solid solution greatly improved the low-temperature reducibility, resulting in a higher catalytic activity for the oxidation of formaldehyde. Promoting effect of Pt on the MnO_x–CeO₂ mixed oxide indicated that both the Pt precursors and the reduction temperature greatly affected the catalytic performance. Pt/MnO_x–CeO₂ catalyst prepared from chlorine-free precursor showed extremely high activity and stability after pretreatment with hydrogen at 473 K. 100% conversion of formaldehyde was achieved at ambient temperature and no deactivation was observed for 120 h time-on-stream. The promoting effect of Pt was ascribed to enhance the effective activation of oxygen molecule on the MnO_x–CeO₂ support.     

Thermal stability of metal-supported catalysts for reduction of cold-start emissions in a wood-fired domestic boiler

The aim of the present work is to develop a catalyst based on a mixture of manganese oxides and platinum supported on a metallic monolith for abatement of emissions from wood combustion, particularly during the cold-start phase. The activity and the thermal stability of the catalysts have been studied in the laboratory, before performing tests in a wood-stove. The effect of the hydrothermal treatment at 900°C on the adherence of the washcoat onto a metallic substrate was studied using scanning electronic microscope. It revealed well-adhering washcoat onto the metallic support due to the growth of the alumina whiskers during the treatment. The influence of the amount of washcoat, as well as the influence of the concentration of manganese oxides in it (Mn: 5 to 20 mol%/Al₂O₃) on the activity of fresh and hydrothermally-treated catalysts were studied. The activity tests were carried out using a mixture of carbon monoxide, naphthalene and methane in the presence of air, steam and carbon dioxide to resemble the flue gases from wood combustion. On the fresh catalysts, containing the same total amount of manganese, a high concentration of manganese oxides in the washcoat favoured the oxidation of carbon monoxide and naphthalene, whereas a lower concentration of manganese oxides in the washcoat gave higher activity for the oxidation of methane. An increased total amount of manganese oxides in the catalysts, which had the same amount of washcoat, resulted in an increase in activity for the oxidation of the three combustibles. After thermal treatment at 900°C for 270 h in steam, most of the manganese oxide catalysts were activated for the oxidation of carbon monoxide and naphthalene while only being slightly deactivated for the oxidation of methane. The addition of manganese oxides in the washcoat, however, lowers the temperature of the γ- to -alumina phase transformation. Platinum (0.5 mol%) was added to the manganese oxide (10 mol%) catalyst to improve its activity. A platinum catalyst was also tested for comparison. The platinum and the mixed catalysts showed similar activity for the oxidation of carbon monoxide and naphthalene, while the mixed catalysts were more active for the oxidation of methane. A similarly mixed MnO_x–Pt (10–0.5 mol%) catalyst supported on Al₂O₃ stabilised with 3% lanthanum, but at larger scale, was tested in a wood-stove. The possibility of pre-heating the catalyst during the start-up phase was studied. The tests revealed a strong decrease of the carbon monoxide and unburned hydrocarbons emissions during the start-up phase when the catalyst was pre-heated with hot air compared with no pre-heating or no catalyst.     

Direct decomposition of nitric oxide over Ba catalysts supported on CeO2-based mixed oxides

The direct decomposition of nitric oxide (NO) over barium catalysts supported on various metal oxides was examined in the absence and presence of O₂. Among the Ba catalysts supported on single-component metal oxides, Ba/Co₃O₄ and Ba/CeO₂ showed high NO decomposition activities, while Ba/Al₂O₃, Ba/SiO₂, and Ba/TiO₂ exhibited quite low activities. The effect of an addition of second components to Co and Ce oxides was further examined, and it was found that the activities were significantly enhanced using Ce–Mn mixed oxides as support materials. XRD results indicated the formation of CeO₂–MnO_x solid solutions with the cubic fluorite structure. O₂-TPD of the CeO₂–MnO_x solid solutions showed a large desorption peak in a range of relatively low temperature. The BET surface areas of the CeO₂–MnO_x solid solutions were larger than those of pure CeO₂ and Mn₂O₃. These effects caused by the addition of Mn are responsible for the enhanced activities of the Ba catalysts supported on Ce–Mn mixed oxides.     

Preparation and characterization of LaFe1−xMgxO3/Al2O3/FeCrAl: Catalytic properties in methane combustion

MnO_x–CeO₂ mixed oxides prepared by sol–gel method, coprecipitation method and modified coprecipitation method were investigated for the complete oxidation of formaldehyde. Structure analysis by H₂-TPR and XPS revealed that there were more Mn⁴⁺ species and richer lattice oxygen on the surface of the catalyst prepared by the modified coprecipitation method than those of the catalysts prepared by sol–gel and coprecipitation methods, resulting in much higher catalytic activity toward complete oxidation of formaldehyde. The effect of calcination temperature on the structural features and catalytic behavior of the MnO_x–CeO₂ mixed oxides prepared by the modified coprecipitation was further examined, and the catalyst calcined at 773 K showed 100% formaldehyde conversion at a temperature as low as 373 K. For the samples calcined below 773 K, no any diffraction peak corresponding to manganese oxides could be detected by XRD measurement due to the formation of MnO_x–CeO₂ solid solution. While the diffraction peaks corresponding to MnO₂ phase in the samples calcined above 773 K were clearly observed, indicating the occurrence of phase segregation between MnO₂ and CeO₂. Accordingly, it was supposed that the strong interaction between MnO_x and CeO₂, which depends on the preparation route and the calcination temperature, played a crucial role in determining the catalytic activity toward the complete oxidation of formaldehyde.     

The selective catalytic reduction of nitrogen oxides by methane on noble metal-loaded sulfated zirconia

The selective catalytic reduction of NO_x by methane on noble metal-loaded sulfated zirconia (SZ) catalysts was studied. Ru, Rh, Pd, Ag, Ir, Pt, and Au-loaded sulfated zirconia catalysts were compared with the intact sulfated zirconia. For the NO–CH₄–O₂ reaction, Ru, Rh, Pd, Ir, and Pt showed promotion effect on NO_x reduction, while for the NO₂–CH₄–O₂ reaction, only Rh and Pd showed promotion effect. Over intact and Rh, Pd, Ag, and Au-loaded sulfated zirconia, NO_x conversion in NO₂–CH₄–O₂ reaction was significantly higher than that in NO–CH₄–O₂ reaction, while clear difference was not observed over Ru, Ir, and Pt-loaded sulfated zirconia. Comparison of [NO₂]/([NO]+[NO₂]) in the effluent gases in NO–O₂ and NO₂–O₂ reactions showed that Ru, Ir, and Pt has high activity for NO oxidation under the reaction conditions. These facts suggest that effects of these metals toward NO_x reduction by methane can be categorized into the following three groups: (i) low activity for NO oxidation to NO₂, and high activity for NO₂ reduction to N₂ (Pd, Rh); (ii) high activity for NO oxidation to NO₂, and low activity for NO₂ reduction to N₂ (Ru, Ir, Pt); (iii) low activity for both reactions (Ag, Au). To confirm these suggestions, combination of these metals were investigated on binary or physically-mixed catalysts. The combination of Pd or Rh with Pt or Ru gave high activity for the selective reduction of NO_x by methane.     

Catalytic combustion of hydrocarbons with Mn and Cu-doped ceria–zirconia solid solutions

The catalytic activity of a series of CeO₂–ZrO₂ mixed oxides in the total oxidation of methane and light hydrocarbons has been investigated. The influence of dopants like Mn and Cu has also been studied. It is shown that both MnO_x and CuO at low loading dissolve within the ceria–zirconia lattice. This strongly influences the redox behaviour of the catalysts by promoting low-temperature reduction of Ce⁴⁺. In addition, the ternary oxides show better stability to repeated redox cycles, which is attributed to the presence of ZrO₂. The catalytic activity of pure CeO₂ is also enhanced in the presence of ZrO₂, reaching a maximum with Ce_0.92Zr_0.08O₂; a further promotion of activity is observed with the introduction of MnO_x and CuO dissolved into CeO₂–ZrO₂ lattice.     

CO oxidation over promoted Pt catalysts

A study of CO oxidation by O₂ over Pt catalysts, promoted by MnO_x and CoO_x, is described. The activities of Pt/SiO₂, Pt/MnO_x/SiO₂ and Pt/CoO_x/SiO₂ are compared with commercial Pt/Al₂O₃, Pt/Rh/Al₂O₃ and Pt/CeO_x/Al₂O₃ catalysts. Since these catalysts differ in dispersion and weight loading of platinum, the turnover frequencies are also compared. The following order in activity in CO oxidation after a reductive pretreatment is found: Pt/CoO_x/SiO₂ > Pt/MnO_x/SiO₂, Pt/CeO_x/Al₂O₃ > Pt/Al₂O₃, Pt/Rh/Al₂O₃, Pt/SiO₂. Over Pt/CoO_x/SiO₂ CO is already oxidised at room temperature. Possible models to account for the high activity of Pt/CoO_x/SiO₂ in the CO/O₂ reaction are presented and discussed. Partially reduced metal oxides are necessary to increase the activity of the Pt/CoO_x/SiO₂, Pt/MnO_x/SiO₂ or Pt/CeO_x/Al₂O₃ catalysts. It was shown that mild ageing treatments did not affect the activity of the Pt/CoO_x/SiO₂ catalyst in CO oxidation.     

NOx storage and reduction characteristics of Pd/MnOx–CeO2 at low temperature

The reaction between hydrogen and NO was studied over 1 wt.% Pd supported on NO_x-sorbing material, MnO_x–CeO₂, at low temperatures. The result of pulse mode reactions suggest that NO_x adsorbed as nitrate and/or nitrite on MnO_x–CeO₂ was reduced by hydrogen, which was spilt-over from Pd catalyst. The NO_x storage and reduction (NSR) cycles were carried out over Pd/MnO_x–CeO₂ in a conventional flow reactor at 150 °C. In a storage step, NO was removed by the oxidative adsorption from a stream of 0.04–0.08% NO, 5–10% O₂, and He balance. This was followed by a reducing step, where a stream of 1% H₂/He was supplied to ensure the conversion of nitrate/nitrite to N₂ and thus restore the adsorbability. It was revealed that the NSR cycle is much more suitable for the H₂–deNO_x process in excess O₂, compared to a conventional steady state reaction mode.     

Catalytic combustion of methane over microemulsion-derived MnOx–Cs2O–Al2O3 nanocomposites

Mesostructured MnO_x–Cs₂O–Al₂O₃ nanocomposites have been synthesized by reverse microemulsion method combined with hydrothermal treatment and then applied to the catalytic combustion of methane. Compared to impregnation-derived conventional MnO_x/Cs₂O/Com-Al₂O₃ catalyst, the microemulsion-derived catalyst showed higher activity and stability for methane combustion. The T_10% of the fresh and of the 72 h aged Mn_xO–Cs₂O–Al₂O₃ were 475 and 490 °C, respectively, recommending it as a potential candidate catalyst for application in hybrid gas turbines. The homogeneous composition of the microemulsion-derived nanocomposite catalyst can hinder the loss of Cs⁺ and accelerate the formation of Cs–β-alumina phase, ensuring thus higher activity and stability for methane combustion.     

Catalytic oxidation of saturated hydrocarbons on multicomponent Au/Al2O3 catalysts: Effect of various promoters

The performance of unpromoted and MO_x-(M: alkali (earth), transition metal and cerium) promoted Au/Al₂O₃ catalysts have been studied for combustion of the saturated hydrocarbons methane and propane. As expected, higher temperatures are required to oxidize CH₄ (above 400 °C), compared with C₃H₈ (above 250 °C). The addition of various MO_x to Au/Al₂O₃ improves the catalytic activity in both methane and propane oxidation. For methane oxidation, the most efficient promoters to enhance the catalytic performance of Au/Al₂O₃ are FeO_x and MnO_x. For C₃H₈ oxidation a direct relationship is found between the catalytic performance and the average size of the gold particles in the presence of alkali (earth) metal oxides. The effect of the gold particle size becomes less important for additives of the type of transition metal oxides and ceria. The results suggest that the role of the alkali (earth) metal oxides is related to the stabilization of the gold nanoparticles, whereas transition metal oxide and ceria additives may be involved in oxygen activation.     

Oxides of copper, ceria promoted copper, manganese and copper manganese on Al2O3 for the combustion of CO, ethyl acetate and ethanol

Combustion of CO, ethyl acetate and ethanol was studied over CuO_x/Al₂O₃, CuO_x–CeO₂/Al₂O₃, CuMn₂O₄/Al₂O₃ and Mn₂O₃/Al₂O₃ catalysts. It was found that modification of the alumina with ceria before subsequent copper oxide deposition increases the activity for combustion of CO substantially, but the effect of ceria was small on the combustion of ethyl acetate and ethanol. The activity increases with the CuO_x loading until crystalline CuO particles are formed, which contribute little to the total active surface. The CuO_x–CeO₂/Al₂O₃ catalyst is more active than the CuMn₂O₄/Al₂O₃ catalyst for the oxidation of CO but the CuMn₂O₄/Al₂O₃ catalyst is more active for the combustion of ethyl acetate and ethanol.

Thermal ageing and water vapour in the feed caused a modest decrease in activity and did not affect the CuO_x–CeO₂/Al₂O₃ and CuMn₂O₄/Al₂O₃ catalysts differently. In addition, no difference in intermediates formed over the two catalysts was observed.

Characterisation with XRD, FT-Raman and TPR indicates that the copper oxide is present as a copper aluminate surface phase on alumina at low loading. At high loading, bulk CuO crystallites are present as well. Modification of the alumina with ceria before the copper oxide deposition gives well dispersed copper oxide species and bulk CuO crystallites associated to the ceria, in addition to the two copper oxide species on the bare alumina. The distribution of copper species depends on the ceria and copper oxide loading. The alumina supported copper manganese oxide and manganese oxide catalysts consist mainly of crystalline CuMn₂O₄ and Mn₂O₃, respectively, on Al₂O₃.     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.     

Oxidation of methane over Pd/mixed oxides for catalytic combustion

Palladium catalysts supported on mixed oxides (Pd/Al₂O₃–MO_x; M=Co, Cr, Cu, Fe, Mn, and Ni) were investigated for the low-temperature catalytic combustion of methane. Although the surface area decreased with increasing NiO in Pd/mAl₂O₃–nNiO, Pd/Al₂O₃–36NiO demonstrated an excellent activity due to the small particle size of palladium. Also, the catalytic activity strongly depended on the composition of the support. Temperature-programmed desorption of oxygen revealed that the catalytic activity in the low-temperature region depends on the adsorption state of oxygen on palladium. The activity was enhanced when the amount of adsorbed oxygen increased. In-situ XRD analysis indicated that the PdO phase was thermally stabilized on Pd/Al₂O₃–36NiO.     

Oxidative decomposition of naphthalene by supported metal catalysts

A fixed-bed reactor was utilized to investigate the activities of six metal catalysts (1% Pt, 1% Pd, 1% Ru, 5% Co, 5% Mo and 5% W on γ-Al₂O₃ support) in decomposing naphthalene, based on the production of carbon dioxide and the disappearance of naphthalene. The Pt and Pd catalysts were found to exhibit higher naphthalene oxidizing activity than other catalysts tested. The Co catalysts, whose activity is similar to that of the Ru catalysts, are promising for naphthalene oxidation. The kinetic results of naphthalene oxidation over 1% Pt/γ-Al₂O₃ catalysts are reported for the first time. A first-order reaction with respect to P_naphthalene was found, while the reaction order with respect to P_O2 decreased with increasing reaction temperatures. A Langmuir–Hinshelwood model was used to describe the observed kinetic behavior. Oxygen adsorption dominates at higher reaction temperatures (>140 °C), and consequently the oxidation of naphthalene over the Pt catalysts appeared to be insensitive to P_O2.     

Oxidation of ethanol over supported manganese catalysts—effect of the carrier

MnO_x catalysts supported on alumina, titania or yttria-stabilised zirconia were studied in ethanol oxidation. Catalysts were characterized by determining their XRD, TPR, TPD-O₂ and TPD-NH₃ properties and light-off behavior. The effect of kind of carrier on activity in the ethanol oxidation and on selectivity to acetaldehyde (ACA) was determined. Relation between the TPR properties of the catalysts and their activity in ethanol conversion is suggested. The maximum of selectivity to ACA appears in the same sequence of temperatures as the first peak of oxygen desorption from supported MnO_x catalysts.     

LaMnO3 Perovskite Supported Noble Metal Catalysts for the Total Oxidation of Methane

Two series of LaMnO₃ supported noble metal (Pt, Pd, Rh) catalysts prepared by the citrate method and calcined in air at 600 and 800 °C, respectively, were investigated. The catalysts resulting from method A were prepared by simultaneous incorporation of the noble metals during perovskite preparation and those following method B were generated by impregnation of the calcined perovskites with the noble metal compounds. The noble metals form solid solutions with the perovskite lattice. Reduction of the catalysts with hydrogen prior to the catalytic reaction led to a significant enhancement of the catalytic activity. During the catalytic reaction, the noble metal clusters are partially transformed to highly dispersed noble metal oxides or nonstoichiometric noble metal oxide phases, which are the catalytically active phases for the total oxidation of methane. The best results were obtained with the Pd containing catalysts prepared by method B.     

Multifunctional catalysts for de-NOx processes: The case of H3PW12O40·6H2O-metal supported on mixed oxides

The role of a multifunctional catalyst for de-NO_x process has been investigated. The NO_x storage capacity of H₃PW₁₂O₄₀·6H₂O (HPW) was improved by the presence of a noble metal (Pt, Rh or Pd). Both HPW and noble metal were deposited on a specific support (based on Zr–Ce or Zr–Ti). The presence of noble metal in several oxidation states, as evidenced by TPR and IR, involves the possibility of forming different catalytic sites: (i) M⁰ (zero-valent metal) and perhaps (ii) (metal–H)^δ+ from specific interactions between noble metal and the HPW proton. Supports were also able to adsorb and activate NO_x and to generate cationic catalytic sites (M^x+). These cationic sites seem to be the clue for their important activity toward NO_x reduction. This catalyst presents an outstanding resistance to SO₂ poisoning which can be related to NO and NO₂ absorption mechanism in HPW. The use of alternating short cycles of lean/rich mixtures allows us optimising the performance of this catalytic system in terms of both NO_x reduction capacity and NO_x storage efficiency: up to 48 and 84%, respectively (with a 2% CO + 1% H₂ mixture for reducing). Experimental results sustain two hypotheses: first, HPW-metal-support catalyst includes several (independent) catalytic functions required for a de-NO_x process to occur and second, the formation of oxygenate active species must be indispensable for NO_x reduction into nitrogen.     

Thermal ageing of Pt on low-surface-area CeO2–ZrO2–La2O3 mixed oxides: Effect on the OSC performance

This work aims at exploring the thermal ageing mechanism of Pt on ceria-based mixed oxides and the corresponding effect on the oxygen storage capacity (OSC) performance of the support material. Pt was supported on low-surface-area CeO₂–ZrO₂–La₂O₃ mixed oxides (CK) by impregnation method and subsequently calcined in static air at 500, 700 and 900 °C, respectively. The evolutions of textural, microstructural and redox properties of catalysts after the thermal treatments were identified by means of X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS), temperature programmed reduction (TPR) and high-resolution transmission electron microscope (HRTEM). The results reveal that, besides the sintering of Pt, encapsulation of metal by the mixed oxides occurs at the calcination temperature of 700 °C and above. The burial of Pt crystallites by support particles is proposed as a potential mechanism for the encapsulation. Further, the HRTEM images show that the distortion of the mixed oxides lattice and other crystal defects are distributed at the metal/oxides interface, probably indicating the interdiffusion/interaction between the metal and mixed oxide. In this way, encapsulation of Pt is capable to promote the formation of Ce³⁺ or oxygen vacancy on the surface and in the bulk of support. The OSC results show that the reducibility and oxygen release behavior of catalysts are related to both the metal dispersion and metal/oxides interface, and the latter seems to be more crucial for those supported on low-surface-area mixed oxides. Judging by the dynamic oxygen storage capacity (DOSC), oxygen storage capacity complete (OSCC) and oxygen releasing rate, the catalyst calcined at 700 °C shows the best OSC performance. This evident promotion of OSC performance is believed to benefit from the partial encapsulation of Pt species, which leads to the increment of Ce³⁺ or oxygen vacancies both on the surface and in the bulk of oxides despite a loss of chemisorption sites on the surface of metal particles.     

A comparative study of the water-gas shift activity of Pt catalysts supported on single (MOx) and composite (MOx/Al2O3, MOx/TiO2) metal oxide carriers

The water-gas shift (WGS) activity of platinum catalysts dispersed on a variety of single metal oxides as well as on composite MO_x/Al₂O₃ and MO_x/TiO₂ supports (M = Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Y, Zr, La, Ce, Nd, Sm, Eu, Gd, Ho, Er, Tm) has been investigated in the temperature range of 150–500 °C, using a feed composition consisting of 3% CO an 10% H₂O. For Pt catalysts supported on single metal oxides, it has been found that both the apparent activation energy of the reaction and the intrinsic rate depend strongly on the nature of the support. In particular, specific activity of Pt at 250 °C is 1–2 orders of magnitude higher when supported on “reducible” compared to “irreducible” metal oxides. For composite Pt/MO_x/Al₂O₃ and Pt/MO_x/TiO₂ catalysts, it is shown that the presence of MO_x results in a shift of the CO conversion curve toward lower reaction temperatures, compared to that obtained for Pt/Al₂O₃ or Pt/TiO₂, respectively. The specific reaction rate is in most cases higher for composite catalysts and varies in a manner which depends on the nature, loading, and primary crystallite size of dispersed MO_x. Results are explained by considering that reducibility of small oxide particles increases with decreasing crystallite size, thereby resulting in enhanced WGS activity. Therefore, evidence is provided that the metal oxide support is directly involved in the WGS reaction mechanism and determines to a significant extent the catalytic performance of supported noble metal catalysts. Results of catalytic performance tests obtained under realistic feed composition, consisting of 3% CO, 10% H₂O, 20% H₂ and 6% CO₂, showed that certain composite Pt/MO_x/Al₂O₃ and Pt/MO_x/TiO₂ catalysts are promising candidates for the development of active WGS catalysts suitable for fuel cell applications.