Analysis and comparison of the NDPs of various national annexes of Eurocode 6 / Analyse und Vergleich der NDPs verschiedener nationaler Anhänge zu Eurocode 6

In the national annexes of Eurocode 6, the individual European Member States can define values for nationally determined parameters in various places or add regulations which are not in contradiction to the current European provisions. Consequently – despite a harmonized Eurocode 6 – the normative regulations of the individual Member States differ more or less. However, in the sense of practicability of the standards in Europe, it should be the aim to develop a European standard which is as uniform as possible and which has not to be applied in significantly different ways due to the national regulations. In order to better understand the interests of the other Member States for future generations of standards and to derive potentials of harmonization, the values of the Nationally Determined Parameters (NDPs) of various Member States are compared in this paper. In this context, the extent of the deviations between the different national annexes is examined and on this basis a possible potential of harmonization is identified.     

National Standards of the People’s Republic of China – Thoughts of revision on technical specification for application of autoclaved aerated concrete / Nationale Standards der Volksrepublik China – Gedanken zur Überarbeitung der technischen Spezifikationen für die Anwendung von dampfgehärtetem Porenbeton

The revision task on technical specification for application of autoclaved aerated concrete products JGJ/T17 is under way, which was assigned in November 2013.The framework, thoughts and contents of revision on the specification are presented in this paper.     

Differentiation between the terms ”confined masonry“ and ”infill masonry“

This publication concerns the differentiation between the terms ”confined masonry“ and ”infill masonry“ using the example of the national technical approval Z‐17.1‐1145 – POROTON S9 MW –vertically perforated clay units with integrated thermal insulation using thin layer mortar [1].     

Einführung in die Grundlagen der Bruchmechanik

Introduction to Fracture Mechanics It is the purpose of this paper to familiarize the reader experienced in metallurgy with the basic principles of fracture mechanics. Starting with crystallographical fundamentals the main fracture mechanics parameters – K, G, COD, J – are derived and their physical meaning is interpreted, the range of application and the experimental techniques are also briefly described.