Eu3+‐doped glass as a color rendering index enhancer in phosphor‐in‐glass

A new method for improving color rendering index (CRI) and low correlated color temperature (CCT) in high‐power white‐light‐emitting diodes (WLEDs) is proposed. We used a configuration of phosphor‐in‐glass (PIG) and studied light output changes with the increment in concentration of yellow‐emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) phosphor. The PIG was coupled on the top of blue‐light‐emitting diodes (LED) chip (465 nm). To compensate the lack of red emission in the phosphor, Eu³⁺‐doped tellurium glass with different europium content was employed as a red emitter. The suitable contents of YAG:Ce³⁺ and Eu³⁺ were 7.5 weight percent (wt%) and 3 mol percent (mol%), respectively. The CRI value went from 72 to 82, whereas the CCT was reduced from 24 933 to 6434 K. The proposed structure can improve CCT as well as CRI of WLEDs just by placing a glass on top.     

Dy3+/Ce3+ Codoped YAG Transparent Ceramics for Single‐Composition Tunable White‐Light Phosphor

Superior optical, thermal, and mechanical properties of transparent ceramics are very important in the applications of solid lasers, solid‐state lighting, and transparent armors. Herein, a series of (Dy_0.03Ce_xY_0.97?x)₃Al₅O₁₂ transparent ceramics were fabricated using vacuum reactive sintering method. Importantly, these Dy³⁺/Ce³⁺ codoped yttrium aluminum garnet (YAG) transparent ceramics served as single‐composition tunable white‐light phosphors for UV‐LEDs is developed for the first time. By combining with commercially available UV‐LEDs directly, the optimal chromaticity coordinates and correlated color temperature (CCT) are (x = 0.33, y = 0.35) and 5609 K, respectively. Notably, the codoping of Ce³⁺ enhances the luminescent intensity of Dy³⁺ ions while excited at 327 nm. The emission color of YAG transparent ceramics can be tuned from white to yellow through energy transfer between Dy³⁺ and Ce³⁺. These new phosphors, possessing of pure CIE chromaticity and environmentally friendly nature, are promising for applications in white UV‐LEDs.     

Tunable Emission Phosphor Ca4Y6O(SiO4)6:Ce3+, Eu2+: Luminescence and Energy Transfer

A series of Ca_4–yY_6–xO(SiO₄)₆: xCe³⁺, yEu²⁺ samples are synthesized by a high‐temperature solid‐state method. Under 356 nm excitation, Ca₄Y₆O(SiO₄)₆:Ce³⁺ presents a strong blue emission band at 426 nm which are assigned to 4f⁰5d¹→4f¹ transition of Ce³⁺ ion. Ca₄Y₆O(SiO₄)₆:Eu²⁺ shows green emission under 380 nm radiation excitation, and the peak locates at 527 nm which is mainly due to transitions of Eu²⁺ from 4f⁷ ground state to 4f⁶5d¹ excited state. Under 356 nm excitation, a remarkable energy transfer from Ce³⁺ to Eu²⁺ exists in Ca₄Y₆O(SiO₄)₆, and the result reveals that the mechanism of energy transfer is a resonant type via a nonradiative dipole–dipole interaction. The hues of Ca₄Y₆O(SiO₄)₆:Ce³⁺, Eu²⁺ can be adjusted by the energy transfer from Ce³⁺ to Eu²⁺ ions, and a white emission can be achieved by tuning the ratio of Ce³⁺ to Eu²⁺. The results mean that Ce³⁺ may be the effective sensitizer for Eu²⁺‐doped Ca₄Y₆O(SiO₄)₆.     

Facile preparation and optical properties of Te/Pb-free Y3Al5O12:Ce3+ phosphor-in-glass via a screen-printing route for high-power WLEDs

The applications in high-power fields of white light-emitting diodes (WLEDs) are restricted due to their poor thermal stability. Transparent Y₃Al₅O₁₂:Ce³⁺ phosphor-in-glass (YAG-PiG) provides an efficient way to resolve this problem. In this work, novel transparent Te/Pb-free YAG-PiGs are successfully prepared via a facile screen-printing route. It is revealed that 5 mol% Eu₂O₃ optimizes the concentration in substrate glass. Slight erosion of YAG particles occurs in the as-prepared samples. With increasing YAG concentration and film thickness, the intensities of photoluminescence spectra of YAG-PiGs increase. The energy transfer from Eu³⁺ to Ce³⁺ is greatly suppressed. Superior thermal stability and high quantum efficiency are obtained. The optimal optical performance values in terms of a luminous efficiency of 117.2 lm/W, a correlated color temperature of 5859 K and a color rendering index of 77.2 are achieved in YAG-PiGs. All of the results reveal that the as-prepared YAG-PiGs are promising candidates for high-power WLEDs.     

Phosphor‐in‐glass thick film formation with low sintering temperature phosphosilicate glass for robust white LED

Phosphor‐in‐glass (PiG) thick film was fabricated on a borosilicate glass substrate using a conventional screen printing method and employing phosphosilicate glass to allow low‐temperature sintering. The vehicle content and sintering temperature were optimized to form a thick film with a thickness of ~50 μm. Commercial yellow (Y₃Al₅O₁₂:Ce³⁺) and red (CaAlSiN₃:Eu²⁺) phosphors were successfully incorporated within the glass matrix and then sintered at 550°C. Color‐tunable white LEDs were achieved using the PiG thick films as a color converter by varying the glass to phosphor (GtP) ratio. The high luminous efficacy of up to ~120 lm/W and high color rendering index of up to 89 in combination with the thermal quenching property prove the practical feasibility of the PiG thick films for high‐power/high‐brightness LED applications.     

Elaboration,Structure, and Luminescence of Eu3+‐Doped BaLuF5‐Based Transparent Glass‐Ceramics

Novel Eu³⁺‐doped transparent oxyfluoride glass‐ceramics containing BaLuF₅ nanocrystals were successfully fabricated by melt‐quenching technique for the first time. Analyses of XRD patterns prove that the new precipitated glass‐ceramics are crystallized in cubic BaLuF₅ based on isostructural BaGdF₅. Intense red emissions observed in glass ceramics are attributed to the enrichment of Eu³⁺ ions into BaLuF₅ nanocrystals. Besides, obvious stark splitting emissions, low forced electric dipole ⁵D₀→⁷F₂ transition, and long decay lifetimes of Eu³⁺ ions also evidence the partition of Eu³⁺ ions into BaLuF₅ nanocrystals with low phonon energy. Such transparent material may find applications in photonics.     

Fabrication and Characterization of Transparent (Y0.98−xTb0.02Eux)2O3 Ceramics with Color‐Tailorable Emission

Transparent (Y_0.98?xTb_0.02Eu_x)₂O₃ (x = 0–0.04) ceramics with color‐tailorable emission have been successfully fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h. These ceramics have the in‐line transmittances of ~73%–76% at 613 nm, the wavelength of Eu³⁺ emission (the ⁵D₀→⁷F₂ transition). Thermodynamic calculation indicates that the Tb⁴⁺ ions in the starting oxide powder can essentially be reduced to Tb³⁺ under ~10^?3 Pa (the pressure for vacuum sintering) when the temperature is above ~394°C. The photoluminescence excitation (PLE) spectra of the transparent (Y_0.98?xTb_0.02Eu_x)₂O₃ ceramics exhibit one spin‐forbidden (high‐spin, HS) band at ~323 nm and two spin‐allowed (low‐spin, LS) bands at ~303 and 281 nm. Improved emissions were observed for both Eu³⁺ and Tb³⁺ by varying the excitation wavelength from 270 to 323 nm, without notably changing the color coordinates of the whole emission. The transparent (Y_0.98Tb_0.02)₂O₃ ceramic exhibits the typical green emission of Tb³⁺ at 544 nm (the ⁵D₄→⁷F₅ transition). With increasing Eu³⁺ incorporation, the emission color of the (Y_0.98?xTb_0.02Eu_x)₂O₃ ceramics can be precisely tailored from yellowish‐green to reddish‐orange via the effective energy transfer from Tb³⁺ to Eu³⁺ under the excitation with the peak wavelength of the HS band. At the maximum Eu³⁺ emission intensity (x = 0.02), the ceramic shows a high energy‐transfer efficiency of ~85.3%. The fluorescence lifetimes of both the 544 nm Tb³⁺ and 613 nm Eu³⁺ emissions were found to decrease with increasing Eu³⁺ concentration.     

Optical Performances of YAG:Re3+ (Re = Ce,Eu) Phosphor Films with Co‐Doping Tb3+ as Energy‐Transfer Sensitizer

The paper investigates the effect of co‐doping Tb³⁺ as an energy‐transfer sensitizer on optical properties of YAG:Re³⁺ (where, Re = Ce, Eu) phosphor films synthesized by sol–gel route. The results suggest that, Tb³⁺ is a promising sensitizer for improving the optical performances of the as‐prepared YAG:Re³⁺ films, and a Tb³⁺ co‐doping concentration of 20% was found to be an optimum level on account of Tb³⁺ concentration quenching. Due to the energy‐transfer processes of Tb³⁺→Re³⁺, the as‐prepared Y_0.8 Tb_0.2AG:Re³⁺ films displayed strong abilities of absorption in the ultraviolet (UV) light range, and bright green–yellow emission for YAG:Ce³⁺ or red emission for YAG:Eu³⁺ under 275 nm irradiation, which could be utilized for UV‐excited WLED and display applications.     

Fabrication and Luminescence Properties of Transparent Glass‐Ceramics Containing Eu3+‐Doped TbPO4 Nanocrystals

Eu³⁺‐doped transparent phosphate precursor glasses and glass‐ceramics containing TbPO₄ nanocrystals were successfully fabricated by a conventional high‐temperature melt‐quenching technique for the first time. The formation of TbPO₄ nanocrystals was identified through X‐ray diffraction, transmission electron microscopy, high‐resolution transmission electron microscopy, selected‐area electron diffraction, and photoluminescence emission spectra. The obvious Stark splitting of ⁵D₀‐⁷F_J (J = 1, 2, 4) transitions of Eu³⁺and the increase of internal quantum efficiency indicate the incorporation of Eu³⁺ into TbPO₄ nanocrystals. Energy transfer from Tb³⁺ ions to Eu³⁺ ions was investigated using excitation and emission spectra at room temperature. The glass‐ceramics obtained have more efficient Tb³⁺ to Eu³⁺ energy transfer than the glass, and so serve as good hosts for luminescent materials.     

Novel Broadband Excited and Linear Red‐Emitting Ba2Y(BO3)2Cl: Ce3+, Tb3+, Eu3+ Phosphor: Luminescence and Energy Transfer

A series of Ce³⁺, Tb³⁺, Eu³⁺ tri‐doped Ba₂Y(BO₃)₂Cl red‐emitting phosphor have been synthesized by solid‐state method. The Ce³⁺→Tb³⁺→Eu³⁺ energy‐transfer scheme has been proposed to realize the sensitization of Eu³⁺ ion emission by Ce³⁺ ions. Following this energy‐transfer model, near‐UV convertible Eu³⁺‐activated red phosphors have been obtained in Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ phosphors. Energy transfers from Ce³⁺ to Tb³⁺, and Tb³⁺ to Eu³⁺, as well as corresponding energy‐transfer efficiencies are investigated. The combination of narrow‐line red emission and near‐UV broadband excitation makes Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ as a novel and efficient red phosphor for NUV LED applications.     

Enhanced Sunlight Excited 1‐μm Emission in Cr3+–Yb3+ Codoped Transparent Glass‐Ceramics Containing Y3Al5O12 Nanocrystals

Cr³⁺–Yb³⁺ codoped transparent glass‐ceramics containing Y₃Al₅O₁₂ nanocrystals were prepared by heat treatment of as‐prepared glass sample and characterized by X‐ray diffraction and transmission electron microscopy. The efficient energy transfer from Cr³⁺ to Yb³⁺ ions through multi‐phonon‐assisted process was confirmed by the luminescence spectrum and fluorescent lifetime measurements. When excited by the lights from a solar simulator in the wavelength region of 400–800 nm, greatly enhanced near‐infrared emission around 1 μm was achieved from Cr³⁺–Yb³⁺ codoped glass ceramic compared with that from as‐prepared glass and Ce³⁺–Yb³⁺ codoped glass ceramic. These results demonstrate that the Cr³⁺–Yb³⁺ codoped glass ceramic is a promising material for enhancement of the efficiency of solar energy utilization.     

Ce3+‐ and Dy3+‐Doped Oxyfluoride Borosilicate Glasses with Near White Luminescence

A series of Ce³⁺/Dy³⁺‐doped oxyfluoride borosilicate glasses prepared by melt‐quenching method are investigated for light‐emitting diodes applications. These glasses are studied via X‐ray diffraction (XRD), optical absorption, photoluminescence (PL), color coordinate, and Fourier transform infrared (FT‐IR) spectra. We find that the absorption and emission bands of Ce³⁺ ions move to the longer wavelengths with increasing Ce³⁺ concentrations and decreasing B₂O₃ and Al₂O₃ contents in the glass compositions. We also discover the emission behavior of Ce³⁺ ions is dependent on the excitation wavelengths. The glass structure variations with changing glass compositions are examined using the FT‐IR spectra. The influence of glass network structure on the luminescence of Ce³⁺/Dy³⁺ codoped glasses is studied. Furthermore, the near‐ideal white light emission (color coordinate x = 0.32, y = 0.32) from the Ce³⁺/Dy³⁺ codoped glasses excited at 350 nm UV light is realized.     

Effects of Gd Substitution on Sintering and Optical Properties of Highly Transparent (Y0.95−xGdxEu0.05)2O3 Ceramics

Highly transparent (Y_0.95?xGd_xEu_0.05)₂O₃ (x = 0.15–0.55) ceramics have been fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h with the in‐line transmittances of 73.6%–79.5% at the Eu³⁺ emission wavelength of 613 nm (~91.9%–99.3% of the theoretical transmittance of Y_1.34Gd_0.6Eu_0.06O₃ single crystal), whereas the x = 0.65 ceramic undergoes a phase transformation at 1650°C and has a transparency of 53.4% at the lower sintering temperature of 1625°C. The effects of Gd³⁺ substitution for Y³⁺ on the particle characteristics, sintering kinetics, and optical performances of the materials were systematically studied. The results show that (1) calcining the layered rare‐earth hydroxide precursors of the ternary Y–Gd–Eu system yielded rounded oxide particles with greatly reduced hard agglomeration and the particle/crystallite size slightly decreases along with increasing Gd³⁺ incorporation; (2) in the temperature range 1100°C–1480°C, the sintering kinetics of (Y_0.95?xGd_xEu_0.05)₂O₃ is mainly controlled by grain‐boundary diffusion with similar activation energies of ~230 kJ/mol; (3) Gd³⁺ addition promotes grain growth and densification in the temperature range 1100°C–1400°C; (4) the bandgap energies of the (Y_0.95?xGd_xEu_0.05)₂O₃ ceramics generally decrease with increasing x; however, they are much lower than those of the oxide powders; (5) both the oxide powders and the transparent ceramics exhibit the typical red emission of Eu³⁺ at ~613 nm (the ⁵D₀→⁷F₂ transition) under charge transfer (CT) excitation. Gd³⁺ incorporation enhances the photoluminescence and shortens the fluorescence lifetime of Eu³⁺.     

Highly thermal stable and color tunable composite fluorescent ceramics for high-power white LEDs

All-inorganic fluorescent materials with high luminescence efficiency, high thermal stability and adjustable spectrum are urgently needed, especially for high-power white LEDs. In this work, Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺ fluorescent ceramics were prepared firstly by vacuum sintering technology, and then Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺/SrAlSiN₃: Eu²⁺ composite fluorescent ceramics were synthesized by technology screen-printing and laser ablation. Under 460 nm excitation, the composite fluorescent ceramic exhibits a broad emission band from 500 nm to 675 nm, which is attributed to the 5d → 4f transitions of Ce³⁺ and Eu²⁺ ions, respectively. By controlling the screen-printed times, the color coordinates of the composite fluorescent ceramics could be tuned from (0.3125, 0.2437) to (0.4106, 0.3824), and the correlated color temperature can vary from 3296 to 9689 K. In particular, the thermal stability of composite fluorescent ceramics is improved obviously after laser ablation. At 423 K, the luminescence intensity at 535 nm and 620 remains 91% and 94% of that at room temperature, respectively. Combining a 460 nm blue chip and the composite fluorescent ceramic, a white LED with CRI = 90, and the maximum luminous efficiency can be up to 148 lm/W. Our results indicate that Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺/SrAlSiN₃: Eu²⁺ composite fluorescent ceramics could be used in high-power white LEDs.     

Structural and luminescence properties of silica powders and transparent glass‐ceramics containing LaF3:Eu3+ nanocrystals

In this work, silica powders and transparent glass‐ceramic materials containing LaF₃:Eu³⁺ nanocrystals were synthesized using the low‐temperature sol‐gel technique. Prepared samples were characterized by TG/DSC analysis as well as X‐ray diffraction and IR spectroscopy. The transformation from liquid sols toward bulk powders and xerogels was also examined and analyzed. The optical behavior of prepared Eu³⁺‐doped sol‐gel samples were evaluated based on photoluminescence excitation (PLE: λ_em = 611 nm) and emission (PL: λ_exc = 393 nm, λ_exc = 397 nm) spectra as well as luminescence decay analysis. The series of luminescence lines located within reddish‐orange spectral scope were registered and identified as the intra‐configurational 4f⁶‐4f⁶ transitions originated from Eu³⁺ optically active ions (⁵D₀ → ⁷F_J, J = 0‐4). Moreover, the R/O‐ratio was also calculated to estimate the symmetry in local framework around Eu³⁺ ions. The luminescence spectra and double‐exponential character of decay curves recorded for fabricated nanocrystalline sol‐gel samples (τ₁(⁵D₀) = 2.07 ms, τ₂(⁵D₀) = 8.07 ms and τ₁(⁵D₀) = 0.79 ms, τ₂(⁵D₀) = 9.76 ms for powders and glass‐ceramics, respectively) indicated the successful migration of optically active Eu³⁺ ions from amorphous silica framework to low phonon energy LaF₃ nanocrystal phase.     

Enhanced Light Storage of SrAl2O4 Glass‐Ceramics Controlled by Selective Europium Reduction

A luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics with high transparency in the visible region was successfully synthesized using the frozen sorbet technique with the control of O₂ partial pressure () for the oxidation of Eu²⁺ ions. The glass‐ceramics include Eu²⁺, Eu³⁺, and Dy³⁺ ions, and thus exhibits three characteristic types of emission bands, 4f–5d at around 520 nm (Eu²⁺ ions), 4f–4f at 610 nm (Eu³⁺ ions), and 480 nm (Dy³⁺ ions). The Eu, Dy: SrAl₂O₄ glass‐ceramics provide remarkable long‐persistent luminescence under dark condition. The glass‐ceramics also exhibits color‐changing luminescence in the visible region based on their remarkable light storage properties. The luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics using the frozen sorbet technique with control of are promising materials for application in novel photonic and light storage materials.     

Erosion behavior and luminescence properties of Y3Al5O12:Ce3+-embedded calcium bismuth borate glass-ceramics for WLEDs

Current white light emitting diodes (WLEDs) have poor thermal stability and lack red-light, which restrict their applications in high-power and high-color-rendering-index solid-state lighting. YAG glass-ceramics provide an efficient way to resolve these problems. Herein, novel YAG-embedded calcium bismuth borate glass-ceramics (YAG-GCs) with Eu³⁺ doping were prepared using a rapid melt quenching technique. The precursor glass exhibits superior YAG refractive index matching and high transmittance. Differential scanning calorimeter simulations verify YAG particles react with the precursor glass. The degree of YAG erosion is slight but monotonously increases with the co-sintering temperature from 640 to 700°C. The erosion products probably contain YAB (Al₃Y(BO₃)₄), Al₃Eu(BO₃)₄, Bi₂₄B₂O₃₉, and Ca₁₂Al₁₄O₃₃ phases, and the Bi ion valence state is maintained during the reaction process. The energy transfer from Ce³⁺ to Eu³⁺ is suppressed. The YAG-GC PL intensities monotonously increase as the co-sintering temperature decrease from 640 to 700°C and the YAG content increase from 2.5 to 7 wt.%. The optical parameters of a WLEDs packed by YAG-GCs and blue chips are a luminous efficiency of 105.3 lm/W, correlated color temperature of 3940 K and color rendering index of 70.1. The as-prepared YAG-GCs are promising candidates for high-power, warm WLEDs due to their superior thermal stability, high quantum efficiency, and low cost.     

Synthesis and Characterization of Eu3+‐Doped Transparent Glass–ceramics Containing Nanocrystalline SrIINbIVO3

The glass–ceramics containing a rarely achievable nanocrystalline Sr^IINb^IVO₃ phase in the 53.75SiO₂–18.25K₂O–9Bi₂O₃–9SrO–9Nb₂O₅–0.5CeO₂–0.5Eu₂O₃ (mol%) glass system were prepared by the melt‐quench technique followed by a two‐stage controlled heat treatment. The unusual oxidation state of Nb in Sr^IINb^IVO₃ crystal is 4+ and upon heat treatment of the samples at lower temperature of 500°C for several hours, the glass composition and chemical environment around Nb ions played a key role for the formation of Sr^IINb^IVO₃ in the glass–ceramics. The microstructure of the glass–ceramics was studied using TEM and FESEM. The TEM images advocate 10–40 nm crystallite size of Sr^IINb^IVO₃. FTIR study confirms that all the samples consist of SiO₄, BiO₃, BiO₆, and NbO₆ structural units. The refractive index at different wavelengths was found to vary in the range 1.7105–1.7905 and increase with increase in heat‐treatment time. The luminescence spectra of Eu³⁺‐doped glass and glass–ceramics were recorded at 465 nm excitation wavelength and the luminescence intensity is found to be increased with heat‐treatment time due to increase in crystallinity. The high intensity ratio of ⁵D₀→⁷F₂ to ⁵D₀→⁷F₁ indicates that the Eu³⁺‐doped nanocrystalline Sr^IINb^IVO₃ glass–ceramics are promising candidate materials as red‐light source.     

The Investigations of the Pr,Gd, Si–N Doping,and Phosphor Curvature Effects on the Performances of YAG‐Based WLEDs

The effect of the phosphor curvature in the range 0.1766–0.2589 mm^?1 on the luminous efficacy of Y_2.95Al₅O₁₂:0.05Ce³⁺ (YAG)‐based white‐light‐emitting diodes (WLEDs) was investigated at the similar correlated color temperature (CCT) of ~6300 K by tuning the concentration of YAG phosphors in the phosphor layer ranging from 7.5 to 15 wt%. It was found that both the luminous efficacy and luminous power increased monotonically with the increasing curvature. The luminous efficacy (=82.4 lm/W) and luminous power (=297.85 mW) of the YAG‐based WLED at the preferable phosphor curvature of 0.2589 mm^?1 were 19.44% and 17.36%, respectively, higher than those at the curvature of 0.1766 mm^?1 under 350 mA. This finding reveals that the surface curvature of phosphor layers is a critical factor which cannot be ignored for the investigation of the light output of phosphor‐converted WLEDs. Moreover, the color rendering index (CRI) enhancement of YAG‐based WLED with substitution of Y_2.94Al₅O₁₂:0.05Ce³⁺, 0.01Pr³⁺ (YPrAG), Y_2.45Gd_0.5Al₅O₁₂:0.05Ce³⁺ (YGdAG), and Y_2.95Al_4.8Si_0.2O_11.8N_0.2:0.05Ce³⁺ (YAlSiON) for YAG were assessed under the same phosphor curvature of 0.2589 mm^?1 and the similar CCT ~6350 K. Taking the luminous efficacy, preparation cost of phosphors, and CRI into consideration, we suggest that the YGdAG is a preferable candidate for replacing the YAG for use in WLEDs among the four kinds of phosphors. Compared with the YAG (7.5 wt%)‐based WLED, the YGdAG (7 wt%)‐based WLED exhibited an improved CRI, less preparation cost of phosphors, and the acceptable reduction in luminous efficacy under 350 mA.     

Microstructure of Eu3+‐Doped Perovskites‐Type Niobate Ceramic La3Mg2NbO9

Eu³⁺‐doped red‐emitting ceramics of Eu³⁺‐doped La₃Mg₂NbO₉ were prepared via typical solid state. X‐ray diffraction and scanning electron microscope were utilized to characterize the ceramics. The photoluminescence excitation and emission spectra, the fluorescence decay curves, and color coordinates were investigated. The concentration quenching of the samples were discussed as well. The microstructures of the ceramics were discussed according to the spectral properties of probe ions of Eu³⁺, for example, substitution sites for Eu³⁺, inhomogeneous broadening and splitting of the emission bands, nonexponential decay, ⁵D₀→⁷F₀ emission transition, distorted symmetry sites, etc. The crystal structure of La₃Mg₂NbO₉ is heavily distorted due to the mixed occupation of Mg and Nb on B sites. Eu³⁺ ions only substitute La³⁺ sites and Eu³⁺ ions (or rare‐earth ions) are arranged in the heavily disordered environments over the whole structure in La₃Mg₂NbO₉.