Surface activities,biodegradability and antimicrobial properties of n-alkyl glucosides,mannosides and galactosides

n-Alkyl α-and β-glucopyranosides, α-D-mannopyranosides and β-D-galactopyranosides with alkyl chains having from 8 to 12 carbon atoms were synthesized and their surface properties-such as static surface tension (γ), critical micelle concentration (CMC), occupation area of molecule, dynamic surface tension and foaming properties, biodegradability and antimicrobial activities—were evaluated. Alkyl glycosides containing C8 to C12 carbon chains showed surface activities and critical micelle concentrations. D-Glucoside, D-mannoside and D-galactoside having the same alkyl chain showed similar surface tension lowering at CMC (γ_CMC) and occupation area of the molecule at the surface. Among the alkyl glucosides, α-anomers were less hydrophilic than β-anomers. All alkyl glycosides tested in this study were readily biodegraded by activated sludge of a municipal sewage plant compared to those of ethoxylated nonionic alcohols. The difference of the hydrophilic glycopyranoside group in biodegradability was not seen clearly. n-Alkyl glycosides containing C8 to C12 alkyl chains showed a broad spectrum of increasing antimicrobial activity. n-Dodecyl α-D-mannopyranoside was the most effective, the order of antimicrobial activity being mannopyranoside > glucopyranoside > galactopyranoside group. Members of this class of compounds exhibit the physicochemical and biological properties needed both for a wide range of applications and for environmental acceptance.     

Preparation and properties of double- or triple- chain surfactants with two sulfonate groups derived fromN- Acyldiethanolamines

Bis(sulfonate) types of amphipathic compounds with three long- chain alkyl groups were prepared by the reaction ofN- (long- chain acyl)diethanolamine diglycidyl ethers with long- chain fatty alcohols, followed by the reaction with propanesultone. The diglycidyl ethers were easily obtained from the correspondingN- acyldiethanolamines and epichlorohydrin in the presence of a phasetransfer catalyst. The same types of compounds with two longchain alkyl groups were also prepared from Nacetyldiethanolamine according to similar procedures. All these new double- or triple- chain surfactants were soluble in water and showed much better micelle forming and ability to lower surface tension than general types of single- chain surfactants with one sulfonate group. The critical micelle concentration (CMC) and γ_CMC values of the triple- chain compounds were still much smaller than those of the corresponding double- chain compounds with two common alkyl groups. The efficiency of adsorption at the water/air interface (pC₂₀) of these surfactants was very high. Their foaming properties, wetting ability toward a felt chip, and lime- soap dispersing ability were measured. To whom correspondence should be addressed at Department of Applied Chemistry, Faculty of Engineering, Osaka University, Yamadaoka 2-1, Suita, Osaka 565, Japan.     

Selection of surfactant pairs for optimization of interfacial properties

Guidelines are provided for the selection of surfactant pairs when synergism in various interfacial properties in aqueous media is desired. To maximize the reduction of the critical micelle concentration, the two surfactants should show strong attractive interaction in the mixed micelle; in order to maximize efficiency in surface tension reduction, strong interaction in the mixed monolayer at the aqueous solution/air interface (large negativeβ values is needed). The more surface-active material should predominate in the mixture. When interaction is not strong, the two surface-active materials used should have approximately equal surface activities and should be used at equimolar concentration in the aqueous phase. To minimize the surface tension (γ) of the solution, the surfactant-surfactant attractive interaction in the mixed monolayer at the aqueous solution/air interface must exceed that in the mixed micelle. Optimization can be achieved by using two surfactants with approximately equal γ values at their respective critical micelle concentrations (CMC’s). When these γ values are not equal, the surfactant with the higher γ value at its CMC should have the smaller area/molecule at the surface. The greater the difference between attractive interaction at the interface and in the micelle, the lower the value of the surface tension.     

The relationship of structure to properties in surfactants: V. Synthesis and properties of α,ω-bis (sodium p-sulfophenoxy)alkanes

A series of symmetrical surfactants containing two arylsulfonate groups in the molecule, of general structure, where n=4, 6, 8, 10 and 12, has been synthesized. The synthesis involves sulfonation of the corresponding diaryl ethers, isolation, purification, and characterization of the free para-disulfonic acids, followed by conversion of the latter to the disodium salts. The nuclear magnetic resonance (NMR) spectra of the products indicate that they are the para-sulfonated compounds substantially free of the ortho isomers. The Krafft points, surface tension-log concentration curves, critical micelle concentrations, and areas/molecule at the liquid/air interface have been determined. The surface area/molecule indicate that these compounds are lying flat in the liquid/air interface.     

Relationship of structure to properties of surfactants. 16. Linear decyldiphenylether sulfonates

The properties of some well-characterized sodium linear decyldiphenylether (C₁₀DPE)sulfonates have been studied. Among the properties investigated are dynamic and equilibrium surface tension, critical micelle concentration (CMC), area per molecule at the aqueous solution/air interface, wetting time by the Draves technique, foaming by the Ross-Miles method, solubilization, and hydrotropy. The decyldiphenylether moiety appears to be equivalent to a terminally substituted straight alkyl chain of 16 carbon atoms. The trialkyl- and dialkyl-mono-sulfonates have solubilities of < 0.01 g/dm³ in water, but are readily soluble in hexane. The didecyldiphenyl ether disulfonate (DADS) has a very low CMC value (1.0 × 10⁻⁵ mol dm⁻³) in aqueous 0.1 N Na⁺ solution (NaCl), characteristic of surfactants with two hydrophilic and two hydrophobic groups. It also has a much larger area per molecule at the aqueous solution/air interface than the monodecyldiphenyl-ether monosulfonate (MAMS) and a much higher surface tension at the CMC. MAMS has a much lower surface tension at a surface age of 1 second (γ_1s) than either DADS or the monodecyldiphenylether disulfonate (MADS). In agreement with γ_1s and γ_eq values, wetting times increase in the order: MAMS < DADS < MADS and initial foam heights decrease in the order: MAMS > DADS > MADS. Solubilization for three water-insoluble surfactants decreases in the order: DADS > MAMS > MADS, while hydrotropy is most pronounced with the disulfonates.     

Surface properties of linear alkyl benzene sulfonates in hard river water

Surface properties of a series of highly purified linear alkyl benzene sulfonates were extensively studied in hard river water. The effects of water hardness, alkyl chain length and position of the phenyl sulfonate group in the molecule on such surface properties as pC₂₀, critical micelle concentration (CMC), γ_CMC, CMC/C₂₀ ratio, and minimum area per molecule at the interface are discussed in detail. The position of phenyl sulfonate group in the molecule was found to have a pronounced effect on the CMC, γ_CMC value, CMC/C₂₀ ratio, and, to the contrary, a relatively small effect on the pC₂₀ value. The linear relationship between pC₂₀ or-log CMC, and m, the number of carbon atoms in the alkyl chain, was found for surfactants with the phenyl sulfonate group either at the terminal position or at the more central position in the molecule. γ_CMC decreases but the CMC value increases, when the position of phenyl sulfonate group moves from the terminal toward a more central position of the molecule, reflecting the “Hartley Effect” resulting from the branched alkyl chain.     

Synthesis, characterization and surface properties of 1-N-l-tryptophan-glycerol-ether surfactants

A novel homologous series of 1-N-l-tryptophanglycerol-ether surfactants was synthesized and characterized. The precursor compounds, 3-alkyloxy-1-chloropropan-2-ols, were prepared from epichlorohydrin and aliphatic alcohols with alkyl chain lengths of 9–16 carbon atoms. Tryptophan was then attached to the monosubstituted glycerol backbone from its α-amino group through an α-NH-C bond. Structural assignment of the new compounds was made on the basis of elemental analysis and spectroscopic data. Critical micelle concentrations of the new surfactants, as well as the negative logs of the surfactant concentrations required to reduce the surface tension of the solvent by 20 mN/m (pC ₂₀) and the interfacial areas occupied by the surfactant molecules, were calculated from aqueous surface tension measurements using the Wilhelmy plate technique.     

Synthesis and Properties of Dissymmetric Gemini Surfactants

A series of novel dissymmetric gemini cationics surfactants was synthesized by three-step reactions. The dissymmetric gemini surfactants contain a dodecanoic acid dimethylethylamine ester as the constant cationic part on one side of the hydroxypropyl center and a similar other cationic part, but with a different acid length (from octanoic to palmitic), on the other side. The critical micelle concentration (CMC) and the effectiveness of surface tension reduction (γ _CMC) were determined. The surface tension measurements of dissymmetric gemini surfactants showed good water solubility, and low CMC had great efficiency in lowering the surface tension and a strong adsorption at the air/water interface. The CMC was observed to increase initially with the increase of the ester bond alkyl group. They also showed good foaming properties and wetting capabilites.     

Surface and Self-Aggregation Properties of Bis-Benzimidazolones Derivatives of <Emphasis Type="SmallCaps">d</Emphasis>-Glucose

The surface and self-aggregation properties in water of a new series of amphiphilic homologues, bis-benzimidazolone derivatives of d-glucose, were investigated. Parameters such as the maximal surface excess concentration, minimal area per molecule at the interface, and critical micelle concentration (CMC) were found to be significantly dependent on the hydrophobic alkyl chain length. The synthesized compounds form micelles at remarkably low concentrations, and CMCs derived from surface tension measurements show a minimum as a function of the alkyl chain length; this unusual trend can be attributed to the formation of submicellar aggregates in compounds with long alkyl chains, as evidenced from fluorescence probe spectroscopy data. At high surfactant concentrations, lyotropic liquid crystalline phases with hexagonal structure are formed. Small angle X-ray scattering measurements indicate that the characteristic nanoscopic lengths increase with water swelling and alkyl chain length.     

Relationship of structure to properties of surfactants. 15 Isomeric sulfated polyoxyethylenated Guerbet alcohols

The properties at 25°C in aqueous 0.1M NaCl at the aqueous solution/air, aqueous solution/hexadecane, and aqueous solution/hydrophobic solid interfaces of two isomeric Guerbet alcohol-derived surfactants C₈H₁₇CH(C₆H₁₃)CH₂(OC₂H₄)₅SO₄Na, one in which the octyl and hexyl groups are both linear (L isomer), the other in which they are both highly branched (B isomer), have been investigated and compared in some cases with commercial sodium linear dodecylbenzene-sulfonate (LAS). The cmc value increases, the pC₂₀ value decreases, and the ΔG^o _ad value becomes less negative in the order: L isomer—B isomer—LAS. The minimum area/molecule at the aqueous solution/air interface increases in the order: LAS≪L isomer<B isomer. The L isomer is slightly more hydrophobic than the B isomer, and both are considerably more surface-active than LAS. The greater steric inhibition to micellization in the B isomer results in the lowest minimum surface tension. Both isomers have similar minimum interfacial tension values against hexadecane. Unusually small minimum area/molecule values for the two isomers at the aqueous solution/hydrophobic solid interface may indicate multilayer adsorption there. Both isomers are more efficient at reducing the contact angle than LAS. Mixtures of the B isomer with the corresponding unsulfated Guerbet alcohol show only weak interaction between the two. No synergism in surface (or interfacial) tension reduction efficiency or micelle formation exists at either the aqueous solution/air or aqueous solution interface but the mixture does show synergism in surface (or interfacial) tension reduction effectiveness, yielding a surface tension value of 28.2 dynes/cm, and an interfacial tension value of 0.1 dyne/cm against hexadecane. Draves wetting times increase in the order: B isomer<LAS<L isomer, and Ross-Miles initial foam heights decrease in the order B isomer ≈LAS>L isomer. Presented in part at the American Oil Chemists’ Society meeting in Cincinnati, May, 1989.     

Selective access to novel aryl alkyl disulfonates via photosulfochlorination process: An eco-benign approach to a highly active class of surfactants

In this work we report the synthesis of a new family of surfactants based on aryl alkyl disulfonates; the latter compounds were derived from a mixture of linear alkylbenzene with the resulting disulfonate groups residing on the linear alkyl side-chain rather than the usual aromatic ring structure. The Reed sulfochlorination reaction was successfully utilized to selectively promote the formation of disulfonates on the alkyl group. A number of analytical methods in the form of liquid chromatography–mass spectrometry (LC–MS), gas chromatography–mass spectrometry (GC–MS), Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) were used to characterize the resulting compounds and intermediates. The critical micelle concentration, the surface tension at the critical micelle concentration, the surface excess concentration at surface tension, and the area per molecule were measured at different concentrations and temperatures. Thermodynamic parameters and Krafft temperature were also determined. The obtained results were compared to those of commercial n-dodecylbenzene sulfonates and linear alkylbenzene sulfonates surfactants, showing that these new synthesized surfactants present good surface properties.     

Surface and thermodynamic parameters of sodium N-acyl sarcosinate surfactant solutions

Surface tension as a function of concentration and temperature was measured for solutions of N-acyl sarcosinates, RCON(CH₃)CH₂COONa. From the intersection points in the (γ-log c) curves, the critical micelle concentration (CMC) was determined at 20, 35, 50, and 65°C. Structural effects on the CMC, maximum surface excess, and the minimum area per molecule at the aqueous solution/air interface are discussed. The free energy, enthalpy, and entropy of micellization and adsorption of surfactant solutions also were investigated.     

Synergistic Behavior Between Zwitterionic Surfactant α-Decylbetaine and Anionic Surfactant Sodium Dodecyl Sulfate

Here, we present experimental surface tension isotherms of mixed solutions of a zwitterionic surfactant α-decylbetaine (DB) and an anionic surfactant sodium dodecyl sulfate (SDS) in different molar ratios. These mixed solutions show a composition dependency with respect to both surface tension effectiveness and critical micelle concentration. The pseudo-regular solution theory has been used to evaluate the interaction parameters in the micelle, β ^m and at the surface, β ^s. The results revealed that the mixed solutions of DB/SDS behave synergistically in both surface tension reduction effectiveness and mixed micelle formation at all mole fractions investigated. The values of adsorption area per surfactant molecule at air/solution interface were estimated, which provides some useful information on evaluating the interaction between DB and SDS in mixed adsorbed monolayers. The solubilization behaviors of toluene in DB/SDS mixed solutions were also investigated to help in understanding the structure of mixed micelles of DB and SDS.     

Synthesis, Characterization and Surface Activity of Alkyl m-Xylene Sulfonate Isomers

This paper deals with the synthesis of a series of alkyl m-xylene sulfonate isomers (with the m-xylene located at the eighth carbon atom along the long alkyl chain) by the Friedel?CCrafts reaction, and the Grignard reaction followed by hydrogenation. The structures were confirmed by ¹H NMR. All analytical methods indicated high levels of purity of the isomers with the eighth carbon atom at the long alkyl chain. The critical micelle concentration (CMC), surface tension and maximum surface excess concentration at the CMC and area per molecule at the interface were determined. As the long alkyl chains increased the surfactant molecule tends to pack closely at the gas?Cliquid interface. Accordingly, the CMC decreased, the adsorption density increased, and the surface tension reduction was strengthened.     

Mixed Micellization of Cationic Gemini Surfactants with Primary Linear Alkylamines

Due to the potential use of amines as co-surfactants in microemulsions, the effect of adding alkylamines (C₄–C₈NH₂) on the aggregation properties of cationic gemini surfactants [pentanediyl-1, 5-bis(dimethylcetylammonium bromide) and hexanediyl-1, 6-bis(dimethylcetylammonium bromide), referred to as 16-5-16 and 16-6-16 compounds] has been studied using tensiometry at 303 K. Data on critical micelle concentration (CMC), the surface properties C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Г_max (maximum surface excess), A _min (minimum surface area per molecule) evaluated from the surface tension versus surfactant concentration plot, the interaction parameters β^σ (for mixed monolayer formation at the aqueous solution/air interface), and β^m (for mixed micelle formation in aqueous medium) are reported. A synergistic interaction was observed both in the micelle as well as at interface, as evident from interaction parameters. Theoretical models of Clint, Rubingh and Rosen were used to explain and compare the results. More synergistic interaction was observed in 16-5-16 as compared to 16-6-16. The CMC values of 16-s-16 (s = 5, 6) decreased with increasing amine concentrations and the extent of the effect followed the sequence: octylamine > heptylamine > hexylamine > pentylamine > butylamine.     

Synthesis,characterization, and surface properties of phenylalanine-glycerol ether surfactants

A novel homologous series of 1-N-l-phenylalanine-glycerol ether surfactants was synthesized in satisfactory yields via reaction of epichlorohydrin with aliphatic alcohols with alkyl chains of 10–15 carbon atoms. Structural assignment of the new compounds was made on the basis of elemental analysis and spectroscopic data. Critical micelle concentration (CMC), surface tension at the CMC (γ_CMC), surfactant concentration required to reduce the surface tension of the solvent by 20 mN/m (pC₂₀), and the interfacial area occupied by the surfactant molecules (A_min) were determined from aqueous surface tension measurements using the Wilhelmy plate technique.     

Syntheses of 2-(N-2-hydroxyalkyl-N,N-dimethylammonio)ethyl hydrogen phosphates and their physicochemical and antimicrobial properties

A series of new phosphate type of amphoterics having a 2-hydroxyalkyl group as a hydrocarbon chain, 2-(N-2-hydroxyalkyl-N,N-dimethylammonio)ethyl hydrogen phosphates (alkyl[R]:dodecyl, tetradecyl, hexadecyl), was synthesized and their physicochemical properties—isoelectric point, critical micelle concentration (CMCs), occupied area/molecule at interface and the change of free energy of micellization—and antimicrobial properties were investigated in comparison with those of sodium 2-(N-alkyl-N-methylamino)ethyl hydrogen phosphates. It was found that the CMCs and the occupied areas were observed to decrease due to a phosphobetaine moiety and a 2-hydroxyethyl group. Solution properties of the binary system of SDS/2-(N-2-hydroxytetradecyl-N,N-dimethylammonio)ethyl hydrogen phosphate in aqueous solutions were studied in terms of surface tension and pH value. On the other hand, it was observed that the Minimum inhibitory concentration (MICs) of 2-(N-2-hydroxyhexadecyl-N,N-dimethylammonio)ethyl hydrogen phosphate against fungi were smaller than those of chlorhexidine digluconate.     

The Adsorption of Hydroxyl Mixed Ether Nonionic Polymeric Surfactants at Air/Water and Solid/Water Interfaces: Influence of Surfactant Molecular Structure

This paper reports the adsorption of four nonionic Hydroxyl Mixed Ether (HME) polymeric surfactants at air/water and solid/water interfaces. The characteristics of these nonionic surfactants, including surface tension, critical micelle concentration (CMC) and adsorption onto saponite and Teflon are investigated. At the air/water interface, the surface activity of the HME-surfactants decreases with an increasing degree of ethoxylation. The surface tension results indicate that CMC, surface tension at CMC (γ_CMC), and the minimum surface area per adsorbed HME-surfactant molecule (A _min) all increased with the degree of ethoxylation for surfactants with similar hydrocarbon chain lengths. Additionally, a strong adsorption onto the saponite (synthetic clay) was measured and found dependent on both the degree of ethoxylation and the hydrocarbon chain length. This adsorption was also observed by atomic force microscopy (AFM). On the other hand, the adsorption of HME-surfactants on Teflon was independent of the hydrocarbon chain length.     

Preparation and properties of new lactose-based surfactants

A new group of nonionic saccharide-based surfactants, N-alkanoyl-N-methyllactitolamines (alkanoyl: decanoyl, lauroyl, myristoyl, palmitoyl, stearoyl), were synthesized and characterized. Surface properties such as critical micelle concentration, standard free energy of adsorption, standard free energy of micellization, surface tension reduction efficiency, effectiveness of surface tension reduction, surface excess concentration, and surface area demand per molecule as well as foaming properties (i.e., foam volume and foam stability), contact angle, antiraicrobial activity, and biodegradability were determined. The selected performance properties were evaluated in relation to commercially available alkyl polyglucosides (Glukopon 600 EC(HH)-a Henkel product), and oligooxyethylenated decyl (C₁₀E₄) and dodecyl (E₁₂E₅) alcohols. The foaming-stabilizing effect and contact angle suggest that the lactose-derived surfactants that were studied share some common properties with alkyl polyglucosides that are different from those with an oligooxyethylene grouping. All tested N-alkanoyl-N-methyllactitolamines were practically nontoxic to bacteria and yeasts. These compounds are readily biodegradable in the Closed Bottle test inoculated with activated sludge. N-Alkanoyl-N-methyllactitolamines with lower chain lengths (C₁₀–C₁₄) biodegraded at a slightly faster rate. Biological properties showed that this class of compounds fulfills all requirements needed for environmental acceptance.     

Synthesis and Biological Activity of 8-Hydroxyquinoline and 2-Hydroxypyridine Quaternary Ammonium Salts

Two series of quaternary cationic surfactant were synthesized by reaction of 8-hydroxyquinoline and 2-hydroxypyridine with long chain alkyl halides (dodecyl, tetradecyl- and hexadecyl-bromide). Surface tension was measured in aqueous solution for different concentrations at 25 °C. Various surface properties of the synthesized surfactants were evaluated, particularly critical micelle concentration (CMC), efficiency (Π_CMC) as well as maximum surface excess (Γ_max) and minimum surface area (A _min). Micellization and adsorption in liquid/air interfaces thermodynamics were investigated. The synthesized cationic surfactants were evaluated for their biocidal activity. All compounds prepared showed good antibacterial and antifungal activities.