A new compensation method for geometry errors of five-axis machine tools

The present study aims to establish a new compensation method for geometry errors of five-axis machine tools. In the kinematic coordinate translation of five-axis machine tools, the tool orientation is determined by the motion position of machine rotation axes, whereas the tool tip position is determined by both machine linear axes and rotation axes together. Furthermore, as a nonlinear relationship exists between the workpiece coordinates and the machine axes coordinates, errors in the workpiece coordinate system are not directly related to those of the machine axes coordinate system. Consequently, the present study develops a new compensation method, the decouple method, for geometry errors of five-axis machine tools. The method proposed is based on a model that considers the tool orientation error only related to motion of machine rotation axes, and it further calculates the error compensations for rotation axes and linear axes separately, in contrast to the conventional method of calculating them simultaneously, i.e. determines the compensation of machine rotation axes first, and then calculates the compensation associated with the machine linear axes. Finally, the compensation mechanism is applied in the postprocessor of a CAM system and the effectiveness of error compensation is evaluated in real machine cutting using compensated NC code. In comparison with previous methods, the present compensation method has attributes of being simple, straightforward and without any singularity point in the model. The results indicate that the accuracy of positioning was improved by a factor of 8–10. Hence, the new compensation mechanism proposed in this study can effectively compensate geometry errors of five-axis machine tools.     

Ballbar dynamic tests for rotary axes of five-axis CNC machine tools

This paper proposes a new ball bar test method for the inspection of dynamic errors of rotary axes in five-axis CNC machine tools. The test circle is defined in a workpiece coordinate system and the ball bar test is performed by simultaneously driving of linear–rotary axis couple. The effects of the center position and the radius on the setting values, rotational range and measurement sensitivity of the rotary axis were investigated. The proposed ball bar test is performed in two steps: the circular positioning and the circular tracking with a continuous feed. Axial dynamic errors are obtained by subtracting the measured tracking errors from the positioning errors. A ball bar test system (BBTS) was developed to plan the tool path and the tool orientation, to communicate with the five-axis CNC controller and to process the measured data. Error patterns were simulated regarding the gain mismatch, backlash and tracking direction to help a fast diagnosis of the error sources. Simulations and experimental results prove the effectiveness of the new test method.     

A machining test to calibrate rotary axis error motions of five-axis machine tools and its application to thermal deformation test

This paper proposes a machining test to parameterize error motions, or position-dependent geometric errors, of rotary axes in a five-axis machine tool. At the given set of angular positions of rotary axes, a square-shaped step is machined by a straight end mill. By measuring geometric errors of the finished test piece, the position and the orientation of rotary axis average lines (location errors), as well as position-dependent geometric errors of rotary axes, can be numerically identified based on the machine׳s kinematic model. Furthermore, by consequently performing the proposed machining test, one can quantitatively observe how error motions of rotary axes change due to thermal deformation induced mainly by spindle rotation. Experimental demonstration is presented.     

Single setup identification of component errors for rotary axes on five-axis machine tools based on pre-layout of target points and shift of measuring reference

This paper proposes a single setup identification method of 12 component errors of rotary axes on five-axis machine tools by using a touch trigger probe and an artefact. At first, a basic idea of pre-layout of target points combined with the shift of measuring reference is proposed. Influence of setup errors of touch trigger probe and artefact on measuring results is identified quantitatively and included in error models. A single setup measuring method is then designed to identify 12 component errors of rotary axes on five-axis machine tools with a tilting head and a rotary table. The expansion of this basic idea on five-axis machine tools with other configurations is also provided. Validation and uncertainty analysis of the identified values are also provided. The measuring accuracy is guaranteed by the complete error model while the measuring efficiency is improved significantly by the single setup measuring method.     

A generalized on-line estimation and control of five-axis contouring errors of CNC machine tools

Nonlinear and configuration-dependent five-axis kinematics make contouring errors difficult to estimate and control in real time. This paper proposes a generalized method for the on-line estimation and control of five-axis contouring errors. First, a generalized Jacobian function is derived based on screw theory in order to synchronize the motions of linear and rotary drives. The contouring error components contributed by all active drives are estimated through interpolated position commands and the generalized Jacobian function. The estimated axis components of contouring errors are fed back to the position commands of each closed loop servo drive with a proportional gain. The proposed contouring error estimation and control methods are general, and applicable to arbitrary five-axis tool paths and any kinematically admissible five-axis machine tools. The proposed algorithms are verified experimentally on a five-axis machine controlled by a modular research CNC system built in-house. The contouring errors are shown to be reduced by half with the proposed method, which is simple to implement in existing CNC systems.     

Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement

The geometric errors of rotary axes are the fundamental errors of a five-axis machine tool. They directly affect the machining accuracy, and require periodical measurement, identification and compensation. In this paper, a precise calibration and compensation method for the geometric errors of rotary axes on a five-axis machine tool is proposed. The automated measurement is realized by using an on-the-machine touch-trigger technology and an artifact. A calibration algorithm is proposed to calibrate geometric errors of rotary axes based on the relative displacement of the measured reference point. The geometric errors are individually separated and the coupling effect of the geometric errors of two rotary axes can be avoided. The geometry error of the artifact as well as its setup error has little influence on geometric error calibration results. Then a geometric error compensation algorithm is developed by modifying the numeric control (NC) source file. All the geometric errors of the rotary errors are compensated to improve the machining accuracy. The algorithm can be conveniently integrated into the post process. At last, an experiment on a five-axis machine tool with table A-axis and head B-axis structure validates the feasibility of the proposed method.     

Measurement and verification of position-independent geometric errors of a five-axis machine tool using a double ball-bar

In this study, position-independent geometric errors, including offset errors and squareness errors of rotary axes of a five-axis machine tool are measured using a double ball-bar and are verified through compensation. In addition, standard uncertainties of measurement results are calculated to establish their confidence intervals. This requires two measurement paths for each rotary axis, which are involving control of single rotary axis during measurement. So, the measurement paths simplify the measurement process, and reduce measurement cost including less operator effort and measurement time. Set-up errors, which are inevitable during the installation of the balls, are modeled as constants. Their effects on the measurement results are investigated to improve the accuracy of the measurement result. A novel fixture consisting of flexure hinges and two pairs of bolts is used to minimize set-up error by adjusting the ball's position located at the tool nose. Simulation is performed to check the validation of measurement and to analyze the standard uncertainties of the measurement results. Finally, the position-independent geometric errors of the five-axis machine tool (involving a rotary axis and a trunnion axis) are measured using proposed method.     

Modeling and improvement of dynamic contour errors for five-axis machine tools under synchronous measuring paths

In this paper, a contour error model of the tool center point (TCP) for a five-axis machine tool is proposed to estimate dynamic contour errors on three types of measuring paths. A servo tuning approach to achieve five-axis dynamic matching is utilized to improve contouring performance of the cutting trajectory. The TCP control function is developed to generate measuring trajectories where five axes are controlled simultaneously to keep the TCP at a fixed point. The interpolation method of the rotary axes with S-shape acceleration/deceleration (ACC/DEC) is applied to plan smooth five-axis velocity profiles. The contour error model for five axes is derived by substituting five-axis motion commands into servo dynamics models. The steady state contour error (SSCE) model is demonstrated to illustrate three particular dynamic behaviors: the single-circle with amplitude modulation, double-circle effect and offset behavior. Furthermore, the model is also utilized to investigate the behaviors of dynamic contour errors change in 3D space. The factors that affect dynamic contour errors, including the initial setup position, feedrate and five-axis servo gains, are analyzed. With the developed servo tuning process under the measuring paths (CK1, CK2 and CK4), the contour errors caused by servo mismatch are reduced remarkably. Finally, experiments are conducted on a desktop five-axis engraving machine to verify the proposed methodology can improve dynamic contouring accuracy of the TCP significantly.     

Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing

In order to validate volumetric error compensation methods for five-axis machine tools, the machining of test parts has been proposed. For such tests, a coordinate measuring machine (CMM) or other external measurement, outside of the machine tool, is required to measure the accuracy of the machined part. In this paper, a series of machining tests are proposed to validate a compensation strategy and compare the machining accuracy before and after the compensation using only on-machine measurements. The basis of the tests is to machine slots, each completed using two different rotary axes indexations of the CNC machine tool. Using directional derivatives of the volumetric errors, it is possible to verify that a surface mismatch is produced between the two halves of the same slot in the presence of specific machine geometric errors. The mismatch at the both sides of the slot, which materializes the machine volumetric errors is measured using touch probing by the erroneous machine itself and with high accuracy since the measurement of both slot halves can be conducted using a single set of rotary axes indexation and in a volumetric region of a few millimetres. The effect of a compensation strategy is then validated by comparing the surface mismatch value for compensated and uncompensated slots.     

数控机床主轴热误差测温优化布点方案的研究

论文首先介绍了数控机床主轴热误差测温系统的软硬件结构,接着采用主因素策略和互不相关策略对机床的14个测温点进行了优化布点,最终选出了4个优化后的测温点。利用基于最小二乘法的多元线性回归方法对主轴的热变形进行估计后,发现模型的估计效果很好,验证了测温点优化的必要性。     

Construction of an error map of rotary axes on a five-axis machining center by static R-test

This paper proposes an efficient and automated scheme to calibrate error motions of rotary axes on a five-axis machining center by using the R-test. During a five-axis measurement cycle, the R-test probing system measures the three-dimensional displacement of a sphere attached to the spindle in relative to the machine table. Location errors, defined in ISO 230-7, of rotary axes are the most fundamental error factors in the five-axis kinematics. A larger class of error motions can be modeled as geometric errors that vary depending on the angular position of a rotary axis. The objective of this paper is to present an algorithm to identify not only location errors, but also such position-dependent geometric errors, or “error map,” of rotary axes. Its experimental demonstration is presented.     

A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools

The current trend within the Tool and Die manufacturing sector is to machine components directly from hardened material using high speed 5-axis machining. This has been driven by the increasing requirements for cost competitiveness and lead-time reduction. Significant research effort has been applied to the optimisation of the process with factors such as tooling and machining strategies being considerably improved. However, the underlying structures of the machine tools used have remained unchanged and still consist of a serial kinematic chain. One of the standard justifications for the development of machines designed around parallel kinematic chains is that they should exhibit inherently greater stiffness, have higher axis accelerations and be capable of generating significantly higher cutting forces than conventional serial machines. This suggests that they should be ideally suited to the direct manufacture of tools and dies from hardened material.The comparison of different machine tool types is a complex and difficult process, particularly when their structures are fundamentally different. This paper describes an approach used to compare the performance of three very different types of machines. The technique uses two parameters; surface finish and geometric accuracy to assess the relative performance of different machine tools when cutting hardened material. The method is used to compare a serial kinematic 5-axis machining centre, a serial kinematic 3-axis machining centre and a parallel kinematic 6-axis machining centre.The results of the comparison are presented in this paper and show that all the machine tools performed to an equal standard for materials with a hardness of 54HRc but for very hard materials, 62HRc, the parallel kinematic machine out performed the serial machine tools.     

A systematic optimization approach for the calibration of parallel kinematics machine tools by a laser tracker

Parallel kinematics machine has attracted attention as machine tools because of the outstanding features of high dynamics and high stiffness. Although various calibration methods for parallel kinematics machine have been studied, the influence of inaccurate motion of joints is rarely considered in these studies. This paper presents a high-accuracy and high-effective approach for calibration of parallel kinematics machine. In the approach, a differential error model, an optimized model and a statistical method are combined, and the errors of parallel kinematics machine due to inaccurate motion of joints can be reduced by this approach. Specifically, the workspace is symmetrically divided into four subspaces, and a measurement method is suggested by a laser tracker to require the actual pose of the platform in these subspaces. An optimized model is proposed to solve the kinematic parameters in symmetrical subspaces, and then arithmetical mean method is proposed to calculate the final kinematic parameter. In order to achieve the global optimum quickly and precisely, the initial value of the optimal parameter is directly solved based on the differential error model. The proposed approach has been realized on the developed 5-DOF hexapod machine tool, and the experiment result proves that the presented method is very effective and accurate for the calibration of the hexapod machine tool.     

直线式时栅位移传感器的动态测量与频谱分析

针对直线式时栅位移传感器的结构特点,提出了动态测量的主要误差源。采用光栅尺作为母仪,直线式时栅位移传感器空间位置为光栅的测量值,将光栅测量值与直线式时栅位移传感器的预测值进行比较,从而得到动态测量的误差值。对误差值进行数据的截断和采样、异常数据剔除,然后对误差值进行幅值谱和相位谱分析,采用误差分离和谐波修正,研制高精度的直线式时栅位移传感器。     

基于高精度位移传感器的机床主轴热变形实时测量

文章研究了高精度位移传感器在数控机床主轴热变形测量中的应用。考虑到数控机床主轴热变形在热误差研究中的重要性，文中利用基恩士公司生产的高精度CCD激光位移传感器和涡电流位移传感器，对数控机床主轴的热变形进行了实时测量。实验结果表明，所测立式铣床主轴热变形沿Y轴方向最大，在主轴转速5000r／min的条件下，约为41μm。     

Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor

Five-axis machine tools can be programmed to keep a constant nominal tool end point position while exercising all five axes simultaneously. This kinematic capability allows the use of a 3D proximity sensing head mounted at the spindle to track the position changes of a precision steel ball mounted on the machine table effectively measuring the 3D Cartesian volumetric errors of the machine. The new sensing head uses capacitive sensors to gather data on the fly during a synchronized five-axis motion which lasts less than 2 min. Because the measured volumetric errors are strongly affected by the link geometric errors, they can be used to estimate the link errors through an iterative procedure based on an identification Jacobian matrix. The paper presents the new sensor, the identification model and the experimental validation. The approach allows all eight link errors i.e. the three squarenesses of linear axes and the four orientations and center lines offset of the rotary axes to be estimated with the proposed single setup test. The estimation approach is performed on a horizontal five-axis machine tool. Then, using the estimated link errors, the volumetric errors are predicted for axes combinations different from those used for the identification process. The estimated machine model correctly predicts 52–84% of the volumetric errors for the tested trajectories.     

The development of a high-speed spindle measurement system using a laser diode and a quadrants sensor

Reducing the manufacturing time is the trend of precision manufacturing, and the precision of a work-piece is very important for manufacturing industry. High-speed cutting is becoming more widely used and the high-speed spindle is a very important element, whose precision may affect the overall performance of high-speed cutting. Most of the studies on high-speed cutting are focused on the cutting force, the vibration of the spindle and the effects of the spindle's thermal expansion; however, the measurement of the high-speed spindle continues to use the conventional spindle measurement method.As with the measurement of the high-speed spindle, more strict demands are set on the dynamic balance of cutting tools and the bandwidth of the measurement systems when compared with common spindles. The capacitance displacement sensor has been employed for the spindle error test. The precision of the measurement system is limited by the reference (such as a master ball or a master cylinder). Also the capacitance sensor and the reference must be grounded together. This paper presents a simple spindle measurement system using a laser diode and a quadrants sensor, with accuracy up to 1 μm, within 300,000 rpm for various spindles. The system does not need any reference and it is easy to set up. This system can be applied to measure the spindle errors, the spindle speed and the spindle indexing.