Nuclear energy system for the global environmental regulation in Korea— Energy-economy interaction model analysis

Global environmental regulation such as limits on CO₂ emissions will change the energy cost as well as energy mix, and it will eventually affect the potential economic growth and future energy demand. The rise of energy price from the environmental regulation will encourage the efficiency increase of energy use, fuel switching and the substitution between the energy and the other factors of production like labour and capital. Such situations can be successfully simulated through an energy-economy model which permits two-way interaction between energy and economy.

An analysis on the role of nuclear energy system for meeting the global environmental constraint like CO₂ emission regulation, has been performed through an energy-economy interaction model - EFOM-MACRO-KOREA.

In case carbon taxation which is a widely discussed policy measure for CO₂ abatement should be introduced, the role of nuclear energy in the domestic sustainable energy system as well as the economic impacts has been assessed. For the analysis, various scenarios in tax rate have been considered. Levying carbon tax will decrease future economic growth, and the decrease will be bigger in case that there are some restrictions on nuclear installation. It is shown that nuclear energy system will play an important role in Korean sustainable development up to 2040 in most cases.     

Reducing future CO2 emissions — The role of nuclear energy

A study was made to analyze the potential of reducing CO₂ emissions and to identify important energy and technology options in future energy systems of Japan. The energy market optimum allocation model MARKAL was used for the analysis with a time horizon from 1990 to 2050.

The analytical procedures were as follows. First, a reference energy system was established by incorporating all important energy sources, energy carriers, and energy technologies that existed already or that might be introduced during the above time horizon. Second, future demand for energy services was estimated based on the two economic growth scenarios, high and low. Also, assumptions were made about the evolution of imported fuel prices, availability of energy resources, and so on. Third, under the above assumptions, the optimum energy and technology options were selected by minimizing a discounted system cost under different carbon tax schemes, and thereby the potential of reducing CO₂ emissions was analyzed.

The following results were obtained by the analysis. Without utilization of nuclear energy, the CO₂ emissions can be hardly stabilized at the 1990 emission level even in the case of the low economic growth and large scale deployment of CO₂ recovery and disposal assumed. A significant amount of fossil fuels will be used for power generation in order to meet the rapidly growing demand for electricity. Nuclear energy, by substituting fossil fuels for electric power generation, is expected to contribute to the reduction of CO₂ emissions. In addition, the average cost of reducing the emissions will be substantially lowered compared with a non nuclear scenario.     

Roles of nuclear energy in Japan's future energy systems

The roles of nuclear energy in Japan's future energy systems were analyzed from the viewpoint of securing stable energy supply and reducing carbon dioxide (CO₂) emissions. The MARKAL model, developed in the Energy Technology Systems Analysis Programme (ETSAP) of the IEA, was used for establishing several energy scenarios with different assumptions on the availability of nuclear energy, natural gas, and a CO₂ disposal option. Nuclear energy was assumed to apply for synthetic fuel production as well as for conventional electric power generation. By comparing the CO₂ emission and system costs between these energy scenarios, following results were obtained. Without nuclear energy, the CO₂ emissions will hardly be reduced because of substantial increases in coal utilization. CO₂ disposal will be effective in reducing the emissions, however at much higher costs than the case with nuclear energy. The expansion of natural gas imports, if alone, will not reduce the emissions at enough low levels.     

Importance of nuclear generation in the struggles to reduce CO2 emission at Kansai Electric Power Co.

It has been pointed out in recent years that the potential impacts of global warming has been becoming more and more serious because of the rapid increase of anthropogenic CO₂ emission.

Japan's annual CO₂ emissions (fiscal 1994) amounted to 343 million tons of carbon. Although CO₂ emissions caused by fossil-fuel power generation accounted for 29.4% of total, on a sector basis, those directly from the energy conversion sector accounted for only 7.7%. Most CO₂ emissions (21.7% of total) resulted from electric power use in the industrial, commercial and domestic sectors. Thus, the reduction of CO₂ emissions caused by the use of electricity is a nationwide subject.

Understanding that both supply side and demand side approaches are necessary, Kansai Electric has been deploying “New ERA Strategy” as a comprehensive strategy to seek a potential for CO₂ reduction more broadly and deeply. Among a number of action items are the promotion of nuclear power generation, and improvement of overall energy efficiency, besides such demand side measures as leveling off the peak load.

The effectiveness of action items of the New ERA Strategy was evaluated in terms of CO₂ reduction. As a result, estimated CO₂ reduction related to nuclear power amounted to 88% of the total for fiscal 1995 in comparison with 1990, and that expected in 2000 is 84%. These results reconfirm that nuclear power is always the key to practical CO₂ reduction at present and in the future.

Comparison with candidate technology alternatives revealed that photovoltaic power generation needed 7 times greater rated capacity and 280 times larger area than nuclear power, so it is not realistic as a central power station alternative. The comparison also clarified that if wind power stations were constructed at all feasible sites in the Kansai region, they would not be a viable alternative to a single nuclear unit from CO₂ reduction viewpoint.     

The strategies of abating emission of CO2 and nuclear energy development in China

In China, annual coal consumption accounts for the first place all over the world in order to meet the high speed development of economy and improvement of the people's living quality. CO₂ emission from coal fire is a main contributor to the climate change. We must abate CO₂ emission besides developing economy for mitigating the global climate change. In the feasible countermeasure to reduce CO₂ emission, which includes improving energy efficiency and developing alternative energy, developing nuclear energy is an important one.     

Sustainable futures using nuclear energy

We present the role of nuclear energy in a sustainable future. This addresses the social, economic and environmental concerns of us all. Nuclear energy today avoids the emission of nearly two billion tonnes of greenhouse gases (GHGs) each year, thanks to over 400 reactors operating worldwide.

Nevertheless, there is no real recognition of real incentives for large-scale non-emitters like nuclear energy and for emissions avoidance in current Kyoto and other policies. These approaches rely heavily on conservation, renewables and efficiency. These measures alone also will not significantly reduce the atmospheric greenhouse burden, because the world is still growing. Also, our (the world's) future economic growth (in all countries) is tied to energy and electricity use. Our prosperity, the alleviation of poverty and the sustainability of the world depend on having a supply of emissions-free and safe energy.

Recent price hikes in fossil fuels and power blackouts also emphasize our need for reliable, safe and cheap power, as is offered by nuclear energy when coupled with effective and secure waste disposal.

A particularly important role for nuclear power in the future will be its links to the hydrogen economy. It is now recognised that the introduction of hydrogen into the transportation sector will benefit the environment only when low carbon sources, such as nuclear reactors, are the primary energy source for hydrogen production. The future could well be the Hydrogen Age. We show that a major reduction in GHGs worldwide can be obtained by nuclear-electric production of hydrogen, thus alleviating their potential effects on future generations. We also demonstrate a potential key synergism with renewable wind power in the hybrid production of distributed hydrogen. Thus, nuclear energy supports and enables the World in its journey to a sustainable, safe and secure energy future.     

The role of nuclear energy in 21st century for sustainable development in Korea

With the growing international consensus concerning the harmful health and environmental impact of fossil energy use, there is on the political level recognition of nuclear power's potential role in delivering large quantities of energy without releasing common environmental pollutants and greenhouse gases. The energy consumption in Korea has greatly increased with rapid economic growth and industrialization since 1970. The average annual growth rate was 8% in 1970s and more than 10% in 1980s and 1990s except during the '98 financial crisis.

Due to the lack of domestic energy resource bases, the rapid economic growth and industrialization has to be supported by the imported energy. Thus, the imported energy dependence of total energy supply has rapidly increased from 47.5% in 1970 to 97.5% in 1997. The fossil fuels share of energy consumption grew up to 88.2% in 1997. This resulted to CO2 emission of 140 million ton-C, which account for 1.8% of world greenhouse gases emission. (MOCIE, 2000) Because of rapid industrialization, Korea has relatively higher energy intensive industries compared to most of the developed countries with 3.1 ton-C/capita and 0.49 ton-C/million Won.

Thus, energy policy is being focused on the improvement of energy efficiency and optimum energy mix for the reduction of GHGs. At present, 16 units of Nuclear Power Plant are in operation, 6 units under construction. The nuclear share of electric power generation was 43% last year. This share will be increased up to more than 50% by 2015. In order to meet voluntary GHGs emission target, a drastic switching to non-carbon energy bases would be necessary.     

Enhanced CO2 decomposition via metallic foamed electrode packed in self-cooling DBD plasma device

A self-cooling dielectric barrier discharge reactor, packed with foamed Cu and Ni mesh and operated at ambient conditions, was used for the composition of CO₂ into CO and O₂. The influences of power, frequency, and other discharge characteristics were investigated in order to have a better understanding of the effect of the packing materials on CO₂ decomposition. It is found that porous foamed Cu and Ni not only played a role as the carrier of energy transformation and electrode distributed in discharge gaps but also promoted the equilibrium shifting toward the product side to yield more CO by consuming some part of O₂ and O radicals generated from the decomposition of CO₂. The maximum CO₂ decomposition rates of 48.6% and 49.2% and the maximum energy efficiency of 9.71% and 10.18% were obtained in the foamed Ni and Cu mesh, respectively.     

Nuclear energy option for energy security and sustainable development in India

India is facing great challenges in its economic development due to the impact on climate change. Energy is the important driver of economy. At present Indian energy sector is dominated by fossil fuel. Due to international pressure for green house gas reduction in atmosphere there is a need of clean energy supply for energy security and sustainable development. The nuclear energy is a sustainable solution in this context to overcome the environmental problem due to fossil fuel electricity generation. This paper examines the implications of penetration of nuclear energy in Indian power sector. Four scenarios, including base case scenario, have been developed using MARKAL energy modeling software for Indian power sector. The least-cost solution of energy mix has been measured. The result shows that more than 50% of the electricity market will be captured by nuclear energy in the year 2045. This ambitious goal can be expected to be achieved due to Indo-US nuclear deal. The advanced nuclear energy with conservation potential scenario shows that huge amounts of CO₂ can be reduced in the year 2045 with respect to the business as usual scenario.     

Development of medium and small sized reactors: DMS

Nuclear power is expected to become the main source for electric power generation in Japan for the reasons of energy security and prevention of CO₂ emission. In addition, the slowdown of recent electric power demand and the liberalization of the electric power market are accelerating medium and small sized reactor development. (Hida and Ito, 2003) Furthermore, the needs of medium and small sized reactors have become greater in foreign countries where electric grid systems are weak. Under these circumstances, Hitachi has developed DMS's (Double MS: Modular Simplified & Medium Small Reactors) as 400 MWe class LWR's supported by The Japan Atomic Power Company. (Moriya et al., 2003) In addition, DMS's have been designed based on proven technology that requires no large-scale development, and can therefore be introduced in the market in near future.     

Futures for hydrogen produced using nuclear energy

What is the future of hydrogen (H₂) produced from nuclear energy? Assuming that economically competitive nuclear H₂ can be produced, production of H₂ may become the primary use of nuclear energy and the basis for both a nuclear-H₂ renewable (solar, wind, etc.) energy economy and a nuclear-H₂ transport system. The technical and economic bases for these conclusions are described. In a nuclear-H₂ renewable energy economy, nuclear energy is used to produce H₂ that is stored and becomes the energy-storage component of the electrical generating system. The stored H₂ replaces piles of coal and tanks of liquid fuel. Capital-intensive renewable energy sources and nuclear reactors produce electricity at their full capacity. The stored H₂ is used in fuel cells to produce the highly variable quantities of electricity needed to fill the gap between the electricity demand by the customer and the electricity generated by the rest of the electrical generating system. Hydrogen is also used to produce the liquid or gaseous transport fuels. This energy-system architecture is a consequence of the fundamental differences between the characteristics of electricity (movement of electrons) and those of H₂ (movement of atoms). Electricity can be generated, transformed, and used economically on either a small or a large scale. However, it is difficult to generate, store, and transform H₂ economically on a small scale. This distinction favors the use of large-scale nuclear systems for H₂ production.     

CO_2 conversion by thermal plasma with carbon as reducing agent: high CO yield and energy efficiency

A key problem in CO_2 conversion by thermal plasma is suppressing the inverse reactions,CO?+?O?→?CO_2 and CO?+?0.5O_2?→?CO_2, to simultaneously obtain high CO yield and energy efficiency. This can be done by quickly quenching the decomposed gas or rapidly taking away free oxygen from decomposed gas. In this paper, experiments of CO_2 conversion by thermal plasma with carbon as a reducing agent are presented. Carbon quickly devoured free oxygen in thermal plasma decomposed gas, and not only is the inverse reaction completely suppressed, but the discharge energy to form oxygen atoms, oxygen molecular, and thermal energy is also reused.A CO_2 conversion rate of 67%–94% and the corresponding electric energy efficiency of about 70% are achieved, both are much higher than that seen so far by other plasma implementations.     

Radiation shielding design of the CFETR polarimeter interferometer and CO2 dispersion interferometer

A three-wave based laser polarimeter/interferometer and a CO₂ laser dispersion interferometer are used to determine the electron and current density profiles on a Chinese fusion engineering test reactor (CFETR). Radiation shielding is designed for the combination of polarimeter/interferometer and CO₂ dispersion interferometer. Furthermore, neutronics models of the two systems are developed based on the engineering-integrated design of CFETR polarimeter/interferometer and CO₂ dispersion interferometer and the major material components of CFETR. The polarimeter/interferometer and CO₂ dispersion interferometer's neutron and photon transport simulations were performed using the Monte Carlo neutral transport code to determine the energy deposition and neutron energy spectrum of the optical mirrors. The energy depositions of the first mirrors on the polarimeter/interferometer are reduced by three orders with the whole shielding. Since the mirrors of CO₂ dispersion interferometer are very close to the diagnostic first wall, shielding space is limited and the CO₂ dispersion interferometer energy deposition is higher than that of the polarimeter/interferometer. The dose rate after shutdown 10⁶ s in the back-drawer structure has been estimated to be 83 μSv h⁻¹ when the radiation shield is filled in the diagnostic shielding modules, which is below the design threshold of 100 μSv h⁻¹. Radiation shielding design plays a key role in successfully applying polarimeter/interferometer and CO₂ dispersive interferometer in CFETR.     

Utilization of solar and nuclear energy for hydrogen production

Although the world-wide energy supply situation appears to have eased at present, non-fossil primary energy sources and hydrogen as a secondary energy carrier will have to take over a long-term and increasing portion of the energy supply system. The only non-fossil energy sources which are available in relevant quantities, are nuclear energy, solar energy and hydropower. The potential of H₂ for the extensive utilization of solar energy is of particular importance. Status, progress and development potential of the electrolytic H₂ production with photovoltaic generators, solar-thermal power plants and nuclear power plants are studied and discussed. The joint German-Saudi Arabian Research, Development and Demonstration Program HYSOLAR for the solar hydrogen production and utilization is summarized.     

Numerical investigation on electron effects in the mass transfer of the plasma species in aqueous solution

The objective of this work is to contribute an understanding of the effects of electrons in the plasmas on the mass transfer of plasma species in aqueous solution by means of the numerical simulation based on a one-dimensional diffusion-reaction model. The plasma species are divided into two groups, i.e. electrons and the other species, and the mass transfer in the three scenarios has been simulated, including the systematic calculations of the depth distributions of five major reactive species, OH, O₃, HO₂ , O₂^-, and H₂O₂ . In the three scenarios, the particles considered to enter into aqueous solution are all the plasma species (the scenario I, where the mass transfer of plasma species is a result due to the synergy of the electrons and the other plasma species), the other species (the scenario II), and only electrons in plasma species (the scenario III), respectively. The detailed analyses on the difference between the depth distributions of each reactive species in these three scenarios show the following conclusions. The electrons play an important role in the mass transfer of plasma species in aqueous solution and the synergy of the electrons and the other plasma species (the electron-species synergy) presents its different effects on the mass transfer. The vast majority of H₂O₂ are generated from a series of the electron- related reactions in aqueous solution, which is hardly affected by the electron-species synergy. Compared to the results when only the electrons enter into the liquid region, the electron-species synergy evidently weakens the generation of O₂^-, O₃ , and OH, but promotes to produce HO₂ .     

Plasma-assisted Ru/Zr-MOF catalyst for hydrogenation of CO2 to methane

As an important type of metal–organic framework (MOF), Zr-MOF shows excellent CO₂ adsorption performance. In this work, a Zr-MOF was synthesized by a solvothermal method and adopted to support Ru through simple incipient-wetness impregnation. Then the Ru/Zr-MOF was applied for CO₂ hydrogenation (V_H2 : V_CO2= 4:1) with the assistance of dielectric barrier discharge (DBD) plasma. The hydrogenation of CO₂ results showed that methane was produced selectively under the synergistic effect between plasma and the Ru/Zr-MOF catalyst, and the selectivity and yield of methane reached 94.6% and 39.1%, respectively. The XRD and SEM analyses indicate that the basic crystalline phase structure and morphology of the Zr-MOF and Ru/Zr-MOF remained the same after DBD plasma treatment, suggesting that the catalysts are stable in plasma. The guest molecules in the pores of the Zr-MOF are removed and the Ru³⁺ ions are reduced to metallic Ru⁰ in the reduction atmosphere according to the BET and XPS results, which are responsible for the high performance of plasma with the Ru/Zr-MOF catalyst. In situ optical emission spectra of pure plasma, plasma with Zr-MOF, and plasma with Ru/Zr-MOF were measured, and the active species of C, H and CH for CO₂ hydrogenation were detected. The plasma-assisted Ru/Zr-MOF exhibited high catalytic activity and stability in CO₂ hydrogenation to methane, and it has great guiding significance for CO₂ hydrogenation by using plasma and MOF materials.     

Time-Resolved Optical Emission Spectroscopy Diagnosis of CO2 Laser-Produced SnO2 Plasma

The spectral emission and plasma parameters of SnO_2 plasmas have been investigated.A planar ceramic SnO_2 target was irradiated by a CO2 laser with a full width at half maximum of 80 ns.The temporal behavior of the specific emission lines from the SnO_2 plasma was characterized.The intensities of Sn I and Sn II lines first increased,and then decreased with the delay time.The results also showed a faster decay of Sn I atoms than that of Sn II ionic species.The temporal evolutions of the SnO_2 plasma parameters(electron temperature and density) were deduced.The measured temperature and density of SnO_2 plasma are 4.38 eV to0.5 eV and 11.38×10~(17) cm~(-3) to 1.1×10~(17) cm~(-3),for delay times between 0.1 μs and 2.2 μs.We also investigated the effect of the laser pulse energy on SnO_2 plasma.     

Study of steam, helium and supercritical CO2 turbine power generations in prototype fusion power reactor

Power generation systems such as steam turbine cycle, helium turbine cycle and supercritical CO₂ (S-CO₂) turbine cycle are examined for the prototype nuclear fusion reactor. Their achievable cycle thermal efficiencies are revealed to be 40%, 34% and 42% levels for the heat source outlet coolant temperature of 480 °C, respectively, if no other restriction is imposed. In the current technology, however, low temperature divertor heat source is included. In this actual case, the steam turbine system and the S-CO₂ turbine system were compared in the light of cycle efficiency and plant cost. The values of cycle efficiency were 37.7% and 36.4% for the steam cycle and S-CO₂ cycle, respectively. The construction cost was estimated by means of component volume. The volume became 16,590 m³ and 7240 m³ for the steam turbine system and S-CO₂ turbine system, respectively. In addition, separation of permeated tritium from the coolant is much easier in S-CO₂ than in H₂O. Therefore, the S-CO₂ turbine system is recommended to the fusion reactor system than the steam turbine system.     

The comprehensive nuclear promotion plan of the Republic of Korea

Access to economic and sustainable energy is essential in every country. Rep. of Korea has insufficient supply of energy resource. Accordingly, Rep. of Korea has considered nuclear energy as the main energy source since 1970’s oil crises. In 1994, Rep. of Korea declared “Direction to Long-term Nuclear Energy Policy towards the Year 2030” and revised the Atomic Energy Act to promote the safe and peaceful use of nuclear energy.According to this Act, the government made the CNEPP (comprehensive nuclear energy promotion plan) for every 5 years since 1997. This CNEPP shall include the analysis of current status and prospect, policy targets, implementation tasks, plan to invest, and other matters for the nuclear utilization and safety. National nuclear technology has advanced a lot by 1st (1997–2001), 2nd (2002–2007), and 3rd CNEPP (2007–2011). Through these previous plans, Rep. of Korea designed its own nuclear reactor, Korea Standard Nuclear Power Plant (KSNP) and became the fifth nuclear reactor exporter after the United States, France, Russia and Canada.The Rep. of Korea has been preparing for the 4th CNEPP to advance further stage and to harmonize with the long-term policy direction. In this study, detailed process of the establishment of the 4th CNEPP was analyzed. By the analysis of the domestic and international environmental change, the achievement of the 3rd CNEPP and the major issue of the 4th CNEPP were proposed. Six promotion areas were set in the 4th CNEPP as nuclear utilization, sustainability, export/growth force, radiation, safety/public acceptance, and infra/international cooperation. It will be discussed by various social, economic, political, cultural, and technical professionals to harmonize with the national vision for the future, short- and long-term plans. By doing this, it will help to improve the nuclear safety, transparency, and effectiveness in the promotion of national nuclear technology.     

Role of nuclear energy in environment, economy, and energy issues of the 21st century – Growing energy demand in Asia and role of nuclear

The economic growth of recent Asia is rapid, and the GDP and the energy consumption growth rate are about 8–10% in China and India. The energy consumption forecast of Asia in this century was estimated based on the GDP growth rate by Goldman Sachs. As a result, about twice in India and Association of South East Asian Nations (ASEAN) and about 1.5 times in China of SRES B (Special Report on Emission Scenarios) are forecasted. The simulation was done by Grape Code to analyze the impact of energy increase in Asia. As for the nuclear plant in Asia, it is expected 1500 GWe in 2050 and 2000 GWe in 2100, in the case of the environmental constrain. To achieve this nuclear utilization, there are two important aspects, technically and institutionally.

A. Development of the CANDLE core and/or the Breed and Burn core.

B. The establishment of the stable nuclear fuel supply system like “Asian nuclear fuel supply organization”.