Color-tunable properties based on complex anion substitution in Eu2+ doped Ca8Sc2(PO4)6-y(SiO4)1+y phosphor

We synthesized and investigated the effect of Eu²⁺ ions doping in a novel phosphor-silicate Ca₈Sc₂(PO₄)₆(SiO₄) phosphor. The structure and photoluminescence properties were determined by X-ray powder diffraction Rietveld refinement, diffuse reflection spectra, emission-excitation spectra, decay curves and temperature dependence spectra. The phosphors showed an asymmetric broad-band blue emission (Eu²⁺) with peak at 470?nm. Furthermore, we presented the Ca_7.96Sc₂(PO₄)_6-y(SiO₄)_1+y:0.04Eu²⁺ phosphors by co-substituting [Eu²⁺-Si⁴⁺] for [Ca²⁺-P⁵⁺], and different behaviors of luminescence evolution in response to structural variation were verified among the series of phosphors. The results were attributed to the presence of multi Ca²⁺ sites, resulting in the mixing of blue and green emissions for Eu²⁺ ions. The complex anion substitution of [PO₄]^3- by [SiO₄]^4- induced an increased crystal field splitting of the Eu²⁺ ions, which caused a decrease in emission energy from the 5d excited state to the 4f ground state and a resultant red-shift from 470?nm to 520?nm. All the properties indicated that the Ca₈Sc₂(PO₄)₆(SiO₄):Eu²⁺ phosphors have potential application for color-tunable WLEDs.     

Luminescent properties and energy transfer mechanism of NaGd(MoO4)2:Sm3+, Eu3+ phosphors

Sm³⁺ singly doped NaGd(MoO₄)₂ and Sm³⁺, Eu³⁺ co-doped NaGd(MoO₄)₂ phosphors by using sodium citrate as chelating agent were synthesized via hydrothermal method. The structure and morphology were characterized by means of X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). During the synthesis process, the Na₃Cit concentration plays a crucial role in determining the morphology and particle size of the products. The optimal doping concentration in Sm³⁺ singly doped NaGd(MoO₄)₂ phosphor was confirmed. The relevant parameters of energy transfer in the NaGd(MoO₄)₂: Sm³⁺, Eu³⁺ phosphors have been calculated based on the fluorescent dynamic analysis. Finally, on the analysis of luminescent spectra and fluorescent dynamics, the main energy transfer mechanism between Sm³⁺ and Eu³⁺ in NaGd(MoO₄)₂ phosphor is confirmed to be electric dipole-dipole interaction, and energy transfer pathway is from ⁴G_5/2 state of Sm³⁺ to ⁵D₀ state of Eu³⁺ rather than ⁵D₁ of Eu³⁺ ions.     

First observation of 5DJ (J=1, 2, 3) emission transitions in Eu3+-activated rare-earth antimony garnet R3Sb5O12 (R=Y,Gd, La)

R_2.9Eu_0.1Sb₅O₁₂ (R=Y, Gd, La) polycrystalline powders were prepared by solid-state reaction and characterized by X-ray powder diffraction (XRD), photoluminescence, decay lifetimes, and CIE color coordinates. The phosphors can be efficiently excited by UV-light and presents the emission covering the entire visible spectrum. Except for the commonly reported ⁵D₀–⁷F_0,1,2,3,4 transitions of Eu³⁺ ions in R_2.9Eu_0.1Sb₅O₁₂ (R=Y, La), higher ⁵D_1,2,3 states present stronger emission lines. This produces white emission in the single-phased phosphor, whereas R_2.9Eu_0.1Sb₅O₁₂ (R=Gd) shows orange emission due to the absence of ⁵D_3,2 transitions. The emission mechanism from the high-energy levels of ⁵D_1,2,3 Eu³⁺ ion in R_2.9Eu_0.1Sb₅O₁₂ (R=Y, Gd, La) phosphors is also discussed.     

Garnet-based red emitting phosphors Li6MLa2Nb2O12: Eu (M=Ca,Sr, Ba): Photoluminescence improvement by changing crystal lattice

A series of novel red emitting phosphors Li₆M(La_1−xEu_x)₂Nb₂O₁₂ (M=Ca, Sr, Ba; 0≤x≤0.3) were synthesized by solid state reaction, and their structures and photoluminescence properties were investigated in detail. The excitation spectrum of Li₆M(La_1−xEu_x)₂Nb₂O₁₂ revealed two mainly excitation bands at 393 nm and 464 nm, which match well with the two popular emissions from near-UV and blue LED chips. Upon the 464 nm light excitation, Li₆MLa₂Nb₂O₁₂:Eu³⁺ phosphors exhibit a red emission centered at 608 nm, originated from the ⁵D₀–⁷F₂ transition of Eu³⁺ ions. The Eu³⁺ surrounding crystal lattice environment in the garnet-based host was changed by altering the c sites element with different radii alkaline earth Ba, Sr, and Ca. The evident photoluminescence enhancement was observed in Li₆M(La_1−xEu_x)₂Nb₂O₁₂ phosphors with the decreasing of the c sites ionic radius. The emission intensity of the optimized Li₆Ca(La_0.8Eu_0.2)₂Nb₂O₁₂ (λ_exc=464 nm) phosphor is about two times higher than that of Y₂O₃:Eu³⁺ (λ_exc=467 nm) under blue light excitation. In addition, the quenching mechanism and the relationship between the structure and photoluminescence property were also discussed.     

The doping concentration dependent tunable yellow luminescence of Sr5(PO4)2(SiO4):Eu

Color tunable yellow-emitting phosphors of Sr_5−5xEu_5x(PO₄)₂SiO₄ (x = 0.05-0.15) were prepared by conventional solid-state reaction method. The X-ray powder diffraction patterns, the photoluminescence excitation and emission spectra were measured. The main excitation bands of the phosphors locate at a broad band extending from 300 to 500 nm, which can match the emission of ultraviolet- and blue-emitting diode chips. The tunable luminescence color was realized by the changing Eu²⁺ doping in Sr₅(PO₄)₂SiO₄. The structure and luminescence properties were investigated. Sr_5−5x(PO₄)₂SiO₄:Eu_5x displays two typical luminescence centers, which originate from two different Sr²⁺ (Eu²⁺) sites in the host. The site-occupation, the luminescence intensity and energy transfer between the Eu²⁺ ions occupying two different crystallographic Sr²⁺ sites were discussed on the base of the luminescence spectra and crystal structure. This is helpful to improve this phosphor for a potential application as a white light emitting diode phosphor.     

A reddish orange stoichiometric phosphor LiEu(PO3)4 for white light-emitting diodes

Stoichiometric phosphors LiGd_1−xEu_x(PO₃)₄(x=0, 0.2, 0.4, 0.6, 0.8, 1.0) were synthesized via traditional solid state reactions. The X-ray powder diffraction measurements show that all prepared samples are isostructural with LiNd(PO₃)₄. Eu³⁺ doped phosphors can emit intense reddish orange light under the excitation of near ultraviolet light from 370 to 410 nm. The strongest two at 591 and 613 nm can be attributed to the transitions from excited state ⁵D₀ to ground states ⁷F₁ and ⁷F₂, respectively. The typical chromaticity coordinates (x=0.620, y=0.368) of Eu³⁺ doped phosphors are in red area. The recorded absorbance spectra indicate that there is effective absorbance in the near UV region for all Eu³⁺ doped samples. Present research indicates that LiGd_1–xEu_x(PO₃)₄ is a promising phosphor for white light-emitting diodes.     

Red,green and blue-violet emission coexistence in white-light-emitting Ca3SiO4Cl2:Bi3+, Li+, Eu2+, Eu3+ phosphor

A series of emission-tunable Ca₃SiO₄Cl₂:Bi³⁺, Li⁺, Euⁿ⁺(n =2, 3) (CSC:Bi³⁺, Li⁺, Euⁿ⁺) phosphors have been synthesized via sol-gel method. The X-ray diffraction results indicate that the as-synthesized phosphors crystallize in a low temperature phase with the space group of P21/c. Energy transfer from Bi³⁺ to Eu³⁺/Eu²⁺ exists in CSC:Bi³⁺, Li⁺, Euⁿ⁺ phosphors. Under the excitation of 327 or 365 nm, the Ca_2.98−ySiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, yEuⁿ⁺(y=0.0001–0.002) phosphors show an intense green emission band around 505 nm, while under the excitation of 264 nm, three emission bands centered around 396 nm (Bi³⁺), 505 nm (Eu²⁺) and 614 nm (Eu³⁺) are observed and tunable colors from blue-violet to green or white are achieved in these phosphors by varying the content of Eu. White-light emission with the color coordinate (0.312, 0.328) is obtained in Ca_2.978SiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, 0.002Euⁿ⁺(n =2, 3). Based on these results, the as-prepared CSC:Bi³⁺, Li⁺, Eu²⁺, Eu³⁺ phosphors can act as color-tunable and single-phase white emission phosphors for potential applications in UV-excited white LEDs.     

Tunable color emission in LaScO3:Bi3+,Tb3+,Eu3+ phosphor

LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ (x = 0 − 0.04, y = 0 − 0.05, z = 0 − 0.05) phosphors were prepared via high-temperature solid-state reaction. Phase identification and crystal structures of the LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors were investigated by X-ray diffraction (XRD). Crystal structure of phosphors was analyzed by Rietveld refinement and transmission electron microscopy (TEM). The luminescent performance of these trichromatic phosphors is investigated by diffuse reflection spectra and photoluminescence. The phenomenon of energy transfer from Bi³⁺ and Tb³⁺ to Eu³⁺ in LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors was investigated. By changing the ratio of x, y, and z, trichromatic can be obtained in the LaScO₃ host, including red, green, and blue emission with peak centered at 613, 544, and 428 nm, respectively. Therefore, two kinds of white light-emitting phosphors were obtained, LaScO₃:0.02Bi³⁺,0.05Tb³⁺,zEu³⁺ and LaScO₃:0.02Bi³⁺,0.03Eu³⁺,yTb³⁺. The energy transfer was characterized by decay times of the LaScO₃:xBi³⁺, yTb³⁺, zEu³⁺ phosphors. Moreover absolute internal QY and CIE chromatic coordinates are shown. The potential optical thermometry application of LaScO₃:Bi³⁺,Eu³⁺ was based on the temperature sensitivity of the fluorescence intensity ratio (FIR). The maximum S_a and S_r are 0.118 K⁻¹ (at 473.15 K) and 0.795% K⁻¹ (at 448.15 K), respectively. Hence, the LaScO₃:Bi³⁺,Eu³⁺ phosphor is a good material for optical temperature sensing.     

Luminescence properties of Ca2GdNbO6: Sm3+, Eu3+ red phosphors with high quantum yield and excellent thermal stability for WLEDs

A series of Ca₂GdNbO₆: xSm³⁺ (0.01 ≤ x ≤ 0.15) and Ca₂GdNbO₆: 0.03Sm³⁺, yEu³⁺ (0.05 ≤ y ≤ 0.3) phosphors were synthesized by the traditional solid-state sintering process. XRD and the corresponding refinement results indicate that both Sm³⁺ and Eu³⁺ ions are doped successfully into the lattice of Ca₂GdNbO₆. The micro-morphology shows that the elements of Ca₂GdNbO₆: 0.03Sm³⁺, 0.2Eu³⁺ phosphor are evenly distributed in the sample, and the particle size is about 2 μm. The optical properties and fluorescence lifetime of Ca₂GdNbO₆: 0.03Sm³⁺, Eu³⁺ phosphors were detailedly studied. The emission peak at ⁵D₀→⁷F₂ (614 nm) is the strongest and emits red light under 406 nm excitation. The increase of Eu³⁺ concentration causes the energy transfers from Sm³⁺ to Eu³⁺ ions, and the transfer efficiency reaches 28.6%. Ca₂GdNbO₆: 0.03Sm³⁺, 0.2Eu³⁺ phosphor has a quantum yield of about 82.7%, and thermal quenching activation energy is of 0.312 eV. The color coordinate (0.646, 0.352) of Ca₂GdNbO₆: 0.03Sm³⁺, 0.2Eu³⁺ phosphors is located in the red area. The LED device fabricated based on the above phosphor emit bright white light, and CCT = 5400 K, Ra = 92.8. The results present that Ca₂GdNbO₆: 0.03Sm³⁺, Eu³⁺ phosphors potentially find use in the future.     

Multicolour tunable luminescence of thermal-stable Ce3+/Tb3+/Eu3+-triactivated Ca3Gd(GaO)3(BO3)4 phosphors via Ce3+ → Tb3+ → Eu3+ energy transfer for near-UV WLEDs applications

A series of single-component blue, green and red phosphors have been fabricated based on the Ca₃Gd(GaO)₃(BO₃)₄ host through doping of the Ce³⁺/Tb³⁺/Eu³⁺ ions, and their crystal structure and photoluminescence properties have been discussed in detail. A terbium bridge model via Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer has been studied. The emission colours of the phosphors can be tuned from blue (0.1661, 0.0686) to green (0.3263, 0.4791) and eventually to red (0.5284, 0.4040) under a single 344 nm UV excitation as the result of the Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer. The energy transfer mechanisms of Ce³⁺ → Tb³⁺ and Tb³⁺ → Eu³⁺ were found to be dipole-dipole interactions. Importantly, Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors had high internal quantum efficiency. Moreover, the study on the temperature-dependent emission spectra revealed that the Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors possessed good thermal stability. The above results indicate that the phosphors can be applied into white light-emitting diodes as single-component multi-colour phosphors.     

Synthesis and photoluminescence enhancement of Ca3Sr3(VO4)4:Eu3+ red phosphors by co-doping with La3+

In this study, a series of red-emitting Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphors co-doped with La³⁺ was prepared using the combustion method. The microstructures, morphologies, and photoluminescence properties of the phosphors were investigated. All Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ samples synthesized at temperatures greater than 700 ℃ exhibited the same standard rhombohedral structure of Ca₃Sr₃(VO₄)₄. Furthermore, the Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ phosphor was effectively excited by near-ultraviolet light of 393 nm and blue light of 464 nm. The strong excitation peak at 464 nm corresponded to the ⁷F₀→⁵D₂ electron transition of Eu³⁺. The strong emission peak observed at 619 nm corresponded to the ⁵D₀→⁷F₂ electron transition of Eu³⁺. Co-doping with La³⁺ significantly improved the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺ red phosphors. The optimum luminescence of the phosphor was observed at Eu³⁺ and La³⁺ concentrations of 5% and 6%, respectively. Moreover, co-doping with La³⁺ also improved the fluorescence lifetime and thermal stability of the Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphor. The CIE chromaticity coordinate of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ was closer to the NTSC standard for red phosphors than those of other commercial phosphors; moreover, it had greater color purity than that of all the samples tested. The red emission intensity of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ at 619 nm was ~1.53 times that of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺ and 2.63 times that of SrS:Eu²⁺. The introduction of charge compensators could further increase the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ red phosphors. The phosphors synthesized herein are promising red-emitting phosphors for applications in white light-emitting diodes under irradiation by blue chips.     

Red-emitting enhancement of Bi4Si3O12:Sm3+ phosphor by Pr3+ co-doping for White LEDs application

In this account, Bi₄Si₃O₁₂:Sm³⁺ and (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) red phosphors were prepared by solution combustion method fueled by citric acid at 900 °C for 1 h. The effects of co-doping Pr³⁺ ions on red emission properties of Bi₄Si₃O₁₂:Sm³⁺ phosphors, as well as the mechanism of interaction between Sm³⁺ and Pr³⁺ ions were investigated by various methods. X-ray diffraction (XRD) and Scanning electron microscopy (SEM) revealed that smaller amounts of doped rare earth ions did not change the crystal structure and particle morphology of the phosphors. The photoluminescence spectroscopy (PL) indicated that shape and position of the emission peaks of (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors excited at λ_ex=403 nm were similar to those of Bi₄Si₃O₁₂:Sm³⁺ phosphors. The strongest emission peak was recorded at 607 nm, which was attributed to the ⁴G_5/2→⁶H_7/2 transition of the Sm³⁺ ion. The photoluminescence intensities of Bi₄Si₃O₁₂:Sm³⁺ phosphors were significantly improved by co-doping with Pr³⁺ ions and were maximized at Sm³⁺ and Pr³⁺ ions doping concentrations of 4 mol% and 0.1 mol%, respectively. The characteristic peaks of Sm³⁺ ions were displayed in the emission spectra of (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors excited at respectively λ_ex=443 nm and λ_ex=481 nm (Pr:³H₄→³P₂, ³H₄→³P₀). This indicated the existence of Pr³⁺→Sm³⁺ energy transfer in (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors.     

Synthesis and photoluminescence properties of Eu doped Sr9Sc(PO4)7 phosphors for white light-emitting diodes

A series of Eu²⁺-activated Sr₉Sc(PO₄)₇ yellowish-green emitting phosphors were synthesized by conventional solid-state reaction. The photoluminescence (PL) properties and concentration quenching mechanism of the as-prepared phosphors were investigated. The emission spectrum exhibits a broad and asymmetric band peaking at 510 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The excitation spectrum exhibits a broad band extending from 250 to 450 nm, which matches well with the emission of near ultraviolet (n-UV) chips (350–430 nm). Non-radiative transitions between Eu²⁺ ions in the Sr₉Sc(PO₄)₇ host have been demonstrated to be attributable to dipole–dipole interactions, and the critical distance was calculated to be 23.1 Å. These results indicate that Sr₉Sc(PO₄)₇:Eu²⁺ phosphor could serve as a promising candidate for application in n-UV white-light LEDs.     

Effect of sintering atmosphere and lithium ion co-doping on photoluminescence properties of NaCaPO4:Eu phosphor

This paper reports on the photoluminescence properties of Na_1−yLi_yCa_1−xPO₄:_xEu²⁺ phosphors synthesized by a solid state reaction method. The prepared phosphors have been thoroughly characterized by means of X-ray diffraction (XRD), Field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectrum (FTIR), Raman spectrum, Thermo gravimetric and differential thermal analysis (TG–DTA) and photoluminescent spectral measurements. The structure of Na_1−yLi_yCa_1−xPO_4:xEu²⁺ phosphors were found to be orthorhombic in nature with a sphere-like morphology and having the particle size in micrometer range. The excitation spectra of NaCaPO₄:Eu²⁺ phosphors revealed a broad excitation band having its maximum intensity at 373 nm and ranging from 250 m to 450 nm. Incidentally, it matches well with the ultraviolet (UV) radiation of light-emitting diodes (LEDs). Upon 373 nm excitation, these phosphors exhibited intense bluish-green emission band centered at 505 nm. The effect of sintering atmospheres and co-doping of lithium ions on the photoluminescence properties of the NaCaPO₄:Eu²⁺ phosphors were studied and explained suitably. The obtained results indicate that the prepared NaCaPO₄:Eu²⁺ phosphors are promising bluish-green candidates for the phosphor-converted white LED applications.     

A novel single-phase Na3.6Y1.8(PO4)3:Bi3+,Eu3+ phosphor for tunable and white light emission

A new type of Bi³⁺,Eu³⁺ single- and co-doped Na_3.6Y_1.8(PO₄)₃ phosphate phosphors were manufactured using conventional high-temperature solid-state reaction technique to explore their application for solid-state lighting. The crystal structure, luminescent properties, luminescent mechanism and quantum efficiency were thoroughly explored. Results show that there are two crystallization sites for Bi³⁺ and Eu³⁺ ions. Upon the excitation of 342 and 373 nm, Bi³⁺ single-doped phosphors exhibit green and blue emission, derived from the ³P₁ to ¹S₀ transition of Bi³⁺ located in different occupancy sites. Thanks to radiative energy transfer process from Bi³⁺ to Eu³⁺, adjustable emission could be acquired by altering Eu³⁺ content in co-doped phosphors. Pure white-light emission with quantum efficiency value of 22.9% can be realized in Na_3.6Y_1.8(PO₄)₃:0.01Bi³⁺,0.1Eu³⁺ sample and the integrated intensity of white light emission at 417 K remains 85% of that at room temperature. Our results indicate that Na_3.6Y_1.8(PO₄)₃:Bi³⁺,Eu³⁺ phosphors have feasible application in high-power ultraviolet driven solid-state lighting.     

Fluorescence improvement of Ba1.3Ca0.7SiO4:Eu,Mn phosphors via Dy addition and their color-tunable properties

A series of novel single-phase white phosphors Ba_1.3Ca_0.69−x−ySiO₄:0.01Eu²⁺,xMn²⁺, yDy³⁺ were synthesized by the solid-state method. The excitation spectra of these phosphors exhibit a broad band in the range of 260–410 nm, which can meet the application requirements for near-UV LED chips (excited at 350–410 nm). The emission spectra consist of two broad bands positioned around 455 nm and 596 nm, which are assigned to 5d→4f transition of Eu²⁺, and ⁴T₁→⁶A₁ transition of Mn²⁺, respectively. The luminescence intensity of phosphors enhances obviously by doping Dy³⁺ ions, and the intensity of two bands reaches an optimum when Dy³⁺ amounts to 2 mol%. In addition, thermoluminescence investigation of phosphor was conducted, getting two shallow trap defects with activation energy of 0.43 eV and 0.45 eV, which demonstrates the energy transfer mechanism of Dy–Eu through the process of hole and electron traps. By precisely tuning the Mn²⁺ content, an optimized white light with color rendering index (CRI) of R_a=84.3%, correlated color temperature (CCT) of T_c=8416 K and CIE chromaticity coordinates of (0.2941, 0.2937) is generated. The phosphor could be a potential white phosphors for near-UV light emitting diodes.     

Tuning of Bi3+-related excitation and emission positions through crystal field modulation in the perovskite-structured La2(Znx, Mg1-x)TiO6 (0 ≤ x ≤ 1):Bi3+ solid solution for white LEDs

In the past year, emission-tunable crystals based on the rare-earth (RE) ions as luminescent center have been frequently reported for use in UV and blue converted white LEDs, but so far tuning the non-RE Bi³⁺ related emissions through the crystal field modulation is still not discovered in the perovskite crystals. In this work, we design and report a type of Bi³⁺ doped La₂(Zn_x,Mg_1-x)TiO₆ (0 ≤ x ≤ 1) perovskite solid solutions, which enable showing the tunable Bi³⁺ excitation and emission positions. The XRD results show that gradual substitution of smaller Mg²⁺ ions with larger Zn²⁺ ions can lead to the blue-shifting of X-ray diffraction (XRD) position, revealing the expansion of cell lattice. Together with structural analysis, our refined XRD and time-resolved spectral results reveal that there is only one type of La site available for Bi³⁺ substitution. With this regular crystal lattice change, the crystal field strength around Bi³⁺ ions is found to vary regularly, allowing to realization of the excitation and emission spectral tuning, i.e., the Bi³⁺ excitation and emission positions as the Mg ions are replaced by the Zn ions can tune from 348?nm to 392?nm and from 405?nm to 433?nm, respectively. This Bi³⁺ spectral tuning peak after calculated by the dielectric chemical bond theory features a linear relationship with the crystal field strength and, thus, is ascribed to the crystal field modulation. On basis of the La₂(Zn_0.4,Mg_0.6)TiO₆ blue, SrGa₂S₄:Eu²⁺ green and Y₂O₃:Eu³⁺ red phosphors, a UV converted warm white LED device with desirable color rendering index (CRI) of 78, correlated color temperature (CCT) of 3650 K and good luminous efficacy of 118.13?lm/W, is fabricated. This work provides new insights into using the crystal-field modulation to discover more Bi³⁺ emission-tunable crystals for white LEDs in the future.     

Structural and luminescence properties of RE (RE = Eu, Tb):(MgCa)2Bi4Ti5O20 ceramics

Rare-earth ions (Eu³⁺, Tb³⁺) activated magnesium calcium bismuth titanate [(MgCa)₂Bi₄Ti₅O₂₀] ceramics were prepared by conventional solid state reaction method for their structural and luminescence properties. By using XRD patterns, the structural properties of ceramic powders have been analyzed. Emission spectrum of Eu³⁺:(MgCa)₂Bi₄Ti₅O₂₀ ceramic powder has shown strong red emission at 615 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ_exci = 393 nm and Tb³⁺:(MgCa)₂Bi₄Ti₅O₂₀ ceramic powder has shown green emission at 542 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 376 nm. In addition, from the measurements of scanning electron microscopy (SEM), Fourier transform-infrared (FTIR) and energy dispersive X-ray analysis (EDAX) results the morphology, structure and elemental analysis of these powder ceramics have been studied.     

Energy transfer and color-tunable emission in Ba2Y2Si4O13:Bi3+,Eu3+ phosphors

Single-composition Ba₂Y₂Si₄O₁₃:Bi³⁺,Eu³⁺ (BYSO:Bi³⁺,Eu³⁺) phosphors with color-tunable and white emission were prepared by conventional high temperature solid-state reaction method. The structural and luminescent properties of these phosphors were thoroughly investigated through X-ray diffraction, photoluminescence, and decay curves. BYSO:Bi³⁺ phosphors show two excitation peaks at 342 and 373 nm, and give two emission peaks at 414 and 503 nm, respectively, indicating that there are two sites of Bi³⁺ in BYSO. The energy transfer from Bi³⁺ to Eu³⁺ was investigated in detail. Varied hues from blue (chromaticity coordinate [0.219, 0.350]) to white (0.288, 0.350) and orange-red light (0.644, 0.341) can be generated by adjusting the content of Eu³⁺. Pure white light emission (0.311, 0.338) can be obtained under the excitation of 355 nm in BYSO:3%Bi³⁺,20%Eu³⁺ phosphor. Besides, BYSO:Bi³⁺,Eu³⁺ phosphors exhibit distinct thermal quenching properties, whose emission intensity at 473 K is 82.6% of that at 298 K. Our results indicate that BYSO:Bi³⁺,Eu³⁺ may be applied as conversion phosphors for n-UV-based W-LEDs.     

Solvothermal synthesis of red and green emitting Ca1.65Sr0.35SiO4:Eu and Ca1.65Sr0.35SiO4:Eu phosphors for solid-state lighting applications

A novel and facile synthetic approach has been trialed, and attempted with success in the preparation of two phosphors namely, a red emitting CaSrSiO₄:Eu³⁺ and a green emitting CaSrSiO₄:Eu²⁺. These phosphors were successfully synthesized using a simple co-precipitating solvo-thermal strategy wherein tetraethyl orthosilicate (TEOS) as silica source and the acetate precursors of strontium (Sr²⁺), calcium (Ca²⁺) and europium (Eu³⁺) are utilized. The material so obtained is subjected to an extensive photoluminescence behavior study. The concentration of the dopant (Eu³⁺and Eu²⁺) plays a significant role in the determination of photoluminescence behavior and hence a systematic and in-depth experimental studies were done and the results are synchronized. On interpretation of the output, it came to light that an intense emission signals sparked in the red region (590 and 615 nm) in the case of phosphor doped with Eu³⁺, which is excited under near ultra violet (395 nm) and blue (466 nm) region. In case of the CaSrSiO₄ sample doped with Eu²⁺_, an intense broad green signal (~510 nm) is obtained under the excitation range of 350–430 nm. The results obtained are quite encouraging and made a strong confirmation as, the solvo-thermally synthesized CaSrSiO₄, which is activated by the dopants namely Eu³⁺ and Eu²⁺ possesses an immense potential and it is exactly tapped by the adopted methodology. Despite its strong impact, it will also assure a strong revolution in the fabrication and thus the commercialization of white LEDs as both the red and green emitting phosphor.