Experimental In-Plane Behavior of Tuff Masonry Strengthened with Cementitious Matrix–Grid Composites

Tuff buildings are a significant part of the Mediterranean area and are to be preserved from a structural viewpoint especially in seismic areas. Over the past few decades, the interest in strengthening of historical tuff masonry structures has led to developing specific and noninvasive architectural and engineering strategies. In the present paper, a comprehensive experimental program on tuff masonry panels is presented; the results are intended as a contribution to the knowledge of in-plane behavior of tuff masonry strengthened with composite materials. Particularly, a cement based matrix-coated alkali resistant glass grid system (CMG) was used to strengthen tuff masonry walls; different CMG layouts were selected, and overall performances were compared with those of as-built ones. The characterization of base materials was carried out first, followed by uniaxial tests of masonry and shear tests on triplets. Finally, tuff masonry panels were subjected to diagonal compression loading under displacement control in order to measure their in-plane deformation and strength properties, including the postpeak softening regime in view of seismic applications.     

Nonlinear Behavior of a Masonry Subassemblage Before and After Strengthening with Inorganic Matrix-Grid Composites

Past experimental tests on a full-scale masonry wall with an opening evidenced the key role of the spandrel panel in the in-plane nonlinear response of the system. Recent seismic codes do not provide specific criteria to assess and to strengthen existing masonry spandrel panels with inorganic matrix-grid (IMG) composites. Numerical finite-element (FE) analyses are used to deepen the knowledge about the nonlinear response of masonry walls and the role of the IMG strengthening system. The comparison of experimental and numerical results contributes to the development of a simplified analytical model to assess the influence of the external reinforcement system on the in-plane seismic response of masonry wall systems. Some hints about the strengthening design that could change the failure mode from brittle shear to ductile flexure are given. Finally, a further enhancement of the IMG strengthening system is proposed to avoid the undesirable splitting phenomena attributable to compression forces and to exploit the full compressive strength of masonry against bending moments.     

Lateral Out-of-Plane Strengthening of Masonry Walls with Composite Materials

The structural behavior of masonry walls laterally strengthened with externally bonded composite materials to resist out-of-plane loads is theoretically and experimentally studied. Hollow concrete block masonry walls and solid autoclaved aerated concrete (AAC) block masonry walls are examined. A theoretical model that accounts for the cracking and the physical nonlinear behavior, the debonding of the composite layers, the arching effect, the interfacial stresses, and the unique modeling aspects of the laterally strengthened wall is presented. The experimental study includes loading to failure of 4 laterally strengthened masonry walls and 2 control walls. The experimental and analytical results point at the unique aspects of the lateral strengthening of masonry walls with composite materials. In particular, they reveal and explain the premature shear failure in laterally strengthened hollow concrete blocks walls and, on the other hand, demonstrate the potential of lateral fiber-reinforced polymer strengthening of AAC masonry walls. The laterally strengthened AAC masonry walls reveal improved strength, deformability, and integrity at failure characteristics.     

Shear Strengthening Masonry Panels with Sheet Glass-Fiber Reinforced Polymer

This paper investigates strengthening masonry walls using glass-fiber reinforced polymer (GFRP) sheets. An experimental research program was undertaken. Both clay and concrete brick specimens were tested, with and without GFRP strengthening. Single-sided strengthening was considered, as it is often not practicable to apply the reinforcement to both sides of a wall. Static tests were carried out on six masonry panels, under a combination of vertical preload, and in-plane horizontal shear loading. The mechanisms by which load was carried were observed, varying from the initial, uncracked state, to the final, fully cracked state. The results demonstrate that a significant increase of the in-plane shear capacity of masonry can be achieved by bonding GFRP sheets to the surface of masonry walls. The experimental data were used to assess the effectiveness of the GFRP strengthening, and suggestions are made to allow the test results to be used in the design of sheet GFRP strengthening for masonry structures.     

Evaluation of Masonry Deep Beams Externally Strengthened with CFRP Sheets

In this study, carbon fiber-reinforced polymer (CFRP) sheets were examined as a means to strengthening existing masonry walls allowing for efficient creation of doors, windows, and passage openings. The research reported here deals with eight masonry walls made with concrete blocks, subjected to three-point quasistatic loading. The parameters examined include the reinforcement configuration and their amount. While CFRP sheets were used as external reinforcement, companion studies were carried out with conventional steel rebars. Test results indicate an increase of 180% in shear strength of the reinforced walls as compared to reference unreinforced walls. Load-deflection relationships indicate that the combined plain masonry and CFRP laminate system possessed some nonlinear deformability. The use of CFRP laminates on the walls was found to have an influence on the mode of failure. Anchoring the CFRP laminates at both support regions helped in using a larger portion of the strength of the laminates. The reinforced walls exhibited diagonal shear cracks that developed at a much slower rate and were ultimately accompanied by the peeling off of the CFRP laminates.     

Modeling Concrete Masonry Walls Subjected to Explosive Loads

Concrete masonry unit walls subjected to blast pressure were analyzed with the finite element method, with the goal of developing a computationally efficient and accurate model. Wall behavior can be grouped into three modes of failure, which correspond to three ranges of blast pressures. Computational results were compared to high-speed video images and debris velocities obtained from experimental data. A parametric analysis was conducted to determine the sensitivity of computed results to critical modeling values. It was found that the model has the ability to replicate experimental results with good agreement. However, it was also found that, without knowledge of actual material properties of the specific wall to be modeled, computational results are not reliable predictors of wall behavior.     

In-Plane Shear Behavior of Masonry Panels Strengthened with NSM CFRP Strips. II: Finite-Element Model

A combined experimental and numerical program was conducted to study the in-plane shear behavior of clay brick masonry walls strengthened with near surface mounting carbon-fiber-reinforced polymer (CFRP) strips. This paper is focused on the numerical program. A two-dimensional finite-element (FE) model was used to simulate the behavior of FRP-strengthened wall tests. The masonry was modeled using the micromodeling approach. The FRP was attached to the masonry mesh using the shear bond-slip relationships determined from experimental pull tests. The model was designed in a way so that FRP crossing a sliding crack (perpendicularly) would prevent crack opening, normal to the direction of sliding (dilation), and increase sliding resistance. This sliding resisting mechanism was observed in the experimental tests. The FE model reproduced the key behaviors observed in the experiments, including the load-displacement response, crack development, and FRP reinforcement contribution. The FE model did not include masonry cracking adjacent to the FRP and through the wall thickness (as observed in some experiments). This type of cracking resulted in premature FRP debonding in the experiments. Debonding did not occur in the FE model because this type of masonry cracking was not modeled.     

Free Out-of-Plane Vibrations of Masonry Walls Strengthened with Composite Materials

The natural frequencies and the out-of-plane vibration modes of one-way masonry walls strengthened with composite materials are studied. Due to the inherent nonlinear behavior of the masonry wall, the dynamic characteristics depend on the level of out-of-plane load (mechanical load or forced out-of-plane deflections) and the resulting cracking, nonlinear behavior of the mortar material, and debonding of the composite system. In order to account for the nonlinearity and the accumulation of damage, a general nonlinear dynamic model of the strengthened wall is developed. The model is mathematically decomposed into a nonlinear static analysis phase, in which the static response and the corresponding residual mechanical properties are determined, and a free vibration analysis phase, in which the dynamic characteristics are determined. The governing nonlinear differential equations of the first phase, the linear differential eigenvalue problem corresponding to the second phase, and the solution strategies are derived. Two numerical examples that examine the capabilities of the model and study the dynamic properties of the strengthened wall are presented. The model is supported and verified through comparison with a step-by-step time integration analysis, and comparison with experimental results of a full-scale strengthened wall under impulse loading. The results show that the strengthening system significantly affects the natural frequencies of the wall, modifies its modes of vibration, and restrains the deterioration of the dynamic properties with the increase of load. The quantification of these effects contributes to the understanding of the performance of damaged strengthened walls under dynamic and seismic loads.     

Flexural Capacity of Glass FRP Strengthened Concrete Masonry Walls

Fiber-reinforced polymers (FRP) can provide a strengthening alternative for unreinforced and underreinforced masonry. The ease with which FRP can be installed on the exterior of a masonry wall makes this form of strengthening attractive to the owner, considering both reduced installation cost and down time of the occupied structure. Six unreinforced concrete masonry walls (four at 1.8 m tall and two at 4.7 m tall) were tested in out-of-plane flexure up to capacity. The walls were strengthened with glass FRP composite composed of unidirectional E-glass fabric with an epoxy matrix. The composite was adhered to the surface of the masonry using the same epoxy with the fibers oriented perpendicular to the bed joints. General flexural strength design equations are presented and compared with the results of the testing. It was found that the equations overpredicted the actual capacity of the test specimens by no more than 20%.     

FRP Confinement of Square Masonry Columns

The problem of masonry columns subjected to structural deficiency under axial load was studied and reported in this paper. The results of an extensive experimental campaign are presented in order to show the behavior of columns built with clay or with calcareous blocks, commonly found in southern Italy, especially in historical buildings. Rectangular masonry columns were tested for a total of 33 specimens; uniaxial compression tests were conducted on columns taking into account the influence of several variables: different strengthening schemes (internal and/or external confinement), curvature radius of the corners, amount of fiber-reinforced polymer (FRP) reinforcement, cross-section aspect ratio, and material of masonry blocks. Materials characterization was preliminarily carried out including a mechanical test on plain masonry. For all cases the experimental results evidenced a significant increase in load carrying capacity and ductility after FRP strengthening, which identified the columns as ductile elements despite the brittle nature of the unconfined masonry. Differences in mechanical behavior, due to the geometry of the columns, to the nature of different materials, to different strengthening schemes, and to the amount of reinforcement, are presented and discussed in the paper. The calibration of design equations recently developed by Italian National Research Council, CNR was conducted to compare analytical prediction and experimental results. The same procedure was applied to calibrate an analytical model recently published, in which the existing coefficients are related only to clay. Here the model is applied to limestone for the first time. Thus, new important information is furnished to researchers and practitioners involved in structural assessment and strengthening of compressed elements in historical buildings.     

Masonry Wall Crack Control with Carbon Fiber Reinforced Polymer

Restrained shrinkage is a major source of damage to buildings. By the combination of different construction materials, or through different conditions of exposure of different structural elements, differential dimensional change occurs. Thereby, stresses arise, which can cause cracking. In recent combined experimental and numerical research projects, this source of damage to masonry walls has been confirmed. The ability has been developed to predict the level of damage computationally. This paper addresses a method to reduce the width of cracks in masonry walls subjected to restrained shrinkage, to acceptable levels. Crack control by externally applied carbon fiber reinforced polymer (CFRP) reinforcement is studied. Although structural strengthening by CFRP reinforcement is actively researched, its application here to preserve structural serviceability is novel. An experiment was designed and performed to study the response of an unreinforced masonry wall to restrained shrinkage. Subsequently, the wall was repaired and reinforced on one face with CFRP strips. The required CFRP reinforcement was designed by finite element analysis, which also served as prediction of the response of the reinforced wall to restrained shrinkage.     

Strengthening of Infill Masonry Walls with FRP Materials

This paper evaluates the effectiveness of different externally bonded glass fiber–reinforced polymer (GFRP) systems for increasing the out-of-plane resistance of infill masonry walls to loading. The research included a comprehensive experimental program comprising 14 full-scale specimens, including four unstrengthened (control) specimens and 10 strengthened specimens. To simulate the boundary conditions of infill walls, all specimens consisted of a reinforced concrete (RC) frame, simulating the supporting RC elements of a building superstructure, which was infilled with solid concrete brick masonry. The specimens were loaded out-of-plane using uniformly distributed pressure to simulate the differential (suction) pressure induced by a tornado. Parameters investigated in the experimental program included aspect ratio, FRP coverage ratio, number of masonry wythes, and type of FRP anchorage. Test results indicated that the type of FRP anchorage had a significant effect on the failure mode. Research findings concluded that GFRP strengthening of infill masonry walls is effective in increasing the out-of-plane load-carrying capacity when proper anchorage of the FRP laminate is provided.     

Numerical Analysis of FRP-Composite-Strengthened RC Panels with Anchorages against Blast Loads

Extensive research has been conducted to investigate the blast effects on building structures and the protective design methods using the fiber-reinforced polymer (FRP) strengthening concepts in resisting structural damage and preventing injuries against dynamic explosive impacts. Both numerical and experimental studies have proved the effectiveness of FRP in strengthening structures to resist blast loads. However, problems related to end anchorage, bond length, and premature peeling have been concerns when strengthening structures in flexure or shear using FRP. In this paper, numerical analyses of FRP-composite-strengthened RC walls with or without additional anchors are carried out to examine the structural response under blast loads. The results illustrated that an anchor system is often necessary when using external FRP laminates for strengthening RC walls to prevent premature peeling. This study presents three simulations of RC walls, namely, an unstrengthened RC wall, an FRP-composite-strengthened RC wall with end anchorage, and an FRP-composite-strengthened RC wall with both end anchorage and anchors applied at a minimum spacing across the width and height of the RC wall. Commercial software LS-DYNA is used to carry out the structural response analysis. Numerical results show that anchorage of the FRP sheet may prevent peeling damage and therefore enhances the capacity of the FRP-strengthened RC walls against blast loads. However, anchors result in stress concentration and may cause FRP rupture.     

FRP-Retrofitted URM Walls under In-Plane Shear: Review and Assessment of Available Models

In the last two decades, several seismic retrofitting techniques for masonry structures have been developed and practiced and fiber-reinforced polymer (FRP) material has been increasingly used owing to its high strength/stiffness to mass ratio and easy application. Although much research has been carried out on FRP strengthening of unreinforced masonry (URM) structures, most of it has been experimental studies to investigate the effectiveness of retrofitting techniques rather than the development of a rational design model. In addition, more research has been conducted on FRP-retrofitted URM walls under out-of-plane loads where flexural behavior dominates, the research on the shear strength of FRP-retrofitted URM walls has been limited. This paper presents a review of research in this area. Existing retrofitting techniques are overviewed, followed by a detailed discussion of experimental results of failure modes as they are directly related to the design model. The available design models are then assessed based on a test database collected from the available literature. Limitations of each model are addressed.     

Behavior of Retrofitted URM Walls under Simulated Earthquake Loading

Unreinforced masonry (URM) buildings perform poorly under seismic forces and have been identified as the main cause of loss of life in recent earthquakes. Many of these structures fail in out-of-plane bending due to the lack of reinforcement. In this study, the experimental results from three half-scale unreinforced brick walls retrofitted with vertical composite strips are presented. The specimens were subjected to cyclic out-of-plane loading. Five reinforcement ratios and two different glass fabric composite densities were investigated. The mode of failure is controlled by tensile failure when wider and lighter composite fabrics are used and by delamination when stronger ones are used. The tested specimens were capable of supporting a lateral load up to 32 times the weight of the wall. A deflection as much as 2% of the wall height was measured. Although both URM walls and composite strips behave in a brittle manner, the combination resulted in a system capable of dissipating some energy. Retrofitting URM walls with composite strips proved to be a good and reliable strengthening alternative.     

Concept and Finite-Element Modeling of New Steel Shear Connectors for Self-Centering Wall Systems

Self-centering precast concrete walls have been found to provide excellent seismic resistance. Such systems typically exhibit low energy dissipation, requiring supplementary dissipating components to improve their seismic performance. Mild steel shear connectors can provide an economical energy dissipating element. The design and analysis of steel shear connectors for a new precast wall system has been undertaken. A series of finite-element analyses were conducted to investigate the behavior of different types of connectors. Emerged from these analyses is a oval-shaped connector (O-connector) that provided satisfactory force-displacement behavior and appeared well suited for the new wall system in high seismic regions. An extensive experimental test program was then conducted to verify the performance of the chosen O-connector, which confirmed the expected response with sufficient energy dissipation. The experimental data demonstrated good correlation with the finite-element model developed, providing satisfactory confidence in the finite-element technique used for the development of the different connectors.     

Ductile Anchorage for Connecting FRP Strengthening of Under-Reinforced Masonry Buildings

Fiber-reinforced polymer (FRP) composites have been examined as a convenient and cost-effective means of strengthening unreinforced masonry structures. Seismic design in the United States is almost entirely based on the assumption that the structural system provides a ductile failure mode. FRP strengthened masonry walls inherently have brittle failure modes due to the nature of the strengthening system. The concept explored in this article is the introduction of ductility using a hybrid strengthening system. This involves the placement of structural steel or reinforcing steel at critical locations in the lateral force resisting system. This article presents the testing and analysis of a ductile structural steel connection that can be used to strengthen the connection of FRP strengthened shear walls to the foundation. The connection also increases energy dissipation. Results indicate that a ductile failure mode can be attained when the connection is designed to yield prior to the failure of the FRP strengthening.     

Rehabilitation of Masonry Walls Using Unobtrusive FRP Techniques for Enhanced Out-of-Plane Seismic Resistance

Earthquake damage to unreinforced masonry buildings has shown the vulnerability of perimeter walls to out-of-plane failure. This paper describes a study that was carried out to develop and test innovative fiber reinforced polymer (FRP) rehabilitation techniques that meet the stringent requirements for strengthening historical buildings and to be cost-effective alternatives applicable to other existing masonry structures. Unobtrusive FRP rehabilitation techniques that utilize flexible carbon fiber composite cables, mounted near the surface of the fa?ade walls in epoxy-filled grooves in the bed and head joints, were developed. Ten full size walls were constructed of clay bricks and retrofitted using the developed FRP rehabilitation techniques. The test results demonstrated the high efficiency of the rehabilitation techniques under both monotonic and quasistatic cyclic loadings. Significant increases in ultimate capacities, energy absorption, and deformability were achieved for various reinforcing schemes compared to the behavior of the unreinforced walls.     

Out-of-Plane Strengthening of Masonry Walls with Reinforced Composites

This paper presents an investigation into the effectiveness of using fiber-reinforced composite overlays to strengthen existing unreinforced masonry walls to resist out-of-plane static loads. A total of fifteen wall panels [1,200 × 1,800 × 200 mm (4 ft × 6 ft × 8 in.)] were tested. Twelve panels were assembled with fiber-reinforcing systems attached to the tension side, and the remaining three control walls were left without any external reinforcement. Two configurations of external reinforcement were evaluated. The first reinforcement configuration consisted of two layers of fiber-reinforced plastic webbing and the second consisted of vertical and horizontal bands of undirectional fiber composites. The three wall specimens without external reinforcement were tested to evaluate the change in the system strength and behavior with application of the external reinforcing systems. In addition to the two fiber configurations, the testing program also evaluated two methods of surface preparation of the walls, sand blasting, and wire brush. All specimens were thoroughly washed by water jet, 48 hours prior to application of the fiber-reinforcing systems. Three specimens were tested for each variable. A uniformly distributed lateral load was applied to each panel using the procedures described in the ASTM Standard E-72 Test Method (airbag). Failure loads, strains in the external reinforcement (FRP), out-of-plane deformations, and failure modes were recorded. Recommendations on the usefulness of the proposed technique as a means of strengthening masonry walls for out-of-plane loads are presented. In general, flexural strength of masonry walls can be increased if the shear failure is controlled.     

Unreinforced Concrete Masonry Walls Strengthened with CFRP Sheets and Strips under Pendulum Impact

Impact tests using drop-weight pendulum on nine 1.2-m-high full-scale concrete masonry block walls were conducted to investigate the out-of-plane impact behavior of unreinforced masonry (URM) walls externally strengthened with carbon-fiber-reinforced polymer (CFRP) composites. Three strengthening schemes on one side of the wall were studied: continuous unidirectional and continuous woven sheets, discrete strips in a vertical pattern, and discrete strips in orthogonal and diagonal patterns. All walls were vertically positioned resting on a knife-edge support with one face leaning against two steel rollers close to the upper and lower edges of the wall. The impact load was applied at the wall center through a drop-weight pendulum impact tester with various drop heights. Test results revealed that using composite laminates or strips could significantly improve the impact performance of URM walls. The wall strengthened with continuous woven sheets performed better than the one with unidirectional sheet. With the same amount of fiber-reinforced polymer strip material, the wall with narrower but more closely spaced strips performed slightly better than the one with wider strips.