首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
This study is aimed at investigating the effect of soil–structure interaction and substructure properties at the abutments on the distribution of live-load effects in integral abutment bridge (IAB) components. For this purpose, numerous 3D and corresponding 2D structural models of typical IABs are built and analyzed under AASHTO live-load. In the analyses, the effect of various geotechnical and substructure properties such as foundation soil stiffness, considering and neglecting the effect of backfill, backfill compaction level, considering and neglecting the effect of wingwalls, abutment height and thickness, as well as number, size, and orientation of the piles are considered. The results from the 2D and 3D analyses are then used to calculate the live-load distribution factors (LLDFs) for the components of IABs as a function of the above-mentioned properties. The analyses results revealed that soil–structure interaction has a significant effect on the LLDFs for the abutment, but negligible effects on those for the girders and piles. Furthermore, the abutment height is observed to have a considerable effect on the LLDFs calculated for the abutment and pile moments. Moreover, the wingwalls are observed to have only a negligible effect on the LLDFs for all the IAB components.  相似文献   

2.
This paper presents the results of a parametric study that investigated the effect of multilanes and continuity on wheel load distribution in steel girder bridges. Typical one- and two-span, two-, three-, and four-lane, straight, composite steel girder bridges were selected for this study. The major bridge parameters chosen for this study were the span length, girder spacing, one- versus two-spans, and the number of lanes. These parameters were varied within practical ranges to study their influence on the wheel load distribution factors. A total of 144 bridges were analyzed using the finite-element method. The computer program, SAP90, was used to model the concrete slab as quadrilateral shell elements and the steel girders as space frame members. Simple supports were used to model the boundary conditions. AASHTO HS20 design trucks were positioned in all lanes of the one- and two-span bridges to produce the maximum bending moments. The calculated finite-element wheel load distribution factors were compared with the AASHTO and the National Cooperative Highway Research Program (NCHRP) 12-26 formulas. The results of this parametric study agree with the newly developed NCHRP 12-26 formula and both were, in general, less than the empirical AASHTO formula (S∕5.5) for longer span lengths [>15.25 m (50 ft)] and girder spacing >1.8 m (6 ft). This paper demonstrates that the multiple lane reduction factors are built into the newly developed distribution factors for steel girder bridges that were presented in the NCHRP 12-26 final report. It should be noted that AASHTO LRFD contains a similar expression that results in a value that is 50% of the value in the equations developed as a part of NCHRP 12-26. This is due to the fact that AASHTO LRFD consider the entire design truck instead of half-truck (wheel loads) as the case in the NCHRP 12-26 report and the AASHTO Standard Specifications for Highway Bridges. Therefore, this paper supports the use of the new distribution factors for steel girder bridges developed as a part of NCHRP 12-26 and consequently the distribution factors presented in the AASHTO LRFD Bridge Design Specifications.  相似文献   

3.
The general objective of this research was the construction and evaluation of a bridge using high-performance lightweight concrete (HPLWC). The resulting bridge over the Chickahominy River near Richmond, Va., consists of 15 prestressed American Association of State Highway and Transportation Officials (AASHTO) Type IV girders made of HPLWC with a density of 1,920?kg/m3 and a minimum required 28-day compressive strength of 55?MPa. The bridge also has a lightweight concrete (LWC) deck with a density of 1,850?kg/m3 and a minimum required 28-day compressive strength of 30?MPa. This research study is chiefly concerned with investigating the effects of using lightweight concrete in prestressed girders on transfer length, development length, flexural strength, girder live-load distribution factor, and dynamic load allowance. Transfer length was determined to be 432?mm, or 33?db, for several girders at the time of prestress transfer. The development length was determined to be between 1,830 and 2,440?mm, while the flexural strength ranged from 11 to 30% higher than the AASHTO flexural capacity. The measured distribution factors and dynamic load allowance were smaller than the AASHTO standard and LRFD values.  相似文献   

4.
This study presents an evaluation of shear and moment live-load distribution factors for a new, prestressed concrete, spread box-girder bridge. The shear and moment distribution factors were measured under a live-load test using embedded fiber-optic sensors and used to verify a finite element model. The model was then loaded with the American Association of State Highway and Transportation (AASHTO) design truck. The resulting maximum girder distribution factors were compared to those calculated from both the AASHTO standard specifications and the AASHTO LRFD bridge design specifications. The LRFD specifications predictions of girder distribution factors were accurate to conservative when compared to the finite element model for all distribution factors. The standard specifications predictions of girder distribution factors ranged from highly unconservative to highly conservative when compared to the finite element model. For the study bridge, the LRFD specifications would result in a safe design, though exterior girders would be overdesigned. The standard Specifications, however, would result in an unsafe design for interior girders and overdesigned exterior girders.  相似文献   

5.
The American Association of State Highway and Transportation Officials (AASHTO) specifications provide formulas for determining live load distribution factors for bridges. For load distribution factors to be accurate, the behavior of the bridge must be understood. While the behavior of right-angle bridges and bridges with limited skews is relatively well understood, that of highly skewed bridges is not. This paper presents a study aimed at developing a better understanding of the transverse load distribution for highly skewed slab-on-steel girder bridges. The study involved both a diagnostic field test of a recently constructed bridge and an extensive numerical analysis. The bridge tested and analyzed is a two-span, continuous, slab-on-steel composite highway bridge with a skew angle of 60°. The bridge behavior is defined based on the field test data. Finite-element analyses of the bridge were conducted to investigate the influence of model mesh, transverse stiffness, diaphragms, and modeling of the supports. The resulting test and analytical results are compared with AASHTO’s Load and Resistance Factor Design formulas for live load distribution to assess the accuracy of the current empirical formulas.  相似文献   

6.
This paper presents simple relationships for calculating live-load distribution factors for glued-laminated timber girder bridges with glued-laminated timber deck panels. Analytical models were developed using the Ansys 113 finite-element program, and the results were validated using recorded data from four in-service timber bridges. The effects of the bridge span length, the spacing between girders, and the bridge width on the distribution of the live load were investigated by using the validated models. The live-load distribution factors obtained from the field test and the analytical models were compared with those obtained using the AASHTO LRFD Bridge Design Specifications2 live-load distribution relations. The comparison showed that the live-load distribution factors obtained by using the AASHTO LRFD Bridge Design Specifications2 were conservative. For this reason, statistical methods were used to develop accurate relationships that can be used to calculate the live-load distribution factors in the design of glued-laminated girder bridges.  相似文献   

7.
Design and evaluation of prestressed concrete I-girder bridges is in large part dependent on the transverse load distribution characteristics and the dynamic load amplification, as well as service level, live load, and tensile stresses induced in the girders. This study presents the results of field tests conducted on three prestressed concrete I-girder bridges to obtain dynamic load allowance statistics, girder distribution factors (GDF), and service level stress statistics. The field-based data are also compared to approximate and numerical model results. Bridge response was measured at each girder for the passage of test trucks and normal truck traffic. The dynamic amplification is observed to be a strong function of peak static stress and a weak function of vehicle speed and is independent of span length, number of axles, and configuration. GDFs for one- and two-lanes are less than code specified GDFs. Results from the numerical grillage models agree closely with experimentally derived results for transverse distribution.  相似文献   

8.
Modern highway bridges are often subject to tight geometric restrictions and, in many cases, must be built in curved alignment. These bridges may have a cross section in the form of a multiple steel box girder composite with a concrete deck slab. This type of cross section is one of the most suitable for resisting the torsional, distortional, and warping effects induced by the bridge’s curvature. Current design practice in North America does not specifically deal with shear distribution in horizontally curved composite multiple steel box girder bridges. In this paper an extensive parametric study, using an experimentally calibrated finite-element model, is presented, in which simply supported straight and curved prototype bridges are analyzed to determine their shear distribution characteristics under dead load and under AASHTO live loadings. The parameters considered in this study are span length, number of steel boxes, number of traffic lanes, bridge aspect ratio, degree of curvature, and number and stiffness of cross bracings and of top-chord systems. Results from tests on five box girder bridge models verify the finite-element model. Based on the results from the parametric study simple empirical formulas for maximum shears (reactions) are developed that are suitable for the design office. A comparison is made with AASHTO and CHBDC formulas for straight bridges. An illustrative example of the design is presented.  相似文献   

9.
This paper describes detailed flexural behavior, including live load distributions, of a four-span prestressed concrete girder bridge supported by 14?m long C-shape girders (4 @ 14.05 = 56.2?m). The bridge has been damaged by frequent impact from heavy trucks, and repaired using prestressed carbon fiber-reinforced polymer sheets. A calibrated finite element analysis is conducted to investigate the flexural behavior (i.e., stress redistribution, deflection, live load distribution, and applied load effects) of the bridge in three different phases (i.e., undamaged, damaged, and repaired states) under various loading configurations. Strain localizations are noted at the damaged and repaired locations. Assessment of existing bridge codes such as the Association of State Highway and Transportation Officials Load Resistance Factor Design and Canadian Highway Bridge Design Code is conducted. The bridge codes predict well the nominal live load effect on the exterior girder, but underestimate the effect on the interior girders. A refined analysis may be recommended for this type of bridge.  相似文献   

10.
In this paper, derivation and computed formulas are provided for the shear lag coefficient in a simply supported prestressed concrete box girder under dead load. In the case of prestressed tendons having parabolic configurations, formulas to compute the shear lag effect are also developed. The magnitude of upward loading intensity caused by prestress as well as the relationship between the height of the box girder and the sag of prestressed tendons have been fully treated. Conclusions are drawn that the shear lag effect caused by dead load and prestress force is equivalent to dead load acting alone, provided that the prestressed tendon is set up with a parabolic profile. Shear lag effect caused by movable load is also analyzed according to the eccentricity of the load to the half-width ratio of the box girder. Charts were prepared to predict the shear lag coefficient for live load. Finally, having considered the shear deformation of flanges, the deflection of box girders is studied for both uniformly distributed load and concentrated load. Examples are given for illustrative purpose.  相似文献   

11.
The purpose of this paper is to develop new formulas for live load distribution in horizontally curved steel I-girder bridges. The formulas are developed by utilizing computer model results for a number of different horizontally curved steel I-girder bridges. The bridges used in this study are modeled as generalized grillage beam systems composed of horizontally curved beam elements for steel girders and substructure elements for lateral wind bracing and cross frames which consist of truss elements. Warping torsion is taken into consideration in the analysis. The effect of numerous parameters, including radius of curvature, girder spacing, overhang, etc., on the load distribution are studied. Key parameters affecting live load distribution are identified and simplified formulas are developed to predict positive moment, negative moment, and shear distribution for one-lane and multiple-lane loading. Comparisons of the formulas with finite element method and grillage analysis show that the proposed formulas have more accurate results than the various available American Association of State Highway and Transportation Officials specifications. The formulas developed in this study will assist bridge engineers and researchers in predicting the actual live load distribution in horizontally curved steel I-girder bridges.  相似文献   

12.
This paper presents findings of field tests and analysis of two conventionally reinforced concrete (CRC) deck girder bridges designed in the 1950s. The bridges are in-service and exhibit diagonal cracks. Stirrup strains in the bridge girders at high shear regions were used to estimate distribution factors for shear. Impact factors based on the field tests are reported. Comparison of field measured responses with AASHTO factors was performed. Three-dimensional elastic finite-element analysis was employed to model the tested bridges and determine distribution factors specifically for shear. Eight-node shell elements were used to model the decks, diaphragms, bent caps, and girders. Beam elements were used to model columns under the bent caps. The analytically predicted distribution factors were compared with the field test data. Finally, the bridge finite-element models were employed to compare load distribution factors for shear computed using procedures in the AASHTO LRFD and Standard Specifications.  相似文献   

13.
The conventional analysis and design of highway bridges ignore the contribution of sidewalks and∕or railings in a bridge deck when calculating the flexural strength of superstructures. The presence of sidewalks and railings or parapets acting integrally with the bridge deck have the effect of stiffening the outside girders and attracting more load while reducing the load effects in the interior girders. This paper presents the results of a parametric study showing the influence of typical sidewalks and railings on wheel load distribution as well as on the load-carrying capacity of highway bridges. A typical one-span, two-lane, simply supported, composite steel girder bridge was selected in order to investigate the influence of various parameters such as: span length, girder spacing, sidewalks, and railings. A total of 120 bridges were analyzed using three-dimensional finite-element analysis. American Association of State Highway and Transportation Officials (AASHTO) HS20 design trucks were positioned in both lanes to produce the maximum moments. The finite-element analysis results were also compared with AASHTO wheel load distribution factors. The AASHTO load and resistance factor design (LRFD) wheel load distribution formula correlated conservatively with the finite-element results and all were less than the typical empirical formula (S∕5.5). The presence of sidewalks and railings were shown to increase the load-carrying capacity by as much as 30% if they were included in the strength evaluation of highway bridges.  相似文献   

14.
Significant discrepancies in girder distribution factors have been observed between actual bridge field-testing results and AASHTO code predictions. One of the reasons for the discrepancies is that code methods fail to account for the existence of secondary members such as parapets in bridges. This research investigates the effects of parapets and bridge aspect ratio on live-load moment distribution for bridge girders. The influence on distribution factors of parapets with varying overhang lengths and of aspect ratio with varying roadway width is investigated. To study the effects of parapets and aspect ratios, 34 two-span continuous bridges with a 0° or a 45° skew angle and with varied structure parameters are analyzed using the finite element method. The distribution factors obtained from these analyses are compared with those from the AASHTO methods. The presence of parapets is shown to reduce distribution factors by as much as 36 and 13% for exterior and interior girders, respectively. The effect of parapets is slightly less for skewed bridges. Aspect ratio is shown to have very little effect on distribution factors until the ratio exceeds 1.8.  相似文献   

15.
Precast bridges are often constructed as single span for dead load, but continuous for live load. A diaphragm connection is provided for negative moment continuity. However, the connection may also be subjected to positive moments due to time-dependent effects. Because these moments may be large enough to damage the diaphragm or even the girders, a positive moment connection is often provided. This paper reports on a study to determine the types of positive moment connections used across the country and to identify potential problems with these types of connections. A questionnaire survey was conducted to assess the state of practice for precast prestressed concrete bridges made continuous. The survey provides valuable information on this type of bridge and updates a previous survey on this subject.  相似文献   

16.
This paper describes the implementation and evaluation of a long-term strain monitoring system on a three-span, multisteel girder composite bridge located on the interstate system. The bridge is part of a network of bridges that are currently being monitored in Connecticut. The three steel girders are simply supported, whereas the concrete slab is continuous over the interior supports. The bridge has been analyzed using the standard AASHTO Specifications and the analytical predictions have been compared with the field monitoring results. The study has included determination of the location of the neutral axes and the evaluation of the load distributions to the different girders when large trucks cross the bridge. A finite-element analysis of the bridge has been carried out to further study the distribution of live load stresses in the steel girders and to study how continuity of the slabs at the interior joints would influence the overall behavior. The results of the continuous data collection are being used to evaluate the influence of truck traffic on the bridge and to establish a baseline for long-term monitoring.  相似文献   

17.
The AASHTO LRFD load distribution factor equation was developed based on elastic finite element analysis considering only primary members, i.e., the effects of secondary elements such as lateral bracing and parapets were not considered. Meanwhile, many bridges have been identified as having significant cracking in the concrete deck. Even though deck cracking is a well-known phenomenon, the significance of pre-existing cracks on the live load distribution has not yet been assessed. The purpose of this research is to investigate the effect of secondary elements and deck cracking on the lateral load distribution of girder bridges. First, secondary elements such as diaphragms and parapets were modeled using the finite element method, and the calculated load distribution factors were compared with the code-specified values. Second, the effects of typical deck cracking and crack types that have a major effect on load distribution were identified through a number of nonlinear finite element analyses. It was established that the presence of secondary elements may produce load distribution factors up to 40% lower than the AASHTO LRFD values. Longitudinal cracking was found to increase the load distribution factor by up to 17% when compared to the LRFD value while the transverse cracking was found to not significantly influence the transverse distribution of moment.  相似文献   

18.
In bridge engineering, the three-dimensional behavior of a bridge system is usually reduced to the analysis of a T-beam section, loaded by an equivalent fraction of the applied live load, which is called the live load distribution factor (LDF). The LDF is defined in the both the AASHTO Standard Specifications and the LRFD Specifications primarily for concrete slabs and has inherent applicable limitations. This paper provides explicit formulas using series solutions for LDF of orthotropic bridge decks, applicable to various materials but intended for fiber-reinforced polymer (FRP) decks. The present formulation considers important parameters that represent the response characteristics of the structure that are often omitted or limited in the AASHTO Specifications. A one-term series solution is proposed based on the macroflexibility approach, in which the bridge system is simplified into two major components, deck and stringers. The governing equations for the two components are obtained separately, and the deflections and interaction forces are solved by ensuring displacement compatibility at stringer lines. The LDF is calculated as the ratio of the single stringer interaction force to the summation of total stringer interaction forces. To verify this solution, a finite-element (FE) parametric study is conducted on 66 simply supported concrete slab-on-steel girder bridges. The results from the series solution correlates well with the FE results. It is also illustrated that the series solution can be applied to predict LDF for FRP deck-on-steel girder bridges, by favorable comparisons among the analytical, FE, and testing results for a one-third-scale bridge model. The scale test specimen consists of an FRP sandwich deck attached to steel stringers by a mechanical connector. The series solution is further used to obtain multiple regression functions for the LDF in terms of nondimensional variables, which can be used for simplified design purposes.  相似文献   

19.
Currently, the load rating is the method used by State DOTs for evaluating the safety and serviceability of existing bridges in the United States. In general, load rating of a bridge is evaluated when a maintenance, improvement work, change in strength of members, or addition of dead load alters the condition or capacity of the structure. The AASHTO LRFD specifications provide code provisions for prescribing an acceptable and uniform safety level for the design of bridge components. Once a bridge is designed and placed in service, the AASHTO Manual for Condition Evaluation of Bridges provides provisions for determination of the safety and serviceability of existing bridge components. Rating for the bridge system is taken as the minimum of the component ratings. If viewed from a broad perspective, methods used in the state-of-the-practice condition evaluation of bridges at discrete time intervals and in the state-of-the-art probability-based life prediction share common goals and principles. This paper briefly describes a study conducted on the rating and system reliability-based lifetime evaluation of a number of existing bridges within a bridge network, including prestressed concrete, reinforced concrete, steel rolled beam, and steel plate girder bridges. The approach is explained using a representative prestressed concrete girder bridge. Emphasis is placed on the interaction between rating and reliability results in order to relate the developed approach to current practice in bridge rating and evaluation. The results presented provide a sound basis for further improvement of bridge management systems based on system performance requirements.  相似文献   

20.
Five prestressed concrete girders made with high-performance concrete were instrumented using vibrating-wire strain gages. Their behavior was monitored for three years from the time of casting. The measured change in concrete strain at the centroid of the prestressing strands was used to evaluate changes in prestress. The total measured prestress loss was as large as 28% of the total jacking stress. Due to the higher stresses, this loss is larger than would be expected for a girder made with conventional-strength concrete. The observed values of prestress losses were compared with values calculated using the recommended AASHTO LRFD and NCHRP 18-07 procedures. The AASHTO LRFD method overpredicted the average prestress losses for the highly stressed Span 2 girders by 20% while the NCHRP method underpredicted the average losses by 16%. The NCHRP method was found to be more inclusive and adaptable to regional construction. The calculated NCHRP Span 2 losses were found to be within 10% of the average measured losses when the elastic shortening losses were calculated based on measured data and differential shrinkage was calculated based on continuous beams.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号