Remarkable piezoelectricity and stable high‐temperature dielectric properties of quenched BiFeO3–BaTiO3 ceramics

Effects of quenching process on dielectric, ferroelectric, and piezoelectric properties of 0.71BiFeO₃?0.29BaTiO₃ ceramics with Mn modification (BF–BT?xmol%Mn) were investigated. The dielectric, ferroelectric, and piezoelectric properties of BF–BT?xmol%Mn were improved by quenching, especially to the BF–BT?0.3 mol%Mn ceramics. The dielectric loss tanδ of quenched BF–BT?0.3 mol%Mn ceramics was only 0.28 at 500°C, which was half of the slow cooling one. Meanwhile, the remnant polarization P_r of quenched BF–BT?0.3 mol%Mn ceramics increased to 21 μC/cm². It was notable that the piezoelectric constant d₃₃ of quenched BF–BT?0.3 mol%Mn ceramics reached up to 191 pC/N, while the T_C was 530°C, showing excellent compatible properties. The BF–BT?xmol%Mn system ceramics showed to obey the Rayleigh law within suitable field regions. The Rayleigh law results indicated that the extrinsic contributions to the dielectric and piezoelectric responses of quenched BF–BT?xmol%Mn ceramics were larger than the unquenched ceramics. These results presented that the quenched BF–BT?xmol%Mn ceramics were promising candidates for high‐temperature piezoelectric devices.     

Piezoelectric properties of (Na0.5K0.5)(Nb1‐xSbx)O3‐SrTiO3 ceramics with tetragonal‐pseudocubic PPB structure

CuO‐added 0.96(Na_0.5K_0.5)(Nb_1‐xSb_x)O₃‐0.04SrTiO₃ ceramics sintered at the low temperature of 960°C for 10 hours showed dense microstructures and high relative densities. The specimens with 0.0 ≤  x ≤ 0.04 had orthorhombic‐tetragonal polymorphic phase boundary (PPB) structure. Tetragonal‐pseudocubic PPB structure was observed in specimens with 0.05 ≤  x ≤ 0.07, while the specimen with x = 0.08 has a pseudocubic structure. The structural variation in the specimens is explained by the decreases in the orthorhombic‐tetragonal transition temperature and Curie temperature with the addition of Sb⁵⁺ ions. The specimens with 0.05 ≤  x ≤ 0.07, which have tetragonal‐pseudocubic PPB structure, had large electric field‐induced strains of 0.14%‐0.016%. Moreover, these specimens also showed increased d₃₃ values between 280 pC/N and 358 pC/N. In particular, the specimen with x = 0.055 showed particularly enhanced piezoelectric properties: d₃₃ of 358 pC/N, k_p of 0.45, and the electric field‐induced strain of 0.16% at 4.5 kV/mm.     

Large Piezoelectric Response and Polarization in Relaxor Ferroelectric PbTiO3–Bi(Ni1/2Zr1/2)O3

New binary system (1?x) PbTiO₃?xBi(Ni_1/2Zr_1/2)O₃ (PT–100x BNZ) with x ≤ 0.45 were synthesized via solid‐state reaction route. A morphotropic phase boundary (MPB) was identified around x = 0.40 by X‐ray diffraction (XRD) method. The ceramics with MPB composition exhibit enhanced ferroelectric properties. A large piezoelectric coefficient (d₃₃) up to 400 pC/N was obtained for the PT–40BNZ, which is comparable with the PbTiO₃–BiScO₃ (PT–BS, 450 pC/N).The frequency dependence of dielectric permittivity of PT–40BNZ shows characteristic of a strong relaxor feature and a transition temperature around 290°C (1 MHz). Temperature effect on the unipolar strain was also investigated. The present system with high d₃₃ is a competitive piezoelectric material, as no expensive oxide is used here compared with the PT–BS.     

Novel BiFeO3–BaTiO3–Ba(Mg1/3Nb2/3)O3 Lead‐Free Relaxor Ferroelectric Ceramics for Energy‐Storage Capacitors

A novel lead‐free relaxor ferroelectric ceramic of (0.67?x)BiFeO₃–0.33BaTiO₃–xBa(Mg_1/3Nb_2/3)O₃ [(0.67?x)BF–0.33BT–xBMN, x = 0–0.1] was prepared by a solid‐state reaction method. A relatively high maximum polarization P_max of 38 μC/cm² and a low remanent polarization P_r of 5.7 μC/cm² were attained under 12.5 kV/mm in the x = 0.06 sample, leading to an excellent energy‐storage density of W ~1.56 J/cm³ and a moderate energy‐storage efficiency of η ~75%. Moreover, a good temperature stability of the energy storage was obtained in the x = 0.06 sample from 25°C to 190°C. The achievement of these characteristics was basically attributed to an electric field induced reversible ergodic to ferroelectric phase transition owing to similar free energies near a critical freezing temperature. The results indicate that the (0.67?x)BF–0.33BT–xBMN lead‐free realxor ferroelectric ceramic could be a promising dielectric material for energy‐storage capacitors.     

Enhanced piezoelectric strain of BiFeO3–Ba(Zr0.02Ti0.98)O3 lead-free ceramics near the phase boundary

The xBiFeO₃-(1-x)Ba(Zr_0.02Ti_0.98)O₃ + 1.0 mol% MnO₂ (xBF-BZT) lead-free piezoelectric ceramics were prepared by conventional solid-state reaction method. The structure, dielectric, and piezoelectric properties were studied. X-ray diffraction (XRD) analysis showed that xBF-BZT ceramics exhibited pure perovskite structure with the coexistence of tetragonal and rhombohedral phases (0.66 ≤ x ≤ 0.74). The Curie temperature T_c, the dielectric constant ε_r (1 kHz), dielectric loss tanδ (1 kHz), piezoelectric constant d₃₃, coercive field E_c (80 kV/cm), and remnant polarization P_r (80 kV/cm) of 0.7BF-0.3BZT-Mn ceramics were 491°C, 633, 0.044, 165 pC/N, 35.6 kV/cm, and 22.6 μC/cm², respectively. The unipolar strain of 0.7BF-0.3BZT reached up to 0.20% under the electric field of 60 kV/cm, which is larger than that (0.15%) of BiFeO₃–BaTiO₃ ceramics. These results indicated that the xBF-BZT ceramics were promising candidates for high-temperature piezoelectric materials.     

Enhanced Multiferroic and Magnetocapacitive Properties of (1 − x)Ba0.7Ca0.3TiO3–xBiFeO3 Ceramics

The structures, Curie temperature, dielectric relaxor behaviors, ferroelectricity, ferromagnetism, and magnetocapacitance of the (1?x)Ba_0.70Ca_0.30TiO₃–xBiFeO₃ [(1?x)BCT–xBF, x = 0–0.90] solid solutions have been systematically investigated. The ceramics have coexisted tetragonal (T) and orthorhombic (O) phases when x ≤ 0.06, coexisted pseudocubic (PC) and O phases when x = 0.065, coexisted cubic and O phases when 0.07 ≤ x ≤ 0.12, PC phase when 0.21 ≤ x ≤ 0.42, coexisted T and rhombohedral (R) phases when 0.52 ≤ x ≤ 0.70, and R phase when x ≥ 0.75. Significantly, composition‐dependent microstructures and Curie temperature are observed, the average grain size increases from 1.9 μm for x = 0, reaches 12.0 μm for x = 0.67, and then decreases to 1.3 μm for x = 0.90. At room temperature, the ceramics with x = 0.42–0.70 show piezoelectric properties and multiferroic behaviors, characterized by the polarization‐electric field, polarization current intensity–electric field, and magnetization–magnetic field curves, the composition with x = 0.67 has maximum polarization, remnant polarization, maximum magnetization, and remnant magnetization of 15.0 μC/cm², 9.1 μC/cm², 0.33 emu/g, and 0.14 emu/g, respectively. In addition, the magnetocapacitance is evidenced by the increased relative dielectric constant with increasing the applied magnetic field (H). With ΔH = 8 kOe, the composition with x = 0.67 shows the largest values of (ε_r(H) ? ε_r(0))/ε_r(0) = 2.96% at room temperature. The structure–property relationship is discussed intensively.     

Correlation between grain size and electrical properties of high-temperature lead-free 0.70BiFeO3-0.30BaTiO3 ceramics

0.70BiFeO₃-0.30BaTiO₃ (0.70BF-0.30BT) ceramics have been widely concerned because of their potential applications for high-temperature piezoelectric devices. In this work, a series of dense 0.70BF-0.30BT ceramics with average grain size variation from 0.55 to 6.0 μm were prepared. XRD results indicate that 0.70BF-0.30BT ceramics show the coexistence of rhombohedral and pseudo-cubic phases and the volume fraction of the rhombohedral phase increase with the grain size. The dielectric, ferroelectric and piezoelectric properties increase with the grain size initially from 0.55 to 5.0 μm and then decrease slightly. Values of d₃₃, P_r, and ε_r, of 0.70BF-0.30BT ceramics with the grain size of 5.0 μm are 185 pC/N, 21.2 μC/cm², and 638, respectively, about five times higher than those ceramics with fine-grain of 0.55 μm. Of particular importance is that 0.70BF-0.30BT ceramics with large grain sizes possess better piezoelectric thermal stability due to the much stabler poled domain state with the rising temperature. The detailed structural studies indicate that the enhanced electric properties are owing to the significantly improved domain motion and the increased lattice distortion. This clarifying the relationship between electrical properties and grain size offers a novel way of improving the performances of piezoceramics.     

Normal‐Relaxor‐Diffuse Ferroelectric Phase Transition and Electrical Properties of Bi(Mg1/2Ti1/2)3–PbZrO3–PbTiO3 Solid Solution Ceramics Near the Morphotropic Phase Boundary

Perovskite‐type xBi(Mg_1/2Ti_1/2)O₃–(0.56 ? x)PbZrO₃–0.44PbTiO₃ (xBMT–PZ–PT) ternary solid solution ceramics were synthesized via a conventional solid‐state reaction method. The phase transition behaviors, dielectric, ferroelectric, and piezoelectric properties were investigated as a function of the BMT content. The X‐ray diffraction analysis showed that the tetragonality of xBMT–PZ–PT was enhanced with increasing the BMT content, and a morphotropic phase boundary (MPB) between rhombohedral and tetragonal phases was identified approximately in the composition of x = 0.08. In addition, the dielectric diffuseness and frequency dispersion behavior were induced with the addition of BMT and a normal‐relaxor‐diffuse ferroelectric transformation was observed from the PZ‐rich side to the BMT‐rich side. The electrical properties of xBMT–PZ–PT ceramics exhibit obviously compositional dependence. The x = 0.08 composition not only possessed the optimum properties with ε^T₃₃/ε₀ = 1450, Q_m = 69, d₃₃ = 390 pC/N, k_p = 0.46, P_r = 30 μC/cm², E_c = 1.4 kV/mm, T_c = 325°C, and a strain of 0.174% (d₃₃^* = 436 pm/V) under an electric field of 4 kV/mm as a result of the coexistence of two ferroelectric phases near the MPB, but also owned a good thermal‐depolarization behavior with a d₃₃ value of >315 pC/N up to 290°C and a frequency‐insensitive strain behavior.     

Influence of Ca substitution on microstructure and electrical properties of Ba(Zr,Ti)O3 ceramics

In the present work, lead-free (Ba_1?xCa_x)(Zr_0.04Ti_0.96)O₃ (x=0.00–0.09) ceramics were fabricated via a solid-state reaction method. The microstructure and electrical properties of the ceramics were investigated. The microstructure of the BCZT ceramics showed a core shell structure at compositions of x=0.03 and 0.06. The substitution of small amount of Ba²⁺ by Ca²⁺ resulted in an improvement of the piezoelectric, dielectric and ferroelectric properties of the ceramics. The orthorhombic–tetragonal phase transition was found in the composition of x≤0.03. Piezoelectric coefficient of d₃₃～392 pC/N and lowest E_c～3.3 kV/cm with highest P_r～14.1 μC/cm² were obtained for the composition of x=0.03 while its Curie temperature (T_C) was as high as 125 °C. However, the ferroelectric to paraelectric transition temperature had slightly shifted towards room temperature with increasing Ca²⁺ concentration.     

Enhancement of piezoelectric properties of BF–BT ceramics by using ZrO2 powder bed during the sintering process

ZrO₂ powders of various particle sizes (0.15, 0.7, 500 µm) were used to simulate loose powder bed sintering to prepare BF–BT piezoelectric ceramics. The phase structure, dielectric properties, ferroelectric properties, and piezoelectric properties were compared with the samples sintered by the conventional powder bed method (i.e., powder of the same composition as the sample). Results showed that the use of loose ZrO₂ powder bed could improve the heat conduction rate and the sintering quality of bulk BF–BT piezoelectric ceramics. The XPS results showed that the samples sintered with 500 µm ZrO₂ powder beds had the lowest concentration of Fe²⁺, exhibited the largest piezoelectric coefficients (d₃₃ = 201 pC/N). In contrast, the sample sintered with a conventional powder bed under the same sintering conditions had a piezoelectric coefficient d₃₃ of 156 pC/N.     

Relaxor Ferroelectric BaTiO3–Bi(Mg2/3Nb1/3)O3 Ceramics for Energy Storage Application

Perovskite solid solution ceramics of (1 ? x)BaTiO₃–xBi(Mg_2/3Nb_1/3)O₃ (BT–BMN) (x = 0.05–0.2) were synthesized by solid‐state reaction technique. The results show that the BMN addition could lower the sintering temperature of BT‐based ceramics. X‐ray diffraction results reveal a pure perovskite structure for all studied samples. Dielectric measurements exhibit a relaxor‐like characteristic for the BT–BMN ceramics, where broadened phase transition peaks change to a temperature‐stable permittivity plateau (from ?50°C to 300°C) with increasing the BMN content (x = 0.2), and slim polarization–electric field hysteresis loops were observed in samples with x ≥ 0.1. The dielectric breakdown strength and electrical resistivity of BT–BMN ceramics show their maxima of 287.7 kV/cm and 1.53 × 10¹³ Ω cm at x = 0.15, and an energy density of about 1.13 J/cm³ is achieved in the sample of x = 0.1.     

Phase Diagram and Properties of High TC/TR−T Pb(In1/2Nb1/2) O3–Pb(Zn1/3Nb2/3)O3–PbTiO3 Ferroelectric Ceramics

A ternary ferroelectric ceramic system, (1?x?y)Pb(In_1/2Nb_1/2)O₃–xPb(Zn_1/3Nb_2/3)O₃–yPbTiO₃ (PIN–PZN–PT, x = 0.21, 0.27, 0.36, 0.42), was prepared using a two‐step precursor method. The phase structure, dielectric, piezoelectric, and ferroelectric properties of the ternary ceramics were systematically investigated. A morphotropic phase boundary (MPB) was identified by X‐ray diffraction. The optimum piezoelectric and electromechanical properties were achieved for a composition close to MPB (0.5PIN–0.21PZN–0.29PT), where the piezoelectric coefficient d₃₃, planar electromechanical coupling factor k_p, and remnant polarization P_r are 660 pC/N,72%, and 45 μC/cm², respectively. The Curie temperature T_C and rhombohedral to tetragonal phase transition temperature T_R?T were also derived by temperature dependence of dielectric measurements. The strongly “bended” MPB in the PIN–PT system was found to be “flattened” after addition of PZN in the PIN–PT–PZN system. The results demonstrate a possibility of growing ferroelectric single crystals with high electromechanical properties and expanded range of application temperature.     

Remarkably High‐Temperature Stability of Bi(Fe1−xAlx)O3–BaTiO3 Solid Solution with Near‐Zero Temperature Coefficient of Piezoelectric Properties

The 0.72Bi(Fe_1?xAl_x)O₃–0.28BaTiO₃ (x = 0, 0.01, 0.03, 0.05, and 0.07, abbreviated as BFAx–BT) lead‐free high‐temperature ceramics were prepared by the conventional ceramic processing. Systematic investigation on the microstructures, crystalline structures, dielectric and piezoelectric properties, and high‐temperature stability of piezoelectric properties was carried out. The crystalline structures of BFAx–BT ceramics evolve from rhombohedral structure with x < 0.01 to the coexistence of rhombohedral structure and pseudocubic phases with x ≈ 0.01, finally to pseudocubic phases when x > 0.03. Remarkably high‐temperature stability with near‐zero temperature coefficient of piezoelectric properties (TCk_p), together with improved piezoelectric properties has been achieved for x = 0.01 BFAx–BT ceramics. The BFAx–BT(x = 0.01) ceramics simultaneously show the excellent piezoelectric properties of d₃₃ = 151 pC/N, k_p = 0.31 and super‐high‐temperature stability of T_d = 420°C, TCk_p = 1 × 10^?4. It is considered that the observed strong piezoelectricity and remarkably high‐temperature stability should be ascribed to the phase coexistence of rhombohedral and pseudocubic phases. The rhombohedral phases have a positive TCk_p value and the pseudocubic phases possess a negative TCk_p value. Thus, the TCk_p value of BFAx–BT ceramics can be tuned by composition of x.     

Microstructure and Electrical Properties of Nonstoichiometric 0.94(Na0.5Bi0.5+x)TiO3–0.06BaTiO3 Lead‐Free Ceramics

0.94(Na_0.5Bi_0.5+x)TiO₃–0.06BaTiO₃ (x = ?0.04, 0, 0.02; named NB_0.46T‐6BT, NB_0.50T‐6BT, NB_0.52T‐6BT, respectively) lead‐free piezoelectric ceramics were prepared via the solid‐state reaction method. Effects of Bi³⁺ nonstoichiometry on microstructure, dielectric, ferroelectric, and piezoelectric properties were studied. All ceramics show typical X‐ray diffraction peaks of ABO₃ perovskite structure. The lattice parameters increase with the increase in the Bi³⁺ content. The electron probe microanalysis demonstrates that the excess Bi₂O₃ in the starting composition can compensate the Bi₂O₃ loss induced during sample processing. The size and shape of grains are closely related to the Bi³⁺ content. For the unpoled NB_0.50T‐6BT and NB_0.52T‐6BT, there are two dielectric anomalies in the dielectric constant–temperature curves. The unpoled NB_0.46T‐6BT shows one dielectric anomaly accompanied by high dielectric constant and dielectric loss at low frequencies. After poling, a new dielectric anomaly appears around depolarization temperature (T_d) for all ceramics and the T_d values increase with the Bi³⁺ amount decreasing from excess to deficiency. The diffuse phase transition character was studied via the Curie–Weiss law and modified Curie–Weiss law. The activation energy values obtained via the impedance analysis are 0.69, 1.05, and 1.16 eV for NB_0.46T‐6BT, NB_0.50T‐6BT and NB_0.52T‐6BT, respectively, implying the change in oxygen vacancy concentration in the ceramics. The piezoelectric constant, polarization, and coercive field of the ceramics change with the variation in the Bi³⁺ content. The Rayleigh analysis suggests that the change in electrical properties of the ceramics with the variation in the Bi³⁺ amount is related to the effect of oxygen vacancies.     

Low‐temperature sintering and enhanced piezoelectric properties of random and textured PIN–PMN–PT ceramics with Li2CO3

Low‐temperature sintered random and textured 36PIN–30PMN–34PT piezoelectric ceramics were successfully synthesized at a temperature as low as 950°C using Li₂CO₃ as sintering aids. The effects of Li₂CO₃ addition on microstructure, dielectric, ferroelectric, and piezoelectric properties in 36PIN–30PMN–34PT ternary system were systematically investigated. The results showed that the grain size of the specimens increased with the addition of sintering aids. The optimum properties for the random samples were obtained at 0.5 wt% Li₂CO₃ addition, with piezoelectric constant d₃₃ of 450 pC/N, planar electromechanical coupling coefficient k_p of 49%, peak permittivity ε_max of 25 612, remanent polarization P_r of 36.3 μC/cm². Moreover, the low‐temperature‐sintered textured samples at 0.5 wt% Li₂CO₃ addition exhibited a higher piezoelectric constant d₃₃ of 560 pC/N. These results indicated that the low‐temperature‐sintered 36PIN–30PMN–34PT piezoelectric ceramics were very promising candidates for the multilayer piezoelectric applications.     

Enhanced structural,dielectric, ferroelectric,and piezoelectric properties of (1−x)Ba0.9Sr0.1TiO3–(x)Ba0.7Ca0.3TiO3 ceramics derived using mechano‐chemical activation technique

The effect of Ba_0.7Ca_0.3TiO₃ (BCT) substitution on the structural, dielectric, ferroelectric, and piezoelectric properties of mechano‐chemically synthesized lead‐free (1?x)Ba_0.9Sr_0.1TiO₃‐(x)Ba_0.7Ca_0.3TiO₃ (x=0.0, 0.10, 0.20, 0.35, and 0.50) ceramics have been investigated. XRD patterns confirms the formation of tetragonal phase with P4mm space group. The results indicate a strong influence of BCT substitution on the structural and electrical properties of Ba_0.9Sr_0.1TiO₃ (BST) ceramic. BST–BCT ceramic for x=0.35 have shown high dielectric constant ε_m~21 800, high remnant polarization P_r~10.16 μC/cm², large piezoelectric charge constant D₃₃~293 pC/N, large piezoelectric voltage constant g₃₃~5.80 mV·m/N, and highest dielectric breakdown strength E_bd~224 kV/cm among the five synthesized samples. The correlation between structural, dielectric, ferroelectric, and piezoelectric properties of the BST ceramic with increasing BCT content have been systematically described on the basis of domain wall motion and grain size effect.     

Properties and structures of nonstoichiometric (K,Na)NbO3‐based lead‐free ceramics

The 0.968[(K_0.48Na_0.52)]Nb_0.95+xSb_0.05O₃–0.032(Bi_0.5Na_0.5)ZrO₃ [KNN_xS–BNZ] lead‐free ceramics with nonstoichiometric niobium ion were fabricated via conventional solid‐state sintering technique and their piezoelectric, dielectric and ferroelectric properties were investigated. When x = 0.010, enhanced piezoelectric properties (d₃₃ ≈ 421 pC/N and k_p ≈ 0.47) were obtained due to the construction of rhombohendral—tetragonal phase boundary near room temperature. The KNN_xS–BNZ ceramics possesses enhanced Curie temperature (T_c) with improved piezoelectric constant. A large d₃₃ of ~421 pC/N and a high T_c ~256°C can be simultaneously induced in the ceramics with x = 0.010. Especially, good thermal stability was observed in a broad temperature range. The results indicated that our work could benefit development of KNN‐based ceramics and widen their application range.     

Microstructure,Ferroelectric, Piezoelectric,and Ferromagnetic Properties of Sc‐Modified BiFeO3–BaTiO3 Multiferroic Ceramics with MnO2 Addition

0.725BiFe_1?xSc_xO₃–0.275BaTiO₃ + y mol% MnO₂ multiferroic ceramics were fabricated by a conventional ceramic technique and the effects of Sc doping and sintering temperature on microstructure, multiferroic, and piezoelectric properties of the ceramics were studied. The ceramics can be well sintered at the wide low sintering temperature range 930°C–990°C and possess a pure perovskite structure. The ceramics with x/y = 0.01–0.02/1.0 sintered at 960°C possess high resistivity (~2 × 10⁹ Ω·cm), strong ferroelectricity (P_r = 19.1–20.4 μm/cm²), good piezoelectric properties (d₃₃ = 127–128 pC/N, k_p = 36.6%–36.9%), and very high Curie temperature (618°C–636°C). The increase in sintering temperature improves the densification, electric insulation, ferroelectric, and piezoelectric properties of the ceramics. A small amount of Sc doping (x ≤ 0.04) and the increase in the sintering temperature significantly enhance the ferromagnetic properties of the ceramics. Improved ferromagnetism with remnant magnetization M_r of 0.059 and 0.10 emu/g and coercive field H_c of 2.51 and 2.76 kOe are obtained in the ceramics with x/y = 0.04/1.0 (sintered at 960°C) and 0.02/1.0 (sintered at 1050°C), respectively. Because of the high T_C (636°C), the ceramic with x/y = 0.02/1.0 shows good temperature stability of piezoelectric properties. Our results also show that the addition of MnO₂ is essential to obtain the ceramics with good electrical properties and electric insulation.     

Enhanced ferroelectric and ferromagnetic properties of BiFeO3-PbTiO3 multiferroic solid solutions with Ba substitutions

Dense 0.6(Bi_0.9La_0.1)(Ga_0.05Fe_0.95)O₃-0.4(Pb_1-xBa_x)TiO₃ (BLGF-PBT, x = 0, 0.1, 0.2, 0.3, and 0.4) ceramics with different Ba contents were prepared by the solid-state reaction method, and effects of Ba contents on the structure and multiferroic properties were investigated. X-ray diffraction results indicate that the Ba-modified BLGF-PBT ceramics exhibit single perovskite structure without detectable secondary phases, and a transition from tetragonal phase to rhombohedral one takes place with the increase of Ba content. The piezoelectric constant d₃₃, remanent polarization P_r, and remanent magnetization M_r are improved by the Ba substitution simultaneously. Values of P_r, M_r, and d₃₃ of BLGF-PBT ceramics for the composition of x = 0.3 with the coexistence of tetragonal and rhombohedral phases are 20 μC/cm², 0.05 emu/g, and 256 pC/N, respectively, much higher than those without Ba modification. The significantly improved d₃₃ and M_r indicate that BLGF-PBT ceramics with Ba modification provide alternative materials for multifunctional devices.     

High‐temperature piezoelectric properties of 0‐3 type CaBi4Ti4O15:x wt%BiFeO3 composites

The 0‐3 type CaBi₄Ti₄O₁₅:30 wt%BiFeO₃ composite shows much better high‐temperature piezoelectric properties than the single‐phase CaBi₄Ti₄O₁₅ or BiFeO₃ ceramics. The composite with 0‐3 type connectivity exhibits a high density of 7.01 g/cm³, a saturated polarization of 21.5 μC/cm² and an enhanced piezoelectric d₃₃ of 25 pC/N. After the poled composite was annealed at 600°C, its d₃₃ is 21 pC/N at room temperature. Resistance of the composite decreases slowly from 10⁹ ohm at 20°C to ~10⁵ ohm at 500°C. Furthermore, the poled composite shows strong radial and thickness dielectric resonances at 20°C‐500°C.