Far‐Red‐Emitting BiOCl:Eu3+ Phosphor with Excellent Broadband NUV‐Excitation for White‐Light‐Emitting Diodes

Rare‐earth ion‐doped semiconducting phosphor has attracted extensive attention due to the ability to achieve efficient luminescence through the host sensitization. Here, we present a new type red‐emitting Eu³⁺ ‐doped BiOCl phosphors possessing a broad excitation band in the near‐ultraviolet (NUV) region. Experimental measurements and theoretical calculations confirm that Eu³⁺ ion dopants result in forming impurity energy level near valence band, and the excellent broadband NUV‐exciting ability of Eu³⁺ ion is due to the electronic transitions of BiOCl band gap. Moreover, the highest emission intensity of the phosphors is from the ⁵D₀ → ⁷F₄ transition of Eu³⁺ around 699 nm (far‐red) through whether host excitation or direct Eu³⁺ ions excitation, which lie in the particular structure of BiOCl crystals. Our results indicate that the Eu³⁺ ‐doped BiOCl crystals show great potential as red phosphors for white‐light‐emitting diodes.     

Eu2+‐Doped Yellow‐Emitting CsBaB3O6 Glass‐Ceramic Prepared by Melt Quenching and Re‐Crystallization Method

Eu³⁺‐doped cesium barium borate glass with the composition of Cs₂O·2BaO·3B₂O₃ was prepared by the conventional melt quenching method. The glass‐ceramic sample was obtained from the re‐crystallization of the as‐made glass to change the amorphous glass into a crystalline host. This reduces the Eu³⁺ in glass to Eu²⁺ ions resulting in a yellow‐emitting phosphor of Eu²⁺‐activated CsBaB₃O₆. The samples were investigated by the XRD patterns and SEM micrograph, the optical absorption, the photoluminescence spectra, and decay curves. The as‐made glass has only Eu³⁺ centers. Under the excitation of blue or near‐UV light, Eu²⁺‐doped CsBaB₃O₆ presents yellow‐emitting color from the allowed inter‐configurational 4f–5d transition in the Eu²⁺ ions. The maximum absolute luminescence quantum efficiencies of Eu²⁺‐doped CsBaB₃O₆ phosphor was measured to be 47% excited at 430 nm light at 300 K. By taking into account the efficient excitation in blue wavelength region, this new phosphor could be a potential yellow‐emitting phosphor for an application in white light‐emitting diodes fabricated with blue chips.     

Phase Transformation in Ca3(PO4)2:Eu2+ via the Controlled Quenching and Increased Eu2+ Content: Identification of New Cyan‐Emitting α‐Ca3(PO4)2:Eu2+ Phosphor

A case of phosphor is reported where the cooling rate parameter significantly influences the luminescence property. By quenching the sample after the high‐temperature solid‐state reaction at 1250°C, we successfully prepared the Eu²⁺‐doped α form Ca₃(PO₄)₂ (α‐TCP:Eu²⁺) as a new kind of bright cyan‐emitting phosphor. The unusual emission color variation (from cyan to blue) depends on the cooling rate after sintering and Eu²⁺ doping level as it was observed in the TCP‐based phosphors. By the Rietveld analysis, it is revealed that the cyan‐ and blue‐emitting phosphors are two different TCP forms crystallizing in the monoclinic (space group P2₁/a, α‐TCP) and the rhombohedral structure (space group R3c, β‐TCP), respectively. Upon 365 nm UV light excitation, α‐TCP:Eu²⁺ exhibits an asymmetric broad‐band cyan emission peaking at 480 nm, while β‐TCP:Eu²⁺ displays a relatively narrow‐band blue emission peaking at 416 nm. The Eu²⁺‐doping in Ca₃(PO₄)₂ shifts the upper temperature limit of the stable structural range of β form from 1125°C to ≥1250°C. Moreover, the crystal structures of α/β‐TCP:Eu²⁺ were compared in the aspects of compactness and cation site sets. The emission thermal stability of α/β‐TCP:Eu²⁺ was comparatively characterized and the difference was related to the specific host structural features.     

Phosphor‐in‐fluorescent‐glasses for high color rendering white light emitting diodes

Fluorescent glass frits were prepared and used to synthesize phosphor‐in‐fluorescent glass composites (PiFGs) to realize stable white light emitting diodes with high color‐rendering properties. Commercial red, green, and blue phosphors were co‐sintered and red phosphors were partially replaced by Eu³⁺ in glass frits. Phosphor‐in‐glass composites were placed on UV‐light emitting diodes (UV‐LEDs) to generate white light. Pure white light with a luminous efficacy=58.4 lm/W, general color rendering index R_a=87 and special color rendering index for strong red R₉=73 was realized with glass frits containing 7 mol% Eu₂O₃ and RGB ratio of 35:20:15. Luminous efficacy, R_a and R₉ increased as red phosphors were replaced by red‐fluorescent glass frits.     

Synthesis,structural characterization,and photoluminescence properties of Eu3+‐doped Mg3‐xEux(BO3)2 phosphor

Eu³⁺‐doped Mg_3‐xEu_x(BO₃)₂ (x = 0.000, 0.005, 0.010, 0.020, 0.050, and 0.100) phosphors were synthesized for the first time by solution combustion synthesis method, which is a fast synthesis method for obtaining nano‐sized borate powders. The optimization of the synthesis conditions of phosphor materials was performed by TG/DTA method. These phosphors were characterized by XRD, FTIR, SEM‐EDX, and photoluminescence, PL analysis. The XRD analysis exhibited that all of the prepared ceramic compounds have been crystallized in orthorhombic structure with space group Pnnm. Also, the influence of europium dopant ions on unit cell parameters of host material was analyzed using Jana2006 program and the crystalline size was determined by Debye‐Scherrer's formula. The luminescence properties of all Eu³⁺‐doped samples were investigated by excitation and emission spectra. The excitation spectra of Mg_3‐xEu_x(BO₃)₂ phosphors show characteristic peak at 420 nm in addition to other characteristic peaks of Eu³⁺ under emission at 613 nm. The emission spectra of Eu³⁺‐doped samples indicated most intensive red emission band dominated at 630 nm belonging to ⁵D₀→⁷F₂ magnetic dipole transition. Furthermore, the optimum or quenching concentration of Eu³⁺ ion has been determined as x = 0.010 showed the maximum emission intensity when it was excited at 394 nm.     

Synthesis and luminescence properties of single‐component Ca5(PO4)3F:Dy3+, Eu3+ white‐emitting phosphors

A series of Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors was synthesized by a solid‐state reaction method. The XRD results show that all as‐prepared Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ samples match well with the standard Ca₅(PO₄)₃F structure and the doped Dy³⁺ and Eu³⁺ ions have no effect on the crystal structure. Under near‐ultraviolet excitation, Dy³⁺ doped Ca₅(PO₄)₃F phosphor shows blue (486 nm) and yellow (579 nm) emissions, which correspond to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions respectively. Eu³⁺ co‐doped Ca₅(PO₄)₃F:Dy³⁺ phosphor shows the additional red emission of Eu³⁺ at 631 nm, and an improved color rendering index. The chromaticity coordinates of Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors also indicate the excellent warm white emission characteristics and low correlated color temperature. Overall, these results suggest that the Ca₅(PO₄)₃F:Dy³⁺, Eu³⁺ phosphors have potential applications in warm white light‐emitting diodes as single‐component phosphor.     

Structure and Luminescence Characteristics of Eu3+‐Activated Trigonal Layered Perovskite Ba2La2ZnW2O12

Eu³⁺‐doped tungstate Ba₂La₂ZnW₂O₁₂ phosphors with perovskite‐structure were prepared by the high temperature solid‐state reaction. The X‐ray powder diffraction (XRD) patterns and structure refinements indicate that the phosphors crystalized in the trigonal layer‐perovskite. The luminescence properties of the phosphors were investigated such as photoluminescence (PL) excitation and emission spectra, decay lifetimes, and color coordinates. It was found that the pure host shows self‐activated emission excited by the UV light. Moreover, Ba₂La₂ZnW₂O₁₂ also shows scintillation characteristics under the X‐ray irradiation. The near‐UV and blue light can efficiently excite Eu³⁺‐doped Ba₂La₂ZnW₂O₁₂ phosphors inducing the strong orange–red luminescence. The optimal Eu³⁺ doping concentration in this host is 40 mol%. The luminescence spectra and the luminescence color of the phosphors strongly depend on the doping levels and excitation wavelength. The different luminescence features were discussed on the base of crystal structure. Eu³⁺ ions have two possible substitutions on A or B sites in this trigonal layered perovskite. The phosphor could act as a candidate for the potential application in near‐UV excited white‐LEDs lighting.     

A Novel Blue‐Emitting Phosphor of Eu2+‐Activated Magnesium Haloborate Mg3B7O13Cl

Eu²⁺‐doped magnesium haloborate Mg₃B₇O₁₃Cl was synthesized by the conventional high‐temperature solid‐state reaction. The phase formation was confirmed by X‐ray powder diffraction (XRD) measurements and structure refinement. The photoluminescence excitation and emission spectra, and decay curves were measured. Under the excitation of near‐UV light, Eu²⁺‐doped Mg₃B₇O₁₃Cl presents a narrow blue‐emitting band centered at 423 nm. The maximum absolute quantum efficiency (QE) of Mg₃B₇O₁₃Cl:Eu²⁺ phosphor was measured to be 80% excited at 385 nm light at 300 K. The thermal stability of the blue luminescence was evaluated by the luminescence decays as a function of temperature. The phosphor shows an excellent thermal stability on temperature quenching effects. Moreover, Mg₃B₇O₁₃Cl:Eu²⁺ phosphor shows scintillation characteristics excited by X‐ray irradiation at room temperature and presents a blue luminescence band with a fast lifetime of 600 ns.     

A novel dazzling Eu3+‐doped whitlockite‐type phosphate red‐emitting phosphor for white light‐emitting diodes

A series of novel red‐emitting Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors were successfully synthesized using the high‐temperature solid‐state reaction method. The crystal structure, photoluminescence spectra, thermal stability, and quantum efficiency of the phosphors were investigated as a function of Eu³⁺ concentration. Detailed analysis of their structural properties revealed that all the phosphors could be assigned as whitlockite‐type β‐Ca₃(PO₄)₂ structures. Both the PL emission spectra and decay curves suggest that emission intensity is largely dependent on Eu³⁺ concentration, with no quenching as the Eu³⁺ concentration approaches 100%. A dominant red emission band centered at 611 nm indicates that Eu³⁺ occupies a low symmetry sites within the Ca₈ZnLa(PO₄)₇ host lattice, which was confirm by Judd‐Ofelt theory. Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors exhibited good color coordinates (0.6516, 0.3480), high color purity (~96.3%), and high quantum efficiency (~78%). Temperature‐dependent emission spectra showed that the phosphors possessed good thermal stability. A white light‐emitting diode (LED) device were fabricated by integrating a mixture of obtained phosphors, commercial green‐emitting and blue‐emitting phosphors into a near‐ultraviolet LED chip. The fabricated white LED device emits glaring white light with high color rendering index (83.9) and proper correlated color temperature (5570 K). These results demonstrate that the Ca₈ZnLa_1?xEu_x(PO₄)₇ phosphors are a promising candidate for solid‐state lighting.     

Synthesis and Luminescence Properties of Blue‐Emitting Phosphor Eu2+‐Doped Zinc Fluoro‐Phosphate Zn2[PO4]F

Eu²⁺‐doped zinc fluoro‐phosphate Zn₂[PO₄]F was synthesized by the conventional high‐temperature solid‐state reaction. The phase formation was confirmed by X‐ray powder diffraction measurements and the structure refinement. The photoluminescence excitation and emission spectra, and the decay curves were measured. The natures of the Eu²⁺ emission in inorganic hosts, e.g., the emission and excitation properties, the chromaticity coordinates, the Stokes shifts, the absolute quantum efficiency, and the luminescence thermal stability were reported. Under the excitation of near‐UV light, Eu²⁺‐doped Zn₂[PO₄]F presents a narrow blue‐emitting band centered at 423 nm. The thermal stability of the blue luminescence was evaluated by the luminescence intensities as a function of temperature. The phosphor shows an excellent thermal stability on temperature quenching effects.     

Homogeneous Precipitation Synthesis and Low‐Voltage Cathodoluminescence of SnO2:Eu3+ Phosphors for Field Emission Displays

A reddish‐orange‐emitting SnO₂:Eu³⁺ phosphor for field emission displays (FEDs) was successfully synthesized via a homogeneous precipitation route using urea as a precipitant. The influences of the dopant concentration of Eu³⁺ and calcination temperature on optical properties were investigated. The low‐voltage field emission properties of the FED device prepared using the synthesized SnO₂:Eu³⁺ phosphors were reported. Under the UV light, SnO₂:Eu³⁺ phosphors display the strong orange–red emission peaked at 587, 591, and 597 nm due to the ⁵D₀→⁷F₁ magnetic dipole transition of Eu³⁺. The phosphor doped with 1.0 mol% Eu³⁺ possesses the highest photoluminescent (PL) intensity. Under the low‐voltage excitation of 300 V, the fabricated FED device exhibits the bright orange–red emission, high‐voltage brightness saturation, and high color purity, which has a potential application in low‐voltage full color FEDs.     

Novel Broadband Excited and Linear Red‐Emitting Ba2Y(BO3)2Cl: Ce3+, Tb3+, Eu3+ Phosphor: Luminescence and Energy Transfer

A series of Ce³⁺, Tb³⁺, Eu³⁺ tri‐doped Ba₂Y(BO₃)₂Cl red‐emitting phosphor have been synthesized by solid‐state method. The Ce³⁺→Tb³⁺→Eu³⁺ energy‐transfer scheme has been proposed to realize the sensitization of Eu³⁺ ion emission by Ce³⁺ ions. Following this energy‐transfer model, near‐UV convertible Eu³⁺‐activated red phosphors have been obtained in Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ phosphors. Energy transfers from Ce³⁺ to Tb³⁺, and Tb³⁺ to Eu³⁺, as well as corresponding energy‐transfer efficiencies are investigated. The combination of narrow‐line red emission and near‐UV broadband excitation makes Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ as a novel and efficient red phosphor for NUV LED applications.     

LiCaAlN2:Eu3+/Tb3+: Red and green phosphors for LEDs and FEDs with charge transfer transition in n‐UV region

LiCaAlN₂:Eu³⁺/Tb³⁺ red/green phosphors were successfully prepared by conventional solid‐state reaction. The photoluminescence (PL) properties and cathodoluminescence (CL) properties of LiCaAlN₂:Eu³⁺/Tb³⁺ were investigated in detail. The Eu³⁺ (Tb³⁺) doped LiCaAlN₂ shows red (green) emission peaking at 615 nm (550 nm). Monitored at 615 nm (550 nm), it is interesting to found that LiCaAlN₂:Eu³⁺ (LiCaAlN₂:Tb³⁺) has a broad charge transfer transition in the range of 350‐450 nm (275‐375 nm) peaking at 380 nm (343 nm), which can be efficiently excited by n‐UV light‐emitting diodes (LEDs). Under electron beam excitation, LiCaAlN₂:Tb³⁺ exhibited a good resistance to the current saturation. The white LED has also been fabricated with blue, green, and LiCaAlN₂:Eu³⁺ red phosphor. The results indicate that LiCaAlN₂:Eu³⁺/Tb³⁺ could be conducive to the development of phosphor‐converted LEDs and field emission displays (FEDs).     

A single‐phase full‐color emitting phosphor Na3Sc2(PO4)3:Eu2+/Tb3+/Mn2+ with near‐zero thermal quenching and high quantum yield for near‐UV converted warm w‐LEDs

A single‐phase full‐color emitting phosphor Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ has been synthesized by high‐temperature solid‐state method. The crystal structure is measured by X‐ray diffraction. The emission can be tuned from blue to green/red/white through reasonable adjustment of doping ratio among Eu²⁺/Tb³⁺/Mn²⁺ ions. The photoluminescence, energy‐transfer efficiency and concentration quenching mechanisms in Eu²⁺‐Tb³⁺/Eu²⁺‐Mn²⁺ co‐doped samples were studied in detail. All as‐obtained samples show high quantum yield and robust resistance to thermal quenching at evaluated temperature from 30 to 200°C. Notably, the wide‐gamut emission covering the full visible range of Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ gives an outstanding thermal quenching behavior near‐zero thermal quenching at 150°C/less than 20% emission intensity loss at 200°C, and high quantum yield‐66.0% at 150°C/56.9% at 200°C. Moreover, the chromaticity coordinates of Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ keep stable through the whole evaluated temperature range. Finally, near‐UV w‐LED devices were fabricated, the white LED device (CCT = 4740.4 K, Ra = 80.9) indicates that Na₃Sc₂(PO₄)₃:Eu²⁺/Tb³⁺/Mn²⁺ may be a promising candidate for phosphor‐converted near‐UV w‐LEDs.     

Preparation and Luminescence Properties of Blue‐emitting Phosphor Ba2Ca(PO4)2:Eu2+

Using the conventional high temperature solid‐state reaction method Ba₂Ca(PO₄)₂:Eu²⁺ phosphors were prepared. The phase structure, photoluminescence (PL) properties, and the PL thermal stability of the samples were investigated, respectively. Under the excitation at 365 nm, the phosphor exhibited an asymmetric broad‐band blue emission with peak at 454 nm, which is ascribed to the 4f–5d transition of Eu²⁺. It was further proved that the dipole–dipole interactions results in the concentration quenching of Eu²⁺ in Ba₂Ca_1?x (PO₄)₂:xEu²⁺ phosphors. When the temperature turned up to 150°C, the emission intensity of Ba₂Ca_0.99(PO₄)₂:0.01Eu²⁺ phosphor was 59.07% of the initial value at room temperature. The activation energy ΔE was calculated to be 0.30 eV, which proved the good thermal stability of the sample. All the properties indicated that the blue‐emitting Ba₂Ca(PO₄)₂:Eu²⁺ phosphor has potential application in white LEDs.     

Eu3+‐doped glass as a color rendering index enhancer in phosphor‐in‐glass

A new method for improving color rendering index (CRI) and low correlated color temperature (CCT) in high‐power white‐light‐emitting diodes (WLEDs) is proposed. We used a configuration of phosphor‐in‐glass (PIG) and studied light output changes with the increment in concentration of yellow‐emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) phosphor. The PIG was coupled on the top of blue‐light‐emitting diodes (LED) chip (465 nm). To compensate the lack of red emission in the phosphor, Eu³⁺‐doped tellurium glass with different europium content was employed as a red emitter. The suitable contents of YAG:Ce³⁺ and Eu³⁺ were 7.5 weight percent (wt%) and 3 mol percent (mol%), respectively. The CRI value went from 72 to 82, whereas the CCT was reduced from 24 933 to 6434 K. The proposed structure can improve CCT as well as CRI of WLEDs just by placing a glass on top.     

A novel Eu3+‐ and self‐activated vanadate phosphor of Ca4La(VO4)3O with oxyvanadate apatite structure

Pure and Eu³⁺‐activated Ca₄La(VO₄)₃O phosphors were prepared via three‐step solid‐phase synthesis. The phase formation and structure were investigated by X‐ray diffraction (XRD) with Rietveld refinements. All the samples crystallized in an apatite‐type structure. The morphological properties were measured via by SEM and EDS measurements. Ca₄La(VO₄)₃O is a new vanadate optical material with a direct band feature and a band energy of 3.1 eV. The undoped Ca₄La(VO₄)₃O phosphor presents self‐activated yellow luminescence from 400 nm to 750 nm with a maximum wavelength of 525 nm originating from VO₄ groups. Luminescence characteristics of Ca₄La(VO₄)₃O indicate that the phosphor is not sufficient for practical applications. In Eu³⁺‐activated Ca₄La(VO₄)₃O, there is an efficient energy transfer from VO₄ to Eu³⁺ ions. The luminescence spectra, concentration quenching, decay curves, color chromaticity, and quantum efficiencies (QE) of Ca₄La(VO₄)₃O:Eu³⁺ were investigated. The phosphor presents optimal Eu³⁺ doping concentration of about 20 mol%. The dominant red emission in Ca₄La(VO₄)₃O:Eu³⁺ is 615 nm from electronic ⁵D₀→⁷F₂ dipole transitions. The quantum efficiency and the luminescence stability of the pure and Eu‐activated Ca₄La(VO₄)₃O were reported. The luminescence was discussed on the structural characteristics.     

Crystal structure and luminescence properties of a single‐component white‐light‐emitting phosphor Ca8ZnLa(PO4)7:Eu2+,Mn2+

A series of novel green emission Whitlockite‐type Ca₈ZnLa(PO₄)₇:Eu²⁺ and color tunable Ca₈ZnLa(PO₄)₇:Eu²⁺,Mn²⁺ phosphors were prepared by the solid‐state reaction method in a reducing atmosphere. Its crystal structure and phase composition were identified by high‐resolution transmission electron microscopy, selected area electronic diffraction, X‐ray photoelectron spectroscopy, and X‐ray powder diffraction Rietveld refinement, and it was found to be trigonal, belonging to R‐3c(161) space group. The luminescence properties of Eu²⁺ singly doped and Eu²⁺/Mn²⁺ codoped Ca₈ZnLa(PO₄)₇ phosphors were revealed in detail. Ca₈ZnLa(PO₄)₇:Eu²⁺ is excitable over a broad range from 200 to 450 nm with a prominent green emitting. With varied Eu²⁺/Mn²⁺ ratios, fine‐tune emission under 365 nm excitation can be achieved from green (0.221, 0.468) to magenta (0.391, 0.276), especially the warm white light (0.392, 0.352), and CCT 3500 K can be obtained by the process of energy transfer between Eu²⁺ and Mn²⁺. The ET mechanism in this system is managed via the dipole‐dipole interaction with the maximum energy‐transfer efficiency 82.8% based on the decay lifetime data. These results suggest that as‐prepared phosphors can serve as promising candidates of UV‐pumped w‐LEDs.     

Synthesis and photoluminescence enhancement of Ca3Sr3(VO4)4:Eu3+ red phosphors by co-doping with La3+

In this study, a series of red-emitting Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphors co-doped with La³⁺ was prepared using the combustion method. The microstructures, morphologies, and photoluminescence properties of the phosphors were investigated. All Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ samples synthesized at temperatures greater than 700 ℃ exhibited the same standard rhombohedral structure of Ca₃Sr₃(VO₄)₄. Furthermore, the Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ phosphor was effectively excited by near-ultraviolet light of 393 nm and blue light of 464 nm. The strong excitation peak at 464 nm corresponded to the ⁷F₀→⁵D₂ electron transition of Eu³⁺. The strong emission peak observed at 619 nm corresponded to the ⁵D₀→⁷F₂ electron transition of Eu³⁺. Co-doping with La³⁺ significantly improved the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺ red phosphors. The optimum luminescence of the phosphor was observed at Eu³⁺ and La³⁺ concentrations of 5% and 6%, respectively. Moreover, co-doping with La³⁺ also improved the fluorescence lifetime and thermal stability of the Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphor. The CIE chromaticity coordinate of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ was closer to the NTSC standard for red phosphors than those of other commercial phosphors; moreover, it had greater color purity than that of all the samples tested. The red emission intensity of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ at 619 nm was ~1.53 times that of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺ and 2.63 times that of SrS:Eu²⁺. The introduction of charge compensators could further increase the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ red phosphors. The phosphors synthesized herein are promising red-emitting phosphors for applications in white light-emitting diodes under irradiation by blue chips.     

Photoluminescence Properties of Heavily Eu3+‐Doped BaCa2In6O12 Phosphor for White‐Light‐Emitting Diodes

Heavily Eu³⁺‐doped BaCa₂In₆O₁₂ phosphors were prepared by conventional solid‐state reaction, and its structural properties were investigated by means of Rietveld refinement method using an X‐ray source. XRD patterns confirm the hexagonal phase of BaCa₂In₆O₁₂: Eu³⁺ phosphors. The obtained spectrum data indicate that the emission spectra of Ba_1?xEu_xCa₂In₆O₁₂ samples excited at 393 nm exhibit a series of shaped peaks assigned to the ⁵D_0,1,2,3 →⁷F_J (J = 0,1,2,3,4) transitions. Luminescence from the higher excited states, such as ⁵D₁, ⁵D₂, and ⁵D₃, were also observed even though the Eu³⁺ concentration was up to x = 0.4. More importantly, the Ba_1?xEu_xCa₂In₆O₁₂ phosphor still emits white luminescence, when the Eu³⁺ ion concentration is up to x = 0.07 before concentration quenching is observed, which shows that the phosphor is a promising single‐phase phosphor for near ultraviolet (NUV) light‐emitting diodes (LED). Furthermore, the temperature's impact on white luminescent properties was studied. Finally, a white‐light‐emitting diodes (W‐LEDs) fabricated with the Ba_0.95Eu_0.05Ca₂In₆O₁₂ phosphor incorporated with an encapsulant in ultraviolet LEDs (λ_max = 395 nm) is discussed.