A Single‐Phased Sr1−y‐3x/2Al2Si2O8: xCe3+, yMn2+ with Efficient Energy Transfer as a Potential Phosphor for White‐Light‐Emitting Diodes

A series of Ce³⁺‐ and Mn²⁺‐(co‐)activated SrAl₂Si₂O₈ phosphors have been prepared at 1350°C under a reducing atmosphere and their photoluminescence properties have been studied as a function of the (co‐)dopant ions concentrations. We have discovered that energy transfer (ET) not only from Ce³⁺ to Mn²⁺ but also from “defects” to Mn²⁺ by the facts that there is existing significant overlap between the emission spectrum of Ce³⁺ (“defects”) and the excitation spectrum of Mn²⁺. The source of the “defects” in the host lattice is originated from the different charge substitution between Ce³⁺ and Sr²⁺. By adopting the principle of ET, the material SrAl₂Si₂O₈: Ce, Mn can act as a phosphor for white‐light ultraviolet light‐emitting diodes (UV‐LEDs) by tuning of the dopants contents.     

Luminescence properties and energy transfer investigations of Sr2B2O5:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The luminescent properties of Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were investigated by using the photoluminescence emission, excitation spectra and reflectance spectra, respectively. The excitation spectra indicate that this phosphor can be effectively excited by near ultraviolet (n-UV) light of 317 nm. Under the excitation of 317 nm, Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. The Reflectance spectra of the Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors are noted that combine with Ce³⁺ and Tb³⁺ ion absorptions. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in Sr₂B₂O₅ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 90%. The phosphor Sr₂B₂O₅:Ce³⁺,Tb³⁺ could be considered as one of double emission phosphor for n-UV excited white light emitting diodes.     

Photoluminescence of Sr2P2O7:Sm3+ Phosphor as Reddish Orange Emission for White Light‐Emitting Diodes

A reddish orange emission Sr₂P₂O₇:Sm³⁺ phosphor is prepared by the solid‐state reaction method in air, and the crystal structure and luminescence properties of phosphors are investigated. Sr₂P₂O₇:Sm³⁺ phosphor shows Commission International de I'Eclairage (CIE) chromaticity coordinates (x = 0.5753, y = 0.4147). White light‐emitting diodes (W‐LEDs) fabricated using Sr₂P₂O₇:Sm³⁺ phosphor etc. show CIE chromaticity coordinates (x = 0.3471, y = 0.3124). These results indicate that Sr₂P₂O₇:Sm³⁺ phosphor could be a potential suitable reddish orange emitting phosphor candidate for W‐LEDs with excitation of a ~400 nm n‐UV LED chip.     

Decay Behavior in Ce3+‐doped La3Si6N11 and Lu3Al5O12 Phosphors

Ce³⁺‐activated light emitting diode (LED) phosphors have been extensively examined for photoluminescence, and have been the focus of many detailed structural studies. However, reports of the decay curves of Ce³⁺‐activated LED phosphors are rare. Although we have reported the decay behaviors of several Eu²⁺‐activated LED phosphors such as Sr₂SiO₄, Sr₂Si₅N₈, and CaAlSiN₃, we have never conducted an in‐depth study into the decay behavior for Ce³⁺‐activated LED phosphors. For this study, we investigated the decay curves of well‐known Ce³⁺‐activated LED phosphors such as La₃Si₆N₁₁ and Lu₃Al₅O₁₂. Similar to Eu²⁺‐activated LED phosphors, the decay behavior of Ce³⁺‐activated LED phosphors was sensitive to the Ce³⁺ concentration and to the detection wavelength. There was active nonradiative energy transfer between the Ce³⁺ activators located at different sites.     

Effect of H3BO3 flux on the morphology and optical properties of Sr2MgAl22O36:Mn4+ red phosphors for agricultural light conversion films

H₃BO₃ was added during the preparation of Sr₂MgAl₂₂O₃₆:Mn⁴⁺ phosphors by a high-temperature solid-state reaction method. The influence of H₃BO₃ flux on the crystal structure, particle morphology and photoluminescence properties of the Sr₂MgAl₂₂O₃₆:Mn⁴⁺ phosphors was investigated by employing X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectroscopy, respectively. The results indicate that adding H₃BO₃ flux can improve the luminescence intensity and morphology, and reduce the synthesis temperature of the Sr₂MgAl₂₂O₃₆ phosphor. The formation temperature of pure-phase Sr₂MgAl₂₂O₃₆ was significantly decreased when H₃BO₃ flux as introduced. The excited state lifetime of the Sr₂MgAl₂₂O₃₆:1.2 mol% Mn⁴⁺ phosphor by the addition of 2.0 wt% H₃BO₃ was ~1.02 ms. We demonstrated the potential of these phosphors to enhance sunlight harvesting by agricultural light conversion film testing. We propose that films containing the Sr₂MgAl₂₂O₃₆:1.2 mol% Mn⁴⁺ phosphor can be applied to increase the production of agricultural plants.     

Improvement of Luminescence Properties of Blue‐to‐Red Emitting NaCaBO3: Ce3+, Mn2+ Phosphor Prepared by Sol–Gel Method

Color‐tunable phosphors NaCaBO₃: Ce³⁺, Mn²⁺ were synthesized by sol–gel (SG) and solid state (SS) method. SEM observation indicated that the microstructure of phosphor (SG) consisted of regular fine grains with an average size of about 5 μm. NaCaBO₃: Ce³⁺, Mn²⁺ showed two emission bands: one at 425 nm for Ce³⁺ and another at 610 nm for Mn²⁺. NaCaBO₃: Ce³⁺, Mn²⁺ (SG) exhibit higher energy‐transfer efficiency (90%) and higher Mn²⁺ quantum efficiency (80%) than SS samples, due to smooth surface, narrow size distribution, and improved homogeneity of sensitizer/activator ions. NaCaBO₃: Ce³⁺, Mn²⁺ exhibits blue‐to‐red tunable color by changing Ce³⁺/Mn²⁺ ratio.     

Photoluminescence properties of Ce3+/Mn2+ doped calcium zirconium silicate phosphors with energy transfer for white LEDs

A series of Ce³⁺ doped and Ce³⁺/Mn²⁺ co-doped calcium zirconium silicate CaZrSi₂O₇ (CZS) phosphors have been synthesized via conventional high temperature solid state reactions. The luminescence properties, energy transfer between Ce³⁺ and Mn²⁺ have been investigated systematically. Under 320 nm excitation, the phosphor CZS: 0.05Ce³⁺ exhibit strong blue emission ranging from 330 nm to 500 nm, attributed to the spin-allowed 5d-4f transitions of Ce³⁺ ions. There are two different emission centers of Ce³⁺ ions, Ce³⁺(I) and Ce³⁺(II). The emission spectra of Ce³⁺, Mn²⁺ co-doped phosphors shows a broad emission around 550 nm corresponding to the ⁴T₁(⁴G)-⁶A₁(⁶S) spin-forbidden transition of Mn²⁺. The energy transfer between Ce³⁺ and Mn²⁺ is detected and the transfer efficiency of Ce³⁺(II) to Mn²⁺ is faster than that of Ce³⁺(I) to Mn²⁺. The resonant type is identified via dipole-dipole mechanism. Additionally, a blue-shift emission of Ce³⁺ and a red-shift emission of Mn²⁺ have been observed following the increase of Mn²⁺ content in relation to the energy transfer. Thermal quenching has been investigated and the emission spectra show a blue-shift with the temperature increases, which have been discussed in details. CZS: 0.05Ce³⁺, yMn²⁺ phosphors can be tuned from blue to white and even to yellow by adjusting the Mn²⁺ content. All the results indicate that CZS: Ce³⁺, Mn²⁺ phosphor have a potential application for near-UV LEDs.     

Crystal Structure and Optical Performance of Al3+ and Ce3+ Codoped Ca3Sc2Si3O12 Green Phosphors for White LEDs

Ca₃Sc₂Si₃O₁₂:Ce³⁺ (CSS:Ce) green phosphors used for white light‐emitting diodes (LEDs) are synthesized and codoped with Al³⁺ via a solid‐state reaction method. The crystal structure and vibrational modes are analyzed by X‐ray diffraction, Fourier transform infrared spectroscopy, and Raman scattering spectroscopy. The energy transfer behavior and optical performance are characterized by photoluminescence and excitation spectra, quantum efficiency, and time‐resolved photoluminescence. The incorporation of Al³⁺ into CSS:Ce can inhibit the formation of the impurity phases Sc₂O₃ and CeO₂, improve crystallinity, and enhance the photoluminescence intensity as well as quantum efficiency. The substitution of Sc³⁺ with Al³⁺ increased the crystal field splitting of Ce³⁺ and resulted in the red shift of photoluminescence. The results show that Ca₃Sc_2?xAl_xSi₃O₁₂:Ce³⁺ has high quantum efficiency, making it a promising green phosphor that can be collocated with a commercial 450 nm blue LED and a red phosphor for solid‐state lighting applications.     

Partial cation substitution of tunable blue-cyan-emitting Ba2B2O5:Ce3+ for near-UV white LEDs

In this study, Sr²⁺, Ca²⁺, Zn²⁺, and Mg²⁺ ions act to tune the emission band to the blue-cyan region in Ba_xSr_yB₂O₅:Ce³⁺ (BSBO), Ba_xCa_zB₂O₅:Ce³⁺ (BCBO), Ba_xZn_uB₂O₅:Ce³⁺ (BZBO), and Ba_xMg_vB₂O₅:Ce³⁺ (BMBO) phosphors. A red shift occurs with the increase of Sr²⁺, Ca²⁺, Zn²⁺, and Mg²⁺ concentration, and a blue shift occurs when the concentrations of Sr²⁺, Ca²⁺, Zn²⁺, and Mg²⁺ exceed the critical value. The emission color can be tuned from deep blue (0.15, 0.12) to cyan (0.16, 0.27) upon 365 nm UV lamp excitation due to the crystal field splitting and centroid shifts. The excitation band shift to long wavelength by introducing ions, so that the synthesized phosphor can be better matched with the n-UV chip. The emission intensity slowly decreases with the temperature increasing. Therefore, the BMBO:Ce³⁺, BZBO:Ce³⁺, BCBO:Ce³⁺, and BSBO:Ce³⁺ phosphors with relatively good thermal stability were synthesized, which could have potential applications in the n-UV white LEDs.     

Luminescent properties of a novel afterglow phosphor Sr3Al2O5Cl2:Eu,Ce

A series of Eu²⁺ and Ce³⁺ doped/co-doped Sr₃Al₂O₅Cl₂ afterglow phosphors that presented various bright colors were successfully synthesized via high temperature solid state reaction. The structure and luminescence properties of the obtained samples were characterized by X-ray powder diffraction (XRD), photoluminescence (PL) spectra and decay curves as well as the thermoluminescence (TL) glow curves. The XRD results showed that all the phase could be indexed to the orthorhombic structure with the space group P2₁2₁2₁. After being exposed to a 254 nm or 365 nm mercury lamp, blue/yellow-orange afterglow emissions with broad bands peaking around 620 nm/435 nm, which were ascribed to the characteristic 4f⁶5d–4f⁷/5d¹–4f¹ transitions of Eu²⁺/Ce³⁺, could be observed in phosphors of Sr₃Al₂O₅Cl₂:Eu²⁺/Sr₃Al₂O₅Cl₂:Ce³⁺, respectively. Because of the overlap spectral range between the Sr₃Al₂O₅Cl₂:Eu²⁺ and Sr₃Al₂O₅Cl₂:Ce³⁺ phosphors, the energy transfer (ET) from Ce³⁺ to Eu²⁺ occurred. The related ET process was discussed in detail. Moreover, the incorporation of Ce³⁺ could significantly prolong the afterglow duration of Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor, which was due to the increase of trap concentration. Consequently, 6 h of the afterglow duration could be observed in Sr₃Al₂O₅Cl₂:1.0%Eu²⁺, 0.5%Ce³⁺ sample, exhibiting much longer than that of Sr₃Al₂O₅Cl₂: 1.0%Eu²⁺ (3 h). From the afterglow decay curves and the fitting results, the optimal concentration of Ce³⁺ for the enhanced afterglow property was experimentally determined to be 0.5%.     

The electronic structure,site occupancy and luminescent properties of Ce3+-activated Li2Ca2Si2O7 blue phosphor

Rare earth activated lithium-containing alkaline earth silicates is an intensely studied topic in the fields of luminescent materials. In this study, a cerium-activated lithium-silicate blue phosphor, Li₂Ca₂Si₂O₇:Ce³⁺, was explored using structural computational simulations and systematic experiments. The Li₂Ca₂Si₂O₇:Ce³⁺ phosphor can be efficiently excited by near-ultraviolet and cathode ray light sources. According to the spectroscopic redshift theory, time-resolved photoluminescence (TRPL) and cathodoluminescence (CL) spectra, it is determined that the broad emission of Li₂Ca₂Si₂O₇:Ce³⁺ comes from two different luminescent centers. In addition, Li₂Ca₂Si₂O₇:Ce³⁺ exhibits strong blue emission at ~415 nm with high quantum yield and stable emission under high temperature and continuous electron beam bombardment. Therefore, this study provides a new insight into developing new high-efficiency and high-purity trichromatic phosphors.     

Photoluminescence and energy transfer of efficient and thermally stable white-emitting Ca9La(PO4)7:Ce3+, Tb3+, Mn2+ phosphors

The development of novel single-component white-emitting phosphors with high thermal stability is essential for improving the illumination quality of white light-emitting diodes. In this work, we synthesized a series of Ce³⁺, Tb³⁺, Mn²⁺ single- and multiple-doped Ca₉La(PO₄)₇ (CLPO) phosphors with β-Ca₃(PO₄)₂-type structure by the simple high-temperature solid-state reaction. The crystallization behavior, crystal structure, surface morphology, photoluminescence performance, decay lifetime and thermal stability were systematically investigated. The PL spectra and decay curves have evidenced the efficient energy transfer from Ce³⁺ to Tb³⁺ and from Ce³⁺ to Mn²⁺ in the CLPO host, and corresponding energy transfer efficiency reaches 41.8% and 54.1%, respectively. The energy transfer process of Ce³⁺→Tb³⁺ and Ce³⁺→Mn²⁺ can be deduced to the resonant type via dipole-dipole and dipole-quadrupole interaction mechanism, and corresponding critical distance were determined to be 12.23 and 14.4 Å, respectively. Based on the efficient energy transfer, the white light emission can be successfully achieved in the single-component CLPO:0.15Ce³⁺, 0.10Tb³⁺, 0.04Mn²⁺ phosphor, which owns CIE chromaticity coordinates of (0.3245, 0.3347), CCT of 5878 K, internal and external quantum efficiency of 84.51% and 69.32%. Especially, compared with the emission intensity at 25 °C, it still remains 98.5% at 150 °C and 92.0% at 300 °C. Based on these results, the single-component white light emission phosphor CLPO:0.15Ce³⁺, 0.10Tb³⁺, 0.04Mn²⁺ is a potential candidate for UV-converted white LEDs.     

A novel Mn4+‐activated red phosphor for use in light emitting diodes,K3SiF7:Mn4+

Phosphors that exhibit a narrow red emission are particularly interesting due to the advantage of providing a more extensive color gamut and better rendering in LED applications such as displays and solid‐state lighting. Although some Eu²⁺‐activated nitridosilicates have been discovered in this regard, K₂SiF₆:Mn⁴⁺ phosphors are the only option in actual LED applications thus far. We discovered a novel phosphor, K₃SiF₇:Mn⁴⁺, with P4/mbm symmetry. The luminescent properties of K₃SiF₇:Mn⁴⁺ are almost identical to those of the K₂SiF₆:Mn⁴⁺ phosphor, but its materials identity is distinct due to a completely different crystallographic structure, which leads to reduced decay time. The fast decay is one of the most serious disadvantages of existing K₂SiF₆:Mn⁴⁺ phosphors. The K₃SiF₇:Mn⁴⁺ phosphor was examined in comparison to the K₂SiF₆:Mn⁴⁺ via density functional theory calculation, Rietveld refinement, X‐ray photoelectron spectroscopy, X‐ray absorption near‐edge structure spectroscopy, and time‐resolved photoluminescence.     

A single‐phase,thermally stable and color-tunable white light emitting Na2Ca1-x-yCexMnyP2O7 phosphors for white light emitting diodes via energy transfer

The solid-state reaction method was used to develop a series of Na₂Ca_1-x-yCe_xMn_yP₂O₇ phosphors in an H₂–N₂ environment. The crystal structure of the pyrophosphate host, valence state of dopants (Ce, Mn), emission behavior of dopants, energy transfer mechanism, and thermal quenching behavior were thoroughly examined. Doping with Ce³⁺ and Mn²⁺ ions enhanced the photoluminescence characteristics of Na₂Ca_1-x-yCe_xMn_yP₂O₇ while having negligible effect on the host's phase purity. Under 365 nm UV light irradiation, the addition of Ce³⁺ ion in the Na₂CaP₂O₇ host revealed an asymmetric band with the typical blue emission around 415 nm and a shoulder around 455 nm. To obtain white light, Mn²⁺ ion was supplementarily substituted to the present system. When the Mn²⁺ ions concentration was elevated in the Na₂CaP₂O₇ host, the emission intensity of 560 nm peak corresponding to Mn²⁺ transition enhanced significantly at the cost of Ce³⁺ emission of 415 nm. The systematic decrease of Ce³⁺ emission intensity and corresponding increase in the Mn²⁺ intensity with the increase in Mn²⁺ concentration indicated the possibility of effective energy transfer from Ce³⁺ to Mn²⁺ ions. The obtained results indicated that energy transfer from the Ce³⁺ to Mn²⁺ ions governed by dipole-quadrupole interaction. Because of the efficient energy transfer, the blue emission from Ce³⁺ and the orange red emission of Mn²⁺ provide white light from a single host along with high value of activation energy and low thermal quenching behaviour make the present phosphors to be suitable for high-power LEDs.     

Zero-thermal-quenching of LiAl5O8: Eu2+, Mn2+ phosphors by energy transfer and defects engineering

The photoluminescence behavior of inorganic phosphors is generally influenced by thermal stability, which determines the luminescence efficiency of the corresponding devices. Here, a series of Eu²⁺, Mn²⁺ co-doped LiAl₅O₈ blue-green-emitting phosphors with thermal robust are successfully fabricated. The concentration-dependent emission spectra and the decay curves of the as-obtained LiAl₅O₈: Eu²⁺, Mn²⁺ samples manifest the occurrence of the energy transfer from Eu²⁺ to Mn²⁺ ions via dipole-dipole interaction, and the corresponding emitted colors are gradually modulated from blue to green under the excitation of 310 nm. Moreover, the zero-thermal-quenching luminescence is observed when the operation temperature is up to 423 K, which is attributed to the energy release from the trapping centers to emitting centers (Eu²⁺ and Mn²⁺) at high temperature. Furthermore, a warm white light-emitting diodes (WLEDs) device with correlated color temperature of 5061 K, a color rendering index of 80.6 and long-term stability is fabricated by combining UV LED chip (λ_ex = 310 nm), as-obtained LiAl₅O₈: Eu²⁺, Mn²⁺ phosphor, commercially available red phosphor and green phosphor. These results prove the potential application of the as-obtained LiAl₅O₈: Eu²⁺, Mn²⁺ phosphor for UV-pumped WLEDs devices.     

Investigation of luminescence properties of Pb2+‐doped Sr2B2O5 phosphor

A near‐UV emitting phosphor, Pb²⁺‐doped Sr₂B₂O₅ was synthesized by the solid‐state reaction method at 900°C for 3 hours in air. The structure of the phosphor was verified by X‐ray diffraction study which shows monoclinic phase. Fourier transform infrared (FTIR) analysis confirmed the formation of Sr₂B₂O₅. The excitation and emission spectra of the synthesized phosphors were investigated at room temperature with photoluminescence spectrophotometer. The emission and excitation bands of Pb²⁺‐doped Sr₂B₂O₅ were observed at 370 and 289 nm, respectively. The dependence of the PL intensities on the Pb²⁺ concentration for the Sr_2?xPb_xB₂O₅ (0.01 ≤ x ≤ 0.03) phosphors was studied and it was observed that the concentration quenching of Pb²⁺ in Sr₂B₂O₅ is 0.025 mol.     

Luminescence Properties and Energy Transfer of Ce3+,Tb3+‐Coactivatedβ‐SiAlON Phosphors

Using the solid‐state reaction method, Ce³⁺,Tb³⁺‐coactivated Si₅AlON₇ (Si_6?zAl_zO_zN_8?z, z = 1) phosphors were successfully synthesized. The obtained phosphors exhibit high absorption and strong excitation bands in the wavelength range of 240–440 nm, matching well with the light emitting‐diode (LED) chip. The ET from Ce³⁺ to Tb³⁺ ions in Si₅AlON₇:Ce³⁺,Tb³⁺ has been studied and demonstrated by the luminescence spectra and decay curves. Moreover, the phosphors show tunable emissions from blue to green by tuning the relative ratio of the Ce³⁺ to Tb³⁺ ions. Thermal quenching properties of Si₅AlON₇:Ce³⁺,Tb³⁺ had also been investigated and the quenching temperature is ~190°C. These results show that Si₅AlON₇:Ce³⁺,Tb³⁺ could be a promising candidate for a single‐phased color‐tunable phosphor applied in UV‐chip pumped LEDs.     

Red-shift and improved afterglow of Sr3Al2-xBxO5Cl2:Eu2+, Dy3+ phosphors via a cation substitution strategy

Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ (x = 0, 0.2, 0.4) long persistent phosphors were prepared via solid-state process. The pristine Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺ phosphor exhibits orange/red broad band emission around 609 nm, which can be attributed to the electric radiation transitions 4f⁶5 d¹→4f⁷ of Eu²⁺. Upon the same excitation, the B³⁺-doped Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphors display red-shift from 609 nm to 625 nm with increasing B³⁺ concentrations. The XRD patterns show that Al³⁺ can be replaced by B³⁺ in the host lattice at the tetrahedral site, which causes lattice contraction and crystal field enhancement, and thereafter achieves the red-shift on the emission spectrum. The XPS investigation provides direct evidence of the dominant 2-valent europium in the phosphor, which can be ascribed for the broad band emission of the prepared phosphors. The afterglow of all phosphors show standard double exponential decay behavior, and the afterglow of Sr₃Al₂O₅Cl₂:Eu²⁺, Dy³⁺is rather weak, while the sample co-doped with B³⁺shows longer and stronger afterglow, as confirmed after the curve simulation. The analysis of thermally stimulated luminescence showed that, when B³⁺ is introduced, a much deeper trap is created, and the density of the electron trap is also significantly increased. As a result, B³⁺ ions caused redshift and enhanced afterglow for the Sr₃Al_2-xB_xO₅Cl₂:Eu²⁺, Dy³⁺ phosphor.     

Novel Broadband Excited and Linear Red‐Emitting Ba2Y(BO3)2Cl: Ce3+, Tb3+, Eu3+ Phosphor: Luminescence and Energy Transfer

A series of Ce³⁺, Tb³⁺, Eu³⁺ tri‐doped Ba₂Y(BO₃)₂Cl red‐emitting phosphor have been synthesized by solid‐state method. The Ce³⁺→Tb³⁺→Eu³⁺ energy‐transfer scheme has been proposed to realize the sensitization of Eu³⁺ ion emission by Ce³⁺ ions. Following this energy‐transfer model, near‐UV convertible Eu³⁺‐activated red phosphors have been obtained in Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ phosphors. Energy transfers from Ce³⁺ to Tb³⁺, and Tb³⁺ to Eu³⁺, as well as corresponding energy‐transfer efficiencies are investigated. The combination of narrow‐line red emission and near‐UV broadband excitation makes Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ as a novel and efficient red phosphor for NUV LED applications.     

Tuning the Color Emission of Sr2P2O7: Tb3+, Eu3+ Phosphors Based on Energy Transfer

A series of color tunable Tb³⁺‐ and Eu³⁺‐activated Sr₂P₂O₇ phosphors were synthesized by a traditional solid‐state reaction method in air atmosphere. The crystal structure, photoluminescence (PL) properties, energy transfer, thermal stability, and luminous efficiency were investigated. A series of characteristic emission of Tb³⁺ and Eu³⁺ were observed in the PL spectra and the variation in the emission intensities of the three emission peaks at around 416 nm (blue), 545 nm (green), and 593 nm (orange‐red) induced the multicolor emission evolution by tuning the Tb³⁺/Eu³⁺ content ratio. The energy‐transfer mechanism from Tb³⁺ to Eu³⁺ ion was determined to be dipole–dipole interaction, and the energy‐transfer efficiency was about 90%. The novel phosphors have excellent thermal stability in the temperature range of 77–473 K and the Commission International De L'Eclairage 1931 chromaticity coordinates of Sr₂P₂O₇: Tb³⁺, Eu³⁺ (λ_ex = 378 nm) move toward the ideal white light coordinates.