A note on the similarity solutions for free convection on a vertical plate

Summary The similarity solutions for free convection on a vertical plate when the (non-dimensional) plate temperature is x and when the (non-dimensional) surface heat flux is –x are considered. Solutions valid for 1 and 1 are obtained. Further, for the first problem it is shown that there is a value ₀, dependent on the Prandtl number, such that solutions of the similarity equations are possible only for >₀, and for the second problem that solutions are possible only for >–1 (for all Prandtl numbers). In both cases the solutions becomes singular as ₀ and as –1, and the natures of these singularities are discussed.     

hp-version finite elements for the space-time domain

A bilinear formulation of elasto-dynamics is offered which includes, as a special case, Hamilton's law of varying action. However, the more general bilinear formulation has several advantages over Hamilton's law. First, it admits a larger class of initial-value and boundary-value problems. Second, in its variational form, it offers physical insight into the so-called trailing terms of Hamilton's law. Third, numerical applications (i.e., finite elements in time) can be proven to be convergent under correct application of the bilinear formulation, whereas they can be demonstrated to diverge for specific problems under Hamilton's law. Fourth, the bilinear formulation offers automatic convergence of the natural velocity end conditions; while these must be constrained in present applications of Hamilton's law. Fifth, the bilinear formulation can be implemented in terms of a Larange multiplier that gives an order of magnitude improvement in the convergence of velocity. This implies that, in this form, the method is a hybrid finite-element approach.List of symbols b arbitrary constant - A _i, A _i vector of integrals, i = 0, j - A() linear operator on - () Hamilton's form of A - B (u, ) bilinear operator u, - B (u, ) Hamilton's form of B - B _i,j , B _ij , B _ij matrix of integrals - C constant, N/m - c number of floating-point operations per coef. evaluation - f, f(x) force per unit length, N/m - F, F ₀, F _L forces, N - J number of functions in series for û - k spring rate per unit length, N/m² - K spring rate, N/m - K _max maximum value of K - L _a Lagrangian, non-dimensional - L length of beam, m - m mass per unit length, kg/m - M mass, kg - M _max maximum value of M - n number of functions in series for - N number of elements in domain - p momentum density, kg/sec - P, P ₀, P _T momentum, kg-m/sec - q _i generalized coordinates - r _j coefficients of _j - t time, sec - t ₀, t ₁ limits of action integral, Hamilton's law - T end of time period, sec - u solution for displacement, m - û approximation to u, m - u ₀ initial value for u, m - test function, m - limited class of , m - x spatial coordinate, m - flapping angle, rad - Lock number - time increment, sec - Lagrange multiplier - longitudinal stiffness EA, N (Eqs. 1–18) - advance ratio of rotor (Eqs. 33–34 and figures) - _i , _r polynomial functions - non-dimensional time, azimuth angle - () variation of ( ) - W virtual work - ( ) d ( )/dx - ( .) d ( )/dt - (*) d/d - [ ] matrix - { } column vector - row vector     

Investigation of the excitonic insulator phase in bismuth-antimony alloys

Pressure-induced metal-semiconductor transitions in bismuth-antimony alloys in a strong magnetic field (up to 70 kOe) at helium temperatures have been investigated. It is found that for values of the overlap-gap |G|1 meV the alloy forms an excitonic insulator (EI) in magnetic fields above a certain threshold (30–40 kOe). It is inferred that the EI energy gap increases with the magnetic field. The maximum gap observed in fields of 70 kOe turns out to be ₀₀7.5 K. An analysis of the results shows that transitions to the EI phase are observed from both the semimetal and the semiconducting states. The critical transition temperatureT _c is related to the EI gap by the expressionT _c0.7. Arguments are advanced in support of the fact that the formation of the EI phase involves the pairing of electrons at theL point with holes at theT point.     

Theory of periodically driven,current-carrying,superconducting filaments. I. Spatially homogeneous states

Starting from the nonequilibrium theory of dirty superconductors in the Ginzburg-Landau regime, spatially homogeneous states with an applied currentI=I ₀+I ₁ cos (t) are considered. Expressions for the linear response (I₁ small) valid up to high frequencies (k _BT_c) are derived and evaluated analytically for the experimentally important case of smallI ₀ and ₀(T). Then the nonlinear response is treated for frequencies with _E1. Interesting new behavior is found for frequencies ₀ 1, where ₀ is essentially the GL relaxation time.     

Normal-State Gap, Supercarrier Mass Anisotropy and Isotope Effects in La2?xSrxCuO4

Magnetization measurements have been performed on the oxygen-isotopeexchanged samples (¹⁶O and ¹⁸O) of the one-layer cuprate superconductorsLa_2–x Sr _x CuO₄ (0.06x0.20). We find that there is an oxygen-isotopeeffect on the effective supercarrier mass m**, which is huge for x=0.06,and reduced to a smaller value for x=0.15. We also find that there coexistsmall (bi)polarons and free carriers for x0.09, but only small (bi)polaronsare present for x0.09. The normal-state gap is related to the bipolaronbinding energy which is inversely proportional to x for 0.05x0.15. Theobserved isotope effects, supercarrier mass anisotropy, normal-state gap,and mid-infrared spectra for x0.09 can be quantitatively explained by the small(bi)polaron theory of superconductivity proposed by Alexandrov, Kabanov, andMott (AKM).     

Microstructure and mechanical properties of rapidly quenched L20 and L20+L12 alloys in Ni-Al-Fe and Ni-Al-Co systems

Ductile L2₀-type wires and+L1₂-type duplex wires with high strengths and large elongation in the Ni-Al-Fe and Ni-Al-Co ternary systems have been manufactured directly from the liquid state by an in-rotating-water spinning method. The wire diameter was in the range 80 to 180m and the average grain size was 2 to 4m for the wires and 0.2 to 1.0m for the+ wires. _y, _f and _p of the wires were found to be about 360 to 760 MPa, 560 to 960 MPa, and 0.2 to 5.5%, respectively, for the Ni-Al-Fe system, those of the+ wires were about 395 to 660 MPa, 670 to 1285 MPa, and 3.5 to 17%, respectively, for the Ni-Al-Fe system, and about 260 to 365 MPa, 600 to 870 MPa, and 4.0 to 7.0%, respectively, for the Ni-Al-Co system. Cold-drawing caused a significant increase in _y and _f and the values attained were about 1850 and 2500 MPa, respectively, for Ni-20Al-30Fe and Ni-25Al-30Co wires drawn to about 90% reduction in area. The high strengths, large elongation and good cold-workability of the melt-quenched and+ compound wires have been inferred to be due to the structural change into a low-degree ordered state containing a high density of phase boundaries, suppression of grain-boundary segregation and refinement of grain size.     

Investigations of the copper isotope effect in oxygen-deficient YBa2Cu3O7−δ

We present data on the copper isotope effect (⁶³Cu-⁶⁵Cu), C_u =-nT_c/nm_Cu, for two isotopic pairs of oxygen-deficient YBa₂Cu₃O_7–, where varies between 0.06 and 0.52. _Cu is below 0.01 at =0.06 (fully oxygenated), it takes values between –0.14 and –0.34 in the 60 K plateau. Larger negative values of _Cu are observed away from the plateau. The dependence of _Cu is similar to that of the pressure effect dnT_c/dP.     

Coefficients of mass transfer between a fluidized bed and the surface of a capillary-porous body

Results are presented from a theoretical determination of coefficients of mass transfer between a fluidized bed of porous particles and a capillary-porous body.Notation a particle radius - F area of contact of particles with the surface of the body - f percentage of area of surface of product in contact with the bubble phase - g acceleration due to gravity - i flow of liquid mass from a unit area of the surface - N number of fluidizations - n number of particles coming into contact with a surface of unit area per unit of time - p_p, p_b capillary potentials of particles and product - R₂, R₁ radii of narrow and broad pores inside the product - r radius of capillaries in the particles - S area of the surface being treated - T temperature of the bed - t time of treatment - u percentage content of liquid in the specimen - V volume of the product being treated - v mean square component of the fluctuation velocity of the particles in the direction normal to the surface - , * standard and corrected mass-transfer coefficients determined from (5) and (9) - _b, _b, _p porosities of product determined for all and for only the small pores and the porosity of the material of the particles - _d, _m porosity of the dense phase and the porosity of the bed in the state of minimum fluidization - _b, _p angles of wetting of the materials of the product and particles, respectively, by the liquid binder - , viscosity and density of the liquid - ₀ density of the dry product - surface tension coefficient of the liquid - characteristic time of contact of particles with the surface - Re_m Reynolds number corresponding to particle radius and minimum-bed-fluidization velocity [6] Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 40, No. 3, pp. 460–465, March, 1981.     

Underpinning of a simple blunt flaw fracture initiation relation

With the cohesive process zone representation of the micro-mechanistic processes that are associated with fracture as a basis, the author is involved in a wide-ranging research programme, the objective being to extend the fracture mechanics methodology for sharp cracks to blunt flaws, so as to take credit for the blunt flaw geometry. In earlier work, a Mode I fracture initiation relation has been derived, subject to the restriction that the process zone size s is small compared with the flaw depth (length) and any characteristic dimension other than the flaw root radius . The relation gives the critical elastic flaw-tip peak stress _pcr, and has been derived using a two-extremes procedure, whereby the separate, and indeed exact, solutions for small and large s/ values are blended together to give an all-embracing relation that is valid for all s/ values. _pcr is expressed in terms of the process zone material parameters and geometrical parameters but, for a wide range of flaw geometry parameters, _pcr essentially depends on only one geometrical parameter . This paper provides underpinning for the general thrust of the two-extremes procedure by appealing to exact results for the complete spectrum of s/ values from analyses of appropriate Mode III models. Results obtained by applying the two-extremes procedure are shown to be in very good agreement with the exact results.     

Thermal Conductivity of the Four-Leg Spin-Ladder System La2Cu2O5 Single Crystal

We have investigated the magnetic susceptibility, , and the thermal conductivity, , in magnetic fields for the four-leg spin-ladder system La₂Cu₂O₅ single crystal. The in a magnetic field parallel to the ladder exhibits a kink at 130 K in correspondence to the magnetic ordering. The along the ladder exhibits a peak at 25 K and a shoulder at 14 K, which are probably related to the thermal conductivity due to magnons, _magnon, and that due to phonons, _phonon, respectively. The perpendicular to the ladder, on the other hand, exhibits only one broad peak related to _phonon. The observed large anisotropy of has been explained based upon the anisotropy of _magnon.     

Geometrical factors for parts of an infinite cylindrical surface

A method is described for calculating geometrical factors, allowing for attenuation of radiation by the medium, and computing radiative heat transfer between coaxial strips forming part of a cylinder.Notation mean generalized geometrical factor - local generalized geometrical factor for a closed infinite cylindrical surface - F surface area - l length of ray between elements dF_m - D and H diameter and length of cylinder - k ray attenuation coefficient - equivalent solid angle [1] determined from the condition _mm=1 at =0 for a closed surface - f () indicatrix of the specific radiation intensity (a quantity analogous to the specific luminous intensity [1]) - angle between the normal to an element of surface and the ray linking the surface elements - and angles in a section of the surface - angle between the radius and the chord subtending the projections of dF_mon the section - angle between the radius and the chord subtending the projection of element dF_mon the section and the edge of the surface - acute angle between rayl and the generator of the cylinder - ₀ half subtended angle for the arc of a section of the surface - S₂ and M generalized local geometrical factors in the notation of [2] (s₂ and is shown in Table 2 - M local factor for an infinite cylinder with a semicircular cross section for a point in the middle of the plane part of the surface; a table of values of M is given in [2]) - n number of strips     

Elastodynamic parameters for dynamic interface fracture mechanics

Summary Dynamic extension of cracks running along curvilinear interfaces of brittle bimaterials subjected to mechanical crack surface loads and superimposed thermal strains acting along the ligament is considered. This paper especially addresses the provision and discussion of elastodynamic interface parameters in order to assess quantitatively the bimaterial fracture in view of the governing physical features: applied mechanical and thermal strain loading, existence of an interface, crack-tip velocity and curvature of the interface contour. By utilizing the linear theory of thermoelasticity and adopting Stroh's method of generalized complex potentials, from the corresponding boundary and continuity conditions vectorial Hilbert problems are derived. It is shown that the parameters of the eigenvalues and of the eigenvectors of the Hilbert problems can be interpreted as elastodynamic interface mechanics parameters reading (,v _p, _Hf , _Hf ). Generalized Dundurs parameters of dynamics (, ) and consequently an associated generalized Dundurs diagram of dynamics are proposed. While the aforementioned elastodynamic interface parameters (, ,v _p, _Hf , _Hf ) do not assume the interface to be damaged, interfaces with running interface cracks generally cause two additional interface parameters, denoted as bimaterial constants (, _Hf ), where the latter is specific to the curvature of the interface in conjunction with the velocity of the interface crack. However, the bimaterial constants (, _Hf ) can be traced back to interface parameters for an uncracked bimaterial, namely to (, _Hf ).     

YBCO Bicrystal Junctions on Sapphire: d-Wave Impact and Possible Applications

The current transport and Josephson effect have been investigated in YBCO junctions, fabricated on the sapphire bicrystal substrates. The YBCO film with thickness t150 nm was deposited by dc sputtering on the epitaxial CeO ₂ buffer layer made by rf magnetron sputtering. The junctions were characterized at dc and at mm waves. 5 m wide junctions have moderately high normal state resistance R _N = 5÷30 with critical currents I _c =50÷200 A which give I _c R _N product of order of 0.5÷2 mV. The tolerance of characteristic interface resistance (R _N S) was around 30% for the junctions on a chip. Experimental data, discussed in terms of d-wave symmetry, demonstrate possibility of design of small scale integrated Josephson microwave circuits.     

Fatigue crack growth behaviour of tungsten carbide-cobalt hardmetals

Fatigue crack propagation studies have been carried out on a range of WC-Co hardmetals of varying cobalt content and grain size using a constant-stress intensity factor double torsion test specimen geometry. Results have confirmed the marked influence of mean stress (throughK _max), which is interpreted in terms of static modes of fracture occurring in conjunction with a true fatigue process, the existence of which can be rationalized through the absence of any frequency effect. Dramatic increases in fatigue crack growth rate are found asK _max approaches that value of stress intensity factor ( 0.9K_IC) for which static crack growth under monotonic load (or static fatigue) occurs in these materials. Lower crack growth rates, however, produce fractographic features indistinguishable from those resulting from fast fracture. These observations, and the important effect of increasing mean free path of the cobalt binder in reducing fatigue crack growth rate, can reasonably be explained through a consideration of the mechanism of fatigue crack advance through ligament rupture of the cobalt binder at the tip of a propagating crack.     

Dielectric properties of chemically vapour-deposited Si3N4

The dielectric properties of chemically vapour-deposited (CVD) amorphous and crystalline Si₃N₄ were measured in the temperature range from room temperature to 800° C. The a.c. conductivity ( _a.c.) of the amorphous CVD-Si₃N₄ was found to be less than that of the crystalline CVD-Si₃N₄ below 500° C, but became greater than that of the crystalline CVD-Si₃N₄ over 500° C due to the contribution of d.c. conductivity ( _d.c.). The measured loss factor () and dielectric constant () of the amorphous CVD-Si₃N₄ are smaller than those of the crystalline CVD-Si₃N₄ in all of the temperature and frequency ranges examined. The relationships of ^n-1, (- ) ^n-1 and/(- ) = cot (n/2) (were observed for the amorphous and crystalline specimens, where is angular frequency andn is a constant. The values ofn of amorphous and crystalline CVD-Si₃N₄ were 0.8 to 0.9 and 0.6 to 0.8, respectively. These results may indicate that the a.c. conduction observed for both of the above specimens is caused by hopping carriers. The values of loss tangent (tan) increased with increasing temperature. The relationship of log (tan) T was observed. The value of tan for the amorphous CVD-Si₃N₄ was smaller than that of the crystalline CVD-Si₃N₄.     

Heat transfer in plane film formation

A mathematical model is obtained for the process of cooling with formation of a planar film. The solution obtained is verified experimentally.Notation mean axial velocity gradient - v_x current axial velocity - v_o initial polymer velocity - v₁ sampling velocity - K draw ratio - deformation rate tensor - x, y, z spatial coordinates - X, Y dimensionless coordinates - L() differential operator - T temperature - T_o initial temperature - T_c temperature of surrounding medium - dimensionless temperature - dimensionless temperature averaged over film thickness - thermal-diffusivity coefficient - 2_o initial film thickness - thermal conductivity - heat-transfer coefficient - f(X) distance function - Bi Biot criterion, Bi_o, Biot criterion calculated for initial film thickness - Gz* modified Graetz criterion - V dimensionless velocity - ₁, ₂, ₃ heat-transfer coefficients produced by radiation, free convection, and forced convection - v_c, _c mean velocity and film half-thickness in formation zone - T₁ calculated temperature value - T₂ experimental temperature value - l formation zone length Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 854–858, November, 1979.     

Dielectric Properties in Ternary Mixtures of Ethane-1,2-diol + 1,2-Dimethoxyethane + Water

The static dielectric constant () of ethane-1,2-diol+1,2-dimethoxyethane + water ternary mixtures was measured as a function of temperature (263.15 T (K) 353.15) and composition, over the complete mole fraction range 0 x ₁, x ₂, x ₃ 1. The experimental values were analyzed by empirical relationships that accounted for the dependence  = (T) and Y  = Y(x _i). A comparison between calculated and experimental data shows that these fitting relationships can be reliably used to predict values, along with other related properties, in areas of experimental data gaps. Starting from the experimental measurements, some derived quantities such as molar orientational polarization (P), dipolar interaction free energy ( F ) and the relevant thermodynamic excess mixing properties (F ^E, F^E _,i), were obtained. The values of the excess quantities are indicative of the presence of specific interactions between different components in the mixtures. A discussion of data in terms of the Kirkwood theory also provides information on the short-range intermolecular interactions, suggesting the formation of stable two-:component adducts rather than of more complex moieties involving all three molecular species.     

Absorption Spectrum of ZnO Precipitates in ZnSe

The absorption spectrum of ZnO precipitates in ZnSe saturated with oxygen is studied in the spectral range 500–2000 cm^–1 and is shown to correlate with the transmission spectrum of single-crystal ZnO. Saturation of ZnSe with oxygen in the course of growth leads to ZnO precipitation during cooling. The precipitates give rise to narrow absorption bands in the range 5.8–7.1 m, which correlate with the components of the multiphonon absorption spectrum of ZnO, formed by combinations of LO and TO phonons. The 2LO mode defines the long-wavelength transmission edge of ZnO. In addition, the spectrum shows strong absorptions due to the LO + TO(10.2 m) and 2TO (11.3 and 12.7 m) modes. The possible role of SeO₂ is discussed. It is suggested that ZnO with a high carrier concentration may act as a gray filter in the spectral range 2–9 m.     

Transport results from untwinned YBCO: Washboard frequency of the vortex lattice,and the quasiparticle mean free path

The washboard frequency of the moving vortex lattice in untwinned YBa₂ Cu₃ O_6.93 may be observed through mode-locking to an externally applied ac current of frequency _ext. The interference between and _ext results in jumps in the dc current-voltage characteristics when and _ext are harmonically related¹. The interference effect disappears in the vortex liquid state. The Hall conductivity _xy below T_c in YBCO contains contributions² from a positive quasiparticle (qp) term (H) and a negative vortex term (1/H). The qp term is surprisingly large well below T_c and implies a large gap anisotropy and a long qp mean free path (mfp). The thermal Hall effect³ _xy is closely related to the qp _xy; _xy is produced by asymmetric scattering of qp by pinned vortices. The qp mfp at H = 0, extracted from _xy and extended to low T by _xy, increases remarkably from 90 Å at T_c to more than 0.5m at 22 K.     

Singular Band Behavior of the Extended Emery Model for the Superconducting Cuprates

Mean field slave-boson approximation is performed on the extended Emery model for the CuO₂ conducting plane. The model is parameterized by Cu–O charge transfer energy _pd , copper–oxygen overlap t ₀, oxygen–oxygen overlap t', and Coulomb interaction U on the copper site taken as infinite. Special emphasis is placed on the role of t in the renormalization trends of the effective band parameters _pf and t, replacing _pd and t ₀, at small doping . It is shown that small, negative t expands the range of stability of the metallic phase, changing, in the second order of the perturbation theory, the nature of the metal–insulator transition point. In the nonperturbative limit, t modifies strongly the renormalization of _pf , making it saturate at the value of 4t. Finite doping suppresses the insulating state approximately symmetrically with respect to its sign. The regime _pf 4t fits very well the ARPES spectra of Y123, Bi2212, and LSCO and also explans, in the latter case, the evolution of the FS with doping accompanied by the spectral weight-transfer from the oxygen to the resonant band.