Radiation pattern synthesis for circular aperture horn antennas

A set of radiation pattern functions, suitable for synthesis of radiation patterns from circular aperture horn antennas, is obtained by assuming an aperture distribution consisting of the fields of cylindrical waveguide modes. A technique is presented for using a linear combination of the radiation pattern functions to approximate a desired radiation pattern. Linear combinations of the radiation pattern functions resulting in maximum secondary gain, when used to illuminate a paraboloidal antenna, are obtained empirically. Using spherical wave theory, maximum performance theoretically obtainable from an antenna is derived as a function of the aperture size of the feed system; the feed efficiency resulting from these theoretical limits on performance is compared to the feed efficiency of patterns obtainable from circular aperture horn antennas, and to experimental results of attempts to realize optimum circular aperture horn patterns.     

The Millimeter Wave Radiation of a Traveling Wave Sinusoidal Wire Antenna

In this paper, investigation of radiation properties of the traveling-wave sinusoidal wire antennas is extended to the millimeter-wave frequencies (Ka-band) for the antennas whose geometrical dimensions vary in a wide range. Far-field patterns and S-parameters of composed three antenna sets were measured. A mathematical model was constructed for the structure and a MATLAB code based on this theoretical approach was written to calculate patterns, phase and attenuation constants of all investigated antennas. Frequency characteristics and the relation of antenna dimensions with wave parameters were investigated. Measured and calculated patterns were also compared with the constructed far-field patterns obtained by MoM (method of moments) and the MoM current distributions were used to explain the loss mechanisms of antennas. A directive, undistorted and smooth radiation can be achieved only choosing small undulated antennas whose peak-to-peak amplitude to period ratio κ is smaller than 0.4 (κ?<?0.4). It is shown that wavelength of broadside radiation is not equal to antenna period for all antennas, except for very small undulated antennas (κ?<?0.2). This antenna type can be used as a frequency-scan antenna for millimeter wave radars.     

Multifunctional reconfigurable MEMS integrated antennas for adaptive MIMO systems

Multi-input multi-output systems with associated technologies such as smart antennas and adaptive coding and modulation techniques enhance channel capacity, diversity, and robustness of wireless communications as has been proven by many recent research results both in theory and experiments. This article focuses on the antenna aspect of MIMO systems. In particular, we emphasize the important role of the reconfigurable antenna and its links with space-time coding techniques that can be employed for further exploitation of the theoretical performance of MIMO wireless systems. The advantages of the reconfigurable antenna compared to the traditional smart antenna are discussed. Establishment of reconfigurable antennas requires novel radio frequency microelectromechanical systems technology, which has recently been developed in the authors' group. We briefly introduce this technology with emphasis on its distinct advantages over existing silicon-based MEMS technologies for reconfigurable antennas. A reconfigurable antenna design that can change its operating frequency and radiation/polarization characteristics is described. Finally, we present the experimental and theoretical results from impedance and radiation performance characterization for different antenna configurations.     

大型陆基雷达监测系统性能的实验研究

对于监测系统的性能评价,最为直观的方法就是比较校准前后的远场方向图。对于陆基大型有源相控阵雷达,其方向图需要通过飞机或飞艇等工具在空中飞行测量,不仅设备量大,操作复杂,而且成本昂贵,而对监测系统性能的研究,没有必要测量阵面的完整方向图。文中提出了一个简单易行的方法,即在阵列中连续选取其中少数单元组成一个小阵列,其远场距离要比整个雷达阵列的远场距离小多,通过改装移动测试车辆,在地面远场处对小阵列的方向图进行测量、比较,就可以验证监测系统的效果。实验结果表明,小阵列校准后方向图与理论值符合,性能指标要明显优于校准前方向图,说明该监测系统可靠可行,可以应用到其他雷达的监测中。     

Short medium frequency AM antennas

Short antennas have again attracted broadcaster attention. These kinds of antennas have been used since the 1920s. At that time it was the logical antenna as a new application of this service after more than twenty years of telegraphic transmissions. Telegraphic transmissions were the most important radio communication service at that time, and because of the long range needed the lowest frequencies as possible were employed. For this reason very short antennas were used even if their size was enormous. Top loaded monopoles were very popular and this technique was employed for broadcast use before the vertical transmitting mast exhaustive study was carried on in the thirties. Nowadays a short antenna would be useful for low power applications and specially to be mounted on building tops. Of course this kind of antennas is not intended to replace the optimum monopoles or vertical dipole where maximum efficiency, maximum gain and antifading properties were achieved after exhaustive studies and after long experience theoretically and practically achieved. CFAs, short monopoles, short dipoles and short folded monopoles have been analyzed from the theoretical and practical point of view in order to choose the simplest and most efficient. model to fulfill downtown stringent requirements     

Correlation and capacity of MIMO systems and mutual coupling, radiation efficiency, and diversity gain of their antennas: simulations and measurements in a reverberation chamber

MIMO systems are characterized by their maximum available capacity, which is reduced if there is correlation between the signals on different channels. The correlation is primarily caused by mutual coupling between the elements of the antenna arrays on both the receiving and transmitting sides. Similarly, diversity antennas can be characterized by a diversity gain that also is affected by mutual coupling between the antennas. We explain how such MIMO and diversity antennas with mutual coupling can be analyzed by classical embedded element patterns that can be computed by standard computer codes. In the MIMO example under investigation, the mutual coupling reduces both correlation, which increases the capacity, and radiation efficiency, which decreases it, and the combined effect is a net capacity reduction. We also explain how the radiation efficiency, diversity gain, correlation, and channel capacity can be measured in a reverberation chamber. The measurements show good agreement with simulations.     

Imperfect sector antenna diversity in slotted ALOHA mobile network

In a wireless network with path loss and fading channels, receiver capture is known to substantially enhance the performance of the slotted ALOHA random access protocol. The efficiency of narrowband slotted ALOHA radio networks can be enhanced further by using sector antennas, each receiving signals from a particular segment of the network area. This paper investigates the effect of realistic, i.e., partially overlapping antenna patterns and the resulting correlation of received power levels at different receiver branches. A method is derived for computing the joint throughput from two base station receivers with overlapping antennas patterns. The a posteriori information provided by the event of one message capturing one antenna is used to find conditional probabilities of capturing the other antennas as well. The paper shows that any overlap in the antenna patterns decreases the throughput, but transmissions from the overlapping area may face a larger probability of capture than signals from directions in which one antenna has maximum gain     

A radio access system with distributed antennas

This paper analyzes a radio access system that has multiple antennas spatially distributed throughout each cell, instead of a single antenna at each cell. The same signal is simulcast by each antenna in the cell. The signals at a given cell could be multiplexed and modulated for radio transmission at a single node, then transmitted on a coaxial cable distribution system to and from the distributed antennas in a cell. Frequency translation and radio frequency (RF) amplification may need to be performed at each antenna, except for indoor applications with short coaxial cables. This paper presents calculations of signal-to-interference ratios (SIR) and handoff performance for cells with distributed antennas. It is shown that the use of distributed antennas can substantially increase the SIR above a system with a single antenna per cell, and this increase is quantified. It is also shown that increasing the number of antennas results in better overall handoff performance, with a lower number of handoffs and higher received signal power. Minimizing the number of handoffs will reduce the impact of wireless services on network elements     

ESPAR array design for the UHF RFID wireless sensor communication system

In this paper, in order to improve the received signal strength (RSS) and signal quality, three arrays of electronically steerable parasitic array radiator (ESPAR) antennas are suggested for the ultra-high frequency (UHF) radio frequency identification (RFID) communication and sensing system applications. Instead of the single antenna, the array antennas have recently been widely used in many communication systems because of their peak gains, better radiation patterns, and higher radiation efficiency. Also, there are some important issues to use the antenna array like high data rates in wireless communication systems and to better understand the many targets or sensors. In this article, a wireless sensor network (WSN) is being investigated to overcome multipath fading and interference by antenna nulling technology that can be achieved through beam control ESPAR array antennas. The proposed ESPAR array antennas exhibit higher gains like 9.63, 10.2, and 12 dBi and proper radiation patterns from one array to another. Moreover, we investigate the mutual coupling effect on the performance of array antennas with different spacing (0.5λ, 0.75λ, λ) and configurations. It is found that the worst mutual coupling reduced by −28 to −34 dB for 2 × 2 array, −3 to −43 dB for 2 × 3 array, and finally −42 dB to −51 dB due to the antenna spacing from 0.5λ to λ. Thus, these suggested antennas could effectively be applied in the WSN communication systems, internet of things (IoT) networks, and massive wireless and backscatter communication systems.     

High-efficiency microwave reflector antennas—A review

The paper provides a review of current research on microwave reflector antennas with particular regard to those antennas which produce pencil-beam radiation patterns. After a preliminary examination of microwave antennas of different types attention is focused on circularly symmetric antennas with axially symmetric feed systems. This class of antenna accounts for the largest number of applications which include microwave point-to-point communication, satellite communication, and radio astronomy. The choice of optimum feed is considered in more detail and it is demonstrated that metallic feeds with corrugated walls represent the best choice in most cases. Brief reference is also made to dielectric cone feeds which may find a place in future systems. The design of dual-reflector systems is considered in depth and different computer optimisation techniques are reviewed. These include the latest methods of diffraction optimization in which more than one of the antenna specifications is involved. An example is given where efficiency and VSWR are simultaneously optimized.     

基于接地天线的超低频信号全向辐射方法

为了解决超低频无线电信号辐射效率极低的难题,采用接地天线辐射超低频信号。由于接地天线辐射具有方向特性,使用一副接地天线对在不同海域里的水下机动平台进行水下通信时,通信可靠性不能得到保证。因此,提出了接地天线全向辐射超低频信号的方法。该方法首先构建两副相互垂直的接地天线以组成天线阵,然后通过精确地控制组成天线阵的两副接地天线输入电流的相位差,使天线阵在水平各方向上辐射的合成电场均匀一致,从而实现了超低频信号全向辐射。该方法能显著提高超低频通信的可靠性,最适合超低频对水下通信和对水下机动平台通信。在目前众多的超低频发射天线设计方案中,采用该方法构建的天线阵尺寸最小,效率最高,且简单、易于实现全向辐射,这对于推广超低频无线电信号在其他领域的应用是具有重要意义。．     

Efficiency measurement of UWB antennas using time reversal in reverberation chambers

Using the reverberation chamber to obtain antenna radiation efficiency is considered. The reverberation chamber, which has for many years been used for electromagnetic compatibility measurements, can also be used with great advantage for antenna measurements since it simulates effectively a uniform multipath propagation environment. How a reverberation chamber can be used to measure the ultra-wideband (UWB) antenna efficiency in a very short time is described. The procedure based on time domain is described and some experimental results are given and compared to measurements obtained by the Wheeler cap method extended by Schantz to UWB antennas.     

The near field of dipole antennas, part I: Theory

The theoretical and experimental evaluation of the electromagnetic fields in the immediate vicinity of resonant dipole antennas is presented. This type of antenna is widely used with portable and mobile radio transmitters. The work presented herein has been motivated by the concern that future Radio Frequency Protection Guides with respect to human exposure to nonionizing electromagnetic radiation might be expressed strictly in terms of the intensity squared of the electric or magnetic fields. It is shown in the results that it is possible to detect relatively high intensity electromagnetic (EM) fields in close proximity to resonant dipoles even for very low levels of radiated power (1 mW and less). The paper is divided into a theoretical section and an experimental section because its goals are twofold. First, the formulas for the correct evaluation of the EM fields in the close proximity to dipole antennas are established. Second, it is shown that such EM fields, which can be theoretically predicted and experimentally verified with satisfactory accuracy, are indeed strong enough to violate proposed Radio Frequency Protection Guides even for very low levels of radiated power. Thus portable radios are rendered virtually useless, although the same guides permit exposures to much higher levels of power in the far field. Part I of the paper is essentially theoretical and expresses the fields near dipole antennas in terms of cylindrical waves, which lend themselves to closed form integration. The asymptotic expressions of some components of the field are particularly simple for close distances (in terms of wavelength) from the antenna. The correctness of the solution is checked by evaluating how closely boundary conditions are satisfied. Results have shown that previously used formulas for evaluating field intensity very near dipole antennas can give incorrect values.     

Binomial array as a multistate phase diversity antenna

If two in-phase plane waves arrive at an antenna from different directions, the resulting signal is not necessarily the coherent sum of the two incoming signals. This is due to the fact that the antenna radiation pattern is actually a complex quantity containing amplitude and phase properties. Thus, it can be stated that antenna phase characteristics may vary as a function of direction. In free space, the antenna phase pattern does not have any role in radio communications in contrast to mobile communications in an urban microcell where the radio channel is very complicated due to multipath propagation. Array antennas offer possibilities to control its phase properties in transmission and reception, which offer a simple technique to improve the combination of received multipath signal components. Binomial arrays are one possibility to implement similar directive beams which, however, have different phase patterns compared to each other. A set of these beams could be used in a discretely optimizing receiver system much in the same way as other diversity techniques are used. A four-element array and results from a microcell radio channel environment simulation are presented as a demonstration of this technique     

Radiation Pattern of Wearable Antennas: A Statistical Analysis of the Influence of the Human Body

This paper explores a statistical approach for modelling antennas?? behaviour in the vicinity of the human body. The statistics of radiation patterns, i.e., average and standard deviation, have been calculated for Uniform and Rayleigh distance Distributions of the antenna to the body. The coupling between the body and the antenna, and the reduction of antenna efficiency, lead to a distortion of the radiation pattern, which depends on the distance as well as on the location on the body. A patch antenna operating at 2.45?GHz, on the head, chest, arm, and leg was simulated in computer simulation technology (CST), using a voxel model. Results show that the relative change of the average radiation pattern for an antenna located on the chest can reach 24?%. The study was complemented with measurements, showing that, in the area of interest for on-body communications, an average difference between CST and measurements of 0.9?dB is found which can be considered very good.     

射电频谱日像仪2m天线设计

提出了一种2¹5 GHz的超宽频带2 m极轴天线,该天线应用在射电日像仪CSRH-II期工程中,由60面天线组成天线阵列,用于太阳射电的频谱观测。简述了2 m天线的技术参数,介绍了天线系统的工作原理,详细描述了极轴天线座架、宽带馈源、反射面等主要组成部分的主要技术特点及设计方法,给出了天线方向图和天线效率等测试结果,测试结果表明天线性能优良,达到了设计的技术指标要求。     

Characteristics of body-mounted antennas for personal radio sets

The development of a multiturn loop antenna for a police officer's personal radio set is described. The antenna is small, low profile, lightweight, with dimensions of2.7 times 2.7 times 0.7in high (1.06 times 1.06 times 0.28cm), and is tunable over the 150- to 170-MHz band. VSWR and radiation patterns are presented with the antenna mounted on a man's shoulder. The shoulder-mounted antenna characteristics are described with conditions where the man is in standing, stooping, and prone positions, with various head and arm movements, and with light and heavy clothing. Radiation patterns are referenced to a 6-in helical whip commonly used by police officers. Radiation patterns also indicate body absorption loss for loop and whip antennas mounted at waist level as compared with shoulder levels. The instantaneous bandwidth is 1.4 MHz for a VSWRleq 3:1. A dual-frequency model for use in a two-frequency push-to-talk mode, is also shown to be practical.     

On-glass automotive diversity antenna and LNA design for S-band satellite digital radio

Selection combining diversity system with antennas mounted on windshield and backlite of a vehicle is proposed for satellite digital audio radio applications. Standalone exterior mount antennas on metallic vehicles perform well for satellite digital audio radio applications, but for composite body vehicles or interior mount antennas, antenna performance becomes a real issue. Proposed on-glass two-antenna diversity is one solution for such applications. The antenna correlation is calculated using the S-parameters of the antennas and found to be very low due to many wavelengths separation between the antennas. Design of low noise amplifier, which has sub 1 dB noise figure and good P1dB due to strong cellular signals, is also detailed. A diversity receiver is described and ride tests are performed to assess the performance of the diversity system in real-time, under weak satellite signal environment which is regarded as the most challenging reception condition.     

Vertical radiation patterns of mobile antenna in UHF band

Theoretical and experimental studies are made on radiation patterns of mobile antennas within the frequency range from 300 to 900 MHz. In order to calculate vertical plane patterns of quarter wavelength monopole and a half-wavelength dipole located on an automobile's roof, a theoretical model of an automobile body is developed, in conjunction with the geometrical theory of diffraction (GTD). The theoretical model consists of three-perfectly conducting plates. It is ascertained from a comparison between calculated and measured results for the feed point impedance and the radiation pattern that the effect of the body and the earth can be well examined with the theoretical model. The results of pattern calculation for the above two antennas show that the radiation patterns depend largely on the configuration of the automobile body and the earth condition. The technique described in this paper can be used as a design tool to estimate radiation performance of mobile antennas.     

Focused aperture microwave antennas operating in the near field zone

Focusing a microwave antenna is often convenient in order to produce a Fraunhofer-type pattern at short distance from the aperture. The characteristics of the radiation patterns produced by some specimens were experimentally tested and compared with theoretical predictions. Basic criteria are given to design focused antennas, once their radiation pattern characteristics are specified.