Dynamic Current-Matching Charge Pump and Gated-Offset Linearization Technique for Delta-Sigma Fractional- $N$ PLLs

This paper proposes a novel charge pump (CP) circuit and a gated-offset linearization technique to improve the performance of a delta-sigma $(Delta Sigma)$ fractional-$N$ PLL. The proposed CP circuit achieves good up/down current matching, while the proposed linearization method enables the PFD/CP system to operate at an improved linear region. The proposed techniques are demonstrated in the design of a 2.4-GHz $Delta Sigma$ fractional-$N$ PLL. The experimental results show these techniques considerably improve the in-band phase noise and fractional spurs. In addition, the proposed gated-offset CP topology further lowers the reference spurs by more than 8 dB over the conventional fixed-offset approach. This chip is implemented in the TSMC 0.18- $mu$m CMOS process. The fully-integrated $Delta Sigma$ fractional-$N$ PLL dissipates 22 mW from a 1.8-V supply voltage.      

A Hybrid Spur Compensation Technique for Finite-Modulo Fractional-N Phase-Locked Loops

A finite-modulo fractional-$N$ PLL utilizing a low-bit high-order $DeltaSigma$ modulator is presented. A 4-bit fourth-order $DeltaSigma$ modulator not only performs non-dithered 16-modulo fractional-$N$ operation but also offers less spur generation with negligible quantization noise. Further spur reduction is achieved by charge compensation in the voltage domain and phase interpolation in the time domain, which significantly relaxes the dynamic range requirement of the charge pump compensation current. A 1.8–2.6 GHz fractional-$N$ PLL is implemented in 0.18 $mu{hbox {m}}$ CMOS. By employing high-order deterministic $DeltaSigma$ modulation and hybrid spur compensation, the spur level of less than $-$55 dBc is achieved when the ratio of the bandwidth to minimum frequency resolution is set to 1/4. The prototype PLL consumes 35.3 mW in which only 2.7 mW is consumed by the digital modulator and compensation circuits.      

A $DeltaSigma$ Fractional-N Synthesizer With Customized Noise Shaping for WCDMA/HSDPA Applications

This paper describes a quantization noise reduction method in $DeltaSigma$ fractional-N synthesizer design based on a semidigital approach. By employing a phase shifting technique, a low power hybrid finite impulse response (FIR) filtering is realized which is suitable for RF applications. Combined with the hybrid FIR filtering, single-loop topology makes 4th-order and 5th-order $DeltaSigma$ modulators possible for the type-2 4th-order PLL. A prototype fractional-N synthesizer is implemented in 180 nm CMOS for WCDMA/HSDPA applications. Experimental results show that the proposed method can effectively suppress out-of-band phase noise to meet the phase noise mask requirements in various RF applications.      

A Programmable 25-MHz to 6-GHz $K/L$ Frequency Multiplier With Digital $K_{rm vco}$ Compensation

A programmable rational-$K/L$ frequency multiplier that can synthesize any frequency between 25 MHz and 6 GHz from an input clock ranging from 1 to 5.5 GHz is presented. The architecture employs a fractional-$N$ input clock divider followed by a fractional- $N$ PLL. In contrast to conventional architectures, this allows large $K$ and $L$ , whose maximum values are limited only by the word-length of digital $SigmaDelta$ modulators. Additionally, to alleviate large $K_{rm vco}$ variation and fractional spurs, which are inevitable in wide tuning range VCOs and fractional-$N$ synthesizers, new compensation techniques are implemented without involving additional circuitry. This is an ideal solution to support a programmable serializer/deserializer on a field-programmable gate array.      

A 100 MS/s 4 MHz Bandwidth 70 dB SNR $Delta Sigma$ ADC in 90 nm CMOS

This paper describes the results of an implementation of a high speed $Delta Sigma$ ADC in 90 nm CMOS process, which is developed for a direct-conversion digital TV receiver. The $Delta Sigma$ ADC is based on a switched-capacitor fourth-order single-loop $Delta Sigma$ modulator with a 4-bit quantizer. The ADC uses a triple sampling technique and a two-step summation scheme for low power and high speed operation. Also, a digital signal processing block, including a decimation filter, a channel selection filter and a digital programmable gain amplifier (PGA), is implemented in the same process. The decimation filter is based on a polyphase IIR filter with a decimation ratio of 5, while the channel selection filter is based on two path lattice wave digital IIR filter. The ADC achieves 69.95 dB SNR and 66.85 dB SNDR over a 4 MHz bandwidth with a sampling frequency of 100 MHz. The fabricated $Delta Sigma$ ADC and the digital signal processing block occupy 0.53$~$mm$^2$ and 0.09 mm$^{2}$, and consume 11.76 mW per channel.      

An Edge Missing Compensator for Fast Settling Wide Locking Range Phase-Locked Loops

An edge missing compensator (EMC) is proposed to approach the function of an ideal PD with $pm 2 ^{N-1} times 2pi $ linear range with $N$-bit EMC. A PLL implemented with a 9-bit EMC achieves 320 MHz frequency hopping within 10 $~mu{hbox {s}}$ logarithmically which is about 2.4 times faster than the conventional design. The reference spur of the PLL is ${-}{hbox {48.7~dBc}}$ and the phase noise is ${-}hbox{88.31~dBc/Hz}$ at 10 kHz offset with $K_{rm VCO}= -$ 2 GHz/V.      

A 5-GHz CMOS Type-II PLL With Low $K_{rm VCO}$ and Extended Fine-Tuning Range

A 5-GHz dual-path integer-$N$ Type-II phase-locked loop (PLL) uses an LC voltage-controlled oscillator and softly switched varactors in an overlapped digitally controlled integral path to allow a large fine-tuning range of approximately 160 MHz while realizing a low susceptibility to noise and spurs by using a low $K_{rm VCO}$ of 3.2 MHz/V. The reference spur level is less than $-$70 dBc with a 1-MHz reference frequency and a total loop-filter capacitance of 26 pF. The measured phase noise is $-$75 and $-$115 dBc/Hz at 10-kHz and 1-MHz offsets, respectively, using a loop bandwidth of approximately 30 kHz. This 0.25-${hbox{mm}}^{2}$ PLL is fabricated in a 90-nm digital CMOS process and consumes 11 mW from a 1.2-V supply.      

A Wideband PLL-Based G/FSK Transmitter in 0.18 $mu$m CMOS

A wideband phase-locked loop (PLL)-based G/FSK transmitter (TX) architecture is presented in this paper. In the proposed TX, the G/FSK data is applied outside the loop; hence, the data rate is not constrained by the PLL bandwidth. In addition, the PLL remains locked all the time, preventing the carrier frequency from drifting. In this architecture, the G/FSK modulation signal is generated from a proposed Sigma-Delta modulated Phase Rotator $(SigmaDelta{hbox{-PR}})$. By properly combining the multi-phase signals from the PLL output, the $SigmaDelta{hbox{-PR}}$ effectively operates as a fractional frequency divider, which can synthesize modulation signals with fine-resolution frequencies. The proposed $SigmaDelta{hbox{-PR}}$ adopts the input signal as the phase transition trigger, facilitating a glitch-free operation. The impact of the $SigmaDelta{hbox{-PR}}$ on the TX output noise is also analyzed in this paper. The proposed TX with the $SigmaDelta{hbox{-PR}}$ is digitally programmable and can generate various G/FSK signals for different applications. Fabricated in a 0.18 $muhbox{m}$ CMOS technology, the proposed TX draws 6.3 mA from a 1.4 V supply, and delivers an output power of $-$11 dBm. With a maximum data rate of 6 Mb/s, the TX achieves an energy efficiency of 1.5 nJ/bit.      

A Noise-Coupled Time-Interleaved Delta-Sigma ADC With 4.2 MHz Bandwidth, ${-}$ 98 dB THD, and 79 dB SNDR

This paper describes a wideband high-linearity $Delta Sigma $ ADC. It uses noise coupling combined with time interleaving. Two versions of a two-channel time-interleaved noise-coupled $Delta Sigma $ ADC were realized in a 0.18- $mu{hbox {m}}$ CMOS technology. Noise coupling between the channels increases the effective order of the noise-shaping loops, provides dithering, and prevents tone generation in all loops. Time interleaving enhances the effects of noise coupling. Using a 1.5 V supply, the device achieved excellent linearity (${rm SFDR} > {hbox {100~dB}}$, ${rm THD}= -{hbox {98~dB}}$) and an SNDR of 79 dB in a 4.2 MHz signal band.      

A 47 GHz Cross-Coupled VCO Employing High- Island-Gate Varactor for Phase Noise Reduction

A 47 GHz $LC$ cross-coupled voltage controlled oscillator (VCO) employing the high-$Q$ island-gate varactor (IGV) based on a 0.13 $mu{rm m}$ RFCMOS technology is reported in this work. To verify the improvement in the phase noise, two otherwise identical VCOs, each with an IGV and a conventional multi-finger varactor, were fabricated and the phase noise performance was compared. With $V_{DD}$ of 1.2 V and core power consumption of 3.86 mW, the VCOs with the IGV and the multi-finger varactor have a phase noise of $-$95.4 dBc/Hz and $-$91.4 dBc/Hz respectively, at 1 MHz offset, verifying the phase noise reduction with the introduction of the high-$Q$ IGV. The VCO with IGV exhibited an output power of around $-$15 dBm, leading to a FoM of $-$182.9 dBc/Hz and a tuning range of 3.35% (45.69 to 47.22 GHz).      

$S$ - and $C$ -Band Ultra-Compact Phase Shifters Based on All-Pass Networks

Ultra-compact phase shifters are presented. The proposed phase-shifting circuits utilize the lumped element all-pass networks. The transition frequency of the all-pass network, which determines the size of the circuit, is set to be much higher than the operating frequency. This results in a significantly small chip size of the phase shifter. To verify this methodology, 5-bit phase shifters have been fabricated in the $S$ - and $C$ -band. The $S$ -band phase shifter, with a chip size of 1.87 mm $,times,$0.87 mm (1.63 mm $^{2}$), has achieved an insertion loss of ${hbox{6.1 dB}} pm {hbox{0.6 dB}}$ and rms phase-shift error of less than 2.8$^{circ}$ in 10% bandwidth. The $C$ -band phase shifter, with a chip size of 1.72 mm $,times,$0.81 mm (1.37 mm $^{2}$), has demonstrated an insertion loss of 5.7 dB $pm$ 0.8 dB and rms phase-shift error of less than 2.3 $^{circ}$ in 10% bandwidth.      

A Phase-Locked Loop With Injection-Locked Frequency Multiplier in 0.18-$mu{hbox{m}}$ CMOS for $V$ -Band Applications

In this paper, a novel CMOS phase-locked loop (PLL) integrated with an injection-locked frequency multiplier (ILFM) that generates the $V$-band output signal is proposed. Since the proposed ILFM can generate the fifth-order harmonic frequency of the voltage-controlled oscillator (VCO) output, the operational frequency of the VCO can be reduced to only one-fifth of the desired frequency. With the loop gain smaller than unity in the ILFM, the output frequency range of the proposed PLL is from 53.04 to 58.0 GHz. The PLL is designed and fabricated in 0.18-$mu{hbox{m}}$ CMOS technology. The measured phase noises at 1- and 10-MHz offset from the carrier are $-$ 85.2 and $-{hbox{90.9 dBc}}/{hbox{Hz}}$, respectively. The reference spur level of $-{hbox{40.16 dBc}}$ is measured. The dc power dissipation of the fabricated PLL is 35.7 mW under a 1.8-V supply. It can be seen that the advantages of lower power dissipation and similar phase noise can be achieved in the proposed PLL structure. It is suitable for low-power and high-performance $V$-band applications.      

Pulsed $I_{d}$– $V_{g}$ Methodology and Its Application to Electron-Trapping Characterization and Defect Density Profiling

The pulsed current–voltage ($I$– $V$) measurement technique with pulse times ranging from $sim$17 ns to $sim$ 6 ms was employed to study the effect of fast transient charging on the threshold voltage shift $Delta V_{t}$ of MOSFETs. The extracted $Delta V_{t}$ values are found to be strongly dependent on the band bending of the dielectric stack defined by the high-$kappa$ and interfacial layer dielectric constants and thicknesses, as well as applied voltages. Various hafnium-based gate stacks were found to exhibit a similar trap density profile.      

Analysis of Clock-Jitter Effects in Continuous-Time $Delta Sigma $ Modulators Using Discrete-Time Models

This paper proposes a simple discrete-time (DT) modeling technique for the rapid, yet accurate, simulation of the effect of clock jitter on the performance of continuous-time (CT) $Delta Sigma $ modulators. The proposed DT modeling technique is derived from the impulse-invariant transform and is applicable to arbitrary-order lowpass and bandpass CT $Delta Sigma $ modulators, with single-bit or multibit feedback digital-to-analog converters (DACs) employing delayed return-to-zero (RZ) or non-return-to-zero (NRZ) rectangular pulses. Its accuracy is independent of both the power spectrum of the clock jitter and the loop transfer function of the $Delta Sigma $ modulator.      

A 0.13 $mu$ m CMOS Quad-Band GSM/GPRS/EDGE RF Transceiver Using a Low-Noise Fractional-N Frequency Synthesizer and Direct-Conversion Architecture

This paper presents a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS/EDGE applications which adopts a direct-conversion receiver, a direct-conversion transmitter and a fractional-N frequency synthesizer with a built-in DCXO. In the GSM mode, the transmitter delivers 4 dBm of output power with 1$^{circ}$ RMS phase error and the measured phase noise is ${-}$164.5 dBc/Hz at 20 MHz offset from a 914.8$~$MHz carrier. In the EDGE mode, the TX RMS EVM is 2.4% with a 0.5 $~$dB gain step for the overall 36 dB dynamic range. The RX NF and IIP3 are 2.7 dB/ ${-}$12 dBm for the low bands (850/900 MHz) and 3 dB/${-}$ 11 dBm for the high bands (1800/1900 MHz). This transceiver is implemented in 0.13 $mu$m CMOS technology and occupies 10.5 mm$^{2}$ . The device consumes 118 mA and 84 mA in TX and RX modes from 2.8 V, respectively and is housed in a 5$,times,$ 5 mm$^{2}$ 40-pin QFN package.      

2 MHz AO $Q$ -switched ${rm TEM}_{00}$ Grazing Incidence Laser With 3 at.% Neodymium Doped Nd:YVO$_{4}$

We present a detailed experimental and theoretical study of the ultrahigh repetition rate AO $Q$ -switched ${rm TEM}_{00}$ grazing incidence laser. Up to 2.1 MHz $Q$-switching with ${rm TEM}_{00}$ output of 8.6 W and 2.2 MHz $Q$ -switching with multimode output of 10 W were achieved by using an acousto-optics $Q$ -switched grazing-incidence laser with optimum grazing-incidence angle and cavity configuration. The crystal was 3 at.% neodymium doped Nd:YVO$_{4}$ slab. The pulse duration at 2 MHz repetition rate was about 31 ns. The instabilities of pulse energy at 2 MHz repetition rate were less than ${pm}6.7hbox{%}$ with ${rm TEM}_{00}$ operation and ${pm}3.3hbox{%}$ with multimode operation respectively. The modeling of high repetition rate $Q$-switched operation is presented based on the rate equation, and with the solution of the modeling, higher pump power, smaller section area of laser mode, and larger stimulated emission cross section of the gain medium are beneficial to the $Q$-switched operation with ultrahigh repetition rate, which is in consistent with the experimental results.      

A 64 $times$ 64-Pixel CMOS Test Chip for the Development of Large-Format Ultra-High-Speed Snapshot Imagers

A 64 $times$ 64-pixel test circuit was designed and fabricated in 0.18-$mu{hbox {m}}$ CMOS technology for investigating high-speed imaging with large-format imagers. Several features are integrated into the circuit architecture to achieve fast exposure times with low-skew and jitter for simultaneous pixel snapshots. These features include an H-tree clock distribution with local and global repeaters, single-edge trigger propagation, local exposure control, and current-steering sampling circuits. To evaluate the circuit performance, test structures are periodically located throughout the 64 $times$ 64-pixel device. Measured devices have exposure times that can be varied between 75 ps to 305 ps with skew times for all pixels less than $pm$ 3 ps and jitter that is less than $pm$1.2 ps rms. Other performance characteristics are a readout noise of approximately 115 e- rms and an upper dynamic range of 310,000 e-.      

An 8.1 mW, 82 dB Delta-Sigma ADC With 1.9 MHz BW and $-$98 dB THD

A switched-capacitor low-distortion 15-level delta-sigma ADC is described. It achieves third-order noise shaping with only two integrators by using quantization noise coupling. Realized in a 0.18 $mu{hbox{m}}$ CMOS technology, it provides 81 dB SNDR, 82 dB dynamic range, and $-$98 dB THD in a signal bandwidth of 1.9 MHz. It dissipates 8.1 mW with a 1.5 $~$V power supply (analog power 4.4 mW, digital power 3.7$~$ mW). Its figure-of-merit is 0.25 pJ/conversion-step, which is among the best reported for discrete-time delta-sigma ADCs in wideband applications.      

Separated Unicast/Multicast Splitter-and-Delivery Switch and Its Use in Multicasting-Capable Optical Cross-Connect

We propose a novel separated unicast/multicast splitter-and-delivery (SUM-SaD) switch for mixed unicast and multicast traffic. Only multicast connections undergo extra splitting loss but are compensated by incorporated optical amplifiers. A typical multicasting-capable optical cross-connect is constructed by using the proposed SUM-SaDs. Theoretically, we prove that it is strictly nonblocking for both unicast and multicast connections if $d=N/2$, where $N$ and $d$ are the dimension of SUM-SaD and the number of SaD input ports, respectively. Therefore, $d$ means the maximum accommodated trees in the SUM-SaD. To save cost, $d$ can be less than $N/2$ , and the throughput performance is investigated by simulation. The results show that the throughput is improved when $d$ increases. In the experiment, we construct a 4 $times$ 4 SUM-SaD prototype and measure the bit-error rate (BER) of unicast connection, multicast connection with or without optical amplifier. There is no clear BER difference between them for the small dimensional SUM-SaD switch.      

Integrated Al O :Er Zero-Loss Optical Amplifier and Power Splitter With 40-nm Bandwidth

A combined planar lossless optical amplifier and 1 $,times,$2 power splitter device has been realized in Al$_2$ O$_3$:Er$^{3+}$ on silicon. Net internal gain was measured over a wavelength range of 40 nm across the complete telecom $C$ -band (1525–1565 nm). Calculations predict net gain in a combined amplifier and 1$,times,$ 4 power splitter device over the same wavelength range for a total injected pump power as low as 30 mW.