共查询到20条相似文献,搜索用时 0 毫秒
1.
某网架屋盖工程由结构设计软件进行设计计算,考虑到结构造型特殊且周边采用滑动支座约束,故利用有限元分析软件ANSYS对该屋盖进行了模态和静力分析作为校核。分析结果与规范对比表明:该结构的周期和模态振型符合该结构形式的特点,网架上下弦杆和腹杆的强度、稳定应力和长细比均满足规范要求;该结构满足承载力和正常使用的要求。 相似文献
2.
3.
介绍了Ф550闭口式轧机设备特点、轧机参数,包括轧机牌坊、轧辊及轴承形式、轧辊调整机构的结构设计特点。 相似文献
4.
有限元法及最优化方法是工程分析最主要的两个数学工具,将两者有机结合起来,可以实现真正意义上的冷却壁性能优化计算机辅助设计。基于正交回归设计确定冷却壁的结构组合,利用大型有限元分析软件ANSYS对不同结构参数下的铸钢冷却壁进行三维稳态温度场及应力场计算,然后通过MATLAB多目标优化设计方法计算得到铸钢冷却壁的最优结构参数。计算结果表明,优化结构参数后的冷却壁比原冷却壁最高温度下降7.88%,最大热应力下降6.14%。 相似文献
5.
文章介绍了一种新型信息舱体结构和内饰方案,舱体结构材料为铝合金材料,采取轻量化、模块化设计,通过有限元分析的方法对结构进行优化设计,满足使用要求。 相似文献
6.
7.
应用有限元分析方法,对某铝带2辊轧机机架装配系统进行了动态特性仿真,得出了固有频率和振型的变化规律,针对轧机机架的薄弱环节,通过参数化方法进行灵敏度分析和结构优化设计使系统的动态特性得到提高,该结论为高性能轧机的设计优化提供了一定的参考。 相似文献
8.
针对目前铝合金缝合机刚度较差导致缝合性能差、带材成材率下降的问题,本文构建了缝合机机架有限元模型,并以此对机架进行了静力分析及优化设计。 相似文献
9.
轧机机架的动态特性仿真与结构优化 总被引:1,自引:0,他引:1
应用有限元分析方法,对某铝带二辊轧机机架装配系统进行了动态特性仿真,得出了固有频率和振型的变化规律.针对轧机机架的薄弱环节,通过参数化方法进行灵敏度分析和结构优化设计,使系统的动态特性得到提高,该结论为高性能轧机的设计优化,提供了一定的参考. 相似文献
10.
11.
12.
对“美国家园”D座结构设计进行了系统总结,从结构选型、结构体系的确定到计算分析、剪力墙墙厚、数量及抗震能力、筏板基础等的设计作了详尽介绍。 相似文献
13.
The “Design Research Laboratory (DRL)-10 space pavilion” has been built in the early 2008 on Bedford Square, London, on the occasion of the 10th anniversary of the DRL Department at the Architectural Association Architecture School. The pavilion has been a great success and it has attracted huge interest in the architectural scene as well as in the general public. The pavilion consists of 850 individually cut fiber reinforced panels and over 2,000 joints. Its complex geometry was controlled by architects Alan Dempsey and Alvin Huang using a highly parametrized digital model. This paper is written from the point of view of the structural engineer, challenged not only by the complex geometry but also by the rather uncommon application of fiber reinforced concrete as a construction material. Physical tests on the proprietary fiber-C elements by Austrian firm Rieder as well as tests on their joints are described. Further, the paper gives information on the structural model and insight to a number of structural options that have been investigated during the design process. 相似文献
14.
15.
16.
基于Autodesk Inventor软件平台,介绍了零件的造型、装配过程以及三维参数化设计方法在轧钢机械设备设计中的应用,并对零件进行有限元分析,计算了零件的安全系数和等效应力,从而对不合格零件进行修改,优化了设计,提高了设计效率。 相似文献
17.
18.
基于Maxwell方程,建立了板坯内部电磁场的数学模型.为了满足计算机求解的需要,对数学模型进行了离散化和简化处理.使用有限元法对简化后的数学模型进行了仿真,得到了电磁场等势线图和磁力分布图.通过对磁场分布进行定性分析,得到了在其他条件不变的情况下,电磁力和电流强度、电磁力和电流频率的变化关系. 相似文献
19.
对振动台上的液体静压轴承装置进行研究,对其相关结构进行数值模拟及优化设计。在理论分析过程中,首先建立了油膜及压力场分布的数学模型,在提出了一系列假设的前提下,得到了油膜间隙中液体流动的控制方程即简化的纳维尔-斯托克斯方程及边界条件;然后采用有限元分析软件ANSYS对油膜的流场进行了计算、流体力学数值模拟以及优化设计,解出油膜的压力分布、速度分布、承载能力、流量和最优解。以数值模拟分析为基础,重点进行了试验研究以及相关问题的分析。运用计算得出的最优解,进行了一系列试验。从得到的测试数据中,分析了各种参数对油膜性能的影响规律。 相似文献
20.
This paper reports on the design and construction of a lightweight glass fiber-reinforced polymer roof structure in Basel, Switzerland. The sandwich construction allowed for an integration of static, building physical and architectural functions that enabled the prefabrication of the entire roof in only four lightweight elements that were easily transported to the site and rapidly installed. Cutting of foam blocks with a computerized numerical control machine and adhesive bonding proved to be advantageous procedures for the fabrication of the complex roof shape, without the use of expensive molds. The factor of safety of the design was adjusted during the design process through experimental verification. Although some of the characteristic material properties were overestimated in the preliminary design, the design properties for the final design were higher than for the preliminary design as it was possible to reduce the resistance factors (according to Eurocode format) after testing by a factor of 2.0. Existing design models and test standards to determine material properties proved to be applicable. 相似文献