Passive sampler for combined chemical and toxicological long-term monitoring of groundwater: the ceramic toximeter

We present the development of a passive sampling device that combines chemical with biological assessment of water following time-integrating, long-term sampling. The new device, which was designated the Ceramic Toximeter, brings together the simplicity of the Ceramic Dosimeter as a ceramic membrane-based, solid-sorbent sampler and the uniqueness of a recently developed solid-phase, solvent-free bioassay. In this bioassay, Biosilon, i.e., polystyrene polymer beads, is used to present sorbed contaminants to vertebrate cells that adhere to the contaminant-loaded Biosilon and respond. Focusing on Biosilon as sorbent, its ability to accumulate 16 polycyclic aromatic hydrocarbons (PAHs) was explored. When tested up to 42 days in the laboratory or 1 year in groundwater at a contaminated gasworks site, Biosilon-filled Ceramic Toximeters yielded back-calculated time-weighted average aqueous PAH concentrations that agreed well with concentrations obtained by frequent snapshot sampling. The chosen bioassay response, the induction of 7-ethoxyresorufin-O-deethylase, was as predicted in the laboratory setting but could only partly be explained by the analyzed PAHs in the field. Based on this first assessment, the Ceramic Toximeter emerges as a resource efficient water monitoring device with a variety of potential future applications.     

Passive sampling screening method using thin-layer chromatography plates

An in situ solid-phase extraction method, thin-layer chromatography (TLC) passive sampling, was investigated as a screening method for determining the presence of organic compounds in water using laboratory experiments and field applications. The TLC passive sampler developed in this research enables the spatial and temporal distributions of organic compounds to be determined qualitatively with little expense. The materials for the sampler developed here cost dollar 1.60 each. By first identifying the areas where a pollutant is present using the TLC passive sampling screening method, total analytical costs for monitoring programs may be reduced by eliminating unnecessary conventional analyses for locations where the pollutant is not present. Two organophosphorus pesticides, diazinon and chlorpyrifos, were used as a model for the development and as a potential application of the TLC passive sampling method. Passive sampler adsorption kinetics, enrichment factors, and extraction efficiencies were determined from batch experiments with exposure times ranging from 1 h to 4 weeks. In field applications, TLC passive sampling was conducted in natural and engineered systems with two silica gel extraction media, C2 and C18. Diazinon and chlorpyrifos were detected by analyzing the adsorbed compounds by high-performance liquid chromatography with ultraviolet detection.     

Engineered polymeric nanoparticles for bioremediation of hydrophobic contaminants

Sorption of hydrophobic organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs), to soil has been shown to limit their solubilization rate and mobility. In addition, sequestration of contaminants by sorption to soil and by partitioning in nonaqueous phase liquids (NAPLs) reduces their bioavailability. Polymeric nano-network particles have been demonstrated to increase the "effective" solubility of a representative hydrophobic organic contaminant, phenanthrene (PHEN) and to enhance the release of PHEN from contaminated aquifer material. In this study, we investigate the usefulness of nanoparticles made from a poly(ethylene) glycol modified urethane acrylate (PMUA) precursor chain, in enhancing the bioavailability of PHEN. PMUA nanoparticles are shown to increase the mineralization rate of PHEN crystal in water, PHEN sorbed on aquifer material, and PHEN dissolved in a model NAPL (hexadecane) in the presence of aquifer media. These results show that PMUA particles not only enhance the release of sorbed and NAPL-sequestered PHEN but also increase its mineralization rate. The accessibility of contaminants in PMUA particles to bacteria also suggests that particle application may be an effective means to enhance the in-situ biodegradation rate in remediation through natural attenuation of contaminants. In pump-and-treat or soil washing remediation schemes, bioreactors could be used to recycle extracted nanoparticles. The properties of PMUA nanoparticles are shown to be stable in the presence of a heterogeneous active bacterial population, enabling them to be reused after PHEN bound to the particles has been degraded by bacteria.     

Measurement of dissolved H2, O2, and CO2 in groundwater using passive samplers for gas chromatographic analyses

A simple in-situ passive dissolved gas groundwater sampler, comprised of a short length of silicone tubing attached to a gastight or other syringe, was adapted and tested for in-situ collection of equilibrium gas samples. Sampler retrieval after several days of immersion in groundwater allowed the direct injection of the sample onto a gas chromatograph (GC), simplifying field collection and sample handling over the commonly used "bubble stripping" method for H2 analyses. A GC was modified by sequencing a thermal conductivity (TC) detector followed by a reductive gas (RG) detector so that linear calibration of H2 over the range 0.2-200,000 ppmv was attained using a 0.5-mL gas sample; inclusion of the TC detector allowed the simultaneous quantification of other fixed gases (O2, CO2, He, and Ne) to which the RG detector was not responsive. Uptake kinetics for H2 and He indicated that the passive sampler reached equilibrium within 12 h of immersion in water. Field testing of these passive samplers revealed unusually large equilibrium gas-phase H2 concentrations in groundwater, ranging from 0.1 to 13.9%, by volume, in 11 monitoring wells surrounding four former radiological wastewater disposal ponds at the Y-12 plant in Oak Ridge, Tennessee.     

Integrated sampling and analytical approach for common groundwater dissolved gases

A novel passive gas diffusion sampler (PGDS) combines sampling, storage and direct injection into a single gas chromatograph (GC). The sampler has a 4.5 mL internal volume when deployed, is easy to operate, and eliminates sample-partitioning. The associated GC method analyzes for a large, dynamic sampling range from a single, small volume injection. Dissolved gases were separated on parallel Rt-Molsieve 5A and Rt-Q-PLOT columns and eluted solutes were quantified using a pulse discharge helium ionization detector (PD-HID). The combined sampling and analytical method appears to be less prone to systematic bias than conventional sampling and headspace partitioning and analysis. Total dissolved gas pressure used in tandem with the PGDS improved the accuracy of dissolved gas concentrations. The incorporation of routine measurements of dissolved biogeochemical and permanent gases into groundwater investigations will provide increased insight into chemical and biological processes in groundwater and improve chemical mass balance accuracy.     

Field trial and modeling of uptake rates of in situ lipid-free polyethylene membrane passive sampler

Lipid-free polyethylene membrane tubing (LFT) has been further developed in response to a growing need for an inexpensive and simple time-integrative sampling device for dissolved hydrophobic contaminants in water. The LFT sampler is based on the diffusion of dissolved hydrophobic target compounds through the aqueous boundary layer and into the polyethylene membrane, mimicking uptake by organisms. We demonstrate through laboratory and field validation studies that LFT provided the same benefits as many other passive sampling devices, withoutthe potential of analytical interference from lipid impurities. A total of 370 LFTs and semipermeable membrane devices were deployed for 21 days in paired studies at highly urbanized, undeveloped, and two Superfund sites, representing several river conditions. A simple internal surrogate spiking method served as an in situ calibration indicator of the effects of environmental conditions on the uptake rates. A modified extraction method for the LFT increased recoveries while decreasing solvent use and labor compared to other organic extraction procedures. LFT sampling rates were estimated using ratios, in situ calibration and modeling for over 45 target analytes, including PAHs, PCBs, and pesticides.     

Field testing passive air samplers for current use pesticides in a tropical environment

Air was sampled for one year in the central valley of Costa Rica using an active high-volume sampler as well as passive samplers (PAS) based on polyurethane foam (PUF) disks and XAD-resin filled mesh cylinders. Extracts were analyzed for pesticides that are either banned or currently used in Costa Rican agriculture. Sampling rates for PUF-based passive air samplers, determined from the loss of depuration compounds spiked on the disks prior to deployment averaged 5.9 +/- 0.9 m3 x d(-1) and were higher during the windier dry season than during the rainy season. Sampling rates for the XAD-based passive sampler were determined from the slopes of linear relationships that were observed between the amount of pesticide sequestered in the resin and the length of deployment, which varied from 4 months to 1 year. Those sampling rates increased with decreasing molecular size of a pesticide, and their average of 2.1 +/- 1.5 m3 x d(-1) is higher than rates previously reported for temperate and polar sampling sites. Even though the trends of the sampling rate with molecular size and temperature are consistent with the hypothesis that molecular diffusion controls uptake in passive samplers, the trends are much more pronounced than a direct proportionality between sampling rate and molecular diffusivity would suggest. Air concentrations derived by the three sampling methods are within a factor of 2 of each other, suggesting that properly calibrated PAS can be effective tools for monitoring levels of pesticides in the tropical atmosphere. In particular, HiVol samplers, PUF-disk samplers, and XAD-based passive samplers are suitable for obtaining information on air concentration variability on the time scale of days, seasons and years, respectively. This study represents the first calibration study for the uptake of current use pesticides by passive air samplers.     

Influence of sampler configuration on the uptake kinetics of a passive air sampler

Passive air samplers (PAS) are simple and cost-effective tools to monitor semivolatile organic compounds in air. Chemical uptake occurs by molecular diffusion from ambient air to a passive sampling medium (PSM). Previous calibration studies indicate that even for the same type of PAS, passive air sampling rates (R, m(3)(air)/d) can be highly variable due to the influence of a number of factors. Earlier studies mainly focused on factors (e.g., wind speed and temperature) influencing R via the kinetic resistance posed by the air boundary layer surrounding the PSM because that layer was deemed to be the main factor determining the uptake kinetics. Whereas recent calibration studies suggest that the PAS configuration can influence R, so far few studies have specifically focused on this factor. In this study, with the objective to understand the effect of PAS configurations on R, we applied a gravimetrical approach to study the kinetics of water vapor uptake from indoor air by silica gel placed inside cylindrical PAS of various configurations. We also conducted an indoor calibration for polychlorinated biphenyls on the same type of PAS using XAD-resin as the PSM. R was found to be proportional to the interfacial transfer area of the PSM but not the amount of the PSM because chemicals mainly accumulated in the outer layer of the PSM during the deployment time of the PAS. The sampler housing and the PSM can introduce kinetic resistance to chemical uptake as indicated by changes in R caused by positioning the PSM at different distances from the opening of the sampler housing and by using PSM of different diameters. Information gained from this study is useful for optimizing the PAS design with the objective to reduce the material and shipping costs without sacrificing sampling efficiency.     

Characterizing uptake kinetics of PAHs from the air using polyethylene-based passive air samplers of multiple surface area-to-volume ratios

Polyethylene passive sampling devices (PSDs) were deployed to investigate how passive samplers of multiple surface area-to-volume ratios could be used to characterize uptake kinetics for polyaromatic hydrocarbons (PAHs). Theoretically, uptake profiles for different thickness PSDs of the same surface area should show the following: where uptake is linear, the amount of compound accumulated in the different PSDs will be the same and where equilibrium is approached, the amount accumulated by the different PSDs will be proportional to sampler thickness. Polyethylene sheets of the same surface area and approximately 100 and 200 microm thickness were collected after 30, 60, and 90 days of exposure along with samples from a codeployed high volume sampler. Twelve priority pollutant PAHs could be routinely quantified in replicate PSDs. Overall, reproducibility between replicate PSDs was satisfactory, with normalized differences rarely exceeding 25%. The smallest analytes quantified, fluorene, phenanthrene, and anthracene, were shown to approach equilibrium during the deployment period, whereas uptake for fluoranthene and pyrene moved into the curvilinear stage. For most of the larger molecular weight PAHs such as indeno[1,2,3-cd]pyrene, uptake could be described using a linear uptake model. Preliminary sampling rates for the compounds which remained in the linear stage of uptake ranged between 0.5 and 1.5 m3 d(-1) dm(-2). Sampler to air partition coefficients were estimated for PAHs which approached equilibrium and predicted for some of the other compounds. Results suggest that a single deployment of PSDs with multiple surface area-to-volume ratios can be sufficient to determine whether uptake was linear or approaching equilibrium for a range of PAHs.     

Engineered polymeric nanoparticles for soil remediation

Hydrophobic organic groundwater contaminants, such as polynuclear aromatic hydrocarbons (PAHs), sorb strongly to soils and are difficult to remove. We report here on the synthesis of amphiphilic polyurethane (APU) nanoparticles for use in remediation of soil contaminated with PAHs. The particles are made of polyurethane acrylate anionomer (UAA) or poly(ethylene glycol)-modified urethane acrylate (PMUA) precursor chains that can be emulsified and cross-linked in water. The resulting particles are of colloidal size (17-97 nm as measured by dynamic light scattering). APU particles have the ability to enhance PAH desorption and transport in a manner comparable to that of surfactant micelles, but unlike the surface-active components of micelles, the individual cross-linked precursor chains in APU particles are not free to sorb to the soil surface. Thus, the APU particles are stable independent of their concentration in the aqueous phase. In this paper we show that APU particles can be engineered to achieve desired properties. Our experimental results show that the APU particles can be designed to have hydrophobic interior regions that confer a high affinity for phenanthrene (PHEN) and hydrophilic surfaces that promote particle mobility in soil. The affinity of APU particles for contaminants such as PHEN can be controlled by changing the size of the hydrophobic segment used in the chain synthesis. The mobility of colloidal APU suspensions in soil is controlled by the charge density or the size of the pendent water-soluble chains that reside on the particle surface. Exemplary results are provided illustrating the influence of alternative APU particle formulations with respect to their efficacy for contaminant removal. The ability to control particle properties offers the potential to produce different nanoparticles optimized for varying contaminant types and soil conditions.     

Passive sampling and analyses of common dissolved fixed gases in groundwater

An in situ passive sampling and gas chromatographic protocol was developed for analysis of the major and several minor fixed gases (He, Ne, H2, N2, O2, CO, CH4, CO2, and N2O) in groundwater. Using argon carrier gas, a HayeSep DB porous polymer phase, and sequential thermal conductivity and reductive gas detectors, the protocol achieved sufficient separation and sensitivity to measure the mixing ratio of all these gases in a single 0.5 mL gas sample collected in situ, stored, transported, and injected using a gastight syringe. Within 4 days of immersion in groundwater, the simple passive in situ sampler, whether initially filled with He or air, attained an equivalent and constant mixing ratio for five of the seven detected gases. The abundant mixing ratio of N2O, averaging 2.6%, indicated that significant denitrification is likely ongoing within groundwater contaminated with uranium, acidity, nitrate, and organic carbon from a group of four closed radioactive wastewater seepage ponds at the Oak Ridge Field Research Center. Over 1000 passive gas samples from 12 monitoring wells averaged 56% CO2, 32.4% N2, 2.6% O2, 2.6% N2O, 0.21% CH4, 0.093% H2, and 0.025% CO with an average recovery of 95 +/- 14% of the injected gas volume.     

草甘膦残留动态对茶叶安全风险的预警分析

采用高效液相色谱-串联质谱法建立了茶树不同部位（根、茎、叶）和土壤草甘膦、氨甲基膦酸的快速检测,其中茶树经超纯水提取,土壤经KOH溶液提取,提取液过C18固相萃取柱净化,然后在硼酸钠缓冲溶液中与9-芴基甲基三氯甲烷（FMOC-Cl）进行衍生反应,其衍生产物在C18色谱柱上以5 mmol/L乙酸铵溶液和乙腈为流动相(含0.1%甲酸)进行梯度洗脱,采用电喷雾离子源、正离子扫描和多反应监测模式检测,同位素内标法定量,系统地研究了提取条件对草甘膦检测影响,结果表明：草甘膦和氨甲基膦酸在2.5~80 ng/mL内线性关系良好,相关系数大于0.999,该方法定量限为0.05 mg/kg。对空白茶树和土壤分别添加0.05、0.40和1.60 mg/kg 3个浓度水平的草甘膦和氨甲基膦酸,平均回收率为76.95%~112.57%,相对标准偏差为2.01%~6.83%（n=4）。该方法快速灵敏稳定,适用于茶树中不同部位和土壤中草甘膦残留的检测。残留动态试验表明：在施药剂量为0.3 g/m2时,草甘膦在叶部的富集量是最大的。随着时间延长,草甘膦在茶树各部位以及土壤中的残留量逐渐降低,且在土壤中的降解速率最快,此研究可为后续草甘膦在非标靶茶树中的吸收、转运和代谢提供技术支持。     

Development and calibration of a passive sampler for perfluorinated alkyl carboxylates and sulfonates in water

Perfluorinated chemicals (PFCs) are emerging environmental contaminants with a global distribution. Due to their moderate water solubility, the majority of the environmental burden is assumed to be in the water phase. This work describes the application of the first passive sampler for the quantitative assessment of concentrations of perfluorinated alkylcarboxylates (PFCAs) and sulfonates (PFSAs) in water. The sampler is based on a modified Polar Organic Chemical Integrative Sampler (POCIS) with a weak anion exchange sorbent as a receiving phase. Sampling rates were between 0.16 and 0.37 L d(-1), and the duration of the kinetic sampling stage was between 2.2 and 13 d. A field deployment in the most urbanized estuary in Australia (Sydney Harbour) showed trace level concentrations from passive samplers (0.1-12 ng L(-1)), in good agreement with parallel grab sampling (0.2-16 ng L(-1)). A separate field comparison of the modified POCIS with standard POCIS suggests the latter may have application for PFC sampling, but with a more limited range of analytes than the modified POCIS which contains a sorbent with a mixed mode of action.     

A flow-through sampler for semivolatile organic compounds in air

A widely acknowledged limitation of current passive air sampling designs for semivolatile organic chemicals is their relatively low sampling rate, severely constraining the temporal resolution that can be achieved. Addressing the need for an improved sampling design which achieves significantly faster uptake while maintaining the capability of providing quantitative information, a new sampler has been developed that provides greatly increased sampling rates by forcing the wind to blow through the sampling medium. The sampler consists of a horizontally oriented, aerodynamically shaped, stainless steel flow tube mounted on a post with ball bearings, which turns into the wind with the help of vanes. A series of polyurethane foam (PUF) discs with relatively large porosity mounted inside the flow tube serve as the sampling medium. The sampled air volume is calculated from wind speed, which is measured outside the sampler and after passage through the sampling medium using precalibrated vortex rotor and turbine anemometers mounted on top of the sampler and at the exit of the flow tube, respectively. Small battery-operated data loggers are used for data storage. Under typical wind speed conditions, the sampler can collect 100 m(3)/ day, which is approaching the sampling rates of conventional high volume samplers. Controlled experiments in the laboratory and frontal chromatography theory yield the theoretical plate number and breakthrough volumes for polychlorinated biphenyls and polycyclic aromatic hydrocarbons in the PUF plugs and allow for the estimation of breakthrough levels for relatively volatile organic chemicals. After correction for breakthrough, the air concentration obtained with the new flow-through sampler are independent of sampling length and volume and compare favorably with those obtained from conventional pumped high volume samples.     

Evaluation of passive samplers for assessment of community exposure to toxic air contaminants and related pollutants

The precision, accuracy, and sampling rates of Radiello and Ogawa passive samplers were evaluated in the laboratory using a flow-through chamber and under field conditions prior to their use in the 2007 Harbor Community Monitoring Study (HCMS), a saturation monitoring campaign in the communities adjacent to the Ports of Los Angeles and Long Beach. Passive methods included Radiello samplers for volatile organic compounds (benzene, toluene, ethylbenzene, xylenes, 1,3-butadiene), aldehydes (formaldehyde, acetaldehyde, acrolein) and hydrogen sulfide, and Ogawa samplers for nitrogen oxides and sulfur dioxide. Additional experiments were conducted to study the robustness of the passive sampling methods under variable ambient wind speed, sampling duration, and storage time before analysis. Our experimentally determined sampling rates were in agreement with the rates published by Radiello and Ogawa with the following exceptions: we observed a diffusion rate of 22.4 ± 0.1 mL/min for benzene and 37.4 ± 1.5 mL/min for ethylbenzene compared to the Radiello published values of 27.8 and 25.7 mL/min, respectively. With few exceptions, the passive monitoring methods measured one-week average ambient concentrations of selected pollutants with sensitivity and precision comparable to conventional monitoring methods averaged over the same period. Radiello Carbograph 4 VOC sampler is not suitable for the collection of 1,3-butadiene due to backdiffusion. Results for the Radiello aldehyde sampler were inconclusive due to lack of reliable reference methods for all carbonyl compounds of interest.     

Leaching of metribuzin metabolites and the associated contamination of a sandy Danish aquifer

As degradation products of metribuzin have received little attention as potential groundwater contaminants, we evaluated leaching of metribuzin and its primary metabolites desaminometribuzin (DA), desaminodiketometribuzin (DADK), and diketometribuzin (DK) at a sandy test site in Denmark. Soil water and groundwater were sampled monthly over a four-year period. Leaching of metribuzin and DA was negligible. DK and DADK leached from the root zone (1 meter below ground surface (mbgs)) in average concentrations considerably exceeding the EU limit value for drinking water (0.1 microg/L). Both metabolites appear to be relatively stable and persisted in soil water and groundwater several years after application. Past application of metribuzin at the site had contaminated the groundwater with both DK and DADK, which were detected in 99% and 48%, respectively, of the groundwater samples analyzed. Except for three of the groundwater samples, the DADK concentration never exceeded the EU limit value. In contrast, the annual concentration of DK exceeded 0.1 microg/L at 90% of the screens analyzed. The present findings suggest that as the degradation products of metribuzin can leach through sandy soil in high concentrations, they could potentially contaminate the groundwater. In view of this risk DK and DADK should both be included in monitoring programs and their ecotoxicological effects should be further investigated.     

Passive monitoring method for 3-ethenylpyridine: a marker for environmental tobacco smoke

A new method was developed to assess environmental tobacco smoke in air. The method is based on passive sampling and subsequent measurement of the concentration of 3-ethenylpyridine, a vapor-phase compound specific to tobacco smoke. Air samples were collected using a 3M organic vapor monitor. Tests were carried out in a dynamic chamber to determine the sampling rate (25.7 cm3/min). 3-Ethenylpyridine was desorbed from the sampler with 1 mL of pyridine/toluene mixture. 3-Ethenylpyridine was quantified by gas chromatography/mass spectrometry. The limit of detection was 0.01 microgram/sample, corresponding to a concentration of 0.27 microgram/m3 air calculated for a sampling period of 24 h. Field measurements were carried out to test the performance of the method. Mean concentrations ranging from 1.3 to 5.3 micrograms/m3 were measured for 3-ethenylpyridine in smoking environments, but no 3-ethenylpyridine was detected in nonsmoking environments. Active sampling using charcoal tubes was used as a reference method in the chamber tests and field measurements. Individual exposures can be easily and accurately measured by means of the passive sampler. Because of simple sample treatment, the method is also well-suited for large-scale monitoring of environmental tobacco smoke.     

Characterization and comparison of three passive air samplers for persistent organic pollutants

The accumulation of persistent organic pollutants by three passive sampling media--semipermeable membrane devices (SPMDs), polyurethane foam (PUF) disks, and an organic-rich soil--was investigated. The media were exposed to contaminated indoor air over a period of 450 days, and concentrations in the air and in the media were monitored for individual polychlorinated biphenyl (PCB) congeners and polychlorinated naphthalene homologue groups. Uptake was initially linear and governed by the surface area of the sampler and the boundary layer airside mass transfer coefficient (MTC). Mean values of the MTC were 0.13, 0.11, and 0.26 cm s-1 for SPMD, PUF, and soil, respectively. As the study progressed, equilibrium was established between ambient air and the passive sampling media for the lower molecular weight PCB congeners. This information was used to calculate passive sampler-air partition coefficients, KPSM-A. These were correlated to the octanol-air partition coefficient, and the resulting regressions were used to predict KPSM-A for the full suite of PCBs. Information on MTC, KPSM-A, surface area, and effective thickness of each sampler was used to estimate times to equilibrium for each medium. These ranged from tens of days for the lower molecular weight congeners to tens of years for the higher molecular weight PCBs. Expressions were also developed to relate the amount of chemical accumulated by the passive sampling media to average ambient air concentrations over the integration period of the sample.     

Passive air sampling using semipermeable membrane devices at different wind-speeds in situ calibrated by performance reference compounds

Semipermeable membrane devices (SPMDs) are passive samplers used to measure the vapor phase of organic pollutants in air. This study tested whether extremely high wind-speeds during a 21-day sampling increased the sampling rates of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), and whether the release of performance reference compounds (PRCs) was related to the uptakes at different wind-speeds. Five samplers were deployed in an indoor, unheated, and dark wind tunnel with different wind-speeds at each site (6-50 m s(-1)). In addition, one sampler was deployed outside the wind tunnel and one outside the building. To test whether a sampler, designed to reduce the wind-speeds, decreased the uptake and release rates, each sampler in the wind tunnel included two SPMDs positioned inside a protective device and one unprotected SPMD outside the device. The highest amounts of PAHs and PCBs were found in the SPMDs exposed to the assumed highest wind-speeds. Thus, the SPMD sampling rates increased with increasing wind-speeds, indicating that the uptake was largely controlled by the boundary layer at the membrane-air interface. The coefficient of variance (introduced by the 21-day sampling and the chemical analysis) for the air concentrations of three PAHs and three PCBs, calculated using the PRC data, was 28-46%. Thus, the PRCs had a high ability to predict site effects of wind and assess the actual sampling situation. Comparison between protected and unprotected SPMDs showed that the sampler design reduced the wind-speed inside the devices and thereby the uptake and release rates.     

Aquatic passive sampling of herbicides on naked particle loaded membranes: accelerated measurement and empirical estimation of kinetic parameters

Water-sampler equilibrium partitioning coefficients and aqueous boundary layer mass transfer coefficients for atrazine, diuron, hexazionone and fluometuron onto C18 and SDB-RPS Empore disk-based aquatic passive samplers have been determined experimentally under a laminar flow regime (Re = 5400). The method involved accelerating the time to equilibrium of the samplers by exposing them to three water concentrations, decreasing stepwise to 50% and then 25% of the original concentration. Assuming first-order Fickian kinetics across a rate-limiting aqueous boundary layer, both parameters are determined computationally by unconstrained nonlinear optimization. In addition, a method of estimation of mass transfer coefficients--therefore sampling rates--using the dimension-less Sherwood correlation developed for laminar flow over a flat plate is applied. For each of the herbicides, this correlation is validated to within 40% of the experimental data.The study demonstrates that for trace concentrations (sub 0.1 microg/L) and these flow conditions, a naked Empore disk performs well as an integrative sampler over short deployments (up to 7 days) for the range of polar herbicides investigated. The SDB-RPS disk allows a longer integrative period than the C18 disk due to its higher sorbent mass and/or its more polar sorbent chemistry. This work also suggests that for certain passive sampler designs, empirical estimation of sampling rates may be possible using correlations that have been available in the chemical engineering literature for some time.