Volumetric properties under pressure for 1-fluoro-1,2,2-trichloroethane (R131) and 1,1-difluoro-1,2,2-trichloroethane (R122)

The effect of pressure on the volume of R131 and R122 is reported for six temperatures covering the range 278.15 to 338.13 K and pressures up to 380 MPa. Densities at the same temperatures have been measured at atmospheric pressure for each liquid. The experimental data have been used to calculate isothermal compressibilities, thermal expansivities, and internal pressures: the change in isobaric heat capacity from its value at atmospheric pressure has also been estimated. The modified Tait equation has been used to show that the volume ratios for both compounds can be combined with those for R123 (2,2-dichloro-1,1,1-trifluoroethane) and represented by a common equation.     

Measurements of the thermal conductivity of liquid R32, R124, R125, and R141b

This paper reports measurements of the thermal conductivity of refrigerants R32, R124, R125, and R141b in the liquid phase. The measurements, covering a temperature range from 253 to 334 K and pressure up to 20 MPa, have been performed in a transient hotwire instrument employing two anodized tantalum wires. The uncertainty of the present thermal-conductivity data is estimated to be ±0.5%. The experimental data have been represented by polynomial functions of temperature and pressure for the purposes of interpolation. A comparison with other recent measurements is also included.     

An automated volumometer: Thermodynamic properties of 1,1-dichloro-2,2,2-trifluoroethane (R123) for temperatures of 278.15 to 338.15 K and pressures of 0.1 to 380 MPa

An automated bellows volumometer is described which is capable of obtaining p-V-T data in the form of volume ratios for pressures up to 380 MPa. Volume ratios for 1,1-dichloro-2,2,2-trifluoroethane (R123) have been measured for six temperatures in the range of 278.15 to 338.15 K in the liquid phase. The accuracy of the volume ratios is estimated to be ±0.05 to 0.1% for the experimental temperatures up to 298.15 K and better than ±0.15% for temperatures above the normal boiling point of R123 (300.15 K). They agree with the literature data (which do not extend beyond 4 MPa) within the experimental uncertainty of those results. Isothermal compressibilities, isobaric expansivities, internal pressures, and isobaric molar heat capacities have been evaluated from the volumetric data. The pressure dependence of isobaric molar heat capacities obtained from the data generally agree with the pressure dependence of experimentally measured literature values within the latter's accuracy of ±0.4%.     

Measurements of the viscosity of liquid R22, R124, and R125 in the temperature range 273–333 K at pressures up to 17 MPa

Viscosity masurements of refrigerants R22, R124, and R125 in the liquid phase have been performed in the temperature range 273–333 K and at pressures up to about 17 MPa. A vibrating-wire instrument has been employed. The overall uncertainty of the experimental values is estimated to be ±0.5%. The experimental data have been represented by polynomial functions of temperature and pressure for the purposes of interpolation.     

Equations of state for the thermodynamic properties of R32 (difluoromethane) and R125 (pentafluoroethane)

Thermodynamic properties of difluoromethane (R32) and pentafluoroethane (R125) are expressed in terms of 32-term modified Benedict-Webb-Rubin (MBWR) equations of state. For each refrigerant, coefficients are reported for the MBWR equation and for ancillary equations used to fit the ideal-gas heat capacity and the coexisting densities and pressure along the saturation boundary. The MBWR coefficients were determined with a multiproperty fit that used the following types of experimental data: PVT: isochoric, isobaric, and saturated-liquid heal capacities; second virial coefficients; and properties at coexistence. The respective equations of stale accurately represent experimental data from 160 to 393 K and pressures to 35 MPa for R32 and from 174 to 448 K and pressures to 68 MPa for R125 with the exception of the critical regions. Both equations give reasonable results upon extrapolation to 500 K and 60 MPa. Comparisons between predicted and experimental values are presented.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado. U.S.A.     

Liquid Thermal Conductivity of Ternary Mixtures of Difluoromethane (R32), Pentafluoroethane (R125), and 1,1,1,2-Tetrafluoroethane (R134a)1

The thermal conductivities of ternary refrigerant mixtures of difluoromethane (R32), pentafluoroethane (R125), and 1,1,1,2-tetrafluoroethane (R134a) in the liquid phase have been measured by the transient hot-wire method with one bare platinum wire. The experiments were performed in the temperature range of 233 to 323 K and in the pressure range of 2 to 20 MPa at various compositions. The measured data are correlated as a function of temperature, pressure, and composition. From the correlation, we can calculate the thermal conductivity of pure refrigerants and their binary or ternary refrigerant mixtures. The uncertainty of the measurements is estimated to be ±2%.     

Viscosity of Gaseous R404A, R407C, R410A, and R507

This paper presents new measurements of the viscosity of gaseous R404A (52 wt% R143a, 44 wt% R125, 4 wt% R134a), R407C (23 wt% R32, 25 wt% R125, 52 wt% R143a), R410A (50 wt% R32, 50 wt% R125), and R507 (50 wt% R143a, 50 wt% R125). These mixtures are recommended as substitutes for the refrigerants R22, R502, and R13B1. Measurements were carried out in an oscillating-disk viscometer. The obtained values of the viscosity are relative to the viscosity of nitrogen. The experiments were performed at atmospheric pressure over the temperature range 297 to 403 K. and near the saturation line up to pressures of 0.6 P _crit. The estimated uncertainty of the reported viscosities are ±0.5% for the viscosities at atmospheric pressure and ± 1% along the saturation line, being limited by the accuracy of the available vapor pressure and density data. The experimental viscosities at atmospheric pressure are employed to determine the intermolecular potential parameters, and , which provide the optimum representation of the data with the aid of the extended law of corresponding states developed by Kestin et al. A comparison of the experimental viscosity data with the values calculated by REFPROP, both at atmospheric pressure and along the saturation line, is presented.     

Measurements of the viscosity of R11, R12, R141b,and R152a in the temperature range 270–340 K at pressures up to 20 MPa

This paper reports new measurements of the liquid viscosity of R11, R12, R1416, and R152a in the temperature range 270 to 340 K and pressures up to 20 MPa. The measurements have been carried out in a vibrating-wire instrument calibrated with respect to the standard reference value of the viscosity of water. It is estimated that the uncertainty of the present viscosity data is one of 0.5%. The experimental data have been represented by polynomial functions of temperature and pressure for the purposes of interpolation. A recently developed semiempirical scheme, based on considerations of hard-sphere theory, is employed to correlate successfully the viscosity and the thermal conductivity of these refrigerants as a function of their density.     

Volumetric and thermodynamic properties of liquid 2-fluoroethanol

p-V T data for liquid 2-fluoroethanol (FE) have been obtained in the form of volume ratios at six temperatures (278.15, 288.15, 298.14, 313.14, 323.14, and 338.130 K) at pressures from atmospheric to 314 MPa or higher. Freezing pressures have also been measured in the temperature range from the normal freezing point to 288 K. Densities at atmospheric pressure in the same temperature range as that for thep V T data are also reported. Isothermal compressibilities, isobaric expansivities, changes in the isobaric heat capacity, and internal pressures have been calculated from the volumetric data. Representation of the volume ratios for FE, 2,2-difluoroethanol, 2,2,2-trifluoroethanol, and ethanol by a form of the modified Tait equation shows that the effect of the progressive substitution of fluorine into ethanol cannot be represented by a simple correlation.     

Measurements of the viscosity of R134a and R32 in the temperature range 270–340 K at pressures up to 20 MPa

This paper reports new measurements of the liquid viscosity of R134a and R32 in the temperature range 270 to 340 K and pressures up to 20 MPa. The measurements have been carried out in a vibrating-wire instrument calibrated with respect to the standard reference value of the viscosity of water. It is estimated that the uncertainty of the present viscosity data is one of 0.5%. The experimental data have been represented by polynomial functions of temperature and pressure for the purposes of interpolation.     

Thermodynamic properties of liquid 2,2-difluoroethanol

p-V-T data for liquid 2,2-difluoroethanol (DFE) have been obtained in the form of volume ratios at six temperatures, 278.15, 288.15, 298.15, 313.15, 323.15, and 338.15 K, at pressures from atmospheric to 151 MPa or higher. Densities at atomospheric pressure in the same temperature range are also reported. Isothermal compressibilities, isobaric expansivities, and internal pressures have been calculated from the volumetric data. They show that DFE is much less compressible than 2,2,2-trifluoroethanol and indicate that 2-fluoroethanol may be even less compressible.     

Experimental Determination of Isobaric Heat Capacities of R227 (CF<Subscript>3</Subscript>CHFCF<Subscript>3</Subscript>) from 223 to 283 K at Pressures up to 20 MPa.

A new experimental method for measuring isobaric heat capacity c_p down to 223 K at pressures up to 30 MPa was developed with the aim to study alternative refrigerants at sub-ambient temperatures and elevated pressures. The experiments are carried out in a batch mode, using a differential fluxmetric calorimeter Setaram BT-215, equipped with a customized high-pressure unit. The measurements are performed at constant pressure with a continuous scan of temperature. First, the method was tested at atmospheric pressure with methanol in the temperature range 223–283 K. The relative deviation from recommended isobaric heat capacity data in the literature is about 0.5%. Second, the measurements were performed at pressure up to 18.2 MPa with an alternative refrigerant R134a (1,1,1,2-tetrafluoroethane) of well-known heat capacity. Our results agree with representative literature values within 0.4%. New original results were obtained for refrigerant R227 (1,1,1,2,3,3,3-heptafluoropropane) in the temperature range from 223 to 283 K and at pressures of 1.1, 5, 10, 15, and 20 MPa. The consistency of our isobaric heat capacities with calorimetric values above 273 K and with pVT data reported in the literature is discussed.     

Isochoric Heat Capacity Measurements for Binary Refrigerant Mixtures Containing Difluoromethane (R32), Pentafluoroethane (R125), 1,1,1,2-Tetrafluoroethane (R134a), and Trifluoroethane (R143a) from 200 to 345 K at Pressures to 35 MPa

Molar heat capacities at constant volume C _v were measured for binary refrigerant mixtures with an adiabatic calorimeter with gravimetric determinations of the amount of substance. Temperatures ranged from 200 to 345 K, while pressures extended up to 35 MPa. Measurements were conducted on liquid samples with equimolar compositions for the following binary systems: R32/R134a, R32/R125, R125/R134a, and R125/R143a. The uncertainty is 0.002 K for the temperature rise and is 0.2% for the change-of-volume work, which is the principal source of uncertainty. The expanded relative uncertainty (with a coverage factor k=2 and thus a two-standard deviation estimate) for C _v is estimated to be 0.7%.     

Correlations for the viscosity of 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) and trans-1,3,3,3-tetrafluoropropene (R1234ze(E))

Due to concerns about global warming, there is interest in 2,3,3,3-tetrafluoroprop-1-ene (R1234yf) and trans-1,3,3,3-tetrafluoropropene (R1234ze(E)) as potential replacements for refrigerants with high global warming potential (GWP). In this paper we survey available data and provide viscosity correlations that cover the entire fluid range including vapor, liquid, and supercritical regions. The correlation for R1234yf is valid from the triple point (220 K) to 410 K at pressures up to 30 MPa, and the correlation for R1234ze(E) is valid from the triple point (169 K) to 420 K at pressures up to 100 MPa. The estimated uncertainty for both correlations at a 95% confidence level is 2% for the liquid phase over the temperature range 243 K to 363 K at pressures to 30 MPa, and 3% for the gas phase at atmospheric pressure.     

Vapor pressures of new fluorocarbons

The vapor pressures of four fluorocarbons have been measured at the following temperature ranges: R123 (2,2-dichloro-l,l,l-trifluoroethane), 273–457 K; R123a (1,2-dichloro-1,1,2-trifluoroethane), 303–458 K; R134a (1,1,1,2-tetrafluoroethane), 253–373 K; and R132b (l,2-dichloro-l,l-difluoroethane), 273–398 K. Determinations of the vapor pressure were carried out by a constant-volume apparatus with an uncertainty of less than 1.0%. The vapor pressures of R123 and R123a are very similar to those of R11 over the whole experimental temperature range, but the vapor pressures of R134a and R132b differ somewhat from those of R12 and R113, respectively, as the temperature increases. The numerical vapor pressure data can be fitted by an empirical equation using the Chebyshev polynomial with a mean deviation of less than 0.3 %.     

Thermal conductivity of R134a and R141b within the temperature range 240–307 K at the saturation vapor pressure

New, absolute values of the thermal conductivity of two refrigerants, R134a and R141b, in the liquid phase at saturation are reported. The measurements have been performed in transient hot-wire instruments making use of electrically insulated tantalum wires within the temperature range 240–307 K. The results are estimated to have an accuracy of ±1%.     

Measurements of the thermal conductivity of R11 and R12 in the temperature range 250–340 K at pressures up to 30 MPa

This paper reports new, absolute measurements of the thermal conductivity of liquid refrigerants R11 and R12 in the temperature range 250–340 K at pressures from saturation up to 30 MPa. The measurements, performed in a new transient hot-wire instrument employing two anodized tantalum wires, have an estimated uncertainty of ±0.5%. Measurements of the thermal conductivity of toluene in the temperature range 250–340 K at pressures up to 30 MPa are also reported.     

The vapor pressure of 1,1,1,2-tetrafluoroethane (R134a) and chlorodifluoromethane (R22)

We measured the vapor pressure of chlorodifluoromethane (commonly known as R22) at temperatures between 217.1 and 248.5 K and of 1,1,1,2-tetrafluoroethane (commonly known as R134a) in the temperature range 214.4 to 264.7 K using a comparative ebulliometer. For 1,1,1,2-tetrafluoroethane at pressures between 220.8 and 1017.7kPa (corresponding to temperatures in the range 265.6 to 313.2K), additional measurements were made with a Burnett apparatus. We have combined our results for 1,1,1,2-tetrafluoroethane with those already published from this laboratory at higher pressures to obtain a smoothing equation for the vapor pressure from 215 K to the critical temperature. For chlorodifluoromethane our results have been combined with certain published results to provide an equation for the vapor pressure at temperatures from 217 K to the critical temperature.     

Liquid Thermal Conductivity of Binary Mixtures of Pentafluoroethane (R125) and 1,1,1,2-Tetrafluoroethane (R134a)

Thermal conductivities of zeotropic mixtures of R125 (CF₃CHF₂) and R134a (CF₃CH₂F) in the liquid phase are reported. Thermal conductivities have been measured by a transient hot-wire method with one bare platinum wire. Measurements have been carried out in the temperature range of 233 to 323 K and in the pressure range of 2 to 20 MPa. The dependence of thermal conductivity on temperature, pressure, and composition of the binary mixture is presented. Measured thermal conductivity data are correlated as a function of temperature, pressure, and overall composition of the mixture. The uncertainty of our measurements was estimated to be better than 2%.