Methyl Esters (Biodiesel) from and Fatty Acid Profile of Gliricidia sepium Seed Oil

Increasing the supply of biodiesel by defining and developing additional feedstocks is important to overcome the still limited amounts available of this alternative fuel. In this connection, the methyl esters of the seed oil of Gliricidia sepium were synthesized and the significant fuel‐related properties were determined. The fatty acid profile was also determined with saturated fatty acids comprising slightly more than 35 %, 16.5 % palmitic, 14.5 % stearic, as well as lesser amounts of even longer‐chain fatty acids. Linoleic acid is the most prominent acid at about 49 %. Corresponding to the high content of saturated fatty acid methyl esters, cold flow is the most problematic property as shown by a high cloud point of slightly >20 °C. Otherwise, the properties of G. sepium methyl esters are acceptable for biodiesel use when comparing them to specifications in biodiesel standards but the problematic cold flow properties would need to be observed. The ¹H‐ and ¹³C‐NMR spectra of G. sepium methyl esters are reported.     

Anthracene Biodegradation by Oleaginous Rhodococcus opacus for Biodiesel Production and Its Characterization

This study examined biodegradation of anthracene, a model low molecular weight polycyclic aromatic hydrocarbon (PAH) by oleaginous Rhodococcus opacus for biodiesel production. Specific biomass growth rate (µ) in the range of 0.0075–0.0185 h^?1 could be attained over the initial anthracene concentration (50–500 mg L^?1), along with 68–70.6% (w/w) lipid accumulation. 10% (v/v) inoculum size showed more positive effect than 5% (v/v) inoculum size on both anthracene biodegradation efficiency and lipid accumulation by R. opacus. ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy of the bacterial lipids revealed 82.25% saturated fatty acids content. Furthermore, the transesterified bacterial lipids predominantly consisted of methyl palmitate (32.4%) and methyl stearate (25.9%) as the major fatty acid methyl esters (FAMEs). Overall, this study revealed a very good potential of the bacterium for the production of biodiesel from PAH-containing wastewater.     

An empirical approach in predicting biodiesel viscosity at various temperatures

A thermodynamic model is proposed for the determination of kinematic viscosities of saturated fatty acid methyl esters (FAMEs) of various chain lengths at different temperatures. The linearity of the natural logarithm of viscosity-carbon number, plot is limited to a narrow carbon number range. The predicted viscosities of FAMEs of C_12:0-C_18:0, which are commonly found in vegetable oils and used as biodiesels, agree well with the experimental values. The highest difference is 0.354 cSt (5.60%), for methyl stearate at 40 °C. When the proposed method for viscosity calculation of saturated FAMEs are used in combination with the methods for viscosities of biodiesel the mixtures, the predicted viscosities agree well with the values reported in the literatures and the measured values. The differences between the predicted viscosities and those reported in the literatures (at 40 °C) are 1.08 to 8.56% (for eight different vegetable oil methyl esters). The differences between the predicted viscosities and the measured values for coconut methyl esters, at 25, 40 and 50 °C are 9.20, 5.53 and 5.57%, respectively. The differences are slightly higher than those of palm oil methyl esters (4.48, 2.06 and 2.48%, respectively).The proposed method can also be applied to predict the viscosities of free fatty acids and it is speculated it may be applied to other homologous series as well.     

Fatty acid methyl ester as reactive diluent in thermally cured solvent-borne coil-coatings—The effect of fatty acid pattern on the curing performance and final properties

Four different fatty acid methyl esters (FAMEs): rape seed methyl ester (RME), tall oil methyl ester (TOME), and two types of linseed oil methyl ester (Linutin) have been studied as reactive diluents in thermally cured solvent-borne coil-coatings. The purpose was to evaluate the effect of fatty acid methyl ester structure on the curing performance and final properties of the coating. The permanent incorporation of the reactive diluent via transesterification reaction has been followed with ¹H NMR analysis of model systems. Dynamic mechanical analysis (DMA) measurements, of free-standing films, show that the glass transition temperature (T_g) decreases upon addition of the reactive diluent. Both the amount of incorporated reactive diluent and the final film properties are affected by the number and placement of alkene-bonds in the FAME.     

Degradation of fatty acid methyl esters in biodiesels exposed to sunlight and seawater

The degradation of fatty acid methyl esters (FAMEs) has been characterized in selected biodiesels exposed to sunlight and seawater, and markers are identified that can be used to match a weathered biodiesel spill to its source. Samples of one synthetic and three commercial biodiesels were subjected to a regime of controlled weathering for 71 days. Experiments were designed to promote photo-oxidation, biodegradation or a combination of both processes. The FAME compositions of the biodiesels were measured by GC-MS at various times. Unsaturated FAMEs were preferentially degraded by photo-oxidation. Saturated C16 and C18 FAMEs were the most persistent compounds. The diagnostic ratio C16:0/(C16:0 + C18:0), calculated from the peak area of the total ion chromatograms (TICs), varied by less than 2% (RSD) during 71 days of weathering and could be used to distinguish among the biodiesels studied.     

Rapid Characterization of Fatty Acids in Oleaginous Microalgae by Near-Infrared Spectroscopy

The key properties of microalgal biodiesel are largely determined by the composition of its fatty acid methyl esters (FAMEs). The gas chromatography (GC) based techniques for fatty acid analysis involve energy-intensive and time-consuming procedures and thus are less suitable for high-throughput screening applications. In the present study, a novel quantification method for microalgal fatty acids was established based on the near-infrared spectroscopy (NIRS) technique. The lyophilized cells of oleaginous Chlorella containing different contents of lipids were scanned by NIRS and their fatty acid profiles were determined by GC-MS. NIRS models were developed based on the chemometric correlation of the near-infrared spectra with fatty acid profiles in algal biomass. The optimized NIRS models showed excellent performances for predicting the contents of total fatty acids, C16:0, C18:0, C18:1 and C18:3, with the coefficient of determination (R²) being 0.998, 0.997, 0.989, 0.991 and 0.997, respectively. Taken together, the NIRS method established here bypasses the procedures of cell disruption, oil extraction and transesterification, is rapid, reliable, and of great potential for high-throughput applications, and will facilitate the screening of microalgal mutants and optimization of their growth conditions for biodiesel production.     

Production of mixed methyl/ethyl esters from waste fish oil through transesterification with mixed methanol/ethanol system

Biodiesel (mixed fatty acid methyl/ethyl esters) was prepared from waste fish oil through base-catalyzed transesterification with mixed methanol/ethanol system. Effect of methanol/ethanol (% v/v), type and concentration of the catalyst, mixed alcohols to oil molar ratio, the reaction temperature, and the reaction time on the biodiesel yield was optimized. Maximum biodiesel yield (97.30?wt%) was produced by implementing 1:1 methanol/ethanol (v/v), 1.0?wt% KOH, 6:1 mixed alcohols to oil molar ratio, 40°C reaction temperature, and 30?min of reaction time. Conversion of the waste fish oil to mixed methyl/ethyl esters was confirmed by ¹H NMR spectroscopy. Fuel properties of the resulting biodiesel in addition to its blends with petrodiesel were in good agreement with specifications of ASTM D6751 and ASTM D7467, respectively. Therefore, it was concluded that using mixed alcohol system for biodiesel production could reduce the production cost through reducing conditions required for maximum conversion.     

Using proton nuclear magnetic resonance as a rapid response research tool for methyl ester characterization in biodiesel

Reliable and rapid analysis remains a high priority for quality control in biodiesel production. Quantifying biodiesel with alternative analytical tools such as proton nuclear magnetic resonance (¹H NMR) can provide total methyl esters distributions without significant sample pretreatment. Using unique spectra of individual methyl esters, we investigate the feasibility of using ¹H NMR spectroscopy to identify and quantify relative and absolute concentrations of methyl esters in a biodiesel.     

Evaluation of biodiesel obtained from cottonseed oil

Esters from vegetable oils have attracted a great deal of interest as substitutes for petrodiesel to reduce dependence on imported petroleum and provide a fuel with more benign environmental properties. In this work biodiesel was prepared from cottonseed oil by transesterification with methanol, using sodium hydroxide, potassium hydroxide, sodium methoxide and potassium methoxide as catalysts. A series of experiments were conducted in order to evaluate the effects of reaction variables such as methanol/oil molar ratio (3:1–15:1), catalyst concentration (0.25–1.50%), temperature (25–65 °C), and stirring intensity (180–600 rpm) to achieve the maximum yield and quality. The optimized variables of 6:1 methanol/oil molar ratio (mol/mol), 0.75% sodium methoxide concentration (wt.%), 65 °C reaction temperature, 600 rpm agitation speed and 90 min reaction time offered the maximum methyl ester yield (96.9%). The obtained fatty acid methyl esters (FAME) were analyzed by gas chromatography (GC) and ¹H NMR spectroscopy. The fuel properties of cottonseed oil methyl esters (COME), cetane number, kinematic viscosity, oxidative stability, lubricity, cloud point, pour point, cold filter plugging point, flash point, ash content, sulfur content, acid value, copper strip corrosion value, density, higher heating value, methanol content, free and bound glycerol were determined and are discussed in the light of biodiesel standards such as ASTM D6751 and EN 14214.     

General properties and the fatty acid composition of the oil from the mophane caterpillar, Imbrasia belina

A preliminary investigation of the bulk properties of the oil from the edible mophane caterpillar (phane), Imbrasia belina, showed a significant difference in the iodine values of the oils from mature and young phane. Detailed analysis of the fatty acid composition of the two oil samples was thus carried out by capillary gas chromatography (GC) and complemented with ¹H and ¹³C nuclear magnetic resonance (NMR) studies to investigate the degree of unstauration in the two oil samples. While these studies showed that the oil samples from the mature and young mophane caterpillar were much the same in fatty acid composition, the data revealed a significant divergence from a literature report on phane oil. This earlier report puts the ratio of total saturated to total unsaturated fatty acids at approximately 1:1 (48.2:48.8, in percentages) and estimates the fatty acid composition for the major fatty acids as 16:0 (31.9%), 18:0 (15.2%), 18:1 (20.4%), 18:2 (9.9%), and 18:3 (19%). The data collected from the present work, however, showed the fatty acid composition for total saturated and total unsaturated fatty acids to be 40.5 and 57.0%, respectively. This work estimated the fatty acid composition for the major fatty acids as 16:0 (27.2%), 18:0 (12.3%), 18:1 (16.1%), 18.2 (10.7%), and 18:3 (29.0%). Thus, linolenic acid was the most abundant fatty acid in the phane oil. The GC results of the present analysis were largely corroborated by studies of the composition of fatty acid classes in the phane oil estimated from integrals of ¹H and ¹³C NMR signals. Oils from other edible Lepidoptera larvae are also known to be much richer in unsaturated than saturated fatty acids.     

Preparation of a CaO Nanocatalyst and Its Application for Biodiesel Production Using Butea monosperma Oil: An Optimization Study

CaO nanoparticles (NP) were synthesized through solution combustion using crude glycerin (biodiesel by‐product) as the combustion fuel. The synthesized CaO NP were characterized using Fourier transform infrared spectrometer (FTIR), X‐ray diffractometer (XRD), temperature programmed desorption of carbon dioxide (CO₂‐TPD), scanning electron microscope (SEM), and transmission electron microscope (TEM). The CaO NP were successfully used as a catalyst for biodiesel synthesis. Response surface methodology was used to determine the optimal conditions for biodiesel production from Butea monosperma oil (BMO) using central composite design. A total of 20 experiments were designed and conducted to study the effects of the methanol to BMO molar ratio, reaction time, and catalyst loading conditions on the biodiesel yield. A yield of 96.2% of Butea monosperma methyl ester (BMME or biodiesel) was obtained under optimum conditions, namely a molar ratio (methanol to BMO) of 9:1, a reaction time of 70 min, a catalyst loading of 1.60 wt%, a constant temperature of 65 °C, and an agitation speed of 600 rpm. The fatty‐acid composition of BMO was characterized through gas chromatography. Finally, BMME was characterized using FTIR, ¹H NMR, and ¹³C NMR, and the fuel properties of BMME were determined using the test methods of the American Society for Testing and Materials.     

13C nuclear magnetic resonance spectroscopic analysis of the triacylglycerol composition ofBiota orientalis and carrot seed oil

¹³C nuclear magnetic resonance (NMR) spectroscopic analysis of the whole oil (triacylglycerols) ofBiota orientalis seeds confirms the presence of oleate [18:1(9Z)], linoleate [18:2(9Z, 12Z)], linolenate [18:3((9Z, 12Z, 15Z)], 20:3 (5Z, 11Z, 14Z), 20:4(5Z, 11Z, 14Z, 17Z), and saturated fatty acids in the acyl groups by comparing the observed carbon shifts with previously established shift data for model triacylglycerols. This technique shows that the saturated, 20:3 and 20:4 fatty acids are distributed mainly in the α-acyl positions, whereas oleate, linoleate, and linolenate are randomly acylated to the α- and β-positions of the glycerol “backbone”. Stereospecific hydrolysis of theBiota oil with pancreatic lipase, followed by chromatographic analysis of fatty esters, reveals the presence of trace amounts of 16:0(0.7%), 18:0(0.5%), 20:3 (0.4%), and 20:4 (1.3%) in the β-position of the glycerol “backbone”, which are undetectable by¹³C NMR technique on the whole oil. Semiquantitative assessment of the¹³C NMR signal intensities gives the relative percentages of the fatty acid distribution as: saturated 16:0, 18:0 (12.0% α-acyl), oleate (7.7% α-acyl 8.7% β-acyl), total linoleate and linolenate (31.7% α-acyl; 24.2% βacyl), total 20:3 and 20:4 (15.7% α-acyl). The¹³C NMR spectroscopic analysis of carrot seed oil identifies the presence of saturated (18:0), 18:1(6Z), 18:1(9Z), and 18:2(9Z, 12Z). The saturated fatty acid is found in the α-acyl positions. Semi-quantitative assessment of the signal intensities gives the relative percentages of the fatty acids as: 18:0 (4.5% α-acyl), 18:1(6Z) (49.6% α-acyl; 19.7% β-acyl), oleate (6.5% α-acyl; 8.6% β-acyl) and linoleate (5.2% α-acyl; 6.9% β-acyl).     

Production of alkenyl succinic anhydrides from low‐erucic and low‐linolenic rapeseed oil methyl esters

Fatty acid methyl esters from low‐erucic and low‐linolenic rapeseed oil were used to produce alkenyl succinic anhydrides. A second‐order Doehlert uniform network design was used to investigate the influence of the reaction temperature and the molar ratio between the maleic anhydride and the main unsaturated rapeseed oil methyl esters on the yield of alkenyl succinic anhydride from methyl oleate. Further subjects of investigation were the conversion of methyl oleate, the formation of side reaction products, the Gardner color of the product and its viscosity, and finally the content of maleic anhydride remaining in the medium after the reaction. Alkenyl succinic anhydride from methyl oleate was isolated by column chromatography and analyzed by IR, ¹H‐ and ¹³C‐NMR and MS. The optimal reaction conditions for obtaining the maximum yield of alkenyl succinic anhydride from methyl oleate in the experimental domain (80%) were 210‐220 °C and a maleic anhydride/rapeseed oil methyl ester molar ratio of 1.5. However, the products synthesized in these conditions showed a high degree of viscosity (0.45 kg m^?1 s^?1), a very dark color (18 Gardner color) and a high content of undesirable side products (6%), which could hinder their industrial use. A molar ratio of less than 1.5 led to a clearer and less viscous product, although with a lower alkenyl succinic anhydride content.     

Biodiesel synthesis via homogeneous Lewis acid-catalyzed transesterification

Lewis acids (AlCl₃ or ZnCl₂) were used to catalyze the transesterification of canola oil with methanol in the presence of terahydrofuran (THF) as co-solvent. The conversion of canola oil into fatty acid methyl esters was monitored by ¹H NMR. NMR analysis demonstrated that AlCl₃ catalyzes both the esterification of long chain fatty acid and the transesterification of vegetable oil with methanol suggesting that the catalyst is suitable for the preparation of biodiesel from vegetable oil containing high amounts of free fatty acids. Optimization by statistical analysis showed that the conversion of triglycerides into fatty acid methyl esters using AlCl₃ as catalyst was affected by reaction time, methanol to oil molar ratio, temperature and the presence of THF as co-solvent. The optimum conditions with AlCl₃ that achieved 98% conversion were 24:1 molar ratio at 110 °C and 18 h reaction time with THF as co-solvent. The presence of THF minimized the mass transfer problem normally encountered in heterogeneous systems. ZnCl₂ was far less effective as a catalyst compared to AlCl₃, which was attributed to its lesser acidity. Nevertheless, statistical analysis showed that the conversion with the use of ZnCl₂ differs only with reaction time but not with molar ratio.     

Identification of α-parinaric acid in the seed oil ofSebastiana brasiliensis sprengel (Euphorbiaceae)

Besides some usual fatty acids, the seed oil ofSabastiana brasiliensis (Euphorbiaceae) contains up to 39% (estimated by ultraviolet spectroscopy) of α-parinaric acid (cis, trans, trans, cis-9, 11, 13, 15-octadecatetraenoic acid). The fatty acids were analyzed by gas chromatography and gas chromatography/mass spectrometry as their methyl esters. The structure of α-parinaric acid was proven by a combination of chemical and spectroscopic methods, conducted with the crude oil, the methyl ester mixture, and the isolated fatty acid methyl ester. Complete assignment of the¹H and¹³C nuclear magnetic resonance (NMR) shifts of α-parinaric acid was carried out by two-dimensional NMR experiments Presented in part at the 21st world Congress and Exhibition of the International Society for Fat Research (ISF), October 1–6, 1995, The Hague, The Netherlands.     

微波辐射酸催化喜树种子油制备生物柴油工艺

研究了在微波辐射条件下硫酸催化酯交换反应转化喜树种子油制备生物柴油的工艺,同时采用HPLC分析了生物柴油产品中主要脂肪酸甲酯成分及其质量分数。通过实验考察了醇油摩尔比、反应时间、反应温度、催化剂加入质量分数对反应的影响,并得出了在微波辐射下硫酸催化喜树种子油制备生物柴油的最佳工艺条件:醇油摩尔比15∶1、微波辐射时间40 min、反应温度70℃、催化剂加入质量分数(与原料油)3%,转化率可达95%以上。结果表明,与传统硫酸催化酯交换反应相比,该方法具有催化剂加入质量分数少、反应温度低、时间短和转化率高等优点,对工业化制备生物柴油提供了科学参考价值。     

Determination of Polyunsaturated Fatty Esters (PUFA) in Biodiesel by GC/GC–MS and <Superscript>1</Superscript>H-NMR Techniques

In the present work, methods based on Gas Chromatography (GC), Gas Chromatography–Mass Spectrometry (GC–MS) and ¹H-NMR techniques was developed for the characterization and estimation of Polyunsaturated Fatty Esters (PUFA) in biodiesel. The GC method enables the separation, identification and estimation of these polyunsaturated fatty acid methyl esters to be carried out using a highly polar capillary column (100% cyanopropyl silicon). GC–MS was utilized for unambiguous identification and estimation of esters and isomers present in biodiesel. The estimation of PUFA content is important because PUFA content is a part of the EN 14214 specifications of biodiesel. There is no existing standard method for the estimation of total PUFA content in biodiesel. The developed GC method also quantifies EPA and DHA (C20:5 and C22:6) fatty acid methyl esters which can be used as markers for the estimation of fish oil biodiesel. The presence of EPA and DHA indicates the contamination of fish oil in biodiesel. Further, the ¹H-NMR technique has also been employed to identify and estimate PUFA containing ≥3 double bonds. The PUFA content was estimated from the integral intensities of the chemical shift region corresponding to all type of double bonds in the ¹H-NMR spectra. Based on the developed method, GC fingerprinting of various biodiesel samples was carried out to estimate a PUFA content as low as 1,000 ppm.     

Synthesis of economically viable biodiesel from waste frying oils (WFO)

In present communication, waste frying oil (WFO) has been used as a feedstock for biodiesel synthesis. WFO, procured from a local Indian restaurant possessed an acid value of 0.84 mg KOH/g, which is low enough for single step transesterification reaction. Biodiesel (fatty acid methyl esters) was washed after transesterification reaction and the yield got lowered substantially (from 96% to 86.36%) after water washing owing to loss of esters. 30:100 vol% (methanol to oil), 0.6 wt% NaOCH₃, 60°C temperature and 600 rpm agitation in 1 h reaction time was found to be optimum for transesterification reaction. ¹H NMR spectrum showed a high conversion (95.19%) of fatty acids in WFO to biodiesel in 2 h reaction time. Almost complete conversion (99.68%) was attained in 2 h reaction time. © 2011 Canadian Society for Chemical Engineering     

Enzymatic Synthesis of Tyrosol-Based Phenolipids: Characterization and Effect of Alkyl Chain Unsaturation on the Antioxidant Activities in Bulk Oil and Oil-in-Water Emulsion

Oxidative stability of lipids is one of the most important parameters affecting their quality. Lipase‐catalyzed lipophilic tyrosyl esters with an equivalent carbon alkyl chain but different degrees of unsaturation (C18:0 to C18:4n3) were prepared, characterized, and used as antioxidants. Free fatty acids and fatty acid ethyl esters (substrate molar ratio tyrosol: acyl donor, 1:10) were used as acyl donors and immobilized lipase from Candida antarctica was the biocatalyst (10 %). The phenolipids were isolated and characterized using ESI–MS, ¹H‐NMR, and ¹³C‐NMR. Peroxide value (PV) and para‐anisidine value (p‐AV) were measured to evaluate their antioxidant activities in bulk oil structured lipid (SL) and in an oil‐in‐water emulsion (SL‐based infant formula). No significant difference was found in yield and reaction time between the two types of acyl donors. However, as the unsaturation of the fatty acids increased the reaction time also increased. In SL, tyrosyl esters exhibited lower antioxidant activity than tyrosol whereas the addition of an alkyl chain enhanced the antioxidant efficiency of tyrosol in infant formula. Tyrosyl oleate was the most efficient antioxidant in the emulsion system followed by tyrosyl stearate and tyrosyl linoleate. These results suggest that the synthesized phenolipids may be used as potential antioxidants in lipid‐based products.     

Fatty acids of Thespesia populnea: Mass spectrometry of picolinyl esters of cyclopropene fatty acids

Thespesia populnea belongs to the plant family of Malvaceae which contain cyclopropane and cyclopropene fatty acids. However, previous literature reports vary regarding the content of these compounds in Thespesia populnea seed oil. In this work, the content of malvalic acid (8,9‐methylene‐9‐heptadecenoic acid) in the fatty acid profile of Thespesia populnea seed oil was approximately 7% by GC. Two cyclopropane fatty acids were identified, including dihydrosterculic acid. The methyl and picolinyl esters of Thespesia populnea seed oil were also prepared. The mass spectrum of picolinyl malvalate was more closely investigated, especially an ion at m/e 279, which does not fit the typical series of ions observed in picolinyl esters. It is shown that this ion is caused by cleavage at the picolinyl moiety and contains the fatty acid chain without the picolinyl moiety. This type of cleavage has previously not been observed prominently in picolinyl esters and may therefore be diagnostic for picolinyl esters of cyclopropene fatty acids. The NMR spectra of Thespesia populnea methyl esters are also discussed. Practical applications: The work reports the fatty acid composition of Thespesia seed oil whose derivatives have not yet been extensively utilized for industrial purposes, for example, biodiesel. Knowing this composition is essential for understanding potential uses and, for example, in case of biodiesel the fuel properties. Besides this issue, some data (mass spectrometry and NMR) crucial for obtaining the composition information are analyzed in detail. The biodiesel properties of methyl esters of Thespesia populnea will be reported separately.