Synthesis and properties of flux-cast refractories in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Details are given of the synthesis and testing of flux-cast refractory materials in the alumina-rich region of the Al₂O₃-MgO-B₂O₃ system; XRD and petrography indicate that the main structure-forming phases are corundum and magnesian spinel. In subordinate amounts there are the boroaluminate 9Al₂O₃·2B₂O₃ and the previously unknown compound 4Al₂O₃·MgO·2B₂O₃, whose composition has been established by microprobe analysis. Corrosion tests showed that three-component systems containing magnesium and boron oxides at levels of 5–10% do not increase the corrosion resistance of refractories in molten sodium-calcium-silicate glass and electrovacuum borosilicate glass. __________ Translated from Novye Ogneupory, No. 3, pp. 161–163, March, 2008.     

Study on the properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO lead-free glass using in the electronic pastes

The Sb₂O₃ doping lead-free glass in Bi₂O₃-B₂O₃-BaO ternary system were prepared in the composition of several different subsystem, and the glass powder was produced through the process of water quenching. Glass transition temperatures (T _g ), glass soften temperatures(T _s ), the volume resistivity (ρ) in the temperature range of 80–200°C, and linear thermal coefficients of expansion in the temperatures range of 25–300°C (α_25–300) were measured for subsystems along with the different ratio of Bi₂O₃, B₂O₃ and BaO. For these subsystems, T _g ranged from 458 to 481°C, and T _s ranged from 490 to 512°C, both decreasing with the increasing of Bi₂O₃/B₂O₃ ratio, and increasing with the increasing of BaO/B₂O₃ ratio. The measured α_25–300 ranged from 65.3 to 76.3 × 10⁻⁷ K⁻¹, with values increasing with increasing Bi₂O₃/B₂O₃ and BaO/B₂O₃ ratio. The volume resistivity remains at a high standards, which may caused by it’s non-alkali composition, and it fluctuated from 10¹³ to 10¹¹ Ω cm with the temperature varied from 80–200°C. The structure of Bi₂O₃-B₂O₃-BaO ternary leadfree glass system was mearsured by FT-IR. The IR studies indicate that these glasses are made up of [BiO₆], [BO₃], and [BO₄] basic structural units, and it appears that Ba²⁺ acts as a glass-modifier in this ternary system, but the Bi³⁺ has entered the glass network when it is in relative high content so as to change the α_25–300, T _s and T _g .     

Oxygen permeability and structural stability of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>0.2</Subscript>Fe<Subscript>0.8</Subscript>O<Subscript>3−<Emphasis Type="Italic">δ</Emphasis></Subscript> membrane

La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ oxides were synthesized by citrate method and hydrothermal method. The oxides prepared by citrate method are perovskite type structure, while the oxides by hydrothermal method have a small amount of secondary phase in the powder. Pyrex glass seal and Ag melting seal provided reliable gas-tight sealing of disk type dense membrane in the range of operation temperature, but commercial ceramic binder could not be removed from the support tube without damage to the tube or membrane. Though the degree of gas tightness increases in the order of glass>Ag>ceramic binder, in the case of glass seal, the undesired spreading of glass leads to an interfacial reaction between it and the membrane and reduction of effective permeation area. The oxygen flux of La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ membrane increases with increasing temperature and decreasing thickness, and the oxygen permeation flux through 1.0 mm membrane exposed to flowing air (P _h =0.21 atm) and helium (P₁=0.037 atm) is ca. 0.33 ml/cm²·min at 950 °C. X-ray diffraction analysis for the membrane after permeation test over 160 h revealed that La₂O₃ and unknown compound were formed on the surface of membrane. The segregation compounds of surface elements formed on both surfaces of membrane irrespective of spreading of glass sealing material. This paper was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Chemical and electrochemical characterization of TiO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> atomic layer depositions on AZ-31 magnesium alloy

In this study, innovative TiO₂/Al₂O₃ mono/multilayers were applied by atomic layer depositions (ALD) on ASTM-AZ-31 magnesium/aluminum alloy to enhance its well-known scarce corrosion resistance. Four different configurations of ALD layers were tested: single TiO₂ layer, single Al₂O₃ layer, Al₂O₃/TiO₂ bilayer and Al₂O₃/TiO₂/Al₂O₃/TiO₂ multilayer deposited using Al[(CH₃)]₃ (trimethylaluminum, TMA), and TiCl₄ and H₂O precursors. All depositions were performed at 120°C to obtain an amorphous-like structure of both oxide layers. The four coatings were then investigated using different techniques, such as scanning electron microscope (SEM), stylus profilometer, glow discharge optical emission spectrometry (GDOES) and polarization curves in 0.05-M NaCl solution. The thickness of all the coatings was around 100 nm. The layers compositions were successfully investigated by the GDOES technique, although obtained data seem to be affected by substrate roughness and differences in sputtering rates between ceramic oxides and metallic magnesium alloy. Corrosion resistance showed to be strongly enhanced by the nanometric coatings, giving lower corrosion current densities in 0.05-M NaCl media with respect to the uncoated substrate (from 10⁻⁴ to 10⁻⁶ A/cm² for the single layers and from 10⁻⁴ to 10⁻⁸ A/cm² for the bi- and multilayers). All polarization curves on coated samples also showed a passive region, wider for the bi-layer (from −0.58 to −0.43 V with respect to Ag/AgCl) and multilayer (from −0.53 to −0.38 V with respect to Ag/AgCl) structures.     

Thermal and neutron shielding properties of <Superscript>10</Superscript>B<Subscript>2</Subscript>O<Subscript>3</Subscript>/polyimide hybrid materials

In this study, ¹⁰B₂O₃/polyimide (PI) hybrid materials were synthesized with the aim to improve their thermal stability and neutron shielding properties. 3,3′-Diaminodiphenyl sulfone (DADPS) reacted with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) in N-methyl-2-pyrrolidone (NMP) and mixed with amine functionalized ¹⁰B₂O₃ to prepare a series of poly (amic acid), meanwhile, corresponding PIs were obtained via the thermal imidization procedures. The morphologies and structures of the prepared hybrid materials were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). The thermooxidative and flame retardancy properties of the PI films were examined by thermogravimetric analysis (TGA) and limiting oxygen ındex (LOI). The experimental results showed that as the amount of functionalized ¹⁰B₂O₃ was increased, flame retardant properties of the hybrid films were increased. Hybrid materials were also irradiated with thermal neutrons. The neutron shielding properties increasing depends on the amount and the distribution of the ¹⁰B isotope.     

The Structure of Fusion-Cast High-Chrome Oxide Refractories in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> - MgO - Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System

The phase composition and structure of fusion-cast refractories composed of 57.0 – 84.2% Cr₂O₃, 4.3 – 36.1% MgO, 2.0 – 9.7% Al₂O₃, and 2.4 – 6.9% SiO₂ have been studied by petrographic and x-ray spectral microprobe analysis methods. Refractories high in MgO with modulus M = (Cr₂O₃ +Al₂O₃)/MgO = 1.64 – 3.1 are shown to consist of spinel phase Mg(Cr, Al)₂O₄ and silicate glass. Refractory materials (80.8 – 84.2% Cr₂O₃, 4.3 – 4.7% MgO, 2.0 – 9.7% Al₂O₃, and 2.7 – 6.9% SiO₂ with M = 18.7 – 20.2) are three-phase systems composed of spinel, escolaite, and glass phase. These materials, owing to their high corrosion resistance, have promising potentiality for practical applications.__________Translated from Novye Ogneupory, No. 12, pp. 69 – 74, December, 2004.     

Combustion synthesis of some compounds in the Li<Subscript>2</Subscript>O-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> system

At least four compounds, viz. LiAlO₂, LiAl₅O₈, Li₅AlO₄ and Li₂Al₄O₇, are known in the Li₂O-Al₂O₃ system. These compounds are important for several technological applications. Combustion synthesis of these compounds using urea as a fuel was attempted. LiAlO₂ and LiAl₅O₈ could be successfully prepared by choosing the starting materials in required stoichiometric ratios. Li₂Al₄O₇ was not obtained as a pure phase; γ-LiAlO₂ was formed as an impurity phase. Li₅AlO₄ could not be prepared by combustion process. Some phosphors based on these aluminates could also be prepared. Activation of these aluminates with Fe³⁺, Mn⁴⁺, Cu⁺, etc. was successfully achieved. Excitation and emission spectra for LiAl₅O₈: Fe³⁺, LiAl₅O₈: Mn²⁺, and Li₂Al₄O₇: Cu⁺ are reported.     

Polystyrene-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite solid polymer electrolyte for lithium secondary battery

In a common salt-in-polymer electrolyte, a polymer which has polar groups in the molecular chain is necessary because the polar groups dissolve lithium salt and coordinate cations. Based on the above point of view, polystyrene [PS] that has nonpolar groups is not suitable for the polymer matrix. However, in this PS-based composite polymer-in-salt system, the transport of cations is not by segmental motion but by ion-hopping through a lithium percolation path made of high content lithium salt. Moreover, Al₂O₃ can dissolve salt, instead of polar groups of polymer matrix, by the Lewis acid-base interactions between the surface group of Al₂O₃ and salt. Notably, the maximum enhancement of ionic conductivity is found in acidic Al₂O₃ compared with neutral and basic Al₂O₃ arising from the increase of free ion fraction by dissociation of salt. It was revealed that PS-Al₂O₃ composite solid polymer electrolyte containing 70 wt.% salt and 10 wt.% acidic Al₂O₃ showed the highest ionic conductivity of 9.78 × 10^-5 Scm^-1 at room temperature.     

Initiation of combustion of a CH<Subscript>4</Subscript>-O<Subscript>2</Subscript> mixture in a supersonic flow with excitation of O<Subscript>2</Subscript> molecules by an electric discharge

The possibility of intensification of ignition of a methane-oxygen mixture in a supersonic flow behind the front of an oblique shock wave by means of excitation of O₂ molecules to the states a ¹Δ_g and b ¹Σ_g⁺ in an electric discharge is discussed. Through numerical simulations, activation of O₂ molecules by an electric discharge is demonstrated to speed up chain reactions in the CH₄-O₂ mixture and to reduce the induction-zone length. Even a small amount of energy input to O₂ molecules in the discharge (≈3·0⁻² J/cm³) can reduce the ignition-delay length by a factor of hundreds and initiate combustion at distances of ≈1 m from the discharge zone at comparatively low temperatures of the gas behind the front (≈1000 K) and moderate pressures (≈10⁵ Pa). Excitation of O₂ molecules by an electric discharge is much more efficient than simple heating of the mixture. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 3, pp. 3–16, May–June, 2008.     

Random Copolymers with 2,2′-Dioxy-1,1′-biphenyl-phosphazene and Chiral 2,2′-dioxy-1,1′-binaphthylphosphazene Units Functionalized in the 6,6′-Positions with PPh<Subscript>2</Subscript> Groups as Precursors for Ru(arene) Catalysts

The chiral phosphazene copolymers {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₂)]_0.1} (1) and {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₀Br₂)]_0.1} _n (2) [(O₂C₁₂H₈) = 2,2′-dioxy-1,1′-biphenyl; (O₂C₂₀H₁₂) = R-2,2′-dioxy-1,1′-binaphthyl and (O₂C₂₀H₁₀Br₂) = R-6,6′-dibromo-2,2′-dioxy-1,1′-binaphthyl] were prepared by sequential substitution from [NPCl₂] _n and the corresponding dihydroxy-biphenyl or binaphthyl reagents in the presence of Cs₂CO₃ and K₂CO₃. The reaction of (2) with ^tBuLi in THF, followed by addition of PPh₂Cl and a treatment with SiHCl₃/PPh₃ to eliminate any oxidized OC₆H₄P(O)Ph₂ groups, gave the phosphine containing copolymer {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₀[PPh₂]₂)]_0.1} _n (3), that was used as a chiral ligand to support [Ru(p-cymene)Cl] complexes. The resulting catalyst was active for hydrogen transfer from isopropyl alcohol to acetophenone but the placement of the Ru centers in the 6,6′-positions of the binaphthoxyphosphazene units induced no enantioselectivity. Dedicated to Professor Christopher Allen.     

Glass formation region and order of formation of crystalline phases in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The glass formation region in the SrO-B₂O₃-SiO₂ system has been refined. The order of formation of crystalline phases in the system has been investigated at SrO contents of 50–75 mol %. It has been demonstrated that, at low temperatures, the 2SrO · SiO₂ and 3SrO · B₂O₃ phases crystallize first irrespective of the composition. The congruent melting temperature of the 3SrO · B₂O₃ · SiO₂ compound is determined to be 1180 ± 10°C. The triangulation previously performed for the SrO-B₂O₃-SiO₂ system in the concentration range 50–75 mol % SrO has been confirmed.     

Improvement in dielectric and mechanical performance of CaCu<Subscript>3.1</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12.1</Subscript> by addition of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

The properties of CaCu_3.1Ti₄O_12.1 [CC3.1TO] ceramics with the addition of Al₂O₃ nanoparticles, prepared via a solid-state reaction technique, were investigated. The nanoparticle additive was found to inhibit grain growth with the average grain size decreasing from approximately 7.5 μm for CC3.1TO to approximately 2.0 μm for the unmodified samples, while the Knoop hardness value was found to improve with a maximum value of 9.8 GPa for the 1 vol.% Al₂O₃ sample. A very high dielectric constant > 60,000 with a low loss tangent (approximately 0.09) was observed for the 0.5 vol.% Al₂O₃ sample at 1 kHz and at room temperature. These data suggest that nanocomposites have a great potential for dielectric applications.     

Synthesis and properties of the composite ceramics from nanocrystalline Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-30% Y<Subscript>0.1</Subscript>Zr<Subscript>0.9</Subscript>O<Subscript>2</Subscript> prepared from a water-alcohol solution

The hydrogel of the mixed oxide Al₂O₃-30% Y_0.1Zr_0.9O₂ was prepared by precipitation of ammonia from a water-alcohol mixture (1 : 5). The Al₂O₃-30% Y_0.1Zr_0.9O₂ compound thus synthesized was characterized using differential scanning calorimetry, transmission electron microscopy, and the BET adsorption method. The obtained sample consisted of spherical particles with an average size of 16–20 nm and a specific surface area of 167 m²/g. The Al₂O₃-30% Y_0.1Zr_0.9O₂ powder was pressed at 300 MPa and then calcinated at 1600°C for 2 h in air. The topographic and structural features of the prepared ceramics were determined using atomic force microscopy and X-ray electron probe microanalysis. The porosity, the Vickers microhardness, and the tensile strength were determined by mercury porometry.     

Performance of Ni catalyst supported on La-hexaaluminate in CO<Subscript>2</Subscript> reforming of CH<Subscript>4</Subscript>

CO₂ reforming of CH₄ was performed using Ni catalyst supported on La-hexaaluminate which has been an well-known material for high-temperature combustion. La-hexaaluminate was synthesized by sol-gel method at various conditions where different amount of Ni (5–20 wt%) was loaded. Ni/La-hexaaluminate experienced 72 h reaction and its catalytic activity was compared with that of Ni/Al₂O₃, Ni/La-hexaaluminate shows higher reforming activity and resistance to coke deposition compared to the Ni/Al₂O₃ model catalyst. Coke deposition increases proportionally to Ni content. Consequently, Ni(5)/La-hexaaluminate(700) is the most efficient catalyst among various Ni/La-hexaaluminate catalysts regarding the cost of Ni in Ni(X)/La-hexaaluminate catalysts. BET surface area, XRD, EA, TGA and TPO were performed for surface characterization. This work was presented at the 6 ^th Korea-China Workshop on Clean Energy Technology held at Busan, Korea, July 4–7, 2006.     

Preparation and application of zeolite beta with super-low SiO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> ratio

This paper presents the direct synthesis of super-low SiO₂/Al₂O₃ ratio zeolite beta molecular sieve through a novel route, by which some of aluminium species are added during crystaling process. The IR results show that with the increase of aluminium content in the framework, the frequency of the band in the range of framework vibration (1060–1090 cm⁻¹) shifts to the lower wave-number; the BET surface-area decreases and the basicity of zeolite becomes stronger. In a second step, new adsorbents were obtained by solid-state ion exchanging zeolite beta with Cu(I), Ag(I) cations. The deep-desulfurization (sulfur levels of <1 ppmw) tests were performed using fixed-bed adsorption technique, the sulfur content of the treated and untreated gasoline was analyzed by microcoulometry. The experimental results show that the desulfurization performance of sorbents decreases in order: Cu(I)beta > Ag(I)beta > Na-beta. The best sorbent, Cu(I)beta, has breakthrough adsorption capacities of 0.236 mmolS/g of sorbent for model gasoline.     

Crystal structure of new compound (Rb,K)<Subscript>2</Subscript>Cu<Subscript>3</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>2</Subscript>

A new compound of (Rb,K)₂Cu₃(P₂O₇)₂ is obtained by high-temperature reactions from a mixture of RbNO₃, KNO₃, Cu(NO₃)₂, and (NH₄)₄P₂O₇. The crystal structure was solved by direct methods and refined to R ₁ = 0.056 for 5022 independent reflections. The compound belongs to a rhombic crystal system, P2₁2₁2₁, Z = 8, a = 9.9410(7) Å, b = 13.4754(6) Å, c = 18.6353 (3) Å, and R = 0.056. The basis of the structure is a complex copper-phosphate skeleton of the composition of [Cu₃(P₂O₇)₂]^2–, which can be regarded as consisting of two types of heteropolyhedral layers parallel to the (001) plane. The layers are alternated with each other, forming a frame, in the cavities of which the positions of alkali cations are located, statistically populated with K⁺ and Rb⁺ ions. Based on the refined populations of the positions of alkali cations, an exact chemical formula of the compound can be written as Rb_1.28K_0.72Cu₃(P₂O₇)₂. The compound is the most complex among those known to this day of the composition of A₂ ^IB₃ ^II(P₂O₇)₂ (A = Li, Na, K, Rb, or Cs; B = Ni, Cu, or Zn).     

Structural evolution of hierarchical porous NiO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites and their application for removal of dyes by adsorption

Hierarchical porous NiO/Al₂O₃ composites were successfully prepared by two-steps. First, the core-shell structured Al₂O₃ microspheres were prepared via a template-free hydrothermal route using KAl(SO₄)₂·12H₂O and Al₂(SO₄)₃·18H₂O as aluminum source. Then, the NiO/Al₂O₃ composites with micro- and nano-hierarchical structures were prepared by a hydrothermal method combining the subsequent calcination process. The obtained characterization result presented that the morphology of hierarchical Al₂O₃ microsphere tuned to irregular platelets by simply varying Ni/Al ratios. The BET analysis showed that the special surface area from 52.12m² g^?1 to 214.8m² g^?1 after two hydrothermal complex process. Effects of Ni/Al ratio, adsorbent dosage, Congo red (CR) concentration, coexisting ions, adsorption time and temperature were investigated. The obtained results indicated that NiO/Al₂O₃ composite had the high adsorption efficiency (99.6%) and great adsorption capacity (186.9mg g^?1) under the optimum conditions. The adsorption isotherm and kinetics data were found to be well fitted and in good agreement with the Langmuir isotherm model and pseudo-second order model, respectively. The hierarchical porous NiO/Al₂O₃ composites presented remarkably higher adsorption efficiency during five recycling, which showed their potential as the highly efficient adsorbent for removal of CR in wastewater.     

A Novel Coordination Polymer with Helical Chain: Synthesis and Crystal Structure of [Cu<Subscript>4</Subscript>(PMEP-Sal)<Subscript>4</Subscript>·H<Subscript>2</Subscript>O]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

Summary A novel coordination polymer, [Cu₄(PMEP-sal)₄·H₂O] _n (PMEP-sal = 4-(2′-hydroxyl benxoylhydrazinyl) ethylidene-5-methyl-2-phenyl-pyrazole-3-one), is synthesized. Single crystal X-ray analysis reveals the polymer contains tetranuclear building blocks in helical arrangement.     

Syndiospecific Polymerization of Styrene Using Half-Titanocene Catalyst Covalently Supported on MgCl<Subscript>2</Subscript>/AlEt<Subscript>n</Subscript>(OEt)<Subscript>3-n</Subscript>

The novel half-titanocene catalyst bearing reactive functional amino group, η⁵-pentamethylcyclopentadienyltri(p-amino-phenoxyl) titanium [Cp^∗Ti(p-OC₆H₄NH₂)₃], was easily synthesized by the reaction of η⁵-pentamethylcyclopentadienyltrichloride titanium (Cp^∗TiCl₃) with p-amino phenol in the presence of triethyl amine (NEt₃). Cp^∗Ti(p-OC₆H₄NH₂)₃ covalently anchored on MgCl₂/AlEt_n(OEt)_3-n support obtained from the reaction of triethylaluminium (AlEt₃) with the adduct of magnesium chloride (MgCl₂) and ethanol (EtOH), has been investigated and used to catalyze syndiospecific polymerization of styrene. Influences of the support structure, cocatalyst, and the molar ratio of Al in methylaluminoxane (MAO) and Ti (Al_MAO/Ti) on catalytic activity, syndiotacticity and molecular weight of the resultant polystyrene were investigated. Compared with the corresponding Cp^∗Ti(p-OC₆H₄NH₂)₃ homogeneous catalyst, a considerable increase in activity and molecular weight of syndiotactic polystyrene (sPS) was observed for the Cp^∗Ti(p-OC₆H₄NH₂)₃-MgCl₂/AlEt_n(OEt)_3-n supported catalyst even at a relatively low Al_MAO/Ti ratio of 50, and the kinetics of polymerization was stable during the reaction process.     

On the role of C<Subscript>2</Subscript>O radicals in the prompt-NO mechanism

The measurements of NO concentrations in the post-flame zone of different hydrocarbon + O₂ + N₂ flames at standard temperature and atmospheric pressure available in the literature are compared with predictions of the original Konnov reaction mechanism and with the same mechanism extended by the reaction of C₂O with N₂. The goal was to investigate the possible role of this reaction proposed by Williams and Fleming [Proc. Combust. Inst., Vol. 31 (2007), pp. 1109–1117]. This new reaction of C₂O with N₂ seems to be a reasonable explanation of the deficiencies in the prompt-NO route. Direct comparisons of the experimental measurements performed in different flames with the modeling strongly suggests that the upper limit of this reaction rate constant is k = 7 · 10¹¹ exp(−17,000/RT) [cm³/(mole · sec)]. __________ Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 5, pp. 3–7, September–October, 2008.