New Aspects of the Impact Reactivity of Nitramines

The impact reactivity (“the first reaction”) of 16 nitramines was determined as the drop energy E_d, required for 50% initiation probability. Relationships have been found between the E_d values, on the one hand, and heats of fusion, ¹⁵N NMR chemical shifts of aza atoms in reaction centers, parameters of low‐temperature thermolysis, and oxygen balances of nitramines studied, on the other. Taking these relationships the E_d values were predicted for four nitramines, from which three have not been synthesized yet. On the basis of the said relationships it was stated that the impact reactivity of nitramine molecules depends on the electronic configuration within their reaction centers and on their conformational stability and intensity of their intermolecular interactions. The reaction centers here are the same as in the case of initiation of the nitramines by shock. It is found that ϵ‐HNIW possesses higher thermal and impact reactivities in comparing with those of β‐modification.     

New Aspects of Impact Reactivity of Polynitro Compounds,Part III. Impact Sensitivity as a Function of the Imtermolecular Interactions

Published data of impact sensitivity of 33 polynitro compounds detected by sound were expressed as the drop energy, E_dr, required for 50 percent initiation probability. A logarithmic relationship has been found between the E_dr values and heats of fusion of the said compounds. The relationship has been found to be in accordance with the idea concerning the role of plastic deformations of crystal played in the initiation of energetic materials by impact and shock. An analogous application of heats of sublimation has not given convincing results.     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

New Aspects of Impact Reactivity of Polynitro Compounds. Part IV. Allocation of Polynitro Compounds on the Basis of their Impact Sensitivities

A linear relationship has been found between the drop energies of impact sensitivity detected by sound and the drop energies of “the first reaction” for 28 polynitro compounds. In the sense of this relationship, the compounds studied fall into three classes. The reason of the said diversification lies in the decomposition reaction rate at the temperature of the beginning of their thermolysis. It is stated that some relationship exists between vibrational excitation by impact, on the one hand, and thermal activation of the molecules of energetic materials, on the other one.     

Relationship Between the Low Temperature Thermolysis and Detonation Temperature of Carbocyclic Nitroaromatic Compounds

In this paper, a new relationship between the activation energies (E_a) of the low temperature thermolysis and detonation temperature for different carbocyclic nitroaromatic compounds is introduced. Two structural parameters are needed to obtain a relatively good correlation for E_a. The resulting R² value of the new correlation is 0.942. The new equation assumes that the calculated detonation temperature can be applied to predict E_a of carbocyclic nitroaromatic compounds with the general formula C_aH_bN_cO_d and any complicated molecular structure. The proposed new method was also used to predict E_a of some technologically attractive high thermostable polynitro arenes with complex molecular structure, e.g., 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐[1,3′,1′,1″] quaterphenyl (DODECA).     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Rhodium‐Catalyzed Enantioselective Intramolecular [4+2] Cycloaddition using a Chiral Phosphine‐Phosphite Ligand: Importance of Microwave‐Assisted Catalyst Conditioning

The use of modular α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol (TADDOL)‐ and 1,1′‐bi‐2‐naphthol (BINOL)‐derived phosphine‐phosphite ligands (L₂*) in the asymmetric rhodium‐catalyzed intramolecular [4+2] cycloaddition (“neutral” Diels–Alder reaction) of (E,E)‐1,6,8‐decatriene derivatives (including a 4‐oxa and a 4‐aza analogue) was investigated. Initial screening of a small ligand library led to the identification of a most promising, TADDOL‐derived ligand bearing a phenyl group adjacent to the phosphite moiety at the arene backbone. In the course of further optimization studies, the formation of a new, more selective catalyst species during the reaction time was observed. By irradiating the pre‐catalyst with microwaves prior to substrate addition high enantioselectivities (up to 93% ee) were achieved. The new cyclization protocol was successfully applied to all three substrates investigated to give the bicyclic products in good yield and selectivity. ³¹P NMR and ESI‐MS measurements indicated the formation of a [Rh(L₂*)₂]⁺ species as the more selective (pre‐) catalyst.     

Diastereo‐ and Enantioselective Synthesis of Chiral Pyrrolidine‐Fused Spirooxindoles via Organocatalytic [3+2] 1,3‐Dipolar Cycloaddition of Azomethine Ylides with Maleimides

In the presence of a Cinchona alkaloid‐based squaramide organocatalyst, the [3+2] cycloaddition of isatin‐derived azomethine ylides with maleimides proceeded readily, thus delivering the desired pyrrolidine‐fused spirooxindoles in 61–89% yields with >20:1 dr and 12 to >99 % ee. The absolute configuration of 5‐chloro‐1,5′‐dimethyl‐3′‐phenyl‐3′,3a′‐dihydro‐2′H‐spiro[indoline‐3,1′‐pyrrolo[3,4‐c]pyrrole]‐2,4′,6′(5′H,6a′H)‐trione was unambiguously determined by means of X‐ray single crystal structure analysis. The reaction mechanism was hypothesized to account for the enantioselective formation of 5‐chloro‐1,5′‐dimethyl‐3′‐phenyl‐3′,3a′‐dihydro‐2′H‐spiro[indoline‐3,1′‐pyrrolo[3,4‐c]pyrrole]‐2,4′,6′(5′H,6a′H)‐trione.

     

Synthesis and spectroelectrochemistry of dithieno(3,2‐b:2′,3′‐d)pyrrole derivatives

New π‐conjugated polymers containing dithieno(3,2‐b:2′,3′‐d)pyrrole (DTP) were successfully synthesized via electropolymerization. The effect of structural differences on the electrochemical and optoelectronic properties of the 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP–aryl–NH₂), 10‐[4H‐dithiyeno(3,2‐b:2′,3′‐d)pirol‐4‐il]dekan‐1‐amine (DTP–alkyl–NH₂), and 1,10‐bis[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl] decane (DTP–alkyl–DTP) were investigated. The corresponding polymers were characterized by cyclic voltammetry, NMR (¹H‐NMR and ¹³C‐NMR), and ultraviolet–visible spectroscopy. Changes in the electronic nature of the functional groups led to variations in the electrochemical properties of the π‐conjugated systems. The electroactive polymer films revealed redox couples and exhibited electrochromic behavior. The replacement of the DTP–alkyl–DTP unit with DTP–aryl–NH₂ and DTP–alkyl–NH₂ resulted in a lower oxidation potential. Both the poly(10‐(4H‐Dithiyeno[3,2‐b:2′,3′‐d]pirol‐4‐il)dekan‐1‐amin) (poly(DTP–alkyl–NH₂)) and poly(1,10‐bis(4H‐dithieno[3,2‐b:2′,3′‐d]pyrrol‐4‐yl) decane) (poly(DTP–alkyl–DTP)) films showed multicolor electrochromism and also fast switching times (<1 s) in the visible and near infrared regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40701.     

Effect of copolymerization on crystallization kinetics of semicrystalline polyimides

Isothermal melt crystallization kinetics and nonisothermal cold crystallization kinetics of co‐PI based on 3, 3′, 4, 4′‐biphenyltetracarboxylic dianhydride (s‐BPDA)/1, 3‐bis‐(4‐aminophenoxy) benzene (TPER)/4, 4′‐oxydianiline(4, 4′‐ODA), and TPER PI (s‐BPDA/TPER) have been investigated. Avrami equation was used to analyze isothermal melt crystallization progress of TPER PI and co‐PI, primary crystallization processes was found to be changed as the introduction of 4, 4′‐ODA. Total activation energy ΔE for TPER PI and co‐PI were found to be ?404 and ?86 kJ mol^?1 by Arrhenius equation. Jeziorny's analysis, Ozawa's analysis, and Mo's approach were used to investigate nonisothermal cold crystallization progress of TPER PI and co‐PI. Activation energy ΔE_non for TPER PI and co‐PI were found to be 247 and 193 kJ mol^?1 by Kissinger equation. The result indicated that co‐PI exhibited lower crystallization rate than TPER PI when isothermally crystallized from melt, but higher crystallization rate under cold nonisothermal crystallization progress. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,Thermal Stability and Impact Stability of Novel Tetranitro‐Dipyridotetraazapentalene Derivatives

The synthetic details for the construction of three new dipyridotetraazapentalene derivatives, 5H‐pyrido[3″,4″:4′,5′] [1,2,3]triazolo‐ [1′,2′:1,2][1,2,3]triazolo[5,4‐b]pyridin‐6‐ium inner salt ( 8 ), 5H‐pyrido[3″,2″:4′,5′] [1,2,3]triazolo[1′,2′:1,2] [1,2,3]triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 15 ) and 5H‐pyrido[2″,3″:4′,5′] [1,2,3]‐triazolo[1′,2′:1,2][1,2,3]triazolo[4,5‐b]pyridin‐6‐ium inner salt ( 16 ) are presented. Nitration of ( 8 ) and ( 15 ) afforded the novel tetranitrodipyridotetraazapentalene derivatives, 2,4,8,10‐tetranitro‐5H‐pyrido[3″,4″:4′,5′][1,2,3]triazolo[1′,2′:1,2][1,2,3]‐triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 3 ) and 2,4,8,10‐tetranitro‐5H‐pyrido[3″,2″:4′,5′][1,2,3]triazolo[1′,2′:1,2][1,2,3]‐triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 4 ) in good yields. Both isomers, ( 3 ) and ( 4 ), exhibited high thermal stability (differential scanning calorimetric analysis and thermal gravimetric analysis) and were insensitive to impact (hammer/anvil test).     

Synthesis,characterization, and properties of low viscosity tetra‐functional epoxy resin N,N,N′,N′‐ tetraglycidyl‐3,3′‐diethyl‐4,4′‐diaminodiphenylmethane

Tetra‐functional epoxy resin N,N,N′,N′‐tetraglycidyl‐3,3′‐diethyl‐4,4′‐diaminodiphenylmethane (TGDEDDM) was synthesized and characterized. The viscosity of TGDEDDM at 25°C was 7.2 Pa·s, much lower than that of N,N,N′,N′‐tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM). DSC analysis revealed that the reactivity of TGDEDDM with curing agent 4,4′‐diamino diphenylsulfone (DDS) was significantly lower than that of TGDDM. Owing to its lower viscosity and reactivity, TGDEDDM/DDS exhibited a much wider processing temperature window compared to TGDDM/DDS. Trifluoroborane ethylamine complex (BF₃‐MEA) was used to promote the curing of TGDEDDM/DDS to achieve a full cure, and the thermal and mechanical properties of the cured TGDEDDM were investigated and compared with those of the cured TGDDM. It transpired that, due to the introduction of ethyl groups, the heat resistance and flexural strength were reduced, while the modulus was enhanced. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40009.     

Cure kinetics and catalyzed effect of hydroxyl group of LC diglycidyl ether of bisphenol‐S with aromatic diamines

The curing reactions of liquid crystalline 4,4′‐bis‐(2,3‐epoxypropyloxy)‐sulfonyl‐bis(1,4‐phenylene) (p‐BEPSBP) with 4,4′‐diaminodiphenylmethane (DDM) and 4,4′‐diaminodiphenylsulfone (DDS) were investigated by nonisothermal differential scanning calorimeter (DSC). The relationships of E_a with the conversion α in the curing process were determined. The catalyzed activation of hydroxyl group for curing reaction of epoxy resins with amine in DSC experiment was discussed. The results show that these curing reactions can be described by the autocatalytic ?esták‐Berggren model. The curing technical temperature and parameters were obtained, and the even reaction orders m, n, and ΔS for p‐BEPSBP/DDM and p‐BEPSBP/DDS are 0.35, 0.92, ?81.94 and 0.13, 1.32, ?24.45, respectively. The hydroxyl group has catalyzed activation for the epoxy–amine curing system in the DSC experiment. The average E_a of p‐BEPSBP/DDM is 67.19 kJ mol^?1 and is 105.55 kJ mol^?1 for the p‐BEPSBP/DDS system, but it is different for the two systems; when benzalcohol as hydroxyl group was added to the curing system, the average E_a of p‐BEPSBP/DDM decreases and increases for p‐BEPSBP/DDS. The crystalline phase had formed in the curing process and was fixed in the system. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Combustion Effects of Nitrofulleropyrrolidine on RDX‐CMDB Propellants

The effect of N‐methyl‐2‐(3‐nitrophenyl)pyrrolidino[3′,4′:1,2]fullerene (mNPF) on the decomposition characteristics of hexogen (RDX) was investigated using differential scanning calorimetry (DSC). The results show that mNPF can accelerate the decomposition of RDX, the peak temperature (T_p) of the exothermal decomposition is reduced by 6.4 K, and the corresponding apparent activation energy (E_a) is decreased by 8.7 kJ mol⁻¹. N‐methyl‐2‐(3‐nitrophenyl)pyrrolidino[3′,4′:1,2]fullerene (mNPF), carbon black (CB), and C₆₀ were used as combustion catalysts to improve the combustion performance of a composite modified double‐base propellant containing RDX (RDX‐CMDB). The burning rate experimental results show that mNPF has a stronger catalytic effect than C₆₀ and CB. The magnitude of the effect of the three carbon substances on the enhancement of the burning rate is as follows: mNPF>C₆₀>CB. The catalytic effects of different contents of mNPF on the burning rates of RDX‐CMDB propellants were also studied, and the results show that the burning rates of RDX‐CMDB propellants are improved with increasing mNPF content. The plateau burning rate of a RDX‐CMDB propellant can be increased to 19.6 mm s⁻¹ when 1.0 % mNPF is added, and the corresponding plateau combustion region occurs at 8–22 MPa.     

Highly Enantioselective Hydrogenation of Quinoline and Pyridine Derivatives with Iridium‐(P‐Phos) Catalyst

The use of a chiral iridium catalyst generated in situ from the (cyclooctadiene)iridium chloride dimer, [Ir(COD)Cl]₂, the P‐Phos ligand [4,4′‐bis(diphenylphosphino)‐2,2′,6,6′‐tetramethoxy‐3,3′‐bipyridine] and iodine (I₂) for the asymmetric hydrogenation of 2,6‐substituted quinolines and trisubstituted pyridines [2‐substituted 7,8‐dihydroquinolin‐5(6H)‐one derivatives] is reported. The catalyst worked efficiently to hydrogenate a series of quinoline derivatives to provide chiral 1,2,3,4‐tetrahydroquinolines in high yields and up to 96% ee. The hydrogenation was carried out at high S/C (substrate to catalyst) ratios of 2000–50000, reaching up to 4000 h⁻¹ TOF (turnover frequency) and up to 43000 TON (turnover number). The catalytic activity is found to be additive‐controlled. At low catalyst loadings, decreasing the amount of additive I₂ was necessary to maintain the good conversion. The same catalyst system could also enantioselectively hydrogenate trisubstituted pyridines, affording the chiral hexahydroquinolinone derivatives in nearly quantitative yields and up to 99% ee. Interestingly, increasing the amount of I₂ favored high reactivity and enantioselectivity in this case. The high efficacy and enantioselectivity enable the present catalyst system of high practical potential.     

Effect of monomer composition on properties of copolyimides derived from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride/4,4′‐oxydianiline/1,3‐bis (4‐aminophenoxy)benzene

A series of uncontrolled molecular weight homopolyimides and copolyimides based on 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (s‐BPDA)/4,4′‐oxydianiline (4,4′‐ODA)/1,3‐bis(4‐aminophenoxy)benzene (TPER) were synthesized. All the polyimides displayed excellent thermal stability and mechanical properties, as evidenced by dynamic thermogravimetric analysis and tensile properties testing. A singular glass transition temperature (T_g) was found for each composite from either differential scanning calorimetry (DSC) or dynamic mechanical analysis (DMA), but the values determined from tan δ of DMA were much different from those determined from DSC and storage modulus (E′) of DMA. The Fox equation was used to estimate the random T_g values. Some composites exhibited re‐crystallization after quenching from the melt; upon heating, multi‐melting behavior was observed after isothermal crystallization at different temperatures. The equilibrium melting temperature was estimated using the Hoffman‐Weeks method. Additionally, DMA was conducted to obtain E′ and tan δ. Optical properties were strongly dependent on the monomer composition as evidenced by UV‐visible spectra. X‐ray diffraction was used to interpret the crystal structure. All the results indicated that composites with TPER composition ≥ 70% were dominated by the TPER/s‐BPDA polyimide phase, and ≤40% by the 4,4′‐ODA/s‐BPDA polyimide phase. When the ratio between the two diamines was close to 1:1, the properties of the copolyimides were very irregular, which means a complicated internal structure. Copyright © 2011 Society of Chemical Industry     

Iridium‐Catalyzed Enantioselective Hydrogenation of Cyclic Imines

A catalytic complex made from [Ir(COD)Cl]₂ [di‐μ‐chloro‐bis(1,5‐cyclooctadiene)diiridium(I)] precursor and (S,S)‐f‐Binaphane ((R,R)‐1,1′‐bis{(R)‐4,5‐dihydro‐3H‐dinaphtho[1,2‐c:2′,1′‐e]phosphepino}ferrocene) ligand effectively catalyzed the enantioselective hydrogenation of cyclic imines with high reactivity and good enantioselectivity.     

Synthesis and characterization of aromatic/cycloaliphatic poly(amide‐ imide‐imide)s from bis(4‐amino‐ 3,5‐dimethylphenyl) cycloalkane derivatives

A series of novel aromatic diamines containing cycloaliphatic moieties was synthesized by the reaction of cycloalkanones like cyclohexanone and cycloheptanone with 2,6‐dimethylaniline. The tetrimide diacid was synthesized using the prepared diamine with 3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride/pyromellitic dianhydride and p‐aminobenzoic acid. The polymers were prepared by treating the tetrimide diacid with different aromatic diamines. The structures of the monomers and polymers were identified using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy. The polymers show excellent solubility. The polymers are amorphous and have high optical transparency. They also show good thermal stability and their T_g value is found to be in the range 268–305 °C. Copyright © 2007 Society of Chemical Industry     

Stille cross‐coupling applied to get higher molecular weight polymers: Synthesis,optoelectronic, Voc properties,and solar cell application

Conjugated polymers are highly desirable for the photovoltaic applications. We report the synthesis, characterization, optoelectronic properties, and solar cell application of two polymers, namely, poly[(9,9‐didodecylfluorene‐2,7‐diyl)‐alt‐(2,2′:5′,2″‐terthiophene‐5,5″‐diyl)] (P1) and poly[(1,4‐bis(dodecyloxy)benzene‐2,5‐diyl)‐alt‐(2,2′:5′,2″‐terthiophene‐5,5″‐diyl)] (P2). The polymers were synthesized via Stille cross‐coupling reaction, and were characterized by the gel permeation chromatography, nuclear magnetic resonance, Fourier transform infrared, UV–vis, thermogravimetric analysis, and cyclic voltammetry analyses. The two copolymers are processable due to their good solubility in organic solvents (tetrahydrofuran, CHCl₃, toluene, chlorobenzene, and o‐dichlorobenzene). The optical band gaps (UV–vis, film, and E_g^opt) of the P1 and P2 are 2.04 and 2.00 eV, respectively. The density functional theory output structures showed that S ^… O space interaction is likely responsible for the higher planarity of P2. The polymers showed low HOMO energy levels (P1: −5.33 eV, P2: −5.05 eV). The E_HOMO for P1 is close to the E_HOMO (−5.4 eV) of an ideal polymer, which is an important, rare, and main origin of the observed higher V_oc (801–808 mV). The onset decomposition temperatures (T_d) for the P1 and P2 are 418°C and 365°C, respectively. The polymer solar cell based on the P1: C₆₀ (1: 1) and P2: C₆₀ (1: 1) blend showed a power conversion efficiency (PCE) of 0.94 and 0.71%, respectively. The composite polymer : PC₆₀BM = 1 : 2 increased PCE of the P1 (1.65%) and P2 (1.09%) under AM 1.5 illumination (100 mW/cm²). The study provided important examples to design donor–donor (D–D) polymers for the photovoltaic applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42147.