Thermal analysis of styrene–alkyl methacrylate polymers. I. Glass transition temperatures

The glass transition temperatures (T_g's) of several polystyrenes and styrene–alkyl methacrylate copolymers and terpolymers were measured using thermomechanical analysis (TMA) and differential scanning calorimetry (DSC). The polymers studied had number-average molecular weights from 3000 to 250,000 g/mole. The results indicate that the composition dependence of the T_g's for the copolymers and terpolymers can be satisfactorily described by a general Fox equation. In general, the measured T_g's of the copolymer and terpolymer samples depend more on the steric effects of the constituent pendent groups than on their molecular weights. The chain flexibility rather than the size of the pendent group is the determining factor in the glass transition properties of the styrene polymers.     

Thermal Stability of Lubricating Oil Additives Based on Styrene and n-Alkyl Methacrylate Terpolymers

In this work the thermal stability of polymeric additives for the improvement of rheological behavior of mineral lubricating oils was investigated. The systems studied comprised methyl methacrylate (MMA)/dodecyl methacrylate (DDMA)/octadecyl methacrylate (ODMA) and styrene (Sty)/DDMA/ODMA terpolymers. The composition of the terpolymers was determined by the ¹H nuclear magnetic resonance spectroscopy and molar mass distribution by the size exclusion chromatography. The thermal degradation of terpolymers was studied by the thermogravimetric analysis. Sty/DDMA/ODMA terpolymers exhibited an improved thermal stability in comparison with MMA/DDMA/ODMA terpolymers of the corresponding compositions. Thus, the temperatures of 50% weight loss were found to be 313°C and 363°C for MMA terpolymer and Sty terpolymer, respectively, where x (MMA) = x (Sty) = 30 mol%.     

Thermal degradation of polymers. II further thermogravimetric and differential thermal analysis studies of atactic poly(m-aminostyrene) homopolymers,copolymers, and related polymers

Thermogravimetric and differential thermal analysis have been employed to study the effect on the thermal degradation pattern in static air of the molecular weight of poly(m-aminostyrene) homopolymers and copolymers with styrene. Related substituted styrene polymers and copolymers with styrene have also been studied in order to assess the effect of introduction of amino, substituted amino, and hydroxy groupings into a polystyrene main chain. The effect of these groupings on the thermal stability of the polymers as compared with polystyrene suggests that the inherent antioxidant characteristics of the subtituent grouping plays the major role in stabilization. A molecular weight effect has been shown to be operative for m-aminostyrene, _p-N,N-dimethylaminostyrene, and m-hydroxystyrene polymers. This manifests itself in terms of different thermograms rather than by significantly influencing the procedural decomposition temperatures, although a trend is seen.     

On the thermal degradation of poly(styrene sulfones). VII. Evaluations of poly(styrene sulfone) thermal stability using invariant kinetic parameters

The thermal degradation behavior of poly(styrene sulfone) was investigated by thermogravimetric analysis (TGA) measurement. This study described its thermal stability by applying the invariant kinetic parameter (IKP) method. The thermogravimetric and differential thermogravimetric analyses of different compositions of poly(styrene sulfones) were carried out over the temperature range 100–500°C under nitrogen. The kinetic parameters (preexponential factor and activation energy) of thermal decomposition of poly(styrene sulfone) can be obtained by dynamic measurement of TGA. The IKP method assumes that the kinetic parameters are independent of the experimental conditions. These parameters are computed without any hypothesis on the form of the kinetic degradation function. Invariant activation energies of the degradation of poly(styrene sulfone) show that the thermal stability decreases as the SO₂ content of poly(styrene sulfone) increases due to the thermal instability of the C? S bond. The relation equation, Ea_inv = 237.0 ? 290.5X_SO2, where X_SO2 is the molecular fraction of SO₂, was obtained to describe the effect of sulfur dioxide on the thermal stability of poly(styrene sulfone). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1698–1705, 2002     

Effect of acrylic acid neutralization on ‘livingness’ of poly[styrene‐ran‐(acrylic acid)] macro‐initiators for nitroxide‐mediated polymerization of styrene

BACKGROUND: The effect of acrylic acid neutralization on the degradation of alkoxyamine initiators for nitroxide‐mediated polymerization (NMP) was studied using styrene/acrylic acid and styrene/sodium acrylate random copolymers (20 mol% initial acrylate feed concentration) as macro‐initiators. The random copolymers were re‐initiated with fresh styrene in 1,4‐dioxane at 110 °C at SG1 mediator/BlocBuilder^® unimolecular initiator ratios of 5 and 10 mol%. RESULTS: The value of k_pK (k_p = propagation rate constant, K = equilibrium constant) was not significantly different for styrene/acrylic acid and styrene/sodium acrylate compositions at 110 °C (k_pK = 2.4 × 10^?6–4.6 × 10^?6 s^?1) and agreed closely with that for styrene homopolymerization at the same conditions (k_pK = 2.7 × 10^?6–3.0 × 10^?6 s^?1). All random copolymers had monomodal, narrow molecular weight distributions (polydispersity index M?_w/M?_n = 1.10–1.22) with similar number‐average molecular weights M?_n = 19.3–22.1 kg mol^?1. Re‐initiation of styrene/acrylic acid random copolymers with styrene resulted in block copolymers with broader molecular weight distributions (M?_w/M?_n = 1.37–2.04) compared to chains re‐initiated by styrene/sodium acrylate random copolymers (M?_w/M?_n = 1.33). CONCLUSIONS: Acrylic acid degradation of the alkoxyamines was prevented by neutralization of acrylic acid and allowed more SG1‐terminated chains to re‐initiate the polymerization of a second styrenic block by NMP. Copyright © 2008 Society of Chemical Industry     

Degraded products in weathered polymers

Styrene–methyl vinyl ketone copolymers, methyl methacrylate–methyl vinyl ketone copolymers, and styrene–methyl vinyl ketone–2,6-di-t-butyl-4-acroylaminomethylphenol terpolymers as well as polystyrene and polypropylene have been weathered either by artificial irradiation or by outdoor exposure. The weathered products were analyzed using GC mass spectrometry, liquid chromatography, IR, UV, NMR, and wet analytical methods. Most of the weathered products proved to be low molecular weight polymers with various functional groups, and many low molecular weight compounds were identified. From the degradates of styrene copolymers, acetone, acetic acid, acetophenone, benzoic acid, formic acid, phenol, benzaldehyde, etc., were identified; from the degradates of methyl methacrylate copolymers, acetone, acetic acid, methanol, methyl methacrylate, methyl vinyl ketone, etc., were identified; and from the degradates of polypropylene, aliphatic acids up to propionic were analyzed. In many cases, the most abundant species was acetic acid. From polypropylene weathered outdoors for two years, 1.2 μl/g acetic acid was obtained. The degradates of styrene copolymers were found to contain fluorescent substances.     

Structure–property relationship in copolymers of methacrylic acid esters. I. Thermal behavior

This article describes the synthesis and thermal characterization of copolymers of methyl methacrylate (MMA) and alkyl methacrylates. The copolymerization was carried out using different mol fractions (0.05–0.25) of alkyl methacrylates, i.e., octyl methacrylate (OMA)/decyl methacrylate (DMA)/lauryl methacrylate (LMA)/stearyl methacrylate (SMA), in the initial feed at 80°C. The copolymer composition was determined from ¹H-NMR. The thermal stability of the copolymers was investigated by thermogravimetric analysis and pyrolysis gas chromatography. A two/three-step degradation was observed in the copolymer samples. The monomers were the major product of degradation in most of the copolymers except in SMA/MMA copolymers where the product of side-group elimination was also observed. An attempt was also made to determine the yield of the monomers during degradation and then to evaluate the copolymer composition. © 1994 John Wiley & Sons, Inc.     

Star‐shaped POSS–methacrylate copolymers with phenyl–triazole as terminal groups,synthesis, and the pyrolysis analysis

Star‐shaped polyhedral oligomeric silsesquioxane (POSS)–methacrylate hybrid copolymers with phenyl–triazole as terminal groups had been designed and synthesized via sequential atom transfer radical polymerization (ATRP), azidation, and phenylacetylene‐terminated procedures, and the hybrid copolymers here could be denoted as POSS–(PXMA‐Pytl)₈, where X can be M, B, L, and S, represented four different methacrylate monomers, such as methacrylate (MMA), butyl methacrylate (BMA), lauryl methacrylate (LMA), and stearyl methacrylate (SMA), respectively. Thermal gravimetric analysis (TGA) and in situ Fourier transform infrared spectroscopy (FTIR) were applied for studying the thermal stability and degradation mechanism, and it was found that all of the POSS–(PXMA‐Cl)₈ and POSS–(PXMA‐Pytl)₈ copolymers exhibited excellent thermal stabilities, which had great potential in heat‐resistant material application. Different tendencies of decomposition temperatures at 5% and 10% weight loss (T₅ and T₁₀) dependent on the side‐chain length and terminal group species were investigated respectively. The longer alkyl side chains of the monomers, the lower thermal stabilities, and enhanced T₅ and T₁₀ were also shown with the introduction of phenyl–triazole groups instead of chlorine groups. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40652.     

Synthesis,characterization and thermal degradation of dual temperature‐ and pH‐sensitive RAFT‐made copolymers of N,N‐(dimethylamino)ethyl methacrylate and methyl methacrylate

Poly{[(N,N‐(dimethylamino)ethyl methacrylate]‐co‐(methyl methacrylate)} copolymers of various compositions were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization at 70 °C in N,N‐dimethylformamide. The polymer molecular weights and molecular weight distributions were obtained from size exclusion chromatography, and they indicated the controlled nature of the RAFT polymerizations; the polydispersity indices are in the range 1.1–1.3. The reactivity ratios of N,N‐(dimethylamino)ethyl methacrylate (DMAEMA) and methyl methacrylate (MMA) (r_DMAEMA = 0.925 and r_MMA = 0.854) were computed by the extended Kelen–Tüdös method at high conversions, using compositions obtained from ¹H NMR. The pH‐ and temperature‐sensitive behaviour were studied in aqueous solution to confirm dual responsiveness of these copolymers. The thermal properties of the copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The kinetics of thermal degradation were determined by Friedmann and Chang techniques to evaluate various parameters such as the activation energy, the order and the frequency factor. © 2012 Society of Chemical Industry     

Thermal degradation of polymers. X. Thermal analysis studies on poly(p-N,N-dimethylaminostyrene) homopolymers and copolymers with styrene in nitrogen

Studies have been made on the effect of the molecular weight of p-N,N-dimethylaminostyrene homopolymers and the composition of its copolymers with styrene on the glass transition temperature. Comparative thermal degradation studies have been made on polystyrene and p-N,N-dimethylaminostyrene polymers by thermal analytical methods (TG, DTA, and DSC). The differences in thermal stability and overall thermal degradation behavior of the two systems are discussed in terms of the differences in their degradation mechanisms.     

Electron beam lithographic evaluation and chain scissioning yields of itaconate resists

Copolymers of itaconic acid with methyl methacrylate, P(ItA–MMA), have been synthesized as promising positive working electron beam resists.^1,2 However, attempts to obtain greater electron beam sensitivity by increasing the itaconic acid content and initial molecular weight of these copolymers have been hindered by difficulties in synthesizing itaconic acid copolymers with an ItA content greater than 50 mol% or with a molecular weight above 250,000. The usefulness of the MMA–ItA copolymers is also limited by their susceptibility to anhydride formation which makes this resist very sensitive to prebake conditions and aging times. To overcome these limitations and to develop resist materials with improved sensitivity, alkyl ester derivatives of itaconic acid have been synthesized, both as homopolymers and as copolymers with methyl methacrylate. The electron-beam chain scissioning yields, G(s), of these derivatives have been determined, and the most promising of these copolymers and homopolymers have been evaluated for lithographic performance. The G(s) values of the alkyl itaconate copolymers depend greatly on the structure of the alkyl group. The mono-alkyl itaconate copolymers exhibit G(s) values 2–3 times greater than the corresponding dialkyl itaconate copolymers. In particular, copolymers of monomethyl itaconate (MeI) with methyl methacrylate are found to be promising resist materials with high sensitivities and compatability with processing conditions. A trend in sensitivity is observed for a series of MMA–MeI copolymers ranging from 20 to 85 mol % MeI, with a maximum sensitivity observed for the 57 and 73% MeI compositions. These copolymers exhibit improved sensitivity over that of the itaconic acid copolymers. Anhydride is formed less readily from the MeI copolymers than from the ItA copolymers, improving the stability of the resist for process conditions. Areas exposed in P(MMA–73 mol % MeI) at 4 μC/cm² (20 kV) were developed with less than 10% thinning of unexposed resist and with a contrast (γ) of 2. Vertical walls were observed for 1 μm wide lines using P(MMA μ73% MeI) at a dose of about 6 μC/cm².     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Study on the relationship between the structure and activities of alkyl methacrylate–maleic anhydride polymers as cold flow improvers in diesel fuels

In order to find efficient cold flow improvers for diesel fuels derived from crude oil, copolymers (R¹MC–MA) were prepared making use of the copolymerization of methacrylate (R¹MC) of various alkyls with maleic anhydride (MA), and terpolymers (R¹MC–MA–R²MC) were prepared by the reaction of long-chain alkyl methacrylate (R¹MC), maleic anhydride (MA), and short alkyl methacrylate (R²MC). The additives were purified and characterized by IR, ¹H–NMR, and GPC. The activities of the synthetic products as the cold flow improvers in two diesel fuels were investigated. The results indicate that: (1) the alkyl chain length of R¹ in R¹MC–MA copolymers significantly affects the solid point depressing performance. When the long-chain alkyl R¹ is n–C₁₄H₂₉– and the reaction material molar ratio (R¹MC/MA) is 1:2, the C₁₄MC–2MA possesses the best ΔSP property; (2) the (C₁₄MC–MA–R²MC) terpolymers all demonstrate excellent solid point depression properties when the short-chain alkyl R² varies from CH₃– to n–C₈H₁₇–; (3) however, all of the tested copolymers and terpolymers do not demonstrate necessary cold filter plugging point depression performance.     

Thermal behavior of poly(dimethyl itaconate) and poly(di‐n‐butyl itaconate) copolymerized with methyl methacrylate

The thermal degradation behavior of random copolymers of dimethyl itaconate and di‐n‐butyl itaconate with methyl methacrylate was studied. The thennal stability of copolymers depends on the structure of the di‐n‐alkyl itaconate comonomer, and on the copolymer composition. The relative thermal stability increases with the methyl methacrylate copolymer molar fraction, following a trend similar to the glass transition temperature variation. The activation energy was obtained by using MacCallum and Tanner's approach. In addition, the thermal degradation of homopolymers was evaluated in inert atmosphere as well as in thermo‐oxidative conditions, presenting different behaviors.     

Study on the synthesis of heat‐resistant PMMA

N‐cyclohexylmaleimide (CHMI) and styrene (St) were used to copolymerize with methyl methacrylate (MMA) to synthesize heat‐resistant poly(methyl methacrylate) (PMMA) by a solution copolymerization method and a suspension copolymerization method. Residual CHMI concentrations in the copolymers were analyzed by gas chromatography. Effects of styrene on residual CHMI concentration, glass transition temperature (T_g), molecular weight, and molecular weight distribution were studied. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1335–1339, 1999     

Accelerant‐promoted free radical polymerization of methacrylates by stabilized nitroxide unimolecular initiators: synthesis and characterization

BACKGROUND: This investigation evaluates the effectiveness of initiator adducts for living and controlled polymerization of methacrylates, crosslinking of dimethacrylates and thermal stabilities of the resulting polymers. Adducts of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy with benzoyl peroxide and with azobisisobutyronitrile were prepared and evaluated as stabilized unimolecular initiators for the free radical polymerization of methacrylate monomers using sulfuric acid as catalyst. The monomers used were methyl methacrylate, triethylene glycol dimethacrylate (TEGDMA) and ethoxylated bisphenol A dimethacrylate (EBPADMA). RESULTS: Successful polymerization was achieved at 70 and 130 °C with reaction times ranging from 45 min to 120 h. The dispersity (D) of poly(methyl methacrylate) (PMMA) was 1.09–1.28. The livingness and extent of control over polymerization were confirmed with plots of M_n evolution as a function of monomer conversion and of the first‐order kinetics. The glass transition temperature (T_g) for PMMA was 123–128 °C. The degradation temperature (T_d) for PMMA was 350–410 °C. T_d for poly(TEGMA) was 250–310 °C and for poly(EBPADMA) was 320–390 °C. CONCLUSION: The initiators are suitable for free radical living and controlled polymerization of methacrylates and dimethacrylates under mild thermal and acid‐catalyzed conditions, yielding medium to high molecular weight polymers with low dispersity, high crosslinking and good thermal stability. Copyright © 2008 Society of Chemical Industry     

Effect of organomodified clay on the reaction kinetics,properties and thermal degradation of nanocomposites based on poly(styrene‐co‐ethyl methacrylate)

In this research, synthesis of novel nanocomposites based on a poly(styrene‐co‐ethyl methacrylate) copolymer matrix was investigated with different types and amounts of organomodified montmorillonite (MMT) clays. The in situ polymerization technique was selected with dispersion of the MMT nanoparticles into the comonomer mixture and subsequent bulk radical polymerization. Reaction kinetics was measured gravimetrically and it was found that the existence of rigid phenyl rings in the organomodifier may result in a hindered reaction rate especially at high clay loadings. Structural characteristics of the nanocomposites formed were verified with XRD and Fourier transform infrared analysis and mainly intercalated/partially exfoliated structures were verified; their glass transition temperature was measured with DSC, and their molecular weight distribution and average molecular weights were measured with gel permeation chromatography. The latter was also used to measure the variation of the copolymer average molecular weight with conversion. Slightly higher average molecular weight and T_g values for the copolymer in the nanocomposites were measured, compared with neat copolymer. The thermal stability of the nanocomposites was measured with TGA and found to be significantly improved. One‐step degradation revealed the existence of macromolecular chains without defective structures. Finally, pyrolysis of the nanocomposite copolymers resulted in the production of both comonomers in high amounts, followed by some dimers or trimers. © 2013 Society of Chemical Industry     

Synthesis and characterization of PBMA‐b‐PSt‐b‐PBMA triblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate)‐b‐polystyrene‐b‐poly(n‐butyl methacrylate) (PBMA‐b‐PSt‐b‐PBMA) triblock copolymers were successfully synthesized by emulsion atom transfer radical polymerization (ATRP). Difunctional polystyrene (PSt) macroinitiators that contained alkyl chloride end‐groups were prepared by ATRP of styrene (St) with CCl₄ as initiator and were used to initiate the ATRP of butyl methacrylate (BMA). The latter procedure was carried out at 85°C with CuCl/4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as catalyst and polyoxyethylene (23) lauryl ether (Brij35) as surfactant. Using this technique, triblock copolymers consisting of a PSt center block and PBMA terminal blocks were synthesized. The polymerization was nearly controlled, ATRP of St from those macroinitiators showed linear increases in the number average molecular weight (Mn) with conversion. The block copolymers were characterized with infrared (IR) spectroscopy, hydrogen‐1 nuclear magnetic resonance (¹HNMR), and differential scanning calorimetry (DSC). The effects of the molecular weight of macroinitiators, concentration of macroinitiator, catalyst, emulsion, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were also reported. POLYM. ENG. SCI., 45:1508–1514, 2005. © 2005 Society of Plastics Engineers     

Thermal analysis and characterization of 2-allylphenoxyorganocyclotriphosphazene copolymers

The radical copolymerizations of I (2-allylphenoxyorganocyclotriphosphazene) with chloride, phenoxy, 2,2,2-trifluoroethoxy side group reacting with II (styrene, methyl methacrylate and vinylbenzyl chloride) using AIBN, n-BuLi and ultraviolet as initiator were investigated. The type of the copolymerization, reaction time, temperature were evaluated to obtain the optimum reaction condition. The incorporation of organophosphazene units into an organic polymer backbone decreased the glass transition temperature and increased the thermal stability of the copolymers. The weight conversion and the molecular weight had a maximum value at reaction temperature of around 70 °C. The order for both weight conversion of the copolymerization and the thermal stability of phosphazene polymer with the co-monomer was VBC > STY > MMA, and with the side group Cl-> C₆H₅O-> CF₃CH₂O-. The phosphazene copolymer is of conductivity and crystallization.     

Tetraphenylethane iniferters: Polyurethane-polystyrene multiblock copolymers through “living” radical polymerization

Toluene diisocyanate-based polyurethane iniferters containing tetraphenyl-ethane groups in between polyurethane blocks were prepared by the reaction of isocyanate-terminated prepolymers and 1,1,2,2-tetraphenyl-1,2-ethanediol. When these iniferters were decomposed in the presence of styrene, polyurethane-polystyrene multiblock copolymers were obtained through a “living” radical mechanism. The effect of changing polyol on the T_g, thermal stability, and molecular weight of polyurethane iniferters as well as block copolymers was studied. The molecular weight of the block copolymers increased with increasing both polymerization time and conversion. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1551–1560, 1997