Noninvasive pulse modulator concept for nonradiative dielectric(NRD) waveguide

The nonradiative dielectric (NRD) waveguide has been identified as a promising candidate for use at millimetre-wave frequencies. To realise this promise NRD waveguide must support the design of the necessary active and passive components for the realisation of systems and subsystems. The authors describe the principle of a novel modulator for use with NRD waveguide and present preliminary results     

Comparative modal analysis of NRD parallelepiped dielectric resonators

The resonance modes of dielectric resonators having parallelepiped shape are extensively investigated in this work referring to the nonradiative dielectric (NRD) topology. Different numerical techniques, both rigorous and approximated (boundary elements, point matching, finite elements, transmission line approaches), are proposed and implemented to compute the relevant resonance spectrum as a function of the involved geometric and electromagnetic parameters. The theoretical results are discussed and compared also in connection with experimental investigations, carried out on suitable prototypes of NRD components. Qualitative and quantitative information is thus achieved to characterize with accuracy and efficiency the basic parameters (resonant frequencies, field configurations, etc.) involved in filter design and in other applications at microwaves and millimeter waves.     

Efficient photodiode-waveguide coupling for hybrid integrated optical circuits

A GalnAsP edge-detecting photodiode was coupled with an SiO2-TiO2 single-mode waveguide in a simple hybrid integration scheme. The newly developed edge-detecting photodiode with a window region was used to improve photodiode durability.     

Substrate integrated nonradiative dielectric waveguide

A new substrate integrated circuits (SICs) fabrication technique is proposed for realizing nonradiative dielectric (NRD) waveguide circuits. This new technique called substrate integrated NRD (SINRD) guide allows the NRD guide be integrated within a dielectric substrate by drilling a pattern of air holes. Dispersion analysis and design considerations of the new structure are discussed. A hybrid integrated scheme of planar and SINRD circuits is demonstrated for the first time with simulation and measurement results.     

Full-wave nonlinear analysis of nonradiative dielectric guide circuits including lumped elements

This paper describes the full-wave numerical analysis of complex nonradiative dielectric (NRD) guide structures including linear or nonlinear lumped elements. The numerical results described in this paper, validated through experimentation, show that the method is suitable for NRD guide and similar circuits. Nonlinear analysis of a single-ended NRD guide mixer is carried out, and the results are experimentally verified. Nonlinear harmonic-balance analysis of a novel leaky-wave balanced mixer circuit with very good tolerance of manufacturing inaccuracies in NRD guide configuration in Ka-band is then carried out. Due to curved segments, and orders of magnitude difference in the dimensions of different parts, the analysis of this component requires certain simplifying assumptions. How these can be implemented without sacrificing much accuracy is described. Until now, the design of NRD guide components, especially those using nonlinear effects, has been mostly trial-and-error-based. Here we demonstrate that a more systematic approach is possible.     

Coupling and quality factors in parallelepiped nonradiative dielectric resonators

In this work, the quality factors and the coupling effects have been investigated for parallelepiped dielectric resonators in nonradiative dielectric (NRD) waveguide, in order to achieve fundamental information for the design of various types of advanced filters. The unloaded quality factor has been calculated taking into account both conductor and dielectric losses through a straightforward version of the perturbation method. The electromagnetic coupling as a function of the distance between NRD guide and resonators has been evaluated through proper extensions of typical lumped equivalent circuits, thus quantifying resonance frequency shifts, external and loaded quality factors, etc.. To validate the derived theoretical models, suitable measurements of all these parameters have been performed at microwaves on X-band NRD prototypes.     

集成化故障检测电路设计

讨论了高频 (微波 )通讯系统中故障检测电路设计的一般方法及设计中应注意的问题 ,并给出了一个设计实例     

Ceramic capacitors for hybrid integrated circuits

Ruggedness, wide capacitance range, high volumetric efficiency, and relatively attractive cost have been the main reasons for the popularity of ceramic chip capacitors. Continuing improvements in most of these categories promise to keep the ceramic chip in its present position of prominence. This article considers multilayer, single-layer, and screened-on configurations. In addition, relationships between size, capacitance, and cost are covered for three common ceramic formulations (NPO, W5R, and Z5U).     

A generalized surface-volume integral-equation (SVIE) approach for analysis of hybrid planar/NRD-guide integrated circuits

A generalized surface-volume integral-equation approach (SVIE) has been proposed and developed for accurate modeling and analysis of hybrid planar/nonradiating dielectric (NRD)-guide integrated circuits. On the basis of vertical modes in basis functions for NRD-guide circuits, vertical integration in space-domain is carried out analytically and a set of first-order Green's functions is constructed. Then, the solution of the volume integral-equation concerning with the NRD-guide circuits has been reduced to a two-dimensional planar problem in connection with each vertical mode. In this way, only the diagonal submatrices need to be calculated due to the orthogonal property of different vertical modes. A reduced calculation region technique is used for handling higher order vertical modes in which the fields are confined in the slot areas and their vicinities. The method was applied to a class of different hybrid structures. The results are in good agreement with measured results or the results obtained with other methods.     

Efficient finite-element-based time-domain beam propagation analysis of optical integrated circuits

In this paper, a novel numerically efficient time-domain beam propagation method based on the versatile finite element method (FETDBPM) is presented for the analysis of arbitrarily shaped optical integrated circuits. Lumping the global mass matrix into a diagonal matrix, an explicit full band finite-element time-domain propagation algorithm that needs only matrix-vector multiplication at each time step is derived. The accuracy and efficiency of the proposed FETDBPM is demonstrated through the analysis of propagation in different photonic integrated structures.     

High-Q micro-ring resonators and grating couplers for silicon-on-insulator integrated photonic circuits

An ultra-small integrated photonic circuit has been proposed,which incorporates a high-quality-factor passive micro-ring resonator(MR) linked to a vertical grating coupler on a standard silicon-on-insulator(SOI) substrate.The experimental results demonstrate that the MR propagation loss is 0.532 dB/cm with a 10μm radius ring resonator,the intrinsic quality factor is as high as 202.000,the waveguide grating wavelength response curve is a 1 dB bandwidth of 40 nm at 1540 nm telecommunication wavelengths,and the measured fiber-to-fiber coupling loss is 10 dB.Furthermore,the resonator wavelength temperature dependence of the 450 nm wide micro-ring resonator is 54.1 pm/℃.Such vertical grating coupler and low loss MR-integrated components greatly promote a key element in biosensors and high-speed interconnect communication applications.     

Thick-film fabrication techniques for millimetre-wave dielectric waveguide integrated circuits

The letter presents the results of an initial study performed in the development of millimetre-wave dielectric waveguide integrated circuits using novel thick-film printing techniques. The measurements of the propagation characteristics of sample lines at 60 GHz demonstrate the feasibility of such an approach and examples of printed components indicate its potential in low-cost high-volume applications.     

Quasiplanar 3 dB hybrid for millimetre-wave integrated circuits

A quasiplanar 3 dB hybrid suitable for integration in millimetre-wave fin-line circuits is presented. The performance of the device is characterised by 0.5 dB insertion loss, less than 0.5 dB imbalance and 20?25 dB isolation over the entire Ka-band (26.5?40 GHz).     

Complete characterization of transmission losses in generalizednonradiative dielectric (NRD) waveguide

In this paper, transmission losses of the generalized nonradiative dielectric (NRD) waveguide are modeled and presented by our closed-form equations for the design of hybrid and monolithic millimeter-wave integrated circuits. This generalized structure includes our recently proposed channelized NRD-guide. Parametric effects are studied with respect to complex propagation constant and characteristic impedance, and some useful guidelines are generated for practical design considerations. Calculated results are discussed separately for the conductor and dielectric losses for the two fundamental longitudinal section electric (LSE) and longitudinal section magnetic (LSM) modes. It is found that the LSE mode may have losses, in some cases, comparable or even smaller than those of its LSM counterpart, contradicting what has usually been perceived for the conventional NRD-guide design     

Supply-current analysis (scan) as a screen for bipolar integrated circuits

A novel technique utilising the analysis of supply-current variations is proposed as a screen for digital integrated circuits. The application of the method to a simple m.s.i. circuit is used to demonstrate its capability of indicating the presence of flaws at internal circuit nodes.     

Shielded rectangular dielectric wave guides for millimeter wave integrated circuits

The dispersion characteristics of Insulated non-radiative dielectric guides are computed using mode matching technique. From the dispersion characteristics the dielectric loss conductor loss and wave impedances are derived. Effect of metallic walls on trapped insulated image guide are also discussed. The dimensions of Insulated non radiative dielectric guide are same as that of rectangular metallic wave guide at ka band.     

Interconnection systems for solid-state components in hybrid integrated circuits

The factors which can influence the performance and reliability of the interconnection system for solid-state components in hybrid integrated circuits are examined. The main emphasis is on materials that have received most attention in the tantalum film and silicon technologies in the Bell System. However, other materials that are being used are discussed. The interrelation of various factors in choosing an interconnection system is discussed. These factors include the composition of the materials, the methods of depositing various metals, and the properties of the substrates. Among the properties of the materials that are considered, emphasis is laid on environmental stability. The results of environmental tests on conductors and thin-film resistors under high-humidity conditions are reported. Some results on the use of silicone rubber as an encapsulant indicate this material is effective in reducing degradative action on hybrid circuits.     

n-p-n silicon lateral phototransistors for hybrid integrated optical circuits

An etched mesa silicon lateral phototransistor (EMS-LPT) suitable for detecting the light signal from optical channel waveguides has been designed and fabricated. In this paper both n⁺-p-n⁺uniform base and n⁺-p-p^--n⁺double-diffused EMS-LPT's are reported. The photoactive region of the EMS-LPT is highly localized and can be easily coupled either via an evanescent field or to a grating coupler on a channel waveguide. Light coupling, gain, speed, and signal-to-noise ratio of the device are thereby greatly improved. The fabrication techniques of the EMS-LPT's are compatible with those of MOSFET's, permitting integration of multiple EMS-LPT's and MOSFET load transistors to form optically addressed inverters on the same silicon chip. By flip-chip bonding LiNbO3and silicon substrates and coupling LiNbO3channel waveguides to EMS-LPT's via grating couplers, we produce electrooptic switches with optical input and output.     

Resonant frequency analysis of dielectric ring resonators

The mode-matching technique is applied to guided and continuous spectra to derive the resonant frequencies of the high-order azimuthal modes of dielectric ring resonators. The numerical results of this field theory analysis are in close agreement with the measurements in the X-band     

Integrated travelling-wave antenna for nonradiative dielectric waveguide

A travelling-wave antenna for integrated use in nonradiative dielectric waveguide is described. The antenna is constructed by cutting a longitudinal slot in the waveguide side wall. Results are presented showing the comparison between measured and calculated data.