Structural, magnetic and electrical transport properties for a series of La1−xSrxFe1−xMnxO3 (0.3 ≤ x ≤ 0.7) compounds

The structural, electrical transport and magnetic properties have been studied for compounds: La_1−xSr_xFe_1−xMn_xO₃ (0.3 ≤ x ≤ 0.7). The lattice parameter, a, first decreases with x, and followed by an increase when Sr²⁺ and Mn⁴⁺ was continuously doped. The cell parameters, b and c, slightly decrease with coupled substitution of Sr²⁺ for La³⁺ and Mn⁴⁺ for Fe³⁺. In the paramagnetic temperature range, formation of magnetic clusters is suggested; the sizes of clusters decrease with x up to 0.5, following that they increase sharply with continuing doping. The electrical behaviors of all specimens demonstrate insulators and the electrical resistivity increases with content of Mn⁴⁺ and Sr²⁺ ions doped. A variable range hopping model is suitable to describe electrical transport process for the compounds at low temperature. At high temperature the electrical transport process can be described by bipolaron model for all compounds.     

Coexistence of localized magnetism and itinerant ferromagnetism in a Gd5Y2Pd3 single crystal

Experimental results of the single-crystal X-ray diffraction, XPS, ac-magnetic susceptibility (ac-χ), dc-magnetization M(T), and electrical resistivity (ρ) measurements for the hexagonal Th₇Fe₃-type Gd₅Y₂Pd₃ single crystal are presented. Anomalies in (ac-χ), (T) and M(T)-curves have allowed to establish that Gd₅Y₂Pd₃ undergoes a long-range ferromagnetic-type ordering at T_C = 263 K, followed by a spin-reorientation below 190 K. The magnetization data indicate that there is an excess of the magnetic moment for the Gd³⁺ ions. The observed XPS, magnetic and electrical resistivity behaviour points to the coexistence of localized magnetism from the magnetic Gd³⁺ ions and itinerant ferromagnetism from 4d- and 5d-electron bands. We discuss the magnetic behaviour of the Gd_7−xY_xPd₃ solid solutions in terms of three competitive mechanisms: RKKY-interaction, magnetic frustration and spin-fluctuation.     

A neutron diffraction study of the hexagonal pseudo-ternary compounds ErMn6−xFexSn6 (x = 0.2, 0.4, 0.6, 0.8, 1.0, 2.0, 3.0, 4.0)

The hexagonal ErMn_6−xFe_xSn₆ solid solution (0.2 < x < 4) has been studied by magnetisation measurements and neutron diffraction. The ordering temperature of the T = (Mn,Fe) sublattice almost continuously increases from T = 386 K for x = 0.2 to T = 498 K for x = 4. The T sublattice orders in the successive magnetic structures helimagnetic H1, antiferromagnetic AF2, helimagnetic H2 and antiferromagnetic AF1 with increasing iron content. While structures AF2 and H1 were already observed in ternary Mn compounds and AF1 in ternary iron compounds, the structure H2 is of a new kind characterized by an AF slab around the Er(1a) site. At low temperature, a change of the easy direction of the Er moment from easy plane to easy axis is observed. The iron-rich compounds display a ferromagnetic order of the Er sublattice. A new kind of magnetic structure characterized by a sine-wave modulated arrangement with a propagating vector Q = (0, 0, q_z) is also observed. The evolution of the magnetic properties (enhancement of the AF character of the (Mn,Fe) sublattice and magnetocrystalline anisotropy of erbium) is discussed.     

On Synthesis and Magnetic Properties of Nd(Fe, Mo, Ti)12Zx (Z=N, H)

NdFe_10+xMo_2−2xTi_x compounds with 0≤x≤1.0 have been prepared by using the reduction–diffusion process with superfine precursors as starting materials. With increasing Ti-content, the intrinsic magnetic properties, such as the Curie temperature, saturation magnetization and magnetocrystalline field, are improved. The interstitial compounds NdFe_10+xMo_2−2xTi_xZ_y (Z=N, H) were obtained and exhibit significant enhancement of the intrinsic magnetic properties upon nitrogenation.     

Thermoelectric properties of novel skutterudites with didymium: DDy(Fe1−xCox)4Sb12 and DDy(Fe1−xNix)4Sb12

In order to improve the thermoelectric properties via efficient phonon scattering Didymium (DD), a mixture of Pr and Nd, was used as a new filler in ternary skutterudites (Fe_1−xCo_x)₄Sb₁₂ and (Fe_1−xNi_x)₄Sb₁₂. DD-filling levels have been determined from combined data of X-ray powder diffraction and electron microprobe analyses (EMPA). Thermoelectric properties have been characterized by measurements of electrical resistivity, thermopower and thermal conductivity in the temperature range from 4.3 to 800 K. The effect of nanostructuring in DD_0.4Fe₂Co₂Sb₁₂ was elucidated from a comparison of both micro-powder (ground in a WC-mortar, 10 μm) and nano-powder (ball-milled, 150 nm), both hot pressed under identical conditions. The figure of merit ZT depends on the Fe/Co and Ni/Co-contents, respectively, reaching ZT > 1. At low temperatures the nanostructured material exhibits a higher thermoelectric figure of merit. The Vickers hardness was measured for all samples being higher for the nanostructured material.     

Study of the electrical conduction behaviour of the Ba1−xLaxTi1−xNixO3 (x 0.10) system

The electrical conduction behaviour of the Ba_1−xLa_xTi_1−xNi_xO₃ (x 0.10) system has been studied by complex plane impedance analysis and measurements of a.c. conductivity in the temperature range 400–575 K. The values of the bulk resistance for these samples are obtained from a circular arc passing through the origin in their impedance plots. A.c. conductivity obeys the relation σ_a.c.αω⁸ in the temperature range of measurements. These results indicate that conduction occurs in this system because of hopping of charge carriers between localized nickel sites.     

Magnetic properties of Ce3−xGdxCo11B4 borides

The structure and magnetic properties of Ce_3−xGd_xCo₁₁B₄ borides have been studied by X-ray powder diffraction (XRPD), magnetization and differential scanning calorimetry (DSC) measurements. X-ray analysis reveals that the compounds crystallize in the hexagonal Ce₃Co₁₁B₄-type structure with P6/mmm space group. The substitution of Gd for Ce leads to an increase of the unit-cell parameter a and the unit-cell volume V, while the unit-cell parameter c decreases linearly. Magnetic measurements indicate that all samples are ordered magnetically below the Curie temperature. The Curie temperatures increase as Ce is substituted by Gd. The saturation magnetization at 4 K decreases upon the Gd substitution up to x = 1, and then increases.     

Oxidation behavior of NixFe1−x(OH)2 in Cl-containing solution

The addition of Ni leads to the formation of protective rust layer on steel and subsequently high corrosion resistance of steel in Cl⁻-containing environment. α-FeOOH, β-FeOOH, γ-FeOOH and Fe₃O₄ are formed mainly on steels exposed to Cl⁻-containing atmosphere. It is expected that systematic investigation of the effect of Ni(II) on the formation process of each oxide in solution should lead to elucidation of the role of Ni in the formation of anticorrosive oxide layer. This study reports the oxidation behavior of Ni_xFe_1−x(OH)₂ in Cl⁻-containing solution at two different pH regions (condition I under which solution pH is allowed to decrease and condition II under which solution pH is maintained at 8) where γ-FeOOH and Fe₃O₄ are predominantly formed, respectively, upon the oxidation of Fe(OH)₂. In the presence of Ni(II) in the starting solution, the formation of Ni(II) doped β-FeOOH with very low crystalline was facilitated and the formation of γ-FeOOH was suppressed with increasing Ni(II) content and with increasing oxidation rate of Fe(II). Ni(II) was found to have Fe₃O₄-suppressing effect under condition II.     

Magnetic anisotropy and magnetic properties of RTSi (R=Gd, Y; T=Mn, Fe) compounds

Magnetic properties of Gd_xY_1−xMnSi and GdMn_xFe_1−xSi compounds with CeFeSi-type structure have been studied by magnetization measurements in the temperature range 77–600 K in static magnetic fields up to 12 kOe. The measurements for some compounds have been carried out on single crystal samples. The easy magnetization direction of all single crystal samples was found to be the c axis. The value of the anisotropy constant K₁ for GdMnSi was estimated to be 2.0·10⁶ erg cm⁻³ at 77 K. The substitution in both rare earth and 3d sublattices leads to a sharp increase in magnetic anisotropy of these compounds. The concentration dependencies of magnetic ordering temperatures, effective magnetic moments and paramagnetic Curie temperatures have been determined. The obtained results can be explained by the modification of the band structure due to the change of interatomic distances and the filling of 3d band.     

Electrical behaviour of hydridofluorides of potassium–calcium KCaH3−xFx with x = 1, 1.5, 2, 2.5

This paper reports the results of the electrical conductivity measurements for KCaH_3−xF_x series with (x = 1, 1.5, 2, 2.5) in the temperature range 298–503 K.The activation energy of the electrical conductivity for the studied compounds depends on hydrogen amount and Reau's criteria. Differential thermal analysis curves were measured in the same temperature range 298–503 K.Possible correspondence between preferential order given by X-ray diffraction, thermal behaviour and electrical properties are discussed.     

The influence of gallium on the magnetocaloric properties of Gd5Si2Ge2

Gd₅Si₂Ge₂ was alloyed with varying amounts of Ga to study its influence on the giant magnetocaloric effect. Investigations on Gd₅(Si_2−xGe_2−x)Ga_2x with 2x = 0.03, 0.05 and 0.13 were carried out using X-ray powder diffraction, temperature and magnetic field dependent magnetization measurements, and differential scanning calorimetry. We observe that as the Ga content increases, the temperature stability range of the monoclinic phase narrows, and the orthorhombic structure gains stability. This is expected to be related to the decrease in the (Si/Ge)(Si/Ge) bond distance in the monoclinic phase. The maximum entropy change for the parent compound at 270 K was found to be 9.8 J kg⁻¹ K⁻¹ in an applied field of 5 T. For 2x = 0.03, this value reduces to 8.5 J kg⁻¹ K⁻¹, and the temperature corresponding to the maximum entropy change shifts marginally to 278 K. For other 2x values, the maximum entropy change further decreases.     

A substitution of nickel by antimony:: Crystal and electronic structure of the new antimonide Hf6Ni1−xSb2+x

The ternary antimonides Hf₆M_1−xSb_2+x (M=Fe, Co, Ni) were prepared by arc-melting of stoichiometric mixtures of Hf, HfSb₂ and M. According to the single crystal structure analyses, performed on Hf₆NiSb₂ and Hf₆Ni_0.76Sb_2.24, Hf₆M_1−xSb_2+x crystallizes in an ordered variant of the Fe₂P structure type with the M and Sb atoms occupying the two P positions on 1b and 2c of space group P

Full-size image

2m, respectively (Zr₆CoAl₂ type). The 3d metal atoms M can partially be replaced by antimony, leading to significant, anisotropic changes in the lattice dimensions which are a=765.6(1) pm, c=362.10(7) pm, V=183.81(5)×10⁶pm³ for Hf₆NiSb₂, and a=760.5(1) pm, c=372.40(7) pm, V=186.53(5)×10⁶pm³ for Hf₆Ni_0.76Sb_2.24 as determined by single crystal data. Calculations of the electronic structure of Hf₆NiSb₂ using the Extended Hückel approximation show strong bonding Hf–Hf, Hf–Ni, and Hf–Sb interactions.     

Structural, magnetic and electrical properties of (La0.70−xNdx)Sr0.30Mn0.70Cr0.30O3 with 0 ≤ x ≤ 0.30

The structural, magnetic and electrical properties of (La_0.70−xNd_x)Sr_0.30Mn_0.70Cr_0.30O₃ perovskites (0 ≤ x ≤ 0.30) prepared by the usual ceramic procedure were investigated. Structural Rietveld refinement revealed that these compounds crystallize in a rhombohedral perovskite structure when x = 0, 0.10 and 0.20, while for x = 0.30 the structure becomes orthorhombic (Pbnm). It was found that the substitution of La by Nd reduces the Curie temperature (T_C). The FC, ZFC, M(H) and AC susceptibility measurements show typical canted-antiferromagnetism for the Nd-doped samples, in which a ferromagnetic component coexists with predominant antiferromagnetic interactions. The values of the magnetization (M(H)) decrease very slightly when increasing the Nd content, compared to the undoped sample (M_S values at 5 T and 2 K are, respectively, 47.9, 47.3 and 47.5 emu/g for x = 0.10, 0.20 and 0.30, compared to 48.2 emu/g for x = 0), indicating that the Nd³⁺ contribution is negligible compared to the total moment of the ferromagnetic (Mn/Cr) network. The resistivity increases by several orders of magnitude with Nd-doping and the semi-conducting behaviour persists in the whole temperature range. The interaction between Mn⁴⁺–O–Cr³⁺and Cr³⁺–O–Cr³⁺ is responsible for the semi-conducting state.     

Investigation of the dependency of the upper critical magnetic field on the content x in Y1−xYbx/2Gdx/2Ba2Cu3O7−y superconducting structures

The Y_1−xYb_x/2Gd_x/2Ba₂Cu₃O_7−y superconducting samples for x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0 were prepared by using the solid-state reaction technique. Resistivity measurements of the samples were performed in QD–PPMS system under different magnetic fields up to 5 T in zero fields cooling regime. Using the resistivity data, the upper critical magnetic field H_c2(0) at T = 0 K for 50% of R_n was calculated by the extrapolation H_c2(T) to the temperature T = 0 K. The coherence length in T = 0 K were calculated from H_c2(0) and the effects of x in the composition on both the coherence length and the upper critical magnetic field were examined. The results showed that H_c2(0) varied from 84.05 to 122.26 T with the content x. The upper critical magnetic field in the temperature T = 0 K slightly decreased with increasing the content x. Using the content x, the upper critical magnetic field can be controlled and this can be used in the superconductivity applications.     

Magnetic phase diagram of CrTe1−xSbx (0.0≤x≤1.0)

Measurements of the high field magnetization of CrTe_1−xSb_x (0.0≤x≤1.0) were carried out at 4.2 K in pulsed magnetic fields up to 300 kOe. The temperature dependence of the magnetization of CrTe_1−xSb_x was measured in the temperature range from 4.2 K to 800 K. The magnetic phase diagram of CrTe_1−xSb_x (0.0≤x≤1.0) was determined, which is similar to the typical one for the mixed crystals of the layered antiferromagnetic and ferromagnetic compounds proposed by de Gennes.     

Influence of Co substitution on magnetoelastic properties of Er2Fe14−xCoxB (x = 1, 3 and 5) intermetallic compounds

The magnetostriction and thermal expansion of Er₂Fe_14−xCo_xB (x = 1, 3 and 5) intermetallic compounds were measured, using the strain gauge method in the temperature range 75–450 K under applied magnetic fields up to 1.5 T. For all samples the longitudinal magnetostriction (λ_l) undergoes an anomaly around the spin reorientation temperature (T_SR). It is also observed that λ_l decreases with increasing the Co content. All compounds show saturation type behaviour in their anisotropic magnetostriction curves at different temperatures and applied fields. The saturation behaviour of the compound with x = 3 occurs at higher temperatures than with x = 1 and 5. The volume magnetostriction strongly increases below μ₀H = 0.3 T, then monotonically rises with applied field up to the spin reorientation temperature. An invar type behaviour is observed above 200 K in the compound with x = 1. The results are discussed based on the temperature dependence of magnetocrystalline anisotropy of compounds below and above their T_SR.     

The role of valence electron concentration in the cohesive properties of YBxN1−x, YCxN1−x and YNxO1−x compounds

The mechanical properties are not yet understood at basic levels. Previous works shows that the greatest hardness for rock-salt structures (such as TiC_xN_1−x) is attained for a valence electron concentration (VEC) of 4.2 electrons per atom. The present work is aimed to explore this concept for yttrium-based compounds. By means of first principles calculations we did a systematical investigation where nitrogen in YN (VEC = 4) was supplanted by either of B, C or O to reduce or increase its VEC, forming YB_xN_1−x, YC_xN_1−x and YN_1−xO_x ternary compounds. We have calculated the cohesive energy (E_O), cell volume (V_O), bulk modulus (B_O) and density of states (DoS) as a function of VEC. The Fermi level (E_f,) is shifted toward the valence band by substituting B or C in YN, and toward the conduction band by means of O. It is concluded that the optimal position for E_f (maximum B_O) is linked to the saturation of electronic states with e_g-symmetry. At this point the excess of electrons provided by O starts filling antibonding states with t_2g-symmetry. That is, B_O increases monotonically as a function of VEC until VEC  4.1, after that point B_O decrease.     

Studies on structural and electrical properties of Co1−xNixFe1.9Mn0.1O4 ferrite

Nickel-doped iron-deficient cobalt ferrite with small amount of manganese having the chemical composition Co_1−xNi_xFe_1.9Mn_0.1O₄, with x = 0.2, 0.4, 0.6 and 0.8, were prepared by standard double sintering ceramic method. The spinel phase formation was confirmed by X-ray diffraction (XRD). The DC resistivity measurements with temperature indicate a semiconducting behavior showing a linear decrease with increasing temperature and the doping of Ni enhances the resistivity. Maximum resistivity of the order of 10⁹ Ω cm was found for composition x = 0.8. Room temperature dielectric constant measurements with frequency (100 Hz to 1 MHz), show usual dielectric dispersion. Also, the variation of room temperature AC conductivity as a function of frequency were studied and explained by using Maxwell–Wagner two-layer model. The studies on dielectric constant (′), loss tangent (tan δ) and AC conductivity (σ_AC), at four different frequencies (viz., 1, 10, 100 kHz and 1 MHz), with temperature were made.     

Effect of potassium doping on the structural, magnetic and magnetocaloric properties of La0.7Sr0.3−xKxMnO3 perovskite manganites

We investigate the effect of potassium doping on the structural, magnetic and magnetocaloric properties of La_0.7Sr_0.3−xK_xMnO₃ (x = 0.05, 0.1, 0.15 and 0.2) powder samples. Our polycrystalline compounds were synthesized using the solid-state reaction at high temperature. X-ray diffraction characterizations showed that all our studied samples crystallize in the distorted rhombohedral system with space group. With increasing potassium content, the unit cell volume exhibits a broad maximum around x = 0.15. Magnetization measurements versus temperature showed that all our samples exhibit a paramagnetic to ferromagnetic transition with decreasing temperature. The Curie temperature T_C is found to decrease from 365 K for x = 0 to 328 K for x = 0.2 as well as the saturated magnetization M_sp which shifts from 3.68 μ_B/Mn for x = 0 to 3.05 μ_B/Mn for x = 0.2. The critical exponent γ defined as M_sp (T) = M_sp(0)[1−(T/T_C)]^γ is found to remain almost constant and equal to 0.33 for all our samples. The maximum of magnetic entropy changes |ΔS_max| of La_0.7Sr_0.3−xK_xMnO₃ for x = 0.05 and 0.15 is found to be respectively, 1.37 and 1.2 J kg⁻¹ K⁻¹ under a magnetic field change of 1 T.     

Synthesis and characterization of new pyrochlore solid solution Bi1.5Sb1.5Cu1−xMnxO7

A new pyrochlore solid solution with formula Bi_1.5Sb_1.5Cu_1−xMn_xO₇ has been synthesized using ceramic method at 1000 °C. The cell parameter decreases linearly with increasing manganese concentration. Rietveld refinements for (B_1.5Mn_0.5)(Sb_1.5Mn_0.5)O₇ compound using X-ray powder diffraction data confirmed an overall A₂B₂O₇ cubic pyrochlore structure with a = 10.42749 (4) Å and Fd-3m symmetry. The reliability factors are R_wp = 3.48%; R_p = 2.37%; R_exp = 1.65% and R_Bragg = 1.58%. The magnetic susceptibility measurements achieved between 4 and 300 K indicate a paramagnetic behaviour with an oxidation state “2+” of the manganese ion. The electric resistance measured using complex impedance spectroscopy method put in evidence a decrease of the electric resistance with the temperature, which reached 5 × 10² Ω at 675 K. Dielectric properties depend on the variation of frequency and temperature, results indicate a conductive compound.