Synthesis and Microwave Dielectric Properties of Re3Ga5O12 (Re: Nd, Sm, Eu, Dy, Yb, and Y) Ceramics

Re₃Ga₅O₁₂ (Re: Nd, Sm, Eu, Dy, Yb, and Y) garnet ceramics were synthesized and their microwave dielectric properties were investigated for advanced substrate materials in microwave integrated circuits. The Re₃Ga₅O₁₂ ceramics sintered at 1350°–1500°C had a high-quality factor ( Q × f ) ranging from 40 000 to 192 173 GHz and a low-dielectric constant (ɛ_r) of between 11.5 and 12.5. They also exhibited a relatively stable temperature coefficient of resonant frequency (τ_f) in the range of −33.7 to −12.4 ppm/°C. In particular, the Sm₃Ga₅O₁₂ ceramics sintered at 1450°C exhibited good microwave dielectric properties of ɛ_r=12.4, Q × f =192 173 GHz, and τ_f=−19.2 ppm/°C.     

Dielectric Characteristics of Nd(Zn1/2Ti1/2)O3 Ceramics at Microwave Frequencies

The microwave dielectric properties and the microstructures of Nd(Zn_1/2Ti_1/2)O₃ (NZT) ceramics prepared by the conventional solid-state route have been studied. The prepared NZT exhibited a mixture of Zn and Ti showing 1:1 order in the B-site. The dielectric constant values (ɛ_r) saturated at 29.1–31.6. The quality factor ( Q × f ) values of 56 700–170 000 (at 8.5 GHz) can be obtained when the sintering temperatures are in the range of 1300°–1420°C. The temperature coefficient of resonant frequency τ_f was not sensitive to the sintering temperature. The ɛ _r value of 31.6, the Q × f value of 170 000 (at 8.5 GHz), and the τ_f value of −42 ppm/°C were obtained for NZT ceramics sintering at 1330°C for 4 h. For applications of high selective microwave ceramic resonators, filters, and antennas, NZT is proposed as a suitable material candidate.     

Dielectric Properties of (1−x)CaTiO3–xCa(Zn1/3Nb2/3)O3 Ceramic System at Microwave Frequency

The microwave dielectric properties of the (1− x )CaTiO₃– x Ca(Zn_1/3Nb_2/3)O₃ ceramic system have been investigated. The ceramic samples sintered at 1300°–1450°C for 4 h in air exhibit orthorhombic pervoskite and form a complete solid solution for different x value. When the x value increased from 0.2 to 0.8, the permittivity ɛ_r decreased from 115 to 42, the unloaded quality factor Q × f increased from 5030 to 13 030 GHz, and the temperature coefficient τ_f decreased from 336 to −28 ppm/°C. When x =0.7, the best combination of dielectric properties, a near zero temperature coefficient of resonant frequency of τ_f∼−6 ppm/°C, Q × f ∼10 860 GHz and ɛ_r∼51 is obtained.     

Microwave Dielectric Properties of La6Mg4A2W2O24 [A=Ta and Nb] Ceramics

The microwave dielectric properties of two A-site-deficient perovskite-type ceramics in the La₆Mg₄A₂W₂O₂₄ [A=Ta and Nb] system were investigated. The compounds were synthesized by the solid-state ceramic route. The structure and microstructure were analyzed using X-ray diffraction and scanning electron microscopy techniques. The dielectric properties were measured in the microwave frequency range [4–6 GHz] by the resonance method. La₆Mg₄Ta₂W₂O₂₄ had Q _u× f =13 600 GHz, ɛ_r=25.2, and τ_f=−45 ppm/°C and La₆Mg₄Nb₂W₂O₂₄ had Q _u× f =16 400 GHz, ɛ_r=25.8, and τ_f=−56 ppm/°C.     

Low-Loss Microwave Dielectrics Using Mg2(Ti1−xSnx)O4 (x=0.01–0.09) Solid Solution

Low-loss ceramics having the chemical formula Mg₂(Ti_{1− x} Sn _x )O₄ for x ranging from 0.01 to 0.09 have been prepared by the conventional mixed oxide route and their microwave dielectric properties have been investigated. X-ray powder diffraction patterns indicate the corundum-structured solid solutions for the prepared compounds. In addition, lattice parameters, which linearly increase from 8.4414 to 8.4441 Å with the rise of x from 0.01 to 0.09, also confirm the forming of solid solutions. By increasing x from 0.01 to 0.05, the Q × f of the specimen can be tremendously boosted from 173 000 GHz to a maximum 318 000 GHz. A fine combination of microwave dielectric properties (ɛ_r∼15.57, Q × f ∼318 000 GHz at 10.8 GHz, τ_f∼−45.1 ppm/°C) was achieved for Mg₂(Ti_0.95Sn_0.05)O₄ ceramics sintered at 1390°C for 4 h. Ilmenite-structured Mg(Ti_0.95Sn_0.05)O₃ (ɛ_r∼16.67, Q × f ∼275 000 GHz at 10.3 GHz, τ_f∼−53.2 ppm/°C) was detected as a second phase. The presence of the second phase, however, would cause no significant variation in the dielectric properties of the specimen, because the second phase properties are very similar to the primary phase. These unique properties, in particular, low ɛ_r and high Q × f , can be utilized as a very promising dielectric material for ultra-high-frequency applications.     

Glass-Free Zn2Te3O8 Microwave Ceramic for LTCC Applications

A Zn₂Te₃O₈ ceramic was investigated as a promising dielectric material for low-temperature co-fired ceramics (LTCC) applications. The Zn₂Te₃O₈ ceramic was synthesized using the solid-state reaction method by sintering in the temperature range 540°–600°C. The structure and microstructure of the compounds were investigated using X-ray diffraction (XRD) and scanning electron microscopy methods. The dielectric properties of the ceramics were studied in the frequency range 4–6 GHz. The Zn₂Te₃O₈ ceramic has a dielectric constant (ɛ_r) of 16.2, a quality factor ( Q _u× f ) of 66 000 at 4.97 GHz, and a temperature coefficient of resonant frequency (τ_f) of −60 ppm/°C, respectively. Addition of 4 wt% TiO₂ improved the τ_f to −8.7 ppm/°C with an ɛ_r of 19.3 and a Q _u× f of 27 000 at 5.14 GHz when sintered at 650°C. The chemical reactivity of the Zn₂Te₃O₈ ceramic with Ag and Al metal electrodes was also investigated.     

Reduced Dielectric Loss of Modified ZnNb2O6 Ceramics by Substituting Nb5+ with Ta5+

The effects of substituting Nb⁵⁺ with Ta⁵⁺ on the microwave dielectric properties of the ZnNb₂O₆ ceramics were investigated in this study. The forming of Zn(Nb_{1− x} Ta _x )₂O₆ ( x =0–0.09) solid solution was confirmed by the measured lattice parameters and the EDX analysis. By increasing x , not only could the Q × f of the Zn(Nb_{1− x} Ta _x )₂O₆ ( x =0–0.09) solid solution be tremendously boosted from 83 600 GHz at x =0 to a maximum 152 000 GHz at x =0.05, the highest ɛ_r∼24.6 could also be achieved simultaneously. It was mainly due to the uniform grain morphology and the highest relative density of the specimen. A fine combination of microwave dielectric properties (ɛ_r∼24.6, Q × f ∼152 000 GHz at 8.83 GHz, τ_f∼–71.1 ppm/°C) was achieved for Zn(Nb_0.95Ta_0.05)₂O₆ solid solution sintered at 1175°C for 2 h.     

Microwave Dielectric Properties of CaTiO3-CaAl1/2Nb1/2O3 Ceramics Doped with Li3NbO4

The microwave dielectric properties of CaTi_{1− x} (Al_1/2Nb_1/2) _x O₃ solid solutions (0.3 ≤ x ≤ 0.7) have been investigated. The sintered samples had perovskite structures similar to CaTiO₃. The substitution of Ti⁴⁺ by Al³⁺/Nb⁵⁺ improved the quality factor Q of the sintered specimens. A small addition of Li₃NbO₄ (about 1 wt%) was found to be very effective for lowering sintering temperature of ceramics from 1450–1500° to 1300°C. The composition with x = 0.5 sintered at 1300°C for 5 h revealed excellent dielectric properties, namely, a dielectric constant (ɛ_r) of 48, a Q × f value of 32 100 GHz, and a temperature coefficient of the resonant frequency (τ_f) of −2 ppm/K. Li₃NbO₄ as a sintering additive had no harmful influence on τ_f of ceramics.     

Synthesis of BaCu(B2O5) Ceramics and their Effect on the Sintering Temperature and Microwave Dielectric Properties of Ba(Zn1/3Nb2/3)O3 Ceramics

BaCu(B₂O₅) ceramics were synthesized and their microwave dielectric properties were investigated. BaCu(B₂O₅) phase was formed at 700°C and melted above 850°C. The BaCu(B₂O₅) ceramic sintered at 810°C had a dielectric constant (ɛ_r) of 7.4, a quality factor ( Q × f ) of 50 000 GHz and a temperature coefficient of resonance frequency (τ_f) of −32 ppm/°C. As the BaCu(B₂O₅) ceramic had a low melting temperature and good microwave dielectric properties, it can be used as a low-temperature sintering aid for microwave dielectric materials for low temperature co-fired ceramic application. When BaCu(B₂O₅) was added to the Ba(Zn_1/3Nb_2/3)O₃ (BZN) ceramic, BZN ceramics were well sintered even at 850°C. BaCu(B₂O₅) existed as a liquid phase during the sintering and assisted the densification of the BZN ceramic. Good microwave dielectric properties of Q × f =16 000 GHz, ɛ_r=35, and τ_f=22.1 ppm/°C were obtained for the BZN+6.0 mol% BaCu(B₂O₅) ceramic sintered at 875°C for 2 h.     

High-Q Microwave Dielectrics in the (Mg1−xCox)2TiO4 Ceramics

The microwave dielectric properties and the microstructures of (Mg_{1− x} Co _x )₂TiO₄ ceramics prepared by the conventional solid-state route were investigated. Lattice parameters were also measured for specimens with different x . The formation of solid solution (Mg_{1− x} Co _x )₂TiO₄ ( x =0.02–0.1) was confirmed by the X-ray diffraction patterns, energy dispersive X-ray analysis, and the lattice parameters measured. By increasing x from 0 to 0.05, the Q × f of the specimen can be tremendously boosted from 150 000 GHz to a maximum of 286 000 GHz. A fine combination of microwave dielectric properties (ɛ_r∼15.7, Q × f ∼286 000 GHz at 10.4 GHz, τ_f∼−52.5 ppm/°C) was achieved for (Mg_0.95Co_0.05)₂TiO₄ ceramics sintered at 1390°C for 4 h. Ilmenite-structured (Mg_0.95Co_0.05)TiO₃ was detected as a second phase. The presence of the second phase would cause no significant variation in the dielectric properties of the specimen because it possesses compatible properties compared with that of the main phase. In addition, only a small deviation in the dielectric properties was monitored for specimens with x =0.04–0.05 at 1360°–1420°C. It not only provides a wide process window but also ensures an extremely reliable material proposed as a very promising dielectric for low-loss microwave and millimeter wave applications.     

Tailoring the Microwave Dielectric Properties of MgNb2O6 and Mg4Nb2O9 Ceramics

The columbites MgNb₂O₆, MgTa₂O₆, and corundum-type Mg₄Nb₂O₉ ceramics were prepared by the conventional solid-state ceramic route. The structure and microstructure of the sintered samples were investigated by X-ray diffraction and scanning electron microscopic techniques. The microwave dielectric properties of the samples were measured by the resonance method in the frequency range 4–6 GHz. The dielectric properties have been tailored by forming a solid solution between MgNb₂O₆ and MgTa₂O₆ and by the substitution of TiO₂ for Nb₂O₅ in both MgNb₂O₆ and Mg₄Nb₂O₉ ceramics. The Mg(Nb_0.7Ta_1.3)O₆ has ɛ_r=29, Q _u× f =67 800 GHz, and τ_f=0.8 ppm/°C and the MgO–(0.4)Nb₂O₅–(1.5)TiO₂ composition has ɛ_r=34.5, Q _u× f =81 300 GHz, and τ_f=−2 ppm/°C.     

Microstructures and Microwave Dielectric Characteristics of CaRAlO4 (R = Nd, Sm, Y) Ceramics with Tetragonal K2NiF4 Structure

CaRAlO₄ (R = Nd, Sm, Y) ceramics with a K₂NiF₄ structure were prepared by a solid-state reaction approach, and their microwave dielectric characteristics were evaluated, along with their microstructures. Dense CaNdAlO₄, CaSmAlO₄, and CaYAlO₄ ceramics were obtained by sintering at 1425°–1500°C in air for 3 h, and good microwave dielectric characteristics were achieved: (1) ɛ= 18.2, Qf = 17 980 GHz, τ_f=−52 ppm/°C for CaNdAlO₄; (2) ɛ= 18.2, Qf = 51 060 GHz, τ_f=−3 ppm/°C for CaSmAlO₄; and (3) ɛ= 18.9, Qf = 39 960 GHz, τ_f= 6 ppm/°C for CaYAlO₄.     

Effects of Ca/Ti Cosubstitution upon Microwave Dielectric Characteristics of CaSmAlO4 Ceramics

(Ca_{1+ x} Sm_{1− x} )(Al_{1− x} Ti _x )O₄ (0≤ x ≤0.4) ceramics were synthesized by solid-state reaction method and their microstructures and microwave dielectric properties were investigated. X-ray diffraction analysis and energy-dispersive X-ray analysis indicated that the matrix phase was a solid solution with a composition represented by the chemical formula (Ca_{1+ x} Sm_{1− x} ) (Al_{1− x} Ti _x )O₄ and minor amount of (Ca,Sm)(Al,Ti)O₃ secondary phase was detected. Ca/Ti cosubstitution could significantly improve the microwave dielectric characteristics of CaSmAlO₄ ceramics, and the excellent microwave dielectric characteristics were obtained in the modified ceramics as ɛ_r=19–23, Q × f =49 100–118 700 GHz, and τ_f=−15–15 ppm/°C.     

Effect of Zn/Si Ratio on the Microstructural and Microwave Dielectric Properties of Zn2SiO4 Ceramics

Zn₂SiO₄ ceramics synthesized by the conventional solid-state method exhibited a low Q × f value, possibly due to the formation of a ZnO second phase. However, with a small ZnO reduction from the Zn₂SiO₄ ceramics, the ZnO second phase disappeared and grain growth occurred due to the formation of a Si-rich liquid phase. Specimens with a large grain size exhibited an improved Q × f value. In particular, the ceramics with nominal composition Zn_1.8SiO_3.8 sintered at 1300°C exhibited improved microwave dielectric properties of ɛ_r=6.6, Q × f =147 000 GHz, and τ_f=−22 ppm/°C.     

A Novel Temperature-Compensated Microwave Dielectric (1−x)(Mg0.95Ni0.05)TiO3−xCa0.6La0.8/3TiO3 Ceramics System

The microstructure and microwave dielectric properties of a (1− x )(Mg_0.95Ni_0.05)TiO₃− x Ca_0.6La_0.8/3TiO₃ ceramics system have been investigated. The system was prepared using a conventional solid-state ceramic route. In order to produce a temperature-stable material, Ca_0.6La_0.8/3TiO₃ was added for a near-zero temperature coefficient (τ_f). With partial replacement of Mg²⁺ by Ni²⁺, the dielectric properties of the (1− x )(Mg_0.95Ni_0.05)TiO₃− x Ca_0.6La_0.8/3TiO₃ ceramics can be promoted. The microwave dielectric properties are strongly correlated with the sintering temperature and the composition. An excellent Q × f value of 118,000 GHz can be obtained for the system with x =0.9 at 1325°C. For practical application, a dielectric constant (ɛ_r) of 24.61, a Q × f value of 102,000 GHz, and a temperature coefficient of resonant frequency (τ_f) of −3.6 ppm/°C for 0.85(Mg_0.95Ni_0.05)TiO₃−0.15Ca_0.6La_0.8/3TiO₃ at 1325°C are proposed. A parallel-coupled line band-pass filter is designed and simulated using the proposed dielectric to study its performance.     

Low Loss Dielectrics in the Ca(B'1/2Nb1/2)O3 [B'=Lanthanides, Y] System

The Ca(B'_1/2Nb_1/2)O₃ [B'=La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Yb, and In] complex perovskites have been prepared by conventional solid-state ceramic route. The structure and microstructure of the ceramics have been characterized by X-ray diffraction and scanning electron microscopy methods. The ceramics have dielectric constant (ɛ_r) in the range 23–32, normalized Q -factor ( Q _u× f ) 11 000–38 000 GHz and temperature coefficient of resonant frequency (τ_f) −43–5.2 ppm/°C. The microwave dielectric properties of Ca(B'_1/2Nb_1/2)O₃ ceramics are found to depend on the ionic radii of B'-site elements and tolerance factor ( t ). The substitution of Ba²⁺ and Sr²⁺ for Ca²⁺ resulted a phase transition in Ca(B'_1/2Nb_1/2)O₃ ceramics. The (Ca_0.05Ba_0.95) (Y_1/2Nb_1/2)O₃ has τ_f close to zero (1.2 ppm/°C) with ɛ_r=35 and Q _u× f =48 500 GHz and is proposed as a useful material for base station applications. Dielectric properties of the Ca(B'_1/2Nb_1/2)O₃ ceramics were tailored by the addition of TiO₂ and CaTiO₃.     

Preparation and Dielectric Properties of Low-Temperature-Sinterable (Zr0.8Sn0.2)TiO4 Powder

Low-temperature-sinterable (Zr_0.8Sn_0.2)TiO₄ powders were prepared using 3 mol% Zn(NO₃)₂ additive and then compared with powders prepared using 3 mol% ZnO additive and no additives. Sintering at 1200°C for 2 h produced a dielectric ceramic with ρ= 98.6% of theoretical density (TD), ɛ_r= 38.4, Q × f (GHz) = 42000, and τ _f =−1 ppm/°C. Sintering at 1250°C resulted in an excellent dielectric with ρ= 99% of TD, epsilon_r= 40.9, Q × f (GHz) = 49000, and τ _f =−2 ppm/°C. Scanning electron microscopy showed a microstructure with grains measuring 0.5 to 1 μm, and transmission electron microscopy revealed secondary phase in the grain boundaries.     

Structure and Microwave Dielectric Characteristics of Ca1+xNd1−xAl1−xTixO4 Ceramics

CaNdAlO₄ microwave dielectric ceramics were modified by Ca/Ti co-substitution, and their dielectric characteristics were evaluated along with their structure and microstructures. Ca_{1+ x} Nd_{1− x} Al_{1− x} Ti _x O₄ ( x =0, 0.025, 0.05, 0.10, 0.15, 0.20) ceramics with the relative density of over 95% theoretical density were obtained by sintering at 1400°–1450°C in air for 3 h, where the K₂NiF₄-type solid solution single phase was determined from the compositions of x <0.20, while a small amount of CaTiO₃ secondary phase was detected for x =0.20. With Ca/Ti co-substitution in CaNdAlO₄ ceramics, the dielectric constant (ɛ_r) increased with increasing x , and the temperature coefficient of resonant frequency (τ_f) was adjusted from negative to positive, while the Q × f ₀ value increased significantly at first and reached an extreme value at x =0.025 and the maximum at x =0.15. The best combination of microwave dielectric characteristics were achieved at x =0.15 (ɛ_r=19.5, Q × f ₀=93 400 GHz, τ_f=−2 ppm/°C). The improvement of the Q × f ₀ value primarily originated from the reduced interlayer polarization with Ca/Ti co-substitution, while the decreased tolerance factor, the subsequent increased interlayer stress, and the appearance of CaTiO₃ secondary phase brought negative effects upon the Q × f ₀ value.     

Sintering Behavior and Dielectric Properties of Bi3NbO7 Ceramics Prepared by Mixed Oxides and High-Energy Ball-Milling Methods

The sintering behavior and dielectric properties of Bi₃NbO₇ ceramics prepared by the high-energy ball milling (HEM) method and conventional mixed oxides method with V₂O₅ addition were investigated. All the samples were sintered between 840° and 960°C. For the ceramics prepared by the mixed oxides method, the pure tetragonal Bi₃NbO₇ phase formed without any cubic phase. With changing sintering temperature, the dielectric constant ɛ_r lies between 79 and 92, while the Q × f values are between 300 and 640 GHz. The samples sintered at 870°C have the best microwave dielectric properties with ɛ_r=79, Q × f =640 GHz, and the temperature coefficients of resonant frequency τ_f between 0 and −20 ppm/°C. For the ceramics prepared by the HEM, a pure cubic phase was obtained. The ɛ_r changes between 78 and 80 and Q × f were between 200 and 290 GHz.     

Structure and Microwave Dielectric Properties of Hexagonal Ba[Ti1−x(Ni1/2W1/2)x]O3 Ceramics

Microwave dielectric ceramics with the composition of Ba[Ti_{1− x} (Ni_1/2W_1/2) _x ]O₃ ( x =0.4–0.6) were prepared by a solid-state reaction method. The evolution of the crystalline phases was investigated by X-ray powder diffraction analysis. A cubic-to-hexagonal phase transition occurred between 1000° and 1300°C. The phase transition is irreversible; thus, the hexagonal phase remains stable at room temperature. The X-ray powder diffraction data for x =0.5 were refined using the Rietveld method. It was identified as a h -BaTiO₃-type hexagonal perovksite with the space group of P 6₃/ mmc . It also reveals that random occupancy of Ti⁴⁺ and W⁶⁺ ions occurs in the B-site substructures, whereas Ni²⁺ ions exclusively occupy the octahedral site in the corner-sharing octahedron. The dielectric properties of dense-sintered ceramics were characterized at microwave frequencies. With an increase in x from 0.4 to 0.6, the Q × f value increased from 26 700 to 42 000 GHz, whereas ɛ_r decreased from 29.8 to 20.0, and τ_f from +6.5 to −9.9 ppm/°C.