Synthesis of new metal-containing side-chain monomers and polymers

New metal-containing vinyl monomers, hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hexyl-6-oxy-{4-[4-(4-ferrocenoyl phenyl)phenyl]benzoyloxy}methacrylate, and the corresponding homopolymers and random copolymers with hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate were synthesized. The compounds were characterized by¹H NMR; their thermal behavior was investigated by means of differential scanning calorimetry. Monomers and polymers containing the ferrocene unit melt at lower temperatures than those derived from the cyclopentadienyl managanese tricarbonyl moiety. The melting temperatures of the monomers and polymers ranged from 399 to about 515 K, Both monomers and polymers failed to exhibit mesogenic behavior. Values ofM _n,M _w,M _w/M _n, and degree of polymerization were obtained by gel permeation chromatography. TheM _n ranged from 16,500 for the copolymer containing hexyl-6-oxy-{4-[4-(4-ferrocenoyl phenyl)phenyl] benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio to 26,000 for the copolymer containing hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio.M _w/M _n ranged from 1.6 in the case of the copolymer containing hexyl-6-oxy-{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate and hydroxy monomer hexyl-6-oxy-{4-[4-(4-hydroxyphenyl)phenyl]benzoyloxy}methacrylate at a 1:3 ratio to 2.2 in the case of poly(hexyl-6-oxy{4-[4-(4-carboxy cyclopentadienyl manganese tricarbonyl phenyl)phenyl]benzoyloxy}methacrylate).     

Synthesis, Characterization and Optimum Reaction Conditions of Oligo-N, N′-bis (2-hydroxy-1-naphthalidene) Thiosemicarbazone

The oxidative polycondenzation reaction conditions of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (HNTSC) using air oxygen, H₂O₂ and NaOCl were studied in an aqueous alkaline medium between 50–90°C. Oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. Solubility testing of oligomer was investigated using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene acetonitrile, ethyl acetate, concentrated H₂SO₄ and an aqueous alkaline solution. Using NaOCl, H₂O₂ and air O₂ oxidants, conversion to oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (OHNTSC) of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was found to be 85, 80 and 76%, respectively, in an aqueous alkaline medium. According to the SEC analyses, the number-average molecular weight, weight-average molecular weight and polydispersity index values of OHNTSC synthesized were found to be 1050 gmol^–1 1715 gmol^–1 and 1.63, using NaOCl, and 2137, 2957 gmol^–1 and 1.38, using air O₂ and 2155 gmol^–1 4164 gmol^–1 and 1.93, using air H₂O₂, respectively. Also, TG analysis was shown to be unstable of oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone against thermo-oxidative decomposition. The weight loss of OHNTSC was found to be 97.29% at 900°C.     

Shape-Selective Alkylation of Biphenyl over H-[Al]-SSZ-31 with Propylene

Isopropylation of biphenyl (BP) over [Al]-SSZ-31, a large-pore, one-dimensional zeolite has been studied. Effects of temperature, pressure and SiO₂/Al₂O₃ ratio were examined. SSZ-31 was found to be an active catalyst in the isopropylation of biphenyl with propylene. The selectivity for 4-isopropylbiphenyl (4-IPBP) and 4,4-diisopropylbiphenyl (4,4-DIPB) was high among isopropylbiphenyl (IPBP) and diisopropylbiphenyl (DIPB) isomers, respectively, indicating SSZ-31 shows shape-selective catalysis. The selectivity for 4,4-DIPB decreased with temperature increase; correspondingly the selectivity for thermodynamically more stable isomers (3,3- and 3,4 DIPB) increased with temperature. The yield of IPBP isomers decreased while that of DIPB isomers increased with temperature increase. Pressure showed less effect on conversion; however, increase in pressure suppresses the isomerization of 4,4-DIPB to 3,3- and 3,4-DIPB. Conversion decreased with increase in SiO₂/Al₂O₃ ratio. At low SiO₂/Al₂O₃ ratio of 136, relatively high triisopropylbiphenyl (TriIPB) isomers were formed in bulk products and their amount decreased with increase in SiO₂/Al₂O₃ ratio.     

Comparison of some 4- and 4,4′-substituted derivatives of stilbene for their reactivities towards the benzoyloxy radical

Summary 4-Fluoro- and 4,4-difluorostilbene are similar in their reactivities towards the benzoyloxy radical; a similar conclusion has been reached in respect of 4-chloro- with 4,4-dichlorostilbene and 4-phenyl-with 4,4-diphenylstilbene. These results have been obtained by consideration of the numbers of benzoate and phenyl end-groups in poly (methyl methacrylate) made using benzoyl peroxide in the presence of the appropriate derivative of stilbene.     

Syntheses and properties of polyimides based on bis(p-aminophenoxy)biphenyls

Three biphenyl unit-containing diamines,4,4-bis(p-aminophenoxy)biphenyl (III_a), 2,2-bis(p-aminophenoxy)biphenyl (III_b), and 3,3,5,5-tetramethyl-4,4-bis(p-aminophenoxy)biphenyl (III_c), were prepared by the chlorodisplacement ofp-chloronitrobenzene with 4,4-biphenol (I_a), 2,2-biphenol (I_b), and 3,3,5,5-tetramethyl-4,4-biphenol (I_c), respectively, giving the corresponding bis(nitrophenoxy) compounds II_a-c, followed by catalytic reduction with palladium (Pd) and hydrazine. Three series of polyimidesp-PI,o-PI, and Me-PI were prepared from diamines III_a-c and aromatic tetracarboxylic dianhydrides via a two-stage procedure that included ring-opening polyaddition to give poly(amic acid)s followed by thermal cyclodehydration to polyimides. The resultant three series of poly(amic acid)s had inherent viscosities of 1.09–2.83, 0.78–1.93, and 1.55–3.09 dL/g, respectively. Almost all the poly(amic acid)s could be solution-cast and thermally converted into transparent, flexible, and tough polyimide films. All the polyimides were characterized by solubility, tensile test, wide-angle X-ray scattering measurements, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Effects of the structures of aromatic diamines and dianhydrides on the properties of polyimides were investigated.     

Ethynylene-disilanylene copolymers

Polymers of structure (SiR₂SiR₂-C C-SiR₂SiR₂-C C) _n , in which ethynylene units alternate with disilylene units, have been prepared by two routes: (a) condensation of dichlorodisilanes with dilithium derivatives of 1,2-diethynyldisilanes and (b) ring-opening polymerization of strained cyclic disilanylene-acetylnes, (SiR₂SiR₂C C)₂. The polymers display UV absorption near 240 nm indicative of – conjugation between the Si₂ and the C C moieties. Polymers with R=R=n-Bu or R=n-Bu, R=Ph, undergo solid-state transitions to form liquid crystalline mesophases resembling those observed for many poly(silylenes). Single crystals were obtained for the polymer with R=R=CH₃, by precipitation from dilute cyclohexane solution. The solid-state properties and structures of this family of polymers are discussed.This paper was presented at the Second International Topical Workshop, Advances in Silicon-Based Polymer Science.     

Preparation of poly(alkylvinylether)s for nonlinear optical applications

Summary 3,5-Dimethoxy-4-(2-vinyloxyethoxy)-4-nitrostilbene 2 and 3,5-dimethoxy-4-(2-vinyloxyethoxy)-2,4-dinitrostilbene 5 were prepared by the reactions of 2-iodoethyl vinyl ether with 3,5-dimethoxy-4-hydroxy-4-dinitrostilbene 1 and 3,5-dimethoxy-4-hydroxy-2,4-dinitrostilbene 4, respectively. Monomers 2 and 5 were polymerized with cationic initiators to obtain polymers with the NLO-phores 3,5-dimethoxy-4-oxy-4-nitrostilbene and 3,5-dimethoxy-4-oxy-2,4-nitrostilbene in the side chain. The resulting polymer 3 and 6 were soluble in DMSO and DMF. The inherent viscosities of polymers were in the range of 0.28–0.33 dL/g in DMSO. Polymers 3 and 6 showed good thermal stabilities in their TGA thermograms, and the T_g values from DSC thermograms were in the range of 81–87°C.     

Enthalpy relaxation studies in isotactic polystyrene. Effects of crystallinity

Summary The enthalpy relaxation of the amorphus isotactic polystyrene is strongly affected from the crystalline phase induced by annealing at temperatures between Tg and Tm. All the parameters describing the relaxation process, H, T_max and T_ons depend also on the above T_g annealing conditions as the induced crystallinity alters the quantity and the quality (i.e.Tg, T_gons, T_g) of the remaining amorphous phase.     

The synthesis and characterization of a mesomorphic brush type polycarbosilane: poly[1,1-bis(4′-biphenyl)silabutane]

Summary Poly[1,1-bis(4-biphenyl)silabutane] (II) has been prepared by the anionic ring opening polymerization of 1,1-bis(4-biphenyl)silacyclobutane. II shows mesomorphic behavior by DSC. The¹³C NMR T₁ relaxation times have been measured. These are found to be smaller than those of poly(1,1-dimethylsilabutane)by an order of magnitude. This may result from interaction of the highly rigid biphenyl side chain moieties. The thermal stability of II is higher than that for other 1,1-disubstituted polysilabutanes.     

Synthesis and characterization of poly(ethyl vinyl ether) containing the NLO-phore 4′-oxy-4-nitrostilbene in the side chain

Summary 4-(2-Vinyloxyethoxy)-4-nitrostilbene 2 was prepared by the reaction of 4-hydroxy-4-nitrostilbene 1 with 2-iodoethyl vinyl ether. Monomer 2 was polymerized with cationic initiators to obtain a poly(ethyl vinyl ether) with the NLO-phore 4-oxy-4-nitrostilbene in the side chain. The resulting polymer 3 was soluble in common solvents such as chloroform and DMSO. The inherent viscosities of polymer 3 were in the range of 0.25–0.30 dL/g in chloroform. Polymer 3 showed a good thermal stability in TGA thermogram. Solution-cast films were cloudy and brittle with a T_g of 63°C.     

Photochromic polymers

Summary Two soluble photochromic polymers containing 1-(ß-hydroxyethyl)-3,3-dimethyl-6-nitrospiro[2H-1-benzopyran-2,2-indoline] bound on a variously long side chain were prepared. It was found that the discolouration process depends on the length of the side chain to which the photochromic centre is bound.     

Chemical modification of copoly(methylsilylene/1,4-phenylene) by Pt-catalyzed hydrosilation reactions with functionally substituted alkenes

Copoly(methyl-3-biphenoxypropylsilylene 1,4-phenylene), copoly(methyl-3-cyanopropylsilylene 1,4-phenylene), copoly(methyl-3-ethoxypropylsilylene 1,4-phenylene), copoly(methyl-3-phenoxypropylsilylene 1,4-phenylene), and copoly(methyl-4,7,10,13-tetraoxatetradecanylsilylene 1,4-phenylene) have been prepared by platinum-catalyzed hydrosilation graft reactions between poly (methylsilylene 1,4-phenylene) and appropriate functionally substituted alkenes. These polymers have been characterized by¹H,¹³C, and²⁹Si NMR as well as by FT-IR and UV-vis spectroscopy. The molecular weight distribution of these polymers has been determined by gel permeation chromatography (GPC), and their glass transition temperatures (T _e) by DSC.     

High-Performance Directional Metallopolyamides. I. Synthesis and Thermal Analysis

High-performance polyamides containing the 4,4-disubstituted-2,2-bipyridyl moiety were synthesized by phosphorylation polycondensation from 2,2-bipyridyl-4,4-dicarboxylic acid and a series of primary aromatic diamines with triphenylphosphite and pyridine as the agents to facilitate condensation. Polyamides exhibiting improved solubility in organic solvents and strong acids, melting transitions at low temperatures, and good thermal properties were prepared by introducing bulking methyl and fluoro groups and flexible ether and propyl linkages and by using monomers with reduced symmetry. Solutions of the polyamides with rigid main chains (III, IV, V, VI, and VIII) showed birefringence (colorful spherulites) at concentrations of 5, 10, and 15% (w/v) polymer/solvent. The chelation of ruthenium(II) ions resulted in the preparation of directional metallopolyamide systems based on the geometrically favorable tris(2,2-bipyridyl)ruthenium(II) complex. The three-dimensional polyamides, which absorbed at a _max of 476 mm and emitted at a _max of 620 nm, exhibited a high thermal stability and improved solubility, making them suitable candidates for compressive strength studies and cyclic voltammetry studies as part of an effort to address the corrosion of graphite fiber-reinforced composites.     

Electrosynthesis of 4,4′-dinitroazobenzene on PbO2 electrodes

Parameters which affect the electrosynthesis of 4,4-dinitroazobenzene from p-nitroaniline on platinum and PbO₂ electrodes were investigated and optimum conditions were determined. Maximum conversion efficiency for electrosynthesis was 95% with a pure -PbO₂ electrode. It was found that the electrocatalytic activity of a PbO₂ electrode depends upon its / ratio and its degree of crystallinity. The effects of the added base and water on the conversion efficiency were also elucidated.     

Cyclic organosilicon compounds

Cyclic organosilicon compounds were obtained by the coupling reaction of 1,4-dilithium-1,1,4,4-tetraphenylbutane and organochlorosilanes with general formula RR SiCl_z (R=methyl, R=ethyl, phenyl, vinyl, p-tolyl). The chemical analysis, molecular weight determination, IR spectra have shown that new compounds have been formed by ring closure through a siloxane bond. The thermogravimetric analysis indicates a thermal stability of compounds up to 360°C.     

Thermal imidization behavior of aromatic poly(amic dialkyl ester) precursors derived from biphenyltetracarboxylic dianhydride

Summary Poly(amic dialkyl ester) precursors of high performance poly(4,4-oxydiphenylene biphenyltetracarboximide) (BPDA-ODA) and poly(p-phenylene biphenyltetracarboximide) (BPDA-PDA) were synthesized and their thermal imidizations were investigated isothermally and nonisothermally by thermogravimetry. All precursors showed a two-step imidization behavior, fast imidization at early stage and slow imidization at intermediate and later stage. Kinetic parameters were estimated from the conversion versus time plots with the first-order rate equation. The imidization behaviors observed were interpreted with considering the T_g variation, the natures of alkyl leaving group and precursor backbone, and the flexibility of polymer chain. In addition, the onset temperature of imidization and T_g of precursors were estimated from the imidization kinetic data.     

Polymerization of an Acetoxyvinyl Substituted Chlorocyclophosphazene

The vinyl acetate derivative, gem-isopropyl-2-(-acetoxyvinyl)tetrachlorocyclotriphosphazene (1), has been used in radical homopolymerization and copolymerization reactions with methyl methacrylate, (MMA) and styrene. The 1,1-disubstituted olefin did not undergo radical homopolymerization. Copolymers derived from MMA and 1 contained only low amounts (<2 mol%) of 1. A maximum incorporation of 20 mol% of phosphazene monomer was achieved with styrene as comonomer. The data obtained in low- and high-conversion copolymerizations with styrene were used to calculate the monomer reactivity ratios. The results of the calculations show that the terminal model is not operative. Calculation for the penultimate model with r ₂=0 resulted in r ₁ and r₁ values of 2.8±0.2 and 0.7±0.1, respectively. For the hypothetical homopolymer of 1 a T _g value of 441 K was calculated. All the copolymers with styrene exhibit flame-retardant properties.     

The vinylation of bromobiphenyls using homogeneous nickel catalysts

The vinylation of 4-bromo-4-hydroxybiphenyl and ethyl acrylate was studied using the catalyst NiCl₂-H₂O/PPh₃ in the presence of inorganic base. Ethyl 4-(4-hydroxyphenyl)cinnamate was formed as vinylation product with a selectivity as high as 98%. The effect of solvent, ligand and base for some halides was examined to show the applicability of the catalyst system.     

Crystallization and melting of <Emphasis Type="Italic">α</Emphasis> and <Emphasis Type="Italic">β</Emphasis> phases in bulk syndiotactic polystyrene as monitored in situ via high-temperature wide-angle X-ray diffraction

Direct and non-intrusive observations of crystallization and melting behavior of and polymorphs in bulk syndiotactic polystyrene were made by means of temperature-programmed x-ray diffraction. Results indicated that the highest sustainable temperature identifiable via wide-angle x-ray diffraction using stepwise annealing at increasingly higher temperatures (T _a) for the perfected (with the initial crystallization temperature T _c = 245 °C, followed by annealing at stepwise increased T _a above 250 °C) phase may be at least 286 °C. In a similar manner, the highest sustainable temperature of the perfected (with T _c = 265 °C, followed by annealing at stepwise increased T _a above 275 °C) phase may be at least 280 °C. These observations suggest complete melting should occur only above the respective sustainable temperatures. It thus follows that equilibrium melting of the and the phases should occur at temperatures higher than 286 and 280 °C, respectively. Perfection of the less ordered form into the better ordered form within the family is observed to occur in the vicinity of 270 °C; no evidence of transformation between and phases is identified.     

Electrode kinetics of antimony in alkaline solutions

The kinetics of the electro-oxidation and electro-reduction of Sb in alkaline solutions as well as the electrodeposition of Sb(III) on Sb have been studied. The rest potential follows the relation,E ₀=0.152–0.059 pHV is SHE which is the equation for the equilibrium potential for the redox reaction, 2Sb+60H^–=Sb₂O₃+3H₂O+6e^– The rates of anodic dissolution and electro-reduction can be expressed by the following empirical kinetic equations,i _a=6F¯k _a[OH^–]² exp 0.59FE/RT and ¦i _c=6F¯k _cexp–1.31FE/RT The empirical kinetic equation for electrodeposition of Sb (III) is ¦i_c¦=3F¯k_c[SbO ₂ ^– ] exp–0.454FE/RT Mechanisms are proposed to interpret the experimental results.Nomenclature b _a Anodic Tafel slope - b _c Cathodic Tafel slope - b _c Tafel slope for electrodeposition reaction - E Electrode potential - E ^e Equilibrium potential - E ₀ Rest potential - i _a Anodic current density - i _c Cathodic current density - i ₀ Exchange current density for Sb/Sb(III) reaction - i _{c, 28a} Sb(III) electrodeposition current density for Step 28a - i _c,21e Cathodic current density for Step 21 e - i_c Current density for Sb(III) electrodeposition - i₀ Exchange current density for Sb(III) electrodeposition - ¯k _a Anodic rate constant - ¯k _c Cathodic rate constant - ¯k _c,28a Electrodeposition rate constant for Step 28a - k _a,21e Anodic rate constant in Equation 22 - k _c,21e Cathodic rate constant in Equation 25 - ¯k_c Electrodeposition rate constant - ¯k_a,21e Anodic rate constant in Equation 23 - ¯k_c,21e Cathodic rate constant in Equation 26 - R Gas constant - T Absolute temperature - _a Anodic charge transfer coefficient - _c Cathodic charge transfer coefficient - _c Charge transfer coefficient for Sb (III) electrodeposition reaction - Symmetry factor