Effect of hydrotalcite on the physical properties and drug‐release behavior of nanocomposite hydrogels based on poly[acrylic acid‐co‐poly(ethylene glycol) methyl ether acrylate] gels

A series of nanocomposite hydrogels used for bioadhesive were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and intercalated hydrotalcite (HT) by photopolymerization. The microstructures of the intercalated HT and sample gels were identified by X‐ray diffraction (XRD). The results showed that the swelling ratio for these nanocomposite hydrogels increased with an increase in HT, but the gel strength and adhesive force for these gels decreased with an increase in HT. The XRD results indicated that the exfoliation of intercalated HT was achieved in the xerogels and swollen gels. Finally, the drug‐release behaviors for these gels were also examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 692–699, 2004     

Effect of bentonite on the physical properties and drug‐release behavior of poly(AA‐co‐PEGMEA)/bentonite nanocomposite hydrogels for mucoadhesive

A series of nanocomposite hydrogels for mucoadhesive were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and intercalated bentonite clay by photopolymerization. The microstructures were identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase of bentonite, whereas the gel strength and Young's modulus of the present gels increased with an increase of bentonite. However, the adhesive force of the present gels did not decrease with an increase of bentonite. XRD results indicated that the exfoliation of bentonite was achieved in the xerogels and swollen gels. Finally, the drug‐release behaviors for these gels were also assessed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2934–2941, 2004     

Effect of montmorillonite on the swelling behavior and drug‐release behavior of nanocomposite hydrogels

A series of nanocomposite hydrogels were prepared from various ratios of N‐isopropylacrylamide (NIPAAm) and organic montmorillonite (MMT). The influence of the extent of MMT in the NIPAAm/MMT nanocomposite hydrogels on the physical properties and drug‐release behavior was the main purpose of this study. The microstructure and morphology were identified by X‐ray diffraction (XRD) and scanning electronic microscopy (SEM). The results showed that the swelling ratios for these nanocomposite hydrogels decreased with increase in the content of MMT. The gel strength and Young's modulus of the gels also increased with increase in the content of MMT. XRD results indicated that the exfoliation of MMT was achieved in the swollen state. Finally, the drug‐release behavior for the gels was also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3652–3660, 2003     

Effect of intercalant content of mica on the various properties for the charged nanocomposite poly(N‐isopropyl acrylamide) hydrogels

In this study, we intend to adjust the charge properties of the poly(N‐isopropylacrylamide) [Poly(NIPAAm)] gel by using anionic clay and cationic monomer. Hence, two series of nanocomposite hydrogels bearing different charges were designed from NIPAAm, intercalated mica (IM) (NIM‐series) and NIPAAm, IM, trimethyl (acrylamido propyl) ammonium iodide (TMAAI) (NTIM‐series), respectively. The mica was first intercalated with different contents of intercalant, trimethyl (acrylamido propyl) ammonium chloride (TMAACl), based on the cationic exchange capacity (CEC) of mica. The effect of the CEC value of IM and IM content on the charge property, swelling behaviors, mechanical properties, and drug‐release behaviors of the present gels were investigated. Results showed that the negative charges for NIM series gels decrease with increase in CEC values of the IM (from ?11 to ?6 mV), the positive charges for NTIM series gels also decrease with increase in CEC values of the IM (from +36 to +18 mV). The swelling behaviors and mechanical properties for the NTIM gels were significantly enhanced by IM content and CEC values of the IM. The microstructures, morphologies, and drug‐release behaviors in these two series gels are also investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2277–2287, 2007     

Effect of hydrotalcite on the swelling and mechanical behaviors for the hybrid nanocomposite hydrogels based on gelatin and hydrotalcite

A series of hybrid nanocomposite hydrogels, based on gelatin and intercalated hydrotalcite (IHT), crosslinked with glutaraldehyde, was prepared in this study. The microstructures of the IHT and sample gels were identified by X‐ray diffraction (XRD). Swelling behaviors and physical properties of these hybrid gels were investigated. XRD results indicated that exfoliation of IHT was achieved in the hybrid nanocomposite gels. The results indicated that adding a small amount of IHT could effectively decrease the swelling ratio of the hybrid gels, but adding excess IHT could increase the swelling ratio of the nanocomposite hybrid gels. The crosslinking densities (ρ_x) of the present gels varied with IHT content and swelling ratio of the gels. The drug release behaviors of these gels were also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 500–507, 2006     

Effect of intercalated hydrotalcite on swelling and mechanical behavior for poly(acrylic acid‐co‐N‐isopropylacrylamide)/hydrotalcite nanocomposite hydrogels

A series of nanocomposite hydrogels were prepared from acrylic acid (AA), N‐isopropylacrylamide (NIPAAm), and intercalated hydrotalcite (IHT) by photopolymerization. The influence of the intercalating content of 2‐acrylamido‐2‐methyl propane sulfonic acid (AMPS) in HT on the swelling and mechanical properties for poly(AA‐co‐NIPAAm)/IHT nanocomposite hydrogels was investigated. The results showed that the higher the content of the AMPS‐HT was, the higher the swelling ratio of the gels and the higher the content of the intercalating agent was, the lower swelling ratio. It was also demonstrated that the swelling ratio of the gel was not affected by the counterion in HT. The gel strength and crosslinking density were not enhanced by adding AMPS‐HT into the gel composition, but the maximum effective crosslink density and shear modulus of the nanocomposite hydrogels were increased with an increase of the content of the intercalating agent in HT. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1572–1580, 2005     

Swelling and drug‐release behavior of the poly(AA‐co‐N‐vinyl pyrrolidone)/chitosan interpenetrating polymer network hydrogels

A series of novel hydrogels were prepared from acrylic acid (AA), N‐vinyl pyrrolidone (NVP), and chitosan by photopolymerization. The swelling behavior, gel strength, and drug release behavior of the poly(AA/NVP) copolymeric hydrogels and corresponding interpenetrating polymer network hydrogels were investigated. Results showed that the swelling ratios for the present hydrogels decreased with an increase of NVP content in the gel, but the gel strength increased with an increase of NVP content in the gel. Results also showed that the drug‐release behavior for the gels is related to the ionicity of drug and the swelling ratio of the gel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2135–2142, 2004     

Synthesis and characterization of poly(ethylene terephthalate) nanocomposites with organoclay

Poly(ethylene terephthalate) (PET)/montmorillonite (MMT) nanocomposites were prepared by solution intercalation method. The clay was organo‐modified with the intercalation agent cetylpyridinium chloride (CPC). Wide‐angle X‐ray diffraction (XRD) showed that the layers of MMT were intercalated by CPC. Four nanocomposites with organoclay contents of 1, 5, 10, and 15 wt % were prepared by solution blending. XRD showed that the interlayer spacing of organoclay in the nanocomposites depends on the amount of organoclay present. According to the results of differential scanning calorimetry (DSC) analysis, clay behaves as a nucleating agent and enhances the crystallization rate of PET. The maximum enhancement of crystallization rate for the nanocomposites was observed in those containing about 10 wt % organoclay within the studied range of 1–15 wt %. From thermogravimetric analysis (TGA), we found that the thermal stability of the nanocomposites was enhanced by the addition of 1–15 wt % organoclay. These nanocomposites showed high levels of dispersion without agglomeration of particles at low organoclay content (5 wt %). An agglomerated structure did form in the PET matrix at 15 wt % organoclay. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 140–145, 2004     

Chitosan modified MMT‐poly(AMPS) nanocomposite hydrogel: Heating effect on swelling and rheological behavior

Vulnerability of hydrogels against thermal circumstances may be substantially eliminated via incorporating nanoclay to prepare nanocomposite hydrogels. In this research, chitosan‐intercalated montmorillonite (ChitoMMT) was used as a bionanoclay to yield novel nanocomposite hydrogels based on 2‐acrylamido‐2‐methylpropanesulfonic acid. The bionanoclay is suitable especially for preparing biomaterials used in biomedical, food, and pharmaceutical applications, unlike conventional commercial nanoclays (alkyl ammonium‐intercalated MMT) which are not appropriate for bio‐applications due to toxicity of the intercalant particularly where the clay content is high. Two different crosslinkers (i.e., methylene bisacrylamide, and polyethyleneglycol dimethacrylate) were employed to synthesize the nanocomposites. The variations in swelling, rheological and thermal properties of the hydrogels were essentially attributed to thermally induced crosslink cleavage/formation depending upon the crosslinker nature. The nanocomposites comprised superior thermal properties in comparison with the clay‐free hydrogel counterpart. They can preserve substantially their swelling ability for longer heating periods. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of fluorinated hydrophobic monomer on the drug release behavior for the thermosensitive hydrogels

Three series of copolymeric gels based on N‐isopropylacrylamide (NIPAAm) and perfluoroalkyl methacrylate such as 2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate (OFPMA), 4,4,5,5,6,7,7,7‐octafluoro‐2‐hydroxy‐6‐(trifluoromethyl)heptyl methacrylate (OFHHMA), and 3,3,4,4,5,6,6,6‐octafluoro‐5‐(trifluoromethyl)hexyl methacrylate (OFHMA), were prepared by emulsion polymerization. The effect of perfluoroalkyl methacrylate and sodium lauryl sulfate (SLS), which can act as a surfactant and a pore‐forming agent, on the equilibrium swelling ratio and mechanical properties of the present hydrogels was investigated. Results show that hydrophobic monomers made the swelling ratio of the gel decrease and the mechanical property of the gel increase; however, SLS exhibits a contrary result. In addition, the effect of perfluoroalkyl methacrylate on the drug release behavior was also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4661–4667, 2006     

Intercalation and exfoliation behavior of epoxy resin/curing agent/montmorillonite nanocomposite

The epoxy resin/curing agent/montmorillonite nanocomposite was prepared by a casting and curing process. The intercalation and exfoliation behaviors of epoxy resin in the presence of organophilic montmorillonite were investigated by X‐ray diffraction (XRD) and dynamic mechanical thermal analysis (DMTA). For the diethylenetriamine curing agent, the intercalated nanocomposite was obtained; and the exfoliated nanocomposite would be formed for tung oil anhydride curing agent. The curing condition does not affect the resulting kind of composite, both intercalation or exfoliation. For intercalated nanocomposite, the glass transition temperature T_g, measured by DMTA and affected by the curing temperature of matrix epoxy resin is corresponded to that of epoxy resin without a gallery. The α′ peak of the loss tangent will disappear if adding montmorillonite into the composite. It was also found that the T_g of the exfoliated nanocomposite decreases with increasing montmorillonite loading. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 842–849, 2002; DOI 10.1002/app.10354     

Thermoreversible hydrogels X: Synthesis and swelling behavior of the (N‐isopropylacrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropyl sulfonate) copolymeric hydrogels

A series of thermosensitive hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and sodium‐2‐acrylamido‐2‐methylpropyl sulfonate (NaAMPS). Factors such as temperature and initial total monomer concentration and different pH solutions were investigated. Results indicated that the more the NaAMPS content in hydrogel system, the higher the swelling ratio and the gel transition temperature; the higher the initial monomer concentration, the lower the swelling ratio. The result also indicated that the NIPAAm/NaAMPS copolymeric hydrogels had different swelling ratios in various pH environments. The present gels showed a pH‐reversible property between pH 3 and pH 10 and thermoreversibility. The swelling ratios of copolymeric gels were lower in a strong alkaline environment because the gels were screened by counterions. Finally, the drug release behavior of these gels was also investigated in this article. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1760–1768, 2000     

Swelling behavior of poly(acrylamide)/clay nanocomposite hydrogels in acrylamide aqueous solution

The swelling behaviors of poly(acrylamide) (PAAm)/clay nanocomposite hydrogels (hereinafter abbreviated as NC gels) in acrylamide (AAm) aqueous solution have been investigated. As‐prepared PAAm/clay hydrogels (S‐M gels) were posttreated by immersing them in AAm aqueous solution. It was found that the swelling ratio of the NC gels increased greatly when the concentration of the solution is below a critical concentration (c*), whereas the gels were disintegrated in the solution when the concentration of the solution is above the c*. Some disc‐like particles were found in the AAm solution accompanying with the unusual swelling behaviors. This unusual swelling behavior is resulted from the change of network structure of the NC gels in AAm aqueous solution, which was further convinced by transmission electron microscopy and element analyses. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of nanocomposite hydrogels based on polyacrylamide for enhanced oil recovery applications

In the present work, attempts have been made to prepare nanocomposite type of hydrogels (NC gels) by crosslinking the polyacrylamide/montmorillonite (Na‐MMT) clay aqueous solutions with chromium (III). The X‐ray diffraction patterns of the NC gels exhibited a significant increase in d₀₀₁ spacing between the clay layers, indicating the formation of intercalated as well as exfoliated type of morphology. Exfoliation of the clay layers through out the gel network was found to be predominated, which evidences the high interaction between the polyacrylamide segments and montmorillonite layers. Gelation time as well as variation of viscoelastic parameters such as storage modulus (G′) of the gel network during gelation process at 75°C was studied and followed by rheomechanical spectroscopy (RMS). The NC gels prepared with lower crosslinker concentration showed higher strength and elastic modulus compared with the similar but unfilled polyacrylamide gel. This distinct characteristic of the NC gels yields a gel network structure with high resistance towards syneresis at high temperature in the presence of the oil reservoir formation water. The effects of the composition, such as clay content, crosslinker concentration, and also water salinity upon the gelation rate, gel strength as well as rate of syneresis have been investigated. To optimize the injectivity of the intercalated polyacrylamide solution before the onset of gelation with the gel strength of the final developed gel, sodium lactate was employed as retarder. This was found to be effective to balance these two characteristics of the NC gels, which are aimed to be used for water shut‐off and as profile modifier in enhanced oil recovery (EOR) process during water flooding process. The nanocomposite gels showed much more elasticity and extensibility at low crosslinker concentration compared with the similar but unfilled gel, which makes the NC gels suitable as an in‐depth profile modifier, and also as an oil displacing agent in the heterogeneous oil reservoir in chemical EOR. Effects of the clay content on the thermal stability of the gel network have also been investigated by thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) has been performed upon the NC‐gel samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2096–2103, 2006     

Thermoreversible hydrogels. XV. Swelling behaviors and drug release for thermoreversible hydrogels containing silane monomers

Three series of thermosensitive copolymeric hydrogels were prepared from [3‐(methacryloyloxy)propyl]trimethoxysilane (MPTMOS), [2‐(methacryloyloxy)ethoxy]trimethylsilane (METMS), and (methacryloyloxy)trimethylsilane (MTMS), referred to as the silane monomer, and N‐isopropylacrylamide (NIPAAm) by solution polymerization. The influence of the structures and amounts of silane monomers on the swelling and drug‐released behaviors were studied. The results showed that, because of the hydrophobicity of the silyl group, the more silane monomers in the copolymeric hydrogels the lower was the swelling ratio of the gels. The hydrophobicity of the silyl group affected the swelling mechanism, which resulted from the non‐Fickian diffusion for the gels. The copolymeric gels clearly exhibited gel transition temperatures. The copolymeric hydrogels could be applied to a drug‐release and drug‐delivery system. The delivery amount would approach a steady state after three cycle operations of delivery. The gels also showed an on–off switch behavior on drug release depending on the temperature, and the gels released more CV with the gels in a swollen state. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2523–2532, 2002     

Structure‐property and swelling behavior of electron beam irradiated poly(vinyl alcohol)/acrylamide/sodium montmorillonite clay composites

Composites based on poly(vinyl alcohol) (PVA), acrylamide monomer (AM) and sodium montmorillonite clay (MMT) were prepared, in the form of thin films, by solution casting. The PVA/AM/MMT composites films were then exposed to electron beam irradiation to form crosslinked network structure. The structure‐property behavior of PVA/AM/MMT hybrids was demonstrated by x‐ray diffraction (XRD), scanning electron microscopy, gel content, color intensity, thermogravimetric analysis (TGA) and swelling behavior in aqueous solutions. The results indicated that the introduction of MMT clay ratio up to 5% decreased the gel content of PVA/AM hydrogels. The color measurements indicated that the introduction of MMT clay ratio up to 5% was shown to affect the color intensity of composite films. It was found that both PVA/AM hydrogels and PVA/AM/MMT composites reached the equilibrium swelling state in water after four hours; however PVA/AM/MMT composites displayed higher swelling than PVA/AM hydrogels. However, the swelling of PVA/AM hydrogels or their composites at the equilibrium state increased with increasing temperature up to 60°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of compatibilizer on the layered silicate/ethylene vinyl acetate nanocomposite

Dispersion behavior of monmorillonite (MMT) is investigated in ethylene vinyl acetate (EVA)/MMT nanocomposite with various vinyl acetate content. Maleic anhydride (MAH) grafted polyethylenes with various MAH contents are used as a compatibilizer to enhance the dispersion of MMT. DMA and XRD studies indicate that an intercalated/exfoliated structure is obtained and vinyl acetate content and the concentration of PEMA play a critical role in EVA/MMT nanocomposite. Higher vinyl acetate content and concentration of grafted maleic anhydride result in better dispersion of MMT. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1057–1061, 2004     

Semi‐IPN carrageenan‐based nanocomposite hydrogels: Synthesis and swelling behavior

Inclusion of nano‐clays into hydrogels is an efficient approach to produce nanocomposite hydrogels. The introduction of nano‐clay into hydrogels causes an increase in water absorbency. In the present work, Nanocomposite hydrogels based on kappa‐carrageenan were synthesized using sodium montmorillonite as nano‐clay. Acrylamide and methylenebisacrylamide were used as monomer and crosslinker, respectively. The structure of nanocomposite hydrogels was investigated by XRD and SEM techniques. Swelling behavior of nanocomposite hydrogels was studied by varying clay and carrageenan contents as well as methylenebisacrylamide concentration. An optimum swelling capacity was achieved at 12% of sodium montmorilonite. The swollen nanocomposite hydrogels were used to study water retention capacity (WRC) under heating. The results revealed an increase in WRC due to inclusion of sodium montmorilonite clay. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electron beam synthesis and characterization of poly(vinyl alcohol)/montmorillonite nanocomposites

Poly(vinyl alcohol) (PVA)/montmorillonite clay (MMT) nanocomposites in the form of films were prepared under the effect of electron beam irradiation. The PVA/MMT nanocomposites gels were characterized by X‐ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and mechanical measurements. The study showed that the appropriate dose of electron beam irradiation to achieve homogeneous nanocomposites films and highest gel formation was 20 kGy. The introduction of MMT (up to 4 wt %) results in improvement in tensile strength, elongation at break, and thermal stability of the PVA matrix. In addition, the intercalation of PVA with the MMT clay leads to an impressive improved water resistance, indicating that the clay is well dispersed within the polymer matrix. Meanwhile, it was proved that the intercalation has no effect on the metal uptake capability of PVA as determined by a method based on the color measurements. XRD patterns and SEM micrographs suggest the coexistence of exfoliated intercalated MMT layers over the studied MMT contents. The DSC thermograms showed clearly that the intercalation of PVA polymer with these levels of MMT has no influence on the melting transitions; however, the glass transition temperature (T_g) for PVA was completely disappeared, even at low levels of MMT clay. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1129–1138, 2006     

Synthesis and dielectric properties of polystyrene‐clay nanocomposite materials

Polystyrene‐clay nanocomposite (PsCN) materials were synthesized and their properties of crystallinity, thermal behavior, and dielectric characteristics were investigated. A polymerizable cationic surfactant, [2‐(dimethylamino)ethyl]triphenylphonium bromide, was used for the intercalation of montmorillonite (MMT). The organophilic MMT was prepared by Na⁺‐exchanged MMT and ammonium cations of a cationic surfactant in an aqueous medium. Organophilic styrene monomers were intercalated into the interlayer regions of organophilic clay hosts followed by a free‐radical polymerization. Exfoliation to 2 wt % MMT in the polystyrene (PS) matrix was achieved as revealed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were also studied. The dielectric properties of PsCNs in the form of film with clay loading from 1.0 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 25–70°C. A decreased dielectric constant and low dielectric loss were observed for PsCN materials. The dielectric response at low frequency that originated from dipole orientation was suppressed due to the intercalation of clay materials. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1368–1373, 2004