Bone cell viability on methacrylic acid grafted and collagen immobilized porous poly(3‐hydroxybutrate‐co‐3‐hydroxyvalerate)

Porous poly(3‐hydroxybutrate‐co‐3‐hydroxyvalerate) (PHBV) film was prepared by solute leaching of salt/PHBV cast film. The surface chemistry of the PHBV membrane was modified by performing graft polymerization of methacrylic acid (MAA) on ozone treated porous PHBV film, followed by immobilization of type I collagen. The surface characteristics of the modified and nonmodified porous films were measured by water contact angle. The rat osteosarcoma cell line UMR‐106 osteoblast like cells were used as model cells to evaluate the cell viability on surfaces. The initial cell attachment, growth pattern, and proliferation as measured by MTT assay were used to evaluate the bone cell viability on the modified and nonmodified films. Among the PHBV films studied, the nonmodified porous PHBV and the porous PHBV film type I collagen dip coated showed no significant difference in cell attachment and proliferation, while the porous PHBV membrane that was collagen immobilized after MAA grafting showed considerable activity of osteoblast like cells. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1916–1921, 2005     

Photografting polymerization of polyacrylamide on poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) films. II. Wettability and crystallization behaviors of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)‐graft‐polyacrylamide films

The wettability and crystallization behaviors of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)‐graft‐polyacrylamide (PAM) films were studied. X‐ray photoelectron spectroscopy analyses illustrated that about 62 atom % of the total polar functionalities on the grafted film with 17% grafting percentage (GP) was amide groups. Wide‐angle X‐ray diffraction results suggest that grafted PAM induced defects in PHBV crystals and influenced their crystal structure. Differential scanning calorimetry (DSC) spectra showed the two melting regions, 60–90 and 145–170°C, of the imperfect PHBV crystals of the grafted films. Grafted PAM could suppress the recrystallization of PHBV, which was consistent with the polarizing optical microscopy results, in which the maximum PHBV spherulite diameter decreased from 350 μm for the PHBV film to 50 μm for the film with 53% GP. In addition, DSC studies revealed that the crystallinity of the grafted films decreased with increasing GP, which facilitated the diffusion of water into the films. The water contact angle of grafted films decreased and the water‐swelling percentage increased as GP went up. These results demonstrate the potential of PHBV‐g‐PAM for wettable surface constructs in tissue engineering applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Formulation of silver chloride/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (AgCl/PHBV) films for potential use in bone tissue engineering

Orthopedic implant failure due to bacterial infection has been a concern in bone tissue engineering. Here, we have formulated a composite made of biodegradable polymer, i.e., poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and silver chloride. Ag⁺ ions released from the AgCl/PHBV film can promote an aseptic environment by promoting inhibition of bacterial growth while maintaining bone cell growth, depending on AgCl loading. The objective of this study is to formulate AgCl/PHBV film(s) of varying composition so as to evaluate the dependence of AgCl loading in the film on antimicrobial activity and cytotoxicity. The release kinetics of silver ions from AgCl/PHBV film in aqueous and Dulbecco's Modified Eagle Medium showed similarity in the initial burst of ions during the first day of desorption followed by a gradual release of ions over extended time period. The antibacterial efficacy of AgCl/PHBV film against Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa was evaluated by microbiological assay, while cytotoxicity of the film toward MC3T3‐E1 cells was determined by MTT assay. For all compositions studied, a clear zone of inhibition around AgCl/PHBV film was noticed on a modified Kirby‐Bauer disk diffusion assay. We established that MC3T3‐E1 cell attachment on AgCl/PHBV film is strongly related to loading of AgCl in the film. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45162.     

Crosslinking of poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] using dicumyl peroxide as initiator

In order to modify poly [(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] (PHBV), the crosslinking of this copolymer was carried out at 160 °C using dicumyl peroxide (DCP) as the initiator. The torque of the PHBV melt showed an abrupt upturn when DCP was added. Appropriate values for the gel fraction and crosslink density were obtained when the DCP content was up to 1 wt% of the PHBV. According to the NMR spectroscopic data, the location of the free radical reaction was determined to be at the tertiary carbons in the PHBV chains. The melting point, crystallization temperature and crystallinity of PHBV decreased significantly with increasing DCP content. The effect of crosslinking on the melt viscosity of PHBV was confirmed as being positive. Moreover, the mechanical properties of PHBV were improved by curing with DCP. When 1 wt% DCP was used, the ultimate elongation of PHBV increased from 4 to 11 %. A preliminary biodegradation study confirmed the total biodegradability of crosslinked PHBV. Copyright © 2004 Society of Chemical Industry     

Crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/clay nanocomposites

The preparation and properties of nanocomposites, consisting of a poly(3‐Hydroxybutyrate‐co‐3‐hydroxyvalerate) and an organophilic clay are described. The effect of organophilic clay on the crystallization behavior of (PHBV) was studied. A differential scanning calorimeter (DSC) was used to monitor the energy of the crystallization process from the melt. During the crystallization process from the melt, the organophilic clay led to an increase in crystallization temperature (T_c) of PHBV compared with that for plain PHBV. During isothermal crystallization, dependence of the relative degree of crystallization on time was described by the Avrami equation. The addition of organophilic clay caused an increase in the overall crystallization rate of PHBV, but did not influence the mechanism of nucleation, and growth of the PHBV crystals and the increase caused by a small quantity of clay is move effective than that large one. The equilibrium melting temperature of PHBV was determined as 186°C. Analysis of kinetic data according to nucleation theories showed that the increase in crystallization rate of PHBV in the composite is due to the decrease in surface energy of the extremity surface. The mechanical test shows that the tensile strength of hybrid increased to 35.6 MPa, which is about 32% higher than that of the original PHBV with the incorporation of 3 wt % clay, and the tensile modulus was also increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 655–661, 2004     

Electrospinning of Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) nanofibers with feature surface microstructure

The development of surface microstructure with specific features in electrospun nanofibers has attracted more and more attention in recent years. In this article, a common biological polyester, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was electrospinning into nanofibers with “coral‐like” surface microstructure by a conventional‐electrospinning setup. The effect of the process parameters on the microstructure in electrospun nanofibers were investigated via a series of experiments. The formation mechanism of this feature structure and cytotoxicity assays of PHBV membrane were also discussed. The water contact angle of the electrospun PHBV membrane was higher than that of the PHBV cast film due to a very‐rough fiber surface including porous beads when PHBV was electrospun from the concentration of 4 wt %. Because of special hole shape and size distribution, the physical structure of surface of PHBV electrospun fibers offered it special properties, such as specific‐surface area, hydrophilic–hydrophobic properties, adhesion properties of cells and biological substances, etc. The demonstrated method of form coral structure would contribute to the areas such as filtration, sensor, tissue engineering scaffolds, and carriers of drugs or catalysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)‐based biocomposites reinforced with kenaf fibers

Biodegradable thermoplastic‐based composites reinforced with kenaf fibers were prepared and characterized. Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), produced by bacterial fermentation, was selected as polymeric matrix. To improve PHBV/fibers adhesion, low amount of a proper compatibilizing agent, obtained by grafting maleic anhydride onto PHBV, was added during matrix/fibers melt mixing (reactive blending). When compared with uncompatibilized composites, the presence of the compatibilizer induces a stronger interfacial adhesion and a more pronounced improvement of the mechanical properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Photografting polymerization of polyacrylamide on PHBV films (I)

Photografting polymerization of polyacrylamide (PAM) onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) films using benzophenone as photoinitiator was studied. The morphology and structure of the grafted PHBV film were characterized by Fourier transformed infrared spectroscopy (FTIR) with attenuated total reflectance (ATR) and scanning electron microscope (SEM) with energy dispersive X‐ray spectrometer (EDX). The grafting percentage and grafting efficiency of the grafted PHBV film went up with the increase of acrylamide concentration and irradiation time. It was observed that photografting polymerization of PAM was not only limited to the film surface, but also in situ occurred inside the film to form the pore microstructure. Sheep bone marrow stromal cell studies showed that MSCs cells attachment efficiency on the grafted PHBV films increased and cells grew well. These results demonstrated the potentiality of PAM‐photografting PHBV in medical applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104, 4088–4095, 2007     

Effect of graft modification with poly(N‐vinylpyrrolidone) on thermal and mechanical properties of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. The effect of graft modification with PVP on the thermal and mechanical properties of PHBV was investigated. The thermal stability of grafted PHBV was remarkably improved while the melting temperature (T_m) was almost not affected by graft modification. The isothermal crystallization behavior of samples was observed by polarized optical microscopy and the results showed that the spherulitic radial growth rates (G) of grafted PHBV at the same crystallization temperature (T_c) decreased with increasing graft yield (graft%) of samples. Analysis of isothermal crystallization kinetics showed that both the surface free energy (σ_e) and the work of chain‐folding per molecular fold (q) of grafted PHBV increased with increasing graft%, implying that the chains of grafted PHBV are less flexible than ungrafted PHBV. This conclusion was in agreement with the mechanical testing results. The Young's modulus of grafted PHBV increased while the elongation decreased with increasing graft%. The hydrophilicity of polymer films was also investigated by the water contact angle measurement and the results revealed that the hydrophilicity of grafted PHBV was enhanced. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Fabrication of honeycomb‐structured porous films from poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) via the breath figures method

Formation of porous films from poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) using the breath figures (BF) method was investigated by evaporating solutions in chloroform in humid air and examining film structure using optical and scanning electron microscopy (SEM). BF films were successfully fabricated from PHB (M_w = 486,000 g/mol) and displayed hexagonal arrays of pores, which varied in diameter (D = 7–2 μm) with solution concentrations (0.5–2.00%). SEM of fractured films also showed subsurface closed nano‐pores (D = 500–700 nm). BF films cast from PHBV (5% HV) formed arrays with smaller pores and apparent surface defects. Differential scanning calorimetry showed that porous PHB and PHBV films produced using the BF method were more crystalline than nonporous solvent cast films of PHB and PHBV. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Bone morphogenetic protein‐2 immobilization on porous PCL‐BCP‐Col composite scaffolds for bone tissue engineering

The objective of this study was to develop novel porous composite scaffolds for bone tissue engineering through surface modification of polycaprolactone–biphasic calcium phosphate‐based composites (PCL–BCP). PCL–BCP composites were first fabricated with salt‐leaching method followed by aminolysis. Layer by layer (LBL) technique was then used to immobilize collagen (Col) and bone morphogenetic protein (BMP‐2) on PCL–BCP scaffolds to develop PCL–BCP–Col–BMP‐2 composite scaffold. The morphology of the composite was examined by scanning electron microscopy (SEM). The efficiency of grafting of Col and BMP‐2 on composite scaffold was measured by X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Both XPS and FTIR confirmed that Col and BMP‐2 were successfully immobilized into PCL–BCP composites. MC3TC3‐E1 preosteoblasts cells were cultivated on composites to determine the effect of Col and BMP‐2 immobilization on cell viability and proliferation. PCL–BCP–Col–BMP‐2 showed more cell attachment, cell viability, and proliferation bone factors compared to PCL–BCP‐Col composites. In addition, in vivo bone formation study using rat models showed that PCL–BCP–Col–BMP‐2 composites had better bone formation than PCL–BCP‐Col scaffold in critical size defect with 4 weeks of duration. These results suggest that PCL–BCP–Col–BMP‐2 composites can enhance bone regeneration in critical size defect in a rat model with 4 weeks of duration. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45186.     

Effect of poly(propylene carbonate) on the crystallization and melting behavior of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)

The crystallization and melting behavior of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate) (PHBV) and a 30/70 (w/w) PHBV/poly(propylene carbonate) (PPC) blend was investigated with differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR). The transesterification reaction between PHBV and PPC was detected in the melt‐blending process. The interaction between the two macromolecules was confirmed by means of FTIR analysis. During the crystallization process from the melt, the crystallization temperature of the PHBV/PPC blend decreased about 8°C, the melting temperature was depressed by 4°C, and the degree of crystallinity of PHBV in the blend decreased about 9.4%; this was calculated through a comparison of the DSC heating traces for the blend and pure PHBV. These results indicated that imperfect crystals of PHBV formed, crystallization was inhibited, and the crystallization ability of PHBV was weakened in the blend. The equilibrium melting temperatures of PHBV and the 30/70 PHBV/PPC blend isothermally crystallized were 187.1 and 179°C, respectively. The isothermal crystallization kinetics were also studied. The fold surface free energy of the developing crystals of PHBV isothermally crystallized from the melt decreased; however, a depression in the relative degree of crystallization, a reduction of the linear growth rate of the spherulites, and decreases in the equilibrium melting temperature and crystallization capability of PHBV were detected with the addition of PPC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2514–2521, 2004     

Fast crystallization of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) with talc and boron nitride as nucleating agents

The crystallization behavior of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) induced by two kinds of nucleating agents, boron nitride (BN) and talc, was investigated by differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both BN and talc have good nucleating ability in the crystallization of PHB and PHBV. From these results, combined with molecular weight measurement by gel permeation chromatography, the mechanism of nucleation by BN and talc in the crystallization of PHB and PHBV has been proposed. BN acts as a nucleating agent itself and initiates nucleation in the crystallization of PHB and PHBV. Talc acts in a different way. It reacts as a chemical reagent with the molten chains of PHB/PHBV, while the reaction product acts as the true nucleating agent, which lowers the crystallization barriers of PHB and PHBV. ¹H NMR spectroscopy provides evidence for the reaction between PHB and talc and supports the proposed nucleation mechanism. Copyright © 2005 Society of Chemical Industry     

Comparison of covalent and noncovalent interactions of carbon nanotubes on the crystallization behavior and thermal properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

In this study, multiwalled carbon nanotubes (MWCNTs) were dispersed into a poly(3‐hydroxybutyrate‐co?3‐hydroxyvalerate) (PHBV) matrix, in which PHBV was either covalently attached to the nanotubes through an esterification reaction between the carboxylic groups of functionalized MWCNTs and the hydroxyl groups of PHBV with toluene diisocyanate as a coupling agent or physically mixed to result in only noncovalent interactions. The structure, crystallization behavior, and thermal properties of the resulting nanocomposites were studied. We found that the crystallization of PHBV grafted onto the MWCNTs (PHBV‐g‐MWCNTs) was markedly hindered and exhibited an exothermic peak caused by cold crystallization, whereas the nonisothermal crystallization of PHBV was enhanced because a heterogeneous nucleation effect appeared in the PHBV/MWCNTs. Moreover, the maximum decomposition temperature of the PHBV‐g‐MWCNTs was improved by about 14.4°C compared with that of the PHBV/MWCNTs and by about 23.7°C compared with that of the original PHBV. Furthermore, the PHBV‐g‐MWCNTs exhibited the wider melt‐processing window than the PHBV/MWCNTs and original PHBV. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4299–4307, 2013     

Synthesis and photo‐ and biodegradabilities of poly[(hydroxybutyrate‐co‐hydroxyvalerate)‐ g‐phenyl vinyl ketone]

The graft copolymer, poly[(hydroxybutyrate‐co‐hydroxyvalerate)‐g‐phenyl vinyl ketone] [P(HBV‐g‐PVK)], was synthesized by graft polymerization of phenyl vinyl ketone (PVK) onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) under nitrogen atmosphere using benzoyl peroxide. The structure of P(HBV‐g‐PVK) was identified by Fourier transform IR and ¹H‐NMR spectra. The effects of weight ratio of PVK to PHBV in feed, initiator concentration, reaction time, and reaction temperature on the grafting ratio and grafting efficiency were investigated. The thermal decomposition temperature of P(HBV‐g‐PVK) was 272°C. The tensile strengths of P(HBV‐g‐PVK) after photo‐ or biodegradation were significantly decreased due to degradation by UV irradiation or Aspergillus niger. The value of color difference (ΔE) of P(HBV‐g‐PVK) was greater than that of PHBV. The film surfaces of P(HBV‐g‐PVK) treated with UV irradiation and Aspergillus niger showed many pits as compared with the untreated P(HBV‐g‐PVK). It has been found that the photo‐ and biodegradabilities of P(HBV‐g‐PVK) was excellent. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1432–1439, 1999     

Compatibility of poly(butadiene‐co‐acrylonitrile) with poly(L‐lactide) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(L ‐lactide) (PLLA) and poly(3‐hydrobutyrate‐co‐3‐hydroxyvalerate) (PHBV) were blended with poly(butadiene‐co‐acrylonitrile) (NBR). Both PLLA/NBR and PHBV/NBR blends exhibited higher tensile properties as the content of acrylonitrile unit (AN) of NBR increased from 22 to 50 wt %. However, two separate glass transition temperatures (T_g) appeared in PLLA/NBR blends irrespective of the content of NBR, revealing that PLLA was incompatible with NBR. In contrast, a single T_g, which shifted along with the blend composition, was observed for PHBV/NBR50 blends. Moreover NBR50 suppressed the crystallization of PHBV, indicating that PHBV was compatible with NBR50. Decrease of both elongation modulus and stress at maximum load was less significant and increase of elongation at break was more pronounced in PHBV/NBR50 blends than in PLLA/NBR50 blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3508–3513, 2004     

Influence of hydroxyvalerate composition of polyhydroxy butyrate valerate (PHBV) copolymer on bone cell viability and in vitro degradation

The objective of this study was to elucidate the role of hydroxyvalerate (HV) composition in polyhydroxy butyrate valerate (PHBV) copolymer film on the degradation of copolymer and osteoblastic cell activity. Degradation was studied by monitoring time‐dependent changes in mass and chemical composition of the macroporous films. The mass loss of PHBV film upon 19 weeks of exposure to pH 7.4 phosphate buffer medium was found to range from 2.8% to 9.2% with a strong dependence on the original composition of the copolyester film and morphology. Tapping mode atomic force microscopy (TMAFM) was used to examine the roughness change of polyester films due to exposure to buffer medium. Chemical analysis of the degraded film was carried out using NMR to aid in the interpretation of the mass loss and TMAFM data. The NMR results showed a significant decrease in the mol % of HV content in the degraded PHBV film. Additionally, we established that UMR‐106 cell proliferation on macroporous PHBV matrix is minimally enhanced by the HV content of PHBV copolymer. Information provided by this study can be used in the selection of appropriate PHBV copolymer for clinical use where the biopolymer needs to remain physically intact and chemically unchanged during the intended period of biomedical application. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of nucleating agents on the crystallization of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

The effect of nucleating agents on the crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was studied. A differential scanning calorimeter was used to monitor the energy of the crystallization process from the melt and melting behavior. During the crystallization process from the melt, nucleating agent led to an increase in crystallization temperature (T_c) of PHBV compared with that for plain PHBV (without nucleating agent). The melting temperature of PHBV changed little with addition of nucleating agent. However, the areas of two melting peaks changed considerably with added nucleating agent. During isothermal crystallization, dependence of the relative degree of crystallization on time was described by the Avrami equation. The addition of nucleating agent caused an increase in the overall crystallization rate of PHBV, but did not influence the mechanism of nucleation and growth of the PHB crystals. The equilibrium melting temperature of PHBV was determined as 187°C. Analysis of kinetic data according to nucleation theories showed that the increase in crystallization rate of PHBV in the composite is due to the decrease in surface energy of the extremity surface. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2145–2152, 2002     

Thermal analysis of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) irradiated under vacuum

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was irradiated by ⁶⁰Co γ‐rays (doses of 50, 100 and 200 kGy) under vacuum. The thermal analysis of control and irradiated PHBV, under vacuum was carried out by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile properties of control and irradiated PHBV were examined by using an Instron tensile testing machine. In the thermal degradation of control and irradiated PHBV, a one‐step weight loss was observed. The derivative thermogravimetric curves of control and irradiated PHBV confirmed only one weight‐loss step change. The onset degradation temperature (T_o) and the temperature of maximum weight‐loss rate (T_p) of control and irradiated PHBV were in line with the heating rate (°C min^?1). T_o and T_P of PHBV decreased with increasing radiation dose at the same heating rate. The DSC results showed that ⁶⁰Co γ‐radiation significantly affected the thermal properties of PHBV. With increasing radiation dose, the melting temperature (T_m) of PHBV shifted to a lower value, due to the decrease in crystal size. The tensile strength and fracture strain of the irradiated PHBV decreased, hence indicating an increased brittleness. Copyright © 2004 Society of Chemical Industry     

Thermal degradation of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in drying treatment

This study examines the isothermal treatment of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) powders and films. The PHB and PHBV crystallinities were determined using X‐ray diffractometry, and shown to increase with temperature (130–150°C) and then decreased from 55% to 45% at 180°C. The crystal morphology of crystal planes (101) and (111) became sharp at a high temperature. The weight average molecular weight (M_w) of PHB decreased from 1,028,000 to 41,800 g/mol when heated at 180°C for 30 min. The molecular weight of PHB decreased more rapidly than that of PHBV with time. No peak signal was observed in gel permeation chromatography after heating at 150°C because the solubility of PHB changed with crystallinity. The thermal behaviors of PHB and PHBV were analyzed by differential scanning calorimetry and thermogravimetric analysis. The roughness, contact angle, and surface morphology of PHB and PHBV films were also measured to determine the surface properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3659–3667, 2013