Influences of cerium on structure and catalytic performance of n-heptane hydroisomerization of Ni-HPW/MCM-48

By means of X-ray diffraction(XRD), N2 adsorption-desorption, Fourier transform infrared spectroscopy(FT-IR), scanning electron microscopy(SEM), NH3-temperature(NH3-TPD), Py-infrared(Py-IR) and thermogravimetry-differential scanning calorimetry(TG/DTA) techniques, the influences of Ce on the structure, acidity, stability and hydroisomerization performance of Ni-HPW/MCM-48 and Ni-HPW/Ce-MCM-48 catalysts were studied. The results showed that introduction of appropriate content of Ce into MCM-48 could improve the crystallinity, acidity and stability of mesoporous silica. The acidity and stability of the Ni-HPW/Ce-MCM-48 catalyst was also increased. Besides, the catalytic performance of the Ni-HPW/Ce-MCM-48 catalyst for n-heptane hydroisomerization was promoted. The conversion and selectivity of the Ni-HPW/Ce-MCM-48 catalyst reached 41% and 91% respectively at the preparation conditions of 4 wt.% Ni, 20 wt.% HPW, 0.03 Ce/Si molar ratio.     

Synthesis of Ln-doped MCM-41 mesoporous materials and their catalytic performance in oxidation of styrene

Using cetyl-trimethyl-ammonium bromide （CTMAB） as the template agent and tetraethylorthosilicate （TEOS） as the silica source, the MCM-41 mesoporous materials were synthesized with La or Ce incorporated in the framework under hydrothermal conditions. The structure and the state of La or Ce were investigated through the analyses of XRD, nitrogen adsorption-desorption, FT-IR, and UV-Vis. XRD and N2 adsorption-desorption results showed that Ln-MCM-41 exhibited the loss of the lattice ordering of the MCM-41 construct, and larger unit cell parameter and pore diameter than pure silica MCM-41. The FT-IR and UV-Vis results indicated the presence of isolated tetra-coordinated La or Ce ions in the framework and other Ln species dispersed highly on the Ln-MCM-41 surface simultaneously. Furthermore, their catalytic behaviors in the oxidation of styrene were studied using H2O2 as the oxidant. The La-MCM-41 catalysts exhibited high reactivity and the reactivity increased with the increase of the La content in the La-MCM-41 samples. On the contrary, Ce-MCM-41 catalysts showed low reactivity in the oxidation of styrene and the conversion of styrene decreased with the increase of the Ce content in the Ce-MCM-41 samples.     

Preparation of Au/CeO2 catalyst and its catalytic performance for HCHO oxidation

Aqueous precipitation and deposition-precipitation method were used to prepare CeO2 supports and Au/CeO2 catalysts, respectively. The effect of preparation condition of support on the catalyst activity was investigated. The catalytic combustion of HCHO was considered as the probe reaction for comparing the catalyst activity. The BET, X-ray diffraction, X-ray photoelectron spectroscopy （XPS）, and reduction （TPR） were carried out to analyze the influence factor on the catalysts activity. The results showed that the addition of dispersant and use of microwave in the support preparation procedure could be beneficial for enhancing the interaction of supports and gold species and thus improved the catalytic activity. The total conversion temperature for HCHO was 146 ℃ over AC400. With the modification during supports preparation process, the catalytic activity increased with total conversion temperature decreasing to 98 ℃. The results of XPS indicated that Au^0 and Au^＋1 species coexisted in these catalysts and the activity of catalyst correlated with Au^＋1/Au^0 ratio. Temperature-programmed reduction results demonstrated that the reduction peak appeared between 100-170 ℃ with the inducing of gold. The dependence of activity on the reduction peak temperature implied that ionic gold was catalytic activity component for HCHO oxidation.     

Synthesis of La_xK_(1–x)CoO_3 nanorod and their catalytic performances for CO oxidation

A series of Lax K1–x CoO3 nanorod oxides with perovskite structure were synthesized by sol-gel method using polyvinyl alcohol(PVA) as additive.These perovskite-type complex oxide catalysts were characterized by the techniques of X-ray diffraction(XRD),infrared(IR),Brumauer-Emmett-Teller(BET) and scanning electron microscopy(SEM).And the results showed that nanorods of La1–x Kx CoO3 perovskite-type complex oxides were fabricated by sol-gel method when the mass concentration of PVA was 4% and the calcined temperature kept at 700 ℃ for 4 h.The catalytic results of CO oxidation showed that the Lax K1–x CoO3 catalysts had high activity.LaCoO3 nanorods exposed more {110} plane than LaCoO3 nanoparticles,which was beneficial to the catalytic oxidation of CO.LaCoO3 nanorods had the best catalytic performance for the oxidation of CO.At 200 oC,the CO conversion could reach 100%.     

Modified-EISA synthesis of mesoporous high surface area CeO_2 and catalytic property for CO oxidation

Mesoporous CeO2 particles with high surface area were synthesized using a modified evaporation-induced self assembly(EISA) method which combined citric acid as complexing agent.As-prepared powder and further thermal treatment samples were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),selected area electron diffraction(SAED),Fourier transform infrared spectrometer(FTIR),thermogravimetry and differential thermal analysis(TG-DTA),Brunauer-Emmett-Teller(BET) and Barrett-Joyner-Ha...     

Synthesis of mesoporous CeO2-MnOx binary oxides and their catalytic performances for CO oxidation

Mesoporous CeO2-MnOx binary oxides with different Mn/Ce molar ratios were prepared by hydrothermal synthesis and characterized by scanning electron microscopy （SEM）, N2 sorption, X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and H2 temperature-programmed reduction （H2-TPR）. The characterization results indicated that the CeO2-MnOx catalysts exhibited flower-like microspheres with high specific surface areas, and partial Mn cations could be incorporated into CeO2 lattice to form solid solution. The CeO2-MnOx catalysts showed better catalytic activity for CO oxidation than that prepared by the coprecipitation method. Furthermore, the CeO2-MnOx catalyst with Mn/Ce molar ratio of 1 in the synthesis gel （Ce-Mn-1） exhibited the best catalytic activity, over which the conversion of CO could achieve 90% at 135 ℃. This was ascribed to presence of more Mn species with higher oxida- tion state on the surface and the better reducibility over the Ce-Mn-I catalyst than other CeO2-MnOx catalysts.     

Synthesis and Characterization of Mesoporous Materials MCM-41 Incorporated by Yttrium, Neodymium and Samarium

Synthesis and Characterization of Mesoporous Materials MCM-41 Incorporated by Yttrium, Neodymium and Samarium     

Synthesis and Characterization of Mesoporous Materials MCM-41 Incorporated by Yttrium, Neodymium and Samarium

Zeolitemolecularsieves,withtheuniformchan nelstructureandshapeselectiveproperty,arewidely usedascatalystsinindustriesofoil refining,petro chemicals,fine chemicalsandsoon.However,the poresizesofzeolitemolecularsievesusuallyaresmall erthan2nm,itgreatlypreve…     

Low-temperature catalytic oxidation of NO over Mn-Ce-O_x catalyst

A series of manganese-cerium oxide catalysts were prepared by different methods and used for low-temperature catalytic oxidation of NO in the presence of excess O2.Their surface properties were evaluated by means of BET and were characterized by using scanning electron microscopy(SEM) and X-ray diffractometer(XRD).The activity test of Mn-Ce-Ox catalysts showed that addition of Ce enhanced the activities of NO oxidation.The most active catalysts with a molar Ce/(Mn+Ce) ratio of 0.3 were prepared by co-precipitation method.The results showed that NO conversion reached 60% at 150 °C with a high space velocity of 50902 h-1.The effect of doping different rare earth oxides was also investigated and the addition of small amount of Ce not only increased the surface area of MnOx but also enhanced the dispersion of Mn species in the catalyst shown by BET,SEM and XRD.     

Synthesis and characterization of aluminum and AI/REE pillared clays and supported palladium catalysts for benzene oxidation

Volatile organic compounds (VOCs) are considered as a major pollutant in indoor and outdoor air.More stringent environmental regulations have been implemented in order to reduce the VOC emissions.One of the techniques available for destructive removal of VOCs is catalytic oxidation.In the present work,Al/Rare Earths (REE: Y,Ce,La,Pr and Nd) pillared clays (PILCs) were used to support 0.2 wt.% of palladium for the complete oxidation of low concentration of benzene.The supports and catalysts were characterized by XRD,N2 adsorp-tion/desorption,FTIR spectroscopy,HRTEM and H2-TPR techniques.The results indicated that after Al and Al/REE pillaring,the basal spac-ing,SBET,Amic and Vmic of Al and AlREE-PILC had a considerable increase compared with those of Na-mmt.Activity tests of deep oxidation of benzene showed that the catalytic activity of Pd catalysts supported on Al and AlREE-PILC were much higher than that on initial clays,which was due to the fact that optimized structure of PILCs,such as large basal spacing,high SBET and porosity,improved Pd dispersion and increased the active sites of Pd.Especially for Pd/AlCe-PILC,the temperature of complete oxidation was about 280 oC,exhibiting the highest catalytic activity.     

Preparation of hierarchical layer-stacking Mn-Ce composite oxide for catalytic total oxidation of VOCs

Hierarchical layer-stacking Mn-Ce composite oxide with mesoporous structure was firstly prepared by a simple precipitation/decomposition procedure with oxalate precursor and the complete catalytic oxidation of VOCs(benzene, toluene and ethyl acetate) were examined. The Mn-Ce oxalate precursor was obtained from metal salt and oxalic acid without any additives. The resulting materials were characterized by X-ray diffraction(XRD), Brunauer-Emmett-Teller(BET), scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDX), hydrogen temperature programmed reduction(H2-TPR) and X-ray photoelectron spectroscopy(XPS). Compared with Mn-Ce composite oxide synthesized through a traditional method(Na2CO3 route), the hierarchical layer-stacking Mn-Ce composite oxide exhibited higher catalytic activity in the complete oxidation of volatile organic compounds(VOCs). By means of testing, the data revealed that the hierarchical layer-stacking Mn-Ce composite oxide possessed superior physiochemical properties such as good low-temperature reducibility, high manganese oxidation state and rich adsorbed surface oxygen species which resulted in the enhancement of catalytic abilities.     

Synthesis and characterization of aluminum and Al/REE pillared clays and supported palladium catalysts for benzene oxidation

Volatile organic compounds (VOCs) are considered as a major pollutant in indoor and outdoor air.More stringent environmental regulations have been implemented in order to reduce the VOC emissions.One of the techniques available for destructive removal of VOCs is catalytic oxidation.In the present work,Al/Rare Earths (REE: Y,Ce,La,Pr and Nd) pillared clays (PILCs) were used to support 0.2 wt.% of palladium for the complete oxidation of low concentration of benzene.The supports and catalysts were characterize...     

MCM-41 supported nano-sized CuO-CeO_2 for catalytic combustion of chlorobenzene

In this paper,MCM-41 was synthesized by a soft template technique and MCM-41 supported CuO-CeO_2 nano-sized catalysts with different Cu/Ce molar ratios were prepared by a deposition-precipitation method.N_2 adsorption,HRTEM-EDS,H_2-TPR,XPS characterization,as well as catalytic activity and durability tests for the catalytic combustion of chlorobenzene(CB) were conducted to explore the relationship between the structure and catalytic performance of the catalysts.It is revealed that cuCe(6:1)/MCM-41 has the highest activity and can completely catalyze the degradation of CB at 260℃.The reasons for the high activity of the catalysts are as follows:MCM-41,a type of mesoporous material which has large pore size and large specific surface area,is suitable as a catalyst carrier.The average diameter of nano-sized CuO and CeO_2 particles is about 3-5 nm and adding CeO_2 improves the dispersion of active component CuO,which are highly and evenly dispersed on the surface of MCM-41.Characterization results also explain why MCM-41 supported CuO-CeO_2 with appropriate proportion can highly enhance the catalytic activity.The reason is that CeO_2 acting as an oxygen-rich material can improve the mobility of oxygen species through continuous redox between Ce~(4+)and Ce~(3+),and improve the catalytic performance of CuO for CB combustion.Besides,CuCe(6:1)/MCM-41 also displays good durability for CB combustion,both in the humid condition and in the presence of benzene,making it a promising catalytic material for the elimination of chlorinated VOCs.     

Chemical interaction of Ce-Fe mixed oxides for methane selective oxidation

Chemical interaction of Ce-Fe mixed oxides was investigated in methane selective oxidation via methane temperature programmed reduction and methane isothermal reaction tests over Ce-Fe oxygen carriers. In methane temperature programmed reduction test, Ce-Fe oxide behaved complete oxidation at the lower temperature and selective oxidation at higher temperatures. Ce-Fe mixed oxides with the Fe content in the range of 0.1–0.5 was able to produce syngas with high selectivity in high-temperature range(800–900 °C), and a higher Fe amount over 0.5 seemed to depress the CO formation. In isothermal reaction, complete oxidation occurred at beginning following with selective oxidation later. Ce1–xFexO2–δ oxygen carriers(x≤0.5) were proved to be suitable for the selective oxidation of methane. Ce-Fe mixed oxides had the well-pleasing reducibility with high oxygen releasing rate and CO selectivity due to the interaction between Ce and Fe species. Strong chemical interaction of Ce-Fe mixed oxides originated from both Fe*activated CeO2 and Ce3+ activated iron oxides(FeOm), and those chemical interaction greatly enhanced the oxygen mobility and selectivity.     

Pseudo core-shell LaCoO_3@MgO perovskite oxides for high performance methane catalytic oxidation

Magnesia modified LaCoO_3 was prepared by a facile one-step sol-gel method and used for removal of dilute methane.Compared with the conventional doping technique,the obtained LaCoO_3@MgO-x exhibits pseudo core-shell structure and shows superior catalytic activity.The methane conversion exceeds90% at 532℃ on LaCoO_3@MgO-0.1,while only 60% of methane is conversed using the doped perovskite LaCo_(0.9)Mg_(0.1)O_3.The high catalytic performance of LaCoO_3@MgO-0.1 is mainly attributed to the adjustment of surface acid-base properties by the MgO shell structure.According to density functional theory(DFT) calculation,the methane is more likely to be adsorbed and cracked on LaCoO_3@MgO-0.1.The in situ DRIFTS shows that CH_3-O-CH_3 intermediate specie is formed.The pseudo core-shell structure also enhances the stability and the LaCoO_3@MgO-0.1 maintains high activity after working for 100 h.The above results demonstrate that surface modification by magnesia is an effective strategy for improving LaCoO_3 catalytic performance.     

负载型纳米金催化剂的合成、表征及性能研究

以SiO2和纳米Au颗粒为原料,采用自组装方法合成了负载型金催化剂。应用傅立叶变换红外光谱(FT-IR)、X射线能谱(EDS)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)及原子吸收光谱(AAS)等对样品进行了表征。将该催化剂用于空气氧化环己烷反应的实验结果显示,其不仅具有较高的催化活性和稳定性,而且经简单处理即可重复使用多次。     

Controllable synthesis of argentum decorated CuOx@CeO2 catalyst and its highly efficient performance for soot oxidation

In this paper, CuO_x@Ag/CeO₂ catalysts were synthesized by simple wet-chemical method and equal volume impregnation method. The obtained catalysts were subjected to soot temperature programmed oxidation (soot-TPO) activity tests and were further characterized by various techniques such as X-ray diffraction (XRD), transmission electron microscopy/high-resolution transmission electron microscopy (TEM/HR-TEM), N₂ physisorption, X-ray photoelectron spectroscopy (XPS) and H₂-temperature programmed reduction (H₂-TPR). The results show that CuO_x@Ag/CeO₂ synthesized presents well controlled core-shell structures, with nano-cube like Cu₂O as the core and Ag decorated polycrystalline CeO₂ grafting layers as the shell. Such core-shell structured CuO_x@Ag/CeO₂ can successfully construct a secondary oxygen delivery channel (CuO_x → CeO₂ → Ag) to effectively transfer bulk oxygen of the catalyst to the soot, resulting in its excellent soot oxidation activity compared to CuO_x@CeO₂. The potential benefiting effect by Ag introduction over Cu@Ag/Ce can be concluded as: (i) pumping lattice oxygen and accelerating gaseous O₂ dissociation to generate significantly increased active surface oxygen content; (ii) modulating a moderate surface oxygen vacancies concentration to maintain more highly active O₂^– species.     

Synthesis of lathanum or La-B doped KIT-6 mesoporous materials and their application in the catalytic oxidation of styrene

La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelectron spectroscopy(XPS) and ICP-AES.The catalytic performance for the oxidation of styrene by hydrogen peroxide,tert-butyl hydroperoxide or oxygen was investigated.The results showed that the introduction of heteroatoms did not destroy the mesostructure of KIT-6 with cubic Ia3d space group.La or ...     

Removal of ammonia from aqueous solutions by catalytic oxidation with copper-based rare earth composite metal materials: catalytic performance, characterization, and cytotoxicity evaluation

Ammonia (NH3) has an important use in the chemical industry and is widely found in industrial wastewater. For this investigation of copper-based rare earth composite metal materials, aqueous solutions containing 400 mg/L of ammonia were oxidized in a batch-bed reac-tor with a catalyst prepared by the co-precipitation of copper nitrate, lanthanum nitrate and cerium nitrate. Barely any of the dissolved ammo-nia was removed by wet oxidation without a catalyst, but about 88% of the ammonia was reduced during we...     

Preparation and characterization of nano-rare earth composite materials:application in selectivity catalytic oxidation of ammonia and its cytotoxicity study

The manufacture,physical characterization,environmental applications and cytotoxicity properties of nanocomposites consisting of CuO/CeO2 nano-rare earth composite materials prepared using the coprecipitation method at molar ratio of 6:4 with aqueous solutions of copper nitrate and cerium nitrate were reported.The performance of the selective catalytic oxidation of ammonia to N2(NH3-SCO) over a CuO/CeO2 nano-rare earth composite materials in a tubular fixed-bed reactor(TFBR) at temperatures from 423 to 673 K in the presence of oxygen was elucidated.The catalytic redox behavior was determined by cyclic voltammetry(CV).The nanocomposite particles were characterized by TEM,with a tiny particle size around 10 nm with high dispersion phenomena.Further,cell cytotoxicity and the percentage cell survival were determined by using 3-(4,5-dimethylthiazol-2-yl)-5(3-carboxymethoxyphenol)-2-(4-sulfophenyl)-2H-tetra-zolium(MTS) assay on human lung MRC-5 cell line.Experimental results showed that no apparent cytotoxicity was observed when the MRC-5 was exposed to the CuO/CeO2 nanocomposite materials.