Stable and Metastable Equilibria in the Systems Y2O2-Al2O3, and Gd2O3-Fe2O3

The phase equilibrium relations in the systems Y₂O₃-Al₂O₃ and Gd₂O₃-Fe₂O₃ were examined. Each system has two stable binary compounds. A 3:s molar ratio garnet-type compound exists in both systems. The 1:1 distorted perovskite structure is stable in the system Gd₂O₃-Fe₂O₃ but only metastable in the system Y₂O₃-AI₂O₃. This interesting example of metastable formation and persistence of a compound with ions of high Z/r values explains the discrepancies in the literature on the structure of the composition YA1O₃. A new 2:1 molar ratio cubic phase has been found in the system Y₂O₃-A1₂O₃. Since silicon can be completely substituted for aluminum in this compound, the aluminum ions are presumably in fourfold coordination.     

Effects of Sm2O3 and Gd2O3+ Nd2O3 on Electromechanical Properties of PbTiO3 Ceramics

The electromechanical properties of PbTiO₃ ceramics, modified by substitution of Sm or Gd + Nd (same average atomic radius as Sm) for Pb, were studied in the range of 6% to 14% substitution. The modified PbTiO₃ ceramics were stable, and the Curie temperature decreased linearly over this composition range. The 10% Sm composition had a large anisotropy in the coupling factor ratio, k _t / k _p , and a similar, but weaker, effect developed for 12% (1/2 Gd + 1/2 Nd). This indicates that other than average ion size may influence the electromechanical coupling factor ratio.     

Characterization of Freeze-Dried Al2O3 and Fe2O3

Oxide crystallite formation and growth from freeze-dried sulfates were studied for the representative materials Al₂O₃ and Fe₂O₃. Transmission and scanning electron micrographs showed the formation and growth of chainlike aggregates of crystallites. Aggregation occurred as part of the nucleation and growth of the oxide, and discrete oxide particles were never present. Orientation of the chain aggregates was related to the ice structure formed during freezing. X-ray line broadening data showed that crystallite size is a function of the 1/5 to 1/7 power of time for isothermal treatments. A qualitative analysis of material transport favored the surface diffusion mechanism.     

Phases in the Binary Systems PbO—La2O3, Gd2O3, and Sm2O3

In the binary system PbO–La_zO₃ only one compound, 4PbO.La₂O₃, exists; it is flanked by two eutectics. The structure of the compound, although of lower symmetry, is intimately related to the C modification of the rare earths. Below 800° to 1000°C, metastable solid solutions are formed from oxide mixtures coprecipitated from mixed solutions of the nitrates, the cubic parameter a = 5.66 A, if extrapolated to pure La₂O₃, corresponding to half the a parameter of the C form of La₂O₃. The solid solutions existing between the compositions La₂O₃–2Pb0 and pure La₂O₃ have a cubic face–centered lattice and obey Vegard's rule. The systems of PbO with Sm₂O₃ and Gd₂O₈ are quite similar to that with La₂O₃. The compound Sm₂O₃.4Pb0 decomposes at 1000°C with evaporation of PbO; Sm₂O₃ remains in the B modification.     

Interreaction Between Al2O3 and a CaO-Al2O3 Melt

Poly crystalline and single-crystalline α-alumina were reacted with a eutectic CaO-Al₂O₃ melt at 1530°C. A reaction zone develops in which a strongly textured CA₆ layer, as well as a CA₂ layer, forms, with a remaining layer of unreacted CaO-AI₂O₃ melt. Silica, an impurity in the α-alumina, is rejected by the advancing CA₆ phase and accumulates as calcium alumino-silicates in channels that assist in the reaction as fast transport paths. Reaction mechanisms and welding are briefly discussed.     

Cation Self-Diffusion in Polycrystalline Y2O3 and Er2O3

A tracer sectioning technique was used to measure cation self-diffusion coefficients in fully dense polycrystalline Y_aO₃ and Er₂O_s under oxidizing conditions. The results are described by the relations for Y₂O₃ (1400° to 1670°C), and for Er₂O₃ (1400° to 1700°C). The greater activation energy for erbium diffusion in erbia may be partly attributable to a mass effect.     

The System HfO2-Y2O3-Er2O3

A mathematical model of the liquidus surface based on a reduced polynomial method was proposed for the system HfO₂-Y₂O₃-Er₂O₃. The results of calculations according to this model agree fairly well with the experimental data. Phase equilibria in the system HfO₂-Y₂O₃-Er₂O₃ were studied on melted (as-cast) and annealed samples using X-ray diffraction (at room and high temperatures) and micro-structural and petrographic analyses. The crystallization paths in the system HfO₂-Y₂O₃-Er₂O₃ were established. The system HfO₂-Y₂O₃-Er₂O₃ is characterized by the formation of extended solid solutions based on the fluorite-type (F) form of HfO₂ and cubic (C) and hexagonal (H) forms of Y₂O₃ and Er₂O₃. The boundary curves of these solid solutions have the minima at 2370°C (15. 5 mol% HfO₂, 49. 5 mol% Y₂O₃) and 2360°C (10. 5 mol% HfO₂, 45. 5 mol% Y₂O₃). No compounds were found to exist in the system investigated.     

Dynamic Fracture Characterization of Al2O3 and SiCw/Al2O3

The dynamic stress intensity factors, which were determined with newly developed bar impact facilities and a new data reduction procedure, for an Al₂O₃ ceramic and 29 vol% SiC_w/Al₂O₃ composite were virtually identical, thus indicating that the short SiC whiskers were ineffective under dynamic fracture. SEM studies revealed five distinct fracture morphologies with increased percentage area of transgranular fracture in both materials with rapid crack propagation. Also, the high dynamic stress intensity factor caused multiple microscopic crack planes to form and then join as the crack advanced.     

Depolymerization of GeO2 and B2O3-GeO2 Network Glasses by Sb2O3

Binary Sb₂O₃-GeO₂ glasses containing 45 mol% Sb₂O₃ and ternary Sb₂O₃-B₂O₃-GeO₂ glasses containing 50 mol% GeO₂ were prepared. Their densities (volumes), refractive indices, and infrared spectra were determined, and their colors and high-temperature viscosities were estimated visually. Small amounts of Sb₂O₃ (∼10 mol%) appear to perturb neither the Ge-O-Ge network nor those B-O-Ge networks with small B/Ge ratios (∼0.2). The B-O-Ge networks with larger B/Ge ratios (∼1.0) depolymerize in the presence of even less Sb₂O₃. Amounts of Sb₂O₃ >10 mol% appear to depolymerize the Ge-O-Ge and Ge-O-B networks progressively, possibly with the formation of chains. A structurally sensitive ir isofrequency contour technique developed for ternary glass systems was applied successfully to these Sb₂O₃-B₂O₃-GeO₂ glasses. These contours can thus readily detect significant network depolymerization in the absence of the usual network modifiers.     

Kinetics of Solid-State Reaction of Bi2O3 and Fe2O3

Solid-state reactions of equimolar mixtures of Bi₂O₃ and Fe₂O₃ from 625° to 830°C and their kinetics were investigated. The reaction rates were determined from the integrated X-ray diffraction intensities of the strongest peaks of the reactants and products. The activation energy for the formation of BiFeO₃ was 96.6±9.0 kcal/mol; that for a second-phase compound, Bi₂Fe₄O₉, which formed above 675°C, was 99.4±9.0 kcal/mol. Specific rate constants for these simultaneous reactions were obtained. The preparation of single-phase BiFeO₃ from the stoichiometric mixture of Bi₂O₃ and Fe₂O₃ is discussed.     

The System Al2O3-Cr2O3-Sio2

Liquidus phase equilibrium data are presented for the system Al₂O₃-Cr₂O₃-SiO₂. The liquidus diagram is dominated by a large, high-temperature, two-liquid region overlying the primary phase field of corundum solid solution. Other important features are a narrow field for mullite solid solution, a very small cristobalite field, and a ternary eutectic at 1580°C. The eutectic liquid (6Al₂O₃-ICr₂O₃-93SiO₂) coexists with a mullite solid solution (61Al₂O₃-10Cr₂O₃-29SiO₂), a corundum solid solution (19Al₂O₃-81Cr₂O₃), and cristobalite (SO₂). Diagrams are presented to show courses of fractional crystallization, courses of equilibrium crystallization, and phase relations on isothermal planes at 1800°, 1700°, and 1575°C. Tie lines were sketched to indicate the composition of coexisting mullite and corundum solid solution phases.     

Ta2O5/Nb2O5 and Y2O3 Co-doped Zirconias for Thermal Barrier Coatings

Zirconia doped with 3.2–4.2 mol% (6–8 wt%) yttria (3–4YSZ) is currently the material of choice for thermal barrier coating topcoats. The present study examines the ZrO₂-Y₂O₃-Ta₂O₅/Nb₂O₅ systems for potential alternative chemistries that would overcome the limitations of the 3–4YSZ. A rationale for choosing specific compositions based on the effect of defect chemistry on the thermal conductivity and phase stability in zirconia-based systems is presented. The results show that it is possible to produce stable (for up to 200 h at 1000°–1500°C), single (tetragonal) or dual (tetragonal + cubic) phase chemistries that have thermal conductivity that is as low (1.8–2.8W/m K) as the 3–4YSZ, a wide range of elastic moduli (150–232 GPa), and a similar mean coefficient of thermal expansion at 1000°C. The chemistries can be plasma sprayed without change in composition or deleterious effects to phase stability. Preliminary burner rig testing results on one of the compositions are also presented.     

Wet Milling of Fe/Al/Al2O3 and Fe2O3/Al/Al2O3 Powder Mixtures

Wet milling of Al₂O₃-aluminide alloy (3A) precursor powders in acetone has been investigated by milling Fe/Al/Al₂O₃ and Fe₂O₃/Al/Al₂O₃ powder mixtures. The influence of the milling process on the physical and chemical properties of the milled powders has been studied. Particle refinement and homogenization were found not to play a dominant role, whereas plastic deformation of the metal particles leads to the formation of dislocations and a highly disarranged polycrystalline structure. Although no chemical reactions among the powder components in Fe₂O₃/Al/Al₂O₃ powder mixtures were observed, the formation of a nanocrystalline, ordered intermetallic FeAl phase in Fe/Al/Al₂O₃ powder mixtures caused by mechanical alloying was detected. Chemical reactions of Fe and Al particle surfaces with the atmosphere and the milling media lead to the formation of highly porous hydroxides on the particle surfaces. Hence the specific surface area of the powders increases, while the powder density decreases during milling. The fraction of Fe oxidized during milling was determined to be 0.13. The fraction of Al oxidized during milling strongly depends on the metal content of the powder mixture. It ranges between 0.4 and 0.8.     

Bimodal Sintering of Al2O3/Al2O3 Platelet Ceramic Composites

The sintering behavior of an Al₂O₃ compact containing uniformly dispersed Al₂O₃ platelets has been investigated. The results reveal a significant decrease in the sintering rate as well as the formation of voids and cracklike defects in the presence of nonsinterable platelets. The addition of a small amount (2 vol%) of tetragonal-ZrO₂ particles enhances the sintering rate, increases end-point density (∼99.5% of theoretical density) and prevents formation of sintering defects.     

Stabilization of β-Bi2O3 by Sb2O3 Doping

The metastable β form of bismuth sesquioxide was obtained by doping antimony oxide. The solubility of antimony was 4 to 10 at. %in β specimens, where more than 75% of the antimony atoms were valenced at 5+.