基于线性时变扰动模型的间歇过程最优迭代学习控制

A batch-to-batch optimal iterative learning control (ILC) strategy for the tracking control of product quality in batch processes is presented. The linear time-varying perturbation (LTVP) model is built for product quality around the nominal trajectories. To address problems of model-plant mismatches, model prediction errors in the previous batch run are added to the model predictions for the current batch run. Then tracking error transition models can be built, and the ILC law with direct error feedback is explicitly obtained. A rigorous theorem is proposed, to prove the convergence of tracking error under ILC. The proposed methodology is illustrated on a typical batch reactor and the results show that the performance of trajectory tracking is gradually improved by the ILC.     

基于广义预测控制的间歇生产迭代优化控制

针对间歇生产,提出了一种基于广义预测控制的批次迭代优化控制策略--BGPC,在间歇过程中引入批次间优化的思想,将迭代学习控制ILC和广义预测控制GPC相结合,在GPC实时结构参数辨识的基础上利用前面批次的模型预测误差修正当前批次的模型预测值.该算法能够有效地克服模型失配、扰动和系统参数变化等情况.文章最后以一个数值例子和间歇反应器为对象进行仿真试验,验证了该算法是有效的.     

Design and Analysis of Integrated Predictive Iterative Learning Control for Batch Process Based on Two-dimensional System Theory

Based on the two-dimensional (2D) systemtheory, an integrated predictive iterative learning control (2D-IPILC) strategy for batch processes is presented. First, the output response and the error transition model predictions along the batch index can be calculated analytically due to the 2D Roesser model of the batch process. Then, an integrated framework of combining iterative learning control (ILC) andmodel predictive control(MPC) is formed reasonably. The output of feedforward ILC is estimated on the basis of the predefined process 2D model. By minimizing a quadratic objective function, the feedback MPC is introduced to obtain better control performance for tracking problem of batch processes. Simulations on a typical batch reactor demonstrate that the satisfactory tracking performance as well as faster convergence speed can be achieved than traditional proportion type (Ptype) ILC despite the model error and disturbances.     

时变间歇过程的2D-PID自适应控制方法

针对间歇过程存在的参数时变问题,提出一种基于二维PID(2D-PID)迭代学习框架的自适应控制方法。首先,通过粒子群优化算法快速获取初始的2D-PID控制参数。在批次内,采用自调整神经元PID控制器对其进行在线自适应调节。进一步,考虑批次间的重复特性,通过PID型迭代学习控制,以利用历史批次的信息来修正当前批次的调节变量,最终提高控制性能。通过间歇发酵过程的仿真和比较研究,验证了所提出方法的有效性。     

Batch-to-batch optimal control of a batch polymerisation process based on stacked neural network models

A neural network based batch-to-batch optimal control strategy is proposed in this paper. In order to overcome the difficulty in developing mechanistic models for batch processes, stacked neural network models are developed from process operational data. Stacked neural networks have enhanced model generalisation capability and can also provide model prediction confidence bounds. However, the optimal control policy calculated based on a neural network model may not be optimal when applied to the true process due to model plant mismatches and the presence of unknown disturbances. Due to the repetitive nature of batch processes, it is possible to improve the operation of the next batch using the information of the current and previous batch runs. A batch-to-batch optimal control strategy based on the linearisation of stacked neural network model is proposed in this paper. Applications to a simulated batch polymerisation reactor demonstrate that the proposed method can improve process performance from batch to batch in the presence of model plant mismatches and unknown disturbances.     

Deterministic vs. stochastic performance assessment of iterative learning control for batch processes

The performance assessment of linear time‐invariant batch processes when iterative learning control (ILC) is implemented has been discussed. Previous literatures show that conventional performance assessment cannot be directly applied to batch processes due to the nature of batch operations. Chen and Kong have suggested a new method to assess the control performance of batch processes using optimal ILC as the benchmark. In their work, ILC controllers are assumed to affect either stochastic or deterministic performance but without considering their interaction. This work elaborates the controllers effects on both stochastic and deterministic control performance of batch processes. It is shown that the optimal solution based on the minimum variance control law has a trade‐off between deterministic and stochastic performance, which can be shown by a trade‐off curve. Furthermore, a method is proposed to estimate this curve from routine operating data, against which the performance of ILC controllers can be assessed. Simulation studies are conducted to verify the proposed method. © 2012 American Institute of Chemical Engineers AIChE J, 59: 457–464, 2013     

基于输入轨迹参数化的间歇过程迭代学习控制

针对间歇过程的迭代学习控制问题,提出了一种基于输入轨迹参数化的迭代学习控制策略。根据最优输入轨迹的主要形态特征,将其参数化为较少量的决策变量,降低传统迭代学习控制复杂性的同时维持良好的优化控制效果。基于输入轨迹参数化的迭代学习控制策略能保持算法的简洁性和易实现性,在不确定扰动影响下逐步改善产品质量。对一个间歇反应器的仿真研究验证了本文方法的有效性。     

High-order iterative learning model predictive control for batch chemical processes

In order to address two-dimensional (2D) control issue for a class of batch chemical processes, we propose a novel high-order iterative learning model predictive control (HILMPC) method in this paper. A set of local state-space models are first constructed to represent the batch chemical processes by adopting the just-in-time learning (JITL) technique. Meanwhile, a pre-clustered strategy is used to lessen the computational burden of the modelling process and improve the modelling efficiency. Then, a two-stage 2D controller is designed to achieve integrated control by combining high-order iterative learning control (HILC) on the batch domain with model predictive control (MPC) on the time domain. The resulting HILMPC controller can not only guarantee the convergence of the system on the batch domain, but also guarantee the closed-loop stability of the system on the time domain. The convergence of the HILMPC method is ensured by rigorous analysis. Two examples are presented in the end to demonstrate that the developed method provides better control performance than its previous counterpart.     

Development of batch proportional-integral-derivative controller

Previous batch control methods, such as iterative learning control (ILC) or run-to-run (R2R) control, can significantly improve the control performance of the batch process. However, to guarantee the expected good control performance, a fairly accurate process model is required for these controllers. Also, the implementation is numerically complicated so that it is difficult to be applied to real manufacturing processes. To overcome these problems, a new batch proportional-integral-derivative (PID) control method is proposed, which borrows the concept of the conventional PID control method. Simulation studies confirm that the proposed method shows acceptable performance in tracking a setpoint trajectory, rejecting disturbances, and robustness to noises and variation of process dynamics. The application to the commercial batch process of a single crystal grower verifies that the proposed method can significantly contribute to improving the control performances of real batch processes.     

间歇结晶过程的分批优化

It is the fact that several process parameters are either unknown or uncertain. Therefore, an optimal control, profile calculated with developed process models with respect to such process parameters may not give an optimal performance when implemented to real processes. This study proposes a batch-to-batch optimization strategy for the estimation of uncertain kinetic.par.ameters in a batch crystallization process of potassium sulfate production. The knowledge of a crystal size distribution of the product at the end of batch operation is used in the proposed methodology. The updated kinetic parameters are applied for determining an optimal operating temperature policy for the next batch run.     

局部最小二乘支持向量机回归在线建模方法及其在间歇过程的应用

当间歇生产切换于不同的工艺条件时,由于新工况下的样本一般很少,且批次间存在着不确定性（由于原材料波动或过程动态特性波动等）,基于全局学习的建模方法（如最小二乘支持向量机回归,LSSVR）建立的模型泛化性能不强。将局部学习融入LSSVR中,提出一种局部LSSVR（local LSSVR, LLSSVR）的间歇过程在线建模方法。结合前一批次离线优化后的LSSVR参数,针对待预测新样本在线选择与之相关的近邻样本集并基于此进行建模。以建立青霉素发酵过程的菌体浓度为例,验证了LLSSVR算法能够从过程的第2个生产批次开始在线建立较准确的预报模型,较LSSVR有着更好的推广能力、适应性和鲁棒性。     

Novel semibatch supersaturation control approach for the cooling crystallization of heat-sensitive materials

This article introduces the application of a novel supersaturation control (SSC) approach for the crystallization of heat-sensitive materials. Traditional SSC implements parabolic temperature profile with slow initial cooling that maximizes growth over nucleation, however, which may also promote heat degradation. The proposed semibatch SSC fixes the crystallization temperature to a sufficiently low value to minimize thermal degradation, and manipulates the flow rate of a higher temperature feed stream to control the supersaturation. The high temperature feed is produced in a continuous dissolver before feeding, thus the solution spends considerably shorter time at high temperature than in the traditional batch cooling crystallization. This work demonstrates the effectiveness of the semibatch operation for the cooling crystallization of heat-sensitive substances by thorough simulation study as well as experimental investigations. The experimental validation confirmed the simulation results, and both analyses revealed the superiority of semibatch SSC for the crystallization of heat-sensitive materials.     

BATCH-TO-BATCH OPTIMAL CONTROL OF BATCH PROCESSES BASED ON RECURSIVELY UPDATED NONLINEAR PARTIAL LEAST SQUARES MODELS

A batch-to-batch optimal control approach for batch processes based on batch-wise updated nonlinear partial least squares (NLPLS) models is presented in this article. To overcome the difficulty in developing mechanistic models for batch/semi-batch processes, a NLPLS model is developed to predict the final product quality from the batch control profile. Mismatch between the NLPLS model and the actual plant often exists due to low-quality training data or variations in process operating conditions. Thus, the optimal control profile calculated from a fixed NLPLS model may not be optimal when applied to the actual plant. To address this problem, a recursive nonlinear PLS (RNPLS) algorithm is proposed to update the NLPLS model using the information newly obtained after each batch run. The proposed algorithm is computationally efficient in that it updates the model using the current model parameters and data from the current batch. Then the new optimal control profile is recalculated from the updated model and implemented on the next batch. The procedure is repeated from batch to batch and, usually after several batches, the control profile will converge to the optimal one. The effectiveness of this method is demonstrated on a simulated batch polymerization process. Simulation results show that the proposed method achieves good performance, and the optimization with the proposed NLPLS model is more effective and stable than that with a batch-wise updated linear PLS model.     

BATCH-TO-BATCH OPTIMAL CONTROL OF BATCH PROCESSES BASED ON RECURSIVELY UPDATED NONLINEAR PARTIAL LEAST SQUARES MODELS

A batch-to-batch optimal control approach for batch processes based on batch-wise updated nonlinear partial least squares (NLPLS) models is presented in this article. To overcome the difficulty in developing mechanistic models for batch/semi-batch processes, a NLPLS model is developed to predict the final product quality from the batch control profile. Mismatch between the NLPLS model and the actual plant often exists due to low-quality training data or variations in process operating conditions. Thus, the optimal control profile calculated from a fixed NLPLS model may not be optimal when applied to the actual plant. To address this problem, a recursive nonlinear PLS (RNPLS) algorithm is proposed to update the NLPLS model using the information newly obtained after each batch run. The proposed algorithm is computationally efficient in that it updates the model using the current model parameters and data from the current batch. Then the new optimal control profile is recalculated from the updated model and implemented on the next batch. The procedure is repeated from batch to batch and, usually after several batches, the control profile will converge to the optimal one. The effectiveness of this method is demonstrated on a simulated batch polymerization process. Simulation results show that the proposed method achieves good performance, and the optimization with the proposed NLPLS model is more effective and stable than that with a batch-wise updated linear PLS model.     

间歇过程的批间自优化控制

针对间歇过程的实时优化问题,提出了一种基于最优性条件近似法的批间自优化控制策略。首先获取标称工作点的最优输入轨迹形态,将其参数化为少量决策变量,简化问题复杂度。然后根据参数化后的决策变量得到批间优化的最优性条件,并建立批次终端可测变量和最优性条件之间的回归模型,将其作为被控变量进行批间跟踪控制。对一个间歇反应器进行了仿真研究,结果表明方法能有效实现间歇过程的批间自优化控制。     

Iterative learning model predictive control for constrained multivariable control of batch processes

In this paper, we propose a model predictive control (MPC) technique combined with iterative learning control (ILC), called the iterative learning model predictive control (ILMPC), for constrained multivariable control of batch processes. Although the general ILC makes the outputs converge to reference trajectories under model uncertainty, it uses open-loop control within a batch; thus, it cannot reject real-time disturbances. The MPC algorithm shows identical performance for all batches, and it highly depends on model quality because it does not use previous batch information. We integrate the advantages of the two algorithms. The proposed ILMPC formulation is based on general MPC and incorporates an iterative learning function into MPC. Thus, it is easy to handle various issues for which the general MPC is suitable, such as constraints, time-varying systems, disturbances, and stochastic characteristics. Simulation examples are provided to show the effectiveness of the proposed ILMPC.     

在线自适应批次过程监视的双滑动窗口MPCA方法

Online monitoring of chemical process performance is extremely important to ensure the safety of a chemical plant and consistently high quality of products. Multivariate statistical process control has found wide applications in process performance analysis, monitoring and fault diagnosis using existing rich historical database. In this paper, we propose a simple and straight forward multivariate statistical modeling based on a moving window MPCA （multiway principal component analysis） model along the time and batch axis for adaptive monitoring the progress of batch processes in real-time. It is an extension to minimum window MPCA and traditional MPCA. The moving window MPCA along the batch axis can copy seamlessly with variable run length and does not need to estimate any deviations of the ongoing batch from the average trajectories. It replaces an invariant fixed-model monitoring approach with adaptive updating model data structure within batch-to-batch, which overcomes the changing operation condition and slows time-varying behaviors of industrial processes. The software based on moving window MPCA has been successfully applied to the industrial polymerization reactor of polyvinyl chloride （PVC） process in the Jinxi Chemical Company of China since 1999.     

Optimization of nonlinear process based on sequential extreme learning machine

In this paper, a new approach to the optimal control with constraints is proposed to achieve a desired end product quality for nonlinear processes based on new kernel extreme learning machine (KELM). The contributions of the paper are as follows: (1) In existing ILC algorithm, the model was built only between manipulated input variables U and output variables Y without considering the state variables. However, the states variables X_state are important in the industrial processes, which are usually constrained. In this paper, the variables are divided into state variables X_state, manipulated input variables U and output Y in the process of modeling. Then ΔU can be obtained by batch-to-batch iterative learning control separately. Kernel algorithm is added to ELM. (2) Constraints of state variables X_state and the input variables U are considered in the current version. PSO is used to solve the optimization problem. (3) Kernel trick is introduced to improve accuracy of ELM modeling. New KELM algorithm is proposed in the current version. The input trajectory for the next batch is accommodated by searching for the optimal value through the error feedback at a minimum cost. The particle swarm optimization algorithm is used to search for the optimal value based on the iterative learning control (ILC). The proposed approach has been shown to be effective and feasible by applying bulk polymerization of the styrene batch process and fused magnesium furnace.     

Model based robust control approach for batch crystallization product design

The paper presents a novel control approach for crystallization processes, which can be used for designing the shape of the crystal size distribution to robustly achieve desired product properties. The approach is based on a robust optimal control scheme, which takes parametric uncertainties into account to provide decreased batch-to-batch variability of the shape of the crystal size distribution. Both open-loop and closed-loop robust control schemes are evaluated. The open-loop approach is based on a robust end-point nonlinear model predictive control (NMPC) scheme which is implemented in a hierarchical structure. On the lower level a supersaturation control approach is used that drives the system in the phase diagram according to a concentration versus temperature trajectory. On the higher level a robust model-based optimization algorithm adapts the setpoint of the supersaturation controller to counteract the effects of changing operating conditions. The process is modelled using the population balance equation (PBE), which is solved using a novel efficient approach that combines the quadrature method of moment (QMOM) and method of characteristics (MOC). The proposed robust model based control approach is corroborated for the case of various desired shapes of the target distribution.