首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 265 毫秒
1.
本文通过对一别墅建筑用小型太阳能及天然气为热源的单效吸收式空调系统的组成分析和吸收式制冷机组模型的热力计算,为太阳能在别墅建筑的推广应用提供一个理论模式.  相似文献   

2.
闭式环路水源热泵空调系统作为一种节能型的空调形式被提出,但由于其所应用的地区、建筑及负荷特性各不相同、运行工况复杂,是否比常规系统节能不能简单定论。本文采用对比评价和数值模拟分析相结合的研究方法,借助eQUEST建筑能耗模拟软件对我国4个气候分区下的72个建筑模型进行模拟研究,并通过与常规集中式VAV空调系统的对比,对水环热泵空调系统的能耗和应用情况进行综合分析,总结气候特点、内区负荷、建筑规模、辅助热源的形式等关键因素对水环热泵空调系统能耗所产生的影响,初步得出水环热泵空调系统在我国的动态模拟评价结果。  相似文献   

3.
设计太阳能吸收式制冷-海水淡化联产系统,以大连、深圳、上海3个沿海城市为例,选取一栋别墅建筑作为研究对象,利用Matlab对系统容量匹配和经济性进行比较。结果表明:对于同一栋别墅,太阳能集热器面积由建筑物所在地区的建筑冷负荷确定,大连最小,深圳其次,上海最大;淡水产量与建筑冷负荷呈正比关系;联产系统在上海初投资最高,在深圳运行维护费用最高,在大连投资回收期最长;相比太阳能吸收式制冷系统,太阳能吸收式制冷-海水淡化联产系统的投资回收期可缩短9.4%。  相似文献   

4.
因全球能源危机和环境污染日益严峻,加上建筑空调需求量的增长和电力成本增加,考虑到吸收式制冷具有无比的优越性,提出了将可再生能源—太阳能和沼气联合驱动吸收式制冷空调的思想,建立了此系统主要性能参数的数学模型,按照三种不同的运行方案,运用matlab/simulink软件分别建立其仿真模块并对主要性能参数进行仿真计算,仿真结果够很好的反映太阳能沼气吸收式制冷空调运行的特点。为可再生能源应用于建筑空调的研究与应用、缓解化石能源供给的危机和保护环境提出了有意义的参考。  相似文献   

5.
VRV空调系统与螺杆式风冷热泵空调系统全年能耗比较   总被引:3,自引:0,他引:3  
本文针对某一实际建筑,分别进行VRV空调系统和螺杆式风冷热泵空调系统设计,并利用动态负荷计算软件,对VRV空调系统和螺杆式风冷热泵空调系统进行了全年运行季节动态能耗计算,并利用季节能效比SEER分析比较了两种空调系统在冬、夏季运行季节内的能耗利用情况.  相似文献   

6.
本文以100m2的住宅用户为研究对象,提出一种直膨式多功能太阳能热泵系统,该系统可以实现夏季制冷、冬季制热、全年提供生活热水,并且随太阳辐射强度的不同可以实现变容量调节。对直膨式多功能太阳能热泵系统的初投资、年能耗、寿命周期内的总投资等指标进行分析,与普通空调和电热水器、普通空调和燃气热水器、普通空调和空气源热泵热水器进行比较,并分析了使用年限、日太阳能供热小时数及日生活热水用量等因素对系统经济性的影响。此外,还对此系统的变容量运行进行了总体性的经济性分析。  相似文献   

7.
根据太阳能混合吸收式制冷循环的特点,提出一种可用于该循环的新型高效蓄能系统。分析该系统的工作原理及特性,并与传统的蓄热方式和蓄冷方式蓄能系统进行性能比较分析,在相同蓄冷量情况下,新型蓄能系统的蓄能体积是传统系统蓄能体积的1/10以下,从而为促进蓄能装置小型化、推动小型太阳能空调的商品化提供理论依据。  相似文献   

8.
中针对多联式空调(热泵)机组部分负荷能耗效能的评价参数指标IPLV的标定计算作了明确的规定,但是针对多联式空调系统有别于单台冷水机组运行特性和能效的特性,决定TIPLV的标定计算忽略了室内机作为机组系统的一部分而对系统负荷率及能效变化所构成的影响.提出多联式空调系统IPLV的计算公式理应在综合分析研究机组运行工况、系统开机率、室内机负荷均匀度、部分负荷率及对应负荷率下机组的能效比这些影响因素而综合定义给出.  相似文献   

9.
太阳能热泵-地板辐射采暖系统的应用研究   总被引:3,自引:0,他引:3  
太阳能热泵技术是能源利用技术发展的一个重要方向,本文分析了太阳能热泵一地板辐射采暖系统的特点及其应用前景。为了探寻太阳能热利用的有效方式,结合所做的相关试验对比分析了连续运行与间歇运行模式下采暖系统的运行效果。结果表明间隙性运行方式可以充分利用地板辐射系统的蓄热特性,缩短热泵运行时间,提高系统的COP值,从而达到节能的效果。  相似文献   

10.
分析影响太阳能两级吸收式空调系统的整体性能的主要因素:集热器进出口热水的温度、各设备中溴化锂溶液的浓度与压力。根据两级吸收式循环的特点,可以运用溶液混合观点构造新型高效的太阳能吸收式制冷空调。运用仿真程序得出了太阳能两级吸收式空调在集热器出口温度在77.5℃左右时可以得到最大的整体效率,为太阳能空调系统的优化奠定了理论基础。  相似文献   

11.
总结了近年来我国能源发展取得的成绩,研究分析了我国能源发展面临的形势和挑战,提出了当前和今后一个时期能源工作的主要任务。特别强调保证能源安全供应是能源战线的一项首要任务、基本任务和长期任务,同时要大力节约能源,调整优化能源结构,加快能源科技自主创新,扩大能源国际合作,推动能源科学发展,为经济社会健康、持续、协调发展提供保障。  相似文献   

12.
Abstract

A conceptual design, performance analysis, system optimization and simulation of an OTEC (Ocean Thermal Energy Conversion) power plant was carried out in the present study. The OTEC plant acts as the bottom cycle of the Third Nuclear Power Plant, utilizing the warm water discharged from the nuclear plant as the heat source and the cold deep seawater pumped from the nearby sea bottom as the heat sink. The nominal net power output from the OTEC plant is estimated to be 8.74 MWe. A plant simulation was further carried out to study the OTEC plant performance due to seasonal variation of the warm water temperature, which shows that the OTEC plant is able to deliver an electricity of 5.18×107 kWH per year. The net power output in the winter season will be reduced to about one eighth of that in the summer season. The final discharged warm water temperature was shown to be below 29°C all year around, so that the current thermal pollution problem of the nuclear power plant can be eliminated. Additionally there is the side benefit of 8.74 MWe net power generation from ocean energy resource. This OTEC plant will become economically feasible if the installation cost is considered as a thermal pollution control investment.  相似文献   

13.
受广州市建委委托,广州市设计院承担编写“广州市能源计量与管理系统建设技术指引”。由于篇幅所限,对编写内容压缩较大。  相似文献   

14.
岩石变形破坏过程中的能量传递和耗散研究   总被引:25,自引:0,他引:25  
岩石变形破坏的过程是和外界产生能量交换的过程。从理论上分析了用能量方法研究岩石破坏问题的合理性,以及岩石在变形过程中弹性能、塑性能、表面能、辐射能、动能之间相互转化的过程、计算原理、以及对岩石破坏所起的不同作用。并分别从宏观和微观的角度研究了在不同的变形阶段中岩石能量耗散与释放问题。在宏观上,岩石变形前期以弹性应变能的方式存储外界提供的能量,同时又通过损伤演化等向外界耗散能量;变形的后期以剧烈的能量释放为主。微观上,存在多种引起岩石应变硬化和应变软化的机制,岩石存储能量还是向外界释放能量取决于这些微观机制竞争的最后结果,基于此推导了岩石变形中能量的传递方程,用试验研究了能量的转化和平衡,以及耗散能和释放能之间的比例关系。结果表明能量耗散导致岩石强度的降低,而能量释放是造成岩石灾变破坏的真正原因。从能量耗散与释放的观点研究岩石的破坏,可以从本质上把握岩石变形和破坏的物理机理,寻找岩石破坏的真正原因,为实际工程提供参考。  相似文献   

15.
16.
Recently, sustainable green energy harvesting systems have been receiving great attention for their potential use in self‐powered smart wireless sensor network (WSN) systems. In particular, though the developed WSN systems are able to advance public good, very high and long‐term budgets will be required in order to use them to supply electrical energy through temporary batteries or connecting power cables. This report summarizes recent significant progress in the development of hybrid nanogenerators for a sustainable energy harvesting system that use natural and artificial energies such as solar, wind, wave, heat, machine vibration, and automobile noise. It starts with a brief introduction of energy harvesting systems, and then summarizes the different hybrid energy harvesting systems: integration of mechanical and photovoltaic energy harvesters, integration of mechanical and thermal energy harvesters, integration of thermal and photovoltaic energy harvesters, and others. In terms of the reported hybrid nanogenerators, a systematic summary of their structures, working mechanisms, and output performances is provided. Specifically, electromagnetic induction, triboelectric, piezoelectric, photovoltaic, thermoelectric, and pyroelectric effects are reviewed on the basis of the individual and hybrid power performances of hybrid nanogenerators and their practical applications with various device designs. Finally, the perspectives on and challenges in developing high performance and sustainable hybrid nanogenerator systems are presented.  相似文献   

17.
Increasing attention has been paid toward enhancing energy retrofitting in machine tools due to its enormous energy consumption and high energy-saving potential. Developing energy-efficient machine tools and selecting appropriate machine tools in procurement processes are two effective approaches for saving energy. However, existing studies on the evaluation of energy performance to support the design and selection of machine tools, rarely consider various process controls, which have considerable impact on the energy performance of machine tools. This study proposes a group of key performance indicators, which are referred to as ‘inherent energy performance’ (IEP) indexes, to support the design and selection of machine tools with the consideration of the main process controls in the usage phase and their interaction. A systematic method is introduced to acquire the IEP indexes. The method involves a simplified measurement of basic data and the calculation of the indexes from the data. A case study indicates that the proposed indicators succeed in obtaining the energy demand information of almost all machine system activities and can be used to provide basic data for developing energy information labels, selecting matching machine tools, and designing energy-efficient machine tools.  相似文献   

18.
我国建筑节能战略研究   总被引:13,自引:0,他引:13  
给出了我国建筑运行能耗现状,并按照北方城镇建筑采暖、长江流域住宅采暖、住宅用能、非住宅建筑用能以及农村民用建筑用能的分类方法,分别分析了各类建筑能耗的特点、问题和节能的主要途径,同时对比了发达国家同类建筑用能与我国的差别。在基于数据和实际现象的分析的基础上,提出我国建筑能耗显著低于发达国家的主要原因是由于不同的生活方式和建筑使用模式所致,而维持目前这种相对节约的建筑使用方式与生活模式是实现我国建筑节能目标的基础。不同的生活方式和建筑使用方式需要不同的技术措施去实现节能,因此我国一定要采用与发达国家不同的技术途径来实现建筑节能目标。  相似文献   

19.
能源是人类活动的物质基础,推动了人类文明的演进与社会的发展。化石能源消费为全球带来工业文明巨大进步的同时,也带来了环境问题加剧、气候变化显著、能源贫困突出、能源安全问题凸显等负面影响。我国以煤为主的高碳能源结构和能源消费总量持续快速增长,已成为国内包括大气、水、土壤等关系民生的重大领域环境质量恶化、生态失衡的根本原因之一。开启新的能源革命,实现能源生产、流通、消费等全过程的绿色低碳化,是解决环境和气候变化问题的关键,也是推动我国由工业文明向生态文明转变的基础。本文回顾了人类文明与能源革命的发展历史,从推动文明发展的角度出发,分析全球能源革命的总体趋势,并基于我国国情,提出了生态文明建设背景下,推动能源革命的途径与建议。  相似文献   

20.
夏热冬冷地区新风能耗分析   总被引:1,自引:0,他引:1  
新风能耗大致要占到空调总能耗的25%~30%.为了有效地降低新风能耗,达到节能的目的,必须清楚地知道新风的全年能耗.本文主要对夏热冬冷地区新风全年能耗进行了分析.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号