首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Thermal stratification in solar energy storage tanks plays an important role in enhancing the performance of solar domestic hot water systems. The mixing that occurs when hot fluid from the solar collector enters the top of the tank is detrimental to the stratification. Mathematical models that are used for system analysis must therefore be able to capture the effects of this inlet jet mixing in order to accurately predict system performance. This paper presents a computational study of the heat transfer and fluid flow in a thermal storage tank of a solar domestic hot water system with a vertical inlet under negative buoyant plume conditions. The effects of parameters such as the fluid inlet velocity and temperature as well as inlet pipe diameter on the thermal mixing were considered. The work culminated in the development of a one-dimensional empirical model capable of predicting the transient axial temperature distribution inside the thermal storage tank. Predictions from the new model were in good agreement with both experimental data and detailed computational fluid dynamics predictions.  相似文献   

2.
A family of composite sorbents has been acknowledged as promising thermal storage materials for low grade thermal energy storage owing to its high specific storage capacity and low regenerating temperature. This paper reports a simplified numerical model aiming to determine the dynamic characteristics of the composite sorbents and evaluate the specific capacity and COP of the open-type thermal energy storage system. The computational results were validated with the experimental measurements carried out on an open-type thermal energy storage set-up filled with composite sorbents. By using the simplified numerical model, the dynamic characteristics of the composite sorbents in the thermal energy storage process were determined. The effects of the composite sorbents and the operating parameters on thermal energy storage system performance were also evaluated.  相似文献   

3.
Simon Ievers  Wenxian Lin   《Applied Energy》2009,86(12):2604-2614
A hot water storage device is one of the most common household appliances yet it is also one of the biggest sources of energy consumption. With natural resources fading, it is imperative that typical high-energy users such as hot water systems are made as energy efficient as possible. Research has shown that the thermal performance of a hot water system can be increased by maximising the level of thermal stratification within the storage tank, which could lead to huge energy saving. To analyse the effects of tank geometry and operating conditions on the thermal stratification within a storage tank, seven three-dimensional models have been numerically simulated by using the computational fluid dynamics program Fluent with realistic boundary and initial conditions applied. The level of thermal stratification in each model has been quantified using exergy analyses. The results show that increasing the tanks height/diameter aspect ratio, decreasing inlet/outlet flow rates and moving the inlet/outlet to the outer extremities of the tank all result in increasing levels of thermal stratification.  相似文献   

4.
To sufficiently store and use high-quality heat energy, thermal stratification is gradually applied in many kinds of energy storage fields such as solar thermal utilization system. Because of the unsteady characteristics of solar radiation, thermal storage becomes very essential in long-term operation of heating load. The wide application of thermal stratification lies in the minimization of the mixing effect by use of the thermal stratification, which is caused by the thermal buoyancy because of the difference of temperature between cold and hot water. According to the review, the conception of thermal stratification allows a wide variety of different design embodiments, which essentially extends the fields of practical application of these devices. In this paper a survey of the various types of thermal stratification tanks and research methods is presented, and reasons of energy storage with efficiency problems related to the applications are introduced and benefits offered by thermal stratification are outlined. The structure designs based on theoretical prediction of thermal-stratified water tank performed at many organizations are introduced and are compared with their experimental results. Finally, the development of the tank with thermal stratification in the future application is predicted.  相似文献   

5.
To the safe space operation of cryogenic storage tank, it is significant to study fluid thermal stratification under external heat leaks. In the present paper, a numerical model is established to investigate the thermal performance in a cryogenic liquid hydrogen tank under sloshing excitation. The interface phase change and the external convection heat transfer are considered. To realize fluid sloshing, the dynamic mesh coupled the volume of fluid (VOF) method is used to predict the interface fluctuations. A sinusoidal excitation is implemented via customized user-defined function (UDF) and applied on tank wall. The grid sensitivity study and the experimental validation of the numerical mode are made. It turns out that the present numerical model can be used to simulate the unsteady process in a non-isothermal sloshing tank. Variations of tank pressure, liquid and vapor mass, fluid temperature and thermal stratification are numerically investigated respectively. The results show that the sinusoidal excitation has caused large influence on thermal performance in liquid hydrogen tank. Some valuable conclusions are arrived, which is important to the depth understanding of the non-isothermal performance in a sloshing liquid hydrogen tank and may supply some technique reference for the methods of sloshing suppression.  相似文献   

6.
Thermal stratification in a mantled hot water storage tank is analysed numerically for different water inlet velocities. The aim is to obtain higher thermal stratification and supply hot water for usage as long as possible. Twelve different water inlet velocities to the hot water storage tank are considered. The numerical method is validated by comparing its results against experimental and numerical results from the literature. It turned out that the results obtained from the numerical analysis have shown very good agreements with the results from previous works. As a result, the water temperature in the tank increases with the increase of the water inlet velocities to the mantle but this increment is not proportional. After a period of operation of 7.2 h, which corresponds to the average sunshine duration in Turkey, temperature increments of 6.5 and 35 K have been estimated for the hot water inlet velocities of 0.01 and 0.3 m s?1, respectively, at a radial distance of 0.1 m and a height of 1 m inside the storage tank. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

7.
A stable thermal stratification in solarthermal storage tanks increases the energy efficiency of these systems. Especially in charging and discharging cycles, mixing occurs due to jet flows. The reliable prediction of the influence of the storage and of the charging device geometry on the loading behaviour is essential for the layout and improvement of stratified storage systems. A model approach for the computational calculation of the time-dependent temperature distribution in stratified storage tanks based on the one-dimensional heat transport equation is described in the present study. The numerical solution was obtained by application of the first order Upwind-discretization scheme. This basic approach was further refined by the consideration of charging jet flows and local turbulences in the area of stratification according to the strategies of Jirka, 2004, Mott and Woods, 2009 and implemented in MATLAB. Two simulation examples of different complexity have shown that the enhanced model could increase the calculation accuracy in comparison to similar CFD and experimental studies. The results of the MATLAB program were reached with much less calculation effort than the results of the CFD simulation.  相似文献   

8.
Sensible heat storage in fluids generates thermal stratification. In order to improve thermodynamic system efficiency, stratification should be promoted much more. To this scope, this article presents a numerical study of transient mixed convection. The study investigates the use of different fluids as a heat storage medium in cylindrical cavities with different aspect ratios. The effect of the fluids is made through the variation of physical properties represented through the Prandtl number. The system consists of a cavity with fluid injection at the top and fluid discharge at the bottom. Transient, two-dimensional, mixed convection flows in a thermal storage tank have been studied using finite volume method. The governing equations are the conservation equations for laminar natural convection flow based on the Boussinesq approximation. Forced convection flow is superimposed through the use of appropriate boundary conditions (inflow and outflow conditions). The study considers three representative fluids i.e. Torada oil, ethylene glycol and water. It considers also cavities with aspect ratios varying from 3 to 1/3. Flow analysis is made through typical transient temperature distributions for the three fluids and for different configurations. The performances of thermal energy storage using these fluids are analyzed through the transient thermal storage efficiency.  相似文献   

9.
Multilayer fabric stratification pipes for solar tanks   总被引:1,自引:0,他引:1  
The thermal performance of solar heating systems is strongly influenced by the thermal stratification in the heat storage. The higher the degree of thermal stratification is, the higher the thermal performance of the solar heating systems. Thermal stratification in water storage can for instance be achieved by use of inlet stratifiers combined with low flow operation in the solar collector loop. In this paper, investigation of a number of different fabric stratification pipes is presented and compared to a non-flexible inlet stratifier. Additional, detailed investigation of the flow structure close to two fabric stratification pipes is presented for one set of operating conditions by means of the optical PIV (Particle Image Velocimetry) method.  相似文献   

10.
The increase in exergy storage capacity that is attained in thermal storages through stratification is assessed. A design‐oriented temperature‐distribution model for vertically stratified thermal storages that facilitates the evaluation of storage energy and exergy contents is utilized. The paper is directed towards demonstrating the thermodynamic benefits achieved through stratification, and increasing the utilization of exergy‐based performance measures for stratified thermal storages. A wide range of realistic storage‐fluid temperature profiles is considered, and for each the relative increase in exergy content of the stratified storage compared to the same storage when it is fully mixed is evaluated. The results indicate that, for all temperature profiles considered, the exergy storage capacity of a thermal storage increases when it is stratified, and increases as the degree of stratification, as represented through greater and sharper spatial temperature variations, increases. Furthermore, the percentage increase in exergy capacity is greatest for storages at temperatures near to the environment temperature, and decreases as the mean storage temperature diverges from the environment temperature (to either higher or lower temperatures). It is concluded that (i) the use of stratification in thermal storage designs should be considered as it increases the exergy storage capacity of a thermal storage and (ii) exergy analysis should be applied in the analysis and comparison of stratified thermal storage systems. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

11.
《Applied Thermal Engineering》2002,22(11):1207-1216
Accurate modeling of solar heating or cooling with storage generally requires an accounting of the stratification within such storage tank, since overall system performance is significantly affected by the storage temperature distribution. In this study, a simple one-dimensional multi-node approach, taking into account of the axial heat conduction between nodes, has been used to theoretically analyze temperature stratification in the thermal storage tank. The results indicate that, for less collector area, the heat removal factor plays a major role in increasing the system performance, than the thermal stratification. Also, an optimum ratio of tank volume over collector area exists for a solar powered absorption air conditioning system. This paper also reviews the state of the art on different kinds of variable inlet design, and a simple new inlet design (partitioning the tank) has been introduced to effect better thermal stratification in storage tank.  相似文献   

12.
A numerical analysis of the three-dimensional temperature and velocity fields in horizontal cylindrical storage tanks was performed. The phenomena of laminar natural convection and vertical stratification of temperature were considered. The developed three-dimensional transient computing code solves the equations of energy and momentum through the finite volume method. The simulation of fluid cooling process inside the tank showed the formation of stratified temperature profiles that matched those obtained experimentally. Based on several simulations, a correlation was proposed for determining the degree of thermal stratification inside the tank regarding thermal and geometrical parameters. From this correlation, an expression was proposed to predict the fluid temperature profiles along the time. This information is very important in many applications, such as in thermosiphon solar water heating systems, where the global efficiency of the system increases with the thermal stratification degree of the working fluid. Another case studied considered that the tank was connected to solar collectors, aiming at investigating the influence of the inlet jet position with and without a baffle plate on the preservation of the thermal stratification. Results showed that the baffle plate modified the velocity and temperature fields close to the inlet jet, allowing a better thermal stratification. Also the suitable choice of the inlet jet position allowed the formation of a more effective thermal stratification. Some other aspects of the internal dynamics of this kind of storage tank are presented and discussed. For the cases studied, the inlet jet next to the top led to a greater thermal stratification. However, it was verified that when the inlet jet temperature remains constant for a long period of time, and thus its temperature approaches the temperature of the water inside the tank, for the same height, the temperature profiles obtained become similar to the case of the inlet located at usual height of 2/3 of the diameter.  相似文献   

13.
This paper presents Unsteady Reynolds Averaged Navier Stokes (URANS) simulations of a large bore, hydrogen-fuelled direct injection spark ignition (DISI) engine at different spark and start of injection (SOI) timings. Six cases are simulated, including three with various spark timings at a low boost level and three with advanced to late injection timings at a higher boost level. The numerical simulations are validated with experimental data for four out of six cases, while the other two are considered blind computational fluid dynamics (CFD) simulations. It is shown that the autoignition occurs with advanced spark timing due to high in-cylinder pressure and unburnt temperature. For different SOIs, it is demonstrated that flame propagation involves a spark-initiated flame combined with an autoignition generated flame. The case with the late injection timing features poor mixing and slower combustion due to the presence of lean mixtures near the spark plug. As a result, this case features the lowest thermal efficiency when SOI is varied. In all cases, both mixture and temperature stratification are present. Simulations of zero-dimensional chemical reactors demonstrate that this stratification must be correctly captured for accurate prediction of autoignition timing.  相似文献   

14.
This paper reviews different methods that have been proposed to characterize thermal stratification in energy storages from a theoretical point of view. Specifically, this paper focuses on the methods that can be used to determine the ability of a storage to promote and maintain stratification during charging, storing and discharging, and represent this ability with a single numerical value in terms of a stratification efficiency for a given experiment or under given boundary conditions. Existing methods for calculating stratification efficiencies have been applied to hypothetical storage processes of charging, discharging and storing, and compared with the rate of entropy production caused by mixing calculated for the same experiments. The results depict that only one of the applied methods is in qualitative agreement with the rate of entropy production, however, none of the applied methods is in agreement with the rate of entropy production and also able to distinguish between the entropy production caused by mixing and the entropy changes due to heat losses.  相似文献   

15.
Molten-salt thermocline tanks are a low-cost option for thermal energy storage in concentrating solar power systems. A review of previous experimental and numerical thermocline tank studies is performed to identify key issues associated with tank design and performance. Published models have shown that tank discharge performance improves with both larger tank height and smaller internal filler diameter due to increased thermal stratification and sustained outflow of molten salt with high thermal quality. For well-insulated (adiabatic) tanks, low molten-salt flow rates reduce the axial extent of the heat-exchange region and increase discharge efficiency. Under nonadiabatic conditions, low flow rates become detrimental to stratification due to the development of fluid recirculation zones inside the tank. For such tanks, higher flow rates reduce molten-salt residence time inside the tank and improve discharge efficiency. Despite the economic advantages of a thermocline tank, thermal ratcheting of the tank wall remains a significant design concern. The potential for thermal ratcheting is reduced through the inclusion of an internal thermal insulation layer between the molten salt and tank wall to diminish temperature oscillations along the tank wall. Future research directions are also pointed out, including combined analyses that consider the solar receiver and power generation blocks as well as optimization between performance and economic considerations.  相似文献   

16.
The thermal behaviour of a horizontal cylindrical storage tank has been investigated both experimentally and numerically. Four sets of experiments have been carried out where cold water is injected into the bottom of the tank with three different initial thermal fields. The first one is the tank with initial thermal stratification with bottom temperature the same as the inflow temperature. The second set is the tank with the initial thermal stratification, the bottom being at a relatively higher temperature than the inflow temperature. The third set is an initially heated isothermal tank and the fourth is the same as the first set of experiments except that the straight tube inlet nozzle is replaced by a 30° downward bent divergent conical tube. The above experiments show that better thermal stratification can be obtained using the divergent conical tube as the inlet nozzle due to the diffusion effect of the nozzle. Also a slight improvement in the tank performance has been achieved in the second set of experiments when the initial bottom temperature of the tank is higher than the injected cold water temperature. To check the accuracy of the experimental results two different types of one-dimensional numerical models, namely Turbulent Mixing Model and Displacement Mixing Model have been developed and the results are compared with the experiments. This comparison indicates that the numerical results are in good agreement with the experiments especially at the top of the tank.  相似文献   

17.
A computational model of the transient thermal response of a packed bed of spheres containing a phase-change material (PCM) is presented. A one-dimensional separate phases formulation is used to develop a numerical analysis of the dynamic response of the bed which is subject to the flow of a heat transfer fluid, for arbitrary initial conditions and inlet fluid temperature temporal variations. Phase-change models are developed for both isothermal and nonisothermal melting behaviours. Axial thermal dispersion effects are modelled, including intraparticle conduction (Biot number) effects. Regenerative thermal storage applications involve flow reversals to recover the stored energy; this aspect of operation is included in the present model. Results from the model for a commercial sized thermal storage bed for both the energy storage and recovery periods are presented. Experimental measurements of transient temperature distributions in a randomly packed bed of uniform spheres containing a PCM for a step-change in inlet air temperature are reported for a range of Reynolds number.  相似文献   

18.
A very small oil-in-glass tube thermal energy storage (TES) system is designed to allow for rapid heat transfer experiments. An electrical hot plate in thermal contact with a steel spiral coil (SSC) is used to charge the TES system under different hot plate temperatures and under different average charging flow rates. Thermal performance during charging is presented in terms of the axial temperature distribution, the axial degree of thermal stratification, the total energy stored and the total exergy stored. The energy and exergy delivery rates of the energy delivery device (EDD) are also evaluated in relation to the thermal performance of the storage system. Results of charging the storage system under different hot plate temperatures indicate that there is an optimal charging temperature for optimal thermal performance. The results also indicate that exceeding this optimal temperature leads to a degradation of the thermal performance due to increased heat losses. Charging at the same temperature conditions under different flow rate regimes suggests that there is an optimal charging flow rate. This optimal flow rate is a compromise between achieving a greater heat transfer rate in the EDD and achieving a greater degree of thermal stratification in the TES system.  相似文献   

19.
A study of convective heat transfer in a cryogenic storage vessel is carried out numerically and experimentally. A scaled down model study is performed using water as the model fluid in a rectangular glass tank heated from the sides. The convective flow and the resulting thermal stratification phenomenon in the rectangular tank are studied through flow visualization, temperature measurement, and corresponding numerical simulations. It is found that a vortex-like flow near the top surface leads to a well-mixed region there, below which the fluid is thermally stratified. In addition, in an attempt to simulate the actual conditions, a numerical study is performed on a cylindrical cavity filled with liquid hydrogen (LH2) and heated from the sides. The results are compared with our model study with water, and the qualitative agreement is found to be good.  相似文献   

20.
The growing desire to find alternate energy sources to meet the ever-increasing energy demands of mankind has led to extensive research in the field of solar energy. Energy devices working on solar energy need energy storage subsystems because of the intermittent nature of solar radiation. Thermal energy storage systems which keep the warm and cold water separated by means of gravitational stratification have been found to be attractive in low and medium temperature thermal storage applications due to their simplicity and low cost. Experimental investigations have been carried out on scaled model storage tanks of various materials and wall thickness to study their effect on the stratification. It has been found that degradation of thermoclines is slower for tanks whose walls have a higher thermal resistance.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号