Holographic optical receiver front end for wireless infrared indoor communications

Multispot diffuse configuration (MSDC) for indoor wireless optical communications, utilizing multibeam transmitter and angle diversity detection, is one of the most promising ways of achieving high capacities for use in high-bandwidth islands such as classrooms, hotel lobbies, shopping malls, and train stations. Typically, the optical front end of the receiver consists of an optical concentrator to increase the received optical signal power and an optical bandpass filter to reject the ambient light. Using the unique properties of holographic optical elements (HOE), we propose a novel design for the receiver optical subsystem used in MSDC. With a holographic curved mirror as an optical front end, the receiver would achieve more than an 10-dB improvement in the electrical signal-to-noise ratio compared with a bare photodetector. Features such as multifunctionality of the HOE and the receiver's small size, light weight, and low cost make the receiver front end a promising candidate for a user's portable equipment in broadband indoor wireless multimedia access.     

Holographic interference filters for infrared communications

We demonstrate that high-quality interference filters for the wavelength range 1300-1600 nm can be holographically fabricated in DuPont HRF-800X001 photopolymer material by use of visible laser illumination. We also summarize a chain-matrix technique, which we call thin-film decomposition, that is useful for modeling multilayer films with an arbitrary index profile n(z). We use the thin-film-decomposition technique to create design curves that allow one to choose the proper exposure angle and film thickness with which to fabricate a holographic interference filter with a desired transmission efficiency and bandwidth at a particular wavelength. These curves are of general utility and are not confined to any particular holographic recording medium. Excellent agreement between theory and experiment is found.     

Low-complexity iterative equalisation and decoding for wireless optical communications [optical wireless communications]

A low-complexity scheme of iterative equalisation and decoding by combining a recursive systematic convolutional code and a pulse-position modulation is proposed here. A graph- based equalisation for intersymbol interference (ISI) known at both transmitter and receiver is considered. By representing the memory channel with ISI as the factor graph and applying sum-product (SP) algorithm to this graph, a posteriori probability (APP) of the desired symbol necessary to implement iterative equalisation and decoding is derived. A partial response precoding is used to reduce the span of ISI from a possible infinite number of two baud periods. This precoding scheme makes the factor graph of memory channel cycle-free, and SP algorithm for combating ISI converges to an optimum detection. Numerical results show that the proposed low-complexity strategy has almost the same performance as the optimum turbo equalisation.     

Link design for nondirected wireless infrared communications

We optimize the design of a short-range communication system using nondirected line-of-sight IR radiation. We propose a receiver structure comprising a spherical thin-film optical filter and a truncated spherical lens that can significantly outperform an optimized planar-filter system. We can make the passband of the spherical filter arbitrarily narrow without constraining the field of view by using an arbitrarily large filter radius. We argue that a truncation angle of 90° maximizes the receiver field of view when a spherical filter is used. We jointly optimize the transmitter radiation pattern and receiver optical components. Numerical results show that 269 mW of transmitted signal power is sufficient to achieve 100 Mbit/s throughout a 4-m-radius cell with high background irradiance.     

Look-up table error correcting multiple pulse PPM codes for wireless optical communication channels [optical wireless communications]

Performance of optical wireless communication (OWC) systems can be optimised using constant optical power transmission in conjunction with forward error control coding. A new family of constant power error correcting codes using multiple pulse position modulation optical transmission are introduced. This doubly featured technique may extend the capability of many difficult wireless optical links beyond their existing barriers and may enable a higher error performance for OWC networks. The potential and design of look-up table codes are investigated. The Monte Carlo methods provide supportive data for the performance and code word search.     

Multi-user adaptive orthogonal frequency-division multiplexing system for indoor wireless optical communications

An adaptive orthogonal frequency-division multiplexing (OFDM) system is proposed for multi-user communications over indoor wireless optical channels. The designed system uses multi-user least-squares detection techniques applied to space-division multiple access and OFDM schemes, in conjunction with angle-diversity reception. The system, which does not present an excessive increase in complexity with respect to the previous schemes, can support high bit rates for multiple users, beyond 100 Mbits/s. It also mitigates the channel fluctuations induced when either the space distribution or the number of emitters and receivers varies. The performance of the new proposed scheme is compared with that of a non-adaptive multi-user system and an adaptive single-user system, both described in the previous works, when they face similar environmental situations. The obtained results show a significant enhancement with respect to both the previous multi-user system and the adaptive single-user one, since the new scheme allows adaptively managing the system throughput on a multi-user environment     

Adaptive code-division multiple-access system for communications over indoor wireless optical channels based on random optical codes

The authors have designed an adaptive optical codes-based system for communications over the indoor wireless optical channel when large numbers of users access to the channel simultaneously. This system uses a code-division multiple access (CDMA) scheme based on the named random optical codes (ROC). The authors present the characteristics of this kind of optical codes and several results about its performance over noisy indoor wireless optical channels. Finally, the authors describe a CDMA system which adapts its performance to the number of users which are accessing simultaneously to the channel. The proposed system is able to maintain a target bit error rate adapting its data throughput independently of the number of simultaneous users in the optical environment, whenever certain conditions are accomplished.     

Evaluation of coverage area for a wide line-of-sight indoor optical free-space communication system employing coherent detection [optical wireless communications]

The application of coherent detection to indoor optical free-space communications is considered here. Analytical expressions are derived for a wide line-of-sight (W-LOS) optical link which determine the coverage area and the required photo-detection area given different binary digital transmission schemes and a given bit rate. The coverage area is maximised for systems using both metal-semiconductor-metal (MSM) and PIN photo-detectors. Results show that MSM photo-detectors, due to their inherently lower capacitance per unit photo-detection area, result in a greater coverage area than their PIN counterparts. To demonstrate the viability of implementing coherent detection indoors, a 200 Mb/s LOS optical link which uses coherent detection is also reported.     

Atmospheric-turbulence-induced power-fade statistics for a multiaperture optical receiver

To estimate the probability distributions of power fades, we consider two basic types of disturbance in electromagnetic wave propagation through atmospheric turbulence: wave-front intensity fluctuations and wave-front distortion. We assess the reduction in the cumulative probability of losses caused by these two effects through spatial diversity by using a multiaperture receiver configuration. Degradations in receiver performance are determined with fractal techniques used to simulate the turbulence-induced wave-front phase distortion, and a log normal model is assumed for the collected power fluctuations.     

Design and evaluation of a high data rate optical wireless system for the diffuse indoor channel using barker spreading codes and RAKE reception [optical wireless communications]

The performance of a high data rate optical wireless system (OWS) over the diffuse indoor infrared channel based on direct sequence spread spectrum (DSSS) techniques is highly sensitive to the properties of the aperiodic autocorrelation function and the spreading factor of the spreading sequence used. Ideally, the aperiodic autocorrelation function should have zero sidelobes in order to eliminate intersymbol interference caused by multipath propagation. In practice, such an ideal sequence does not exist in the binary field when data modulation is applied. For high data rates, a small spreading factor is desired in order to avoid an excessive system bandwidth. The family of Barker sequences is investigated in a DSSS-OWS. The Barker sequences are binary spreading sequences which exhibit small aperiodic autocorrelation values and short spreading factors. The system bit error rate (BER) performance is characterized on the diffuse indoor infrared channel when using RAKE reception. Results of BER against Eh/NQ are presented with data rate and spreading factor as parameters. The results demonstrate that of the seven Barker sequences existing, the length three Barker sequence {0 0 1} provides the best system design trade-off in respect of good BER performance and low implementation complexity.     

A new experimental approach to second-order polarization mode dispersion analysis for optical communications systems

This article analyzes the polarization mode dispersion (PMD) in optical fibers and presents a new approach for its measurement. This approach permits the combined analysis of the first-order PMD and the second-order polarization mode dispersion (SOPMD) in optical systems for different values of temperature. The relation between SOPMD and the differential group delay (DGD) in a single-mode fiber is discussed. The analysis is based on time/wavelength and temperature variations changing/impacting PMD and DGD measured values. We present long-term statistical characteristics of SOPMD acquired by a PMD emulator constructed with some pieces of high birefringence fiber, and the correlation between the SOPMD, depolarization (Depol) and polarization-dependent chromatic dispersion (PCD) was investigated. A new interpretation of SOPMD is presented to analyze the problem of the temperature spectral stability. The actual techniques for SOPMD determination, consequently Depol and PCD, use the variation with time and/or wavelength. In some studies, the results obtained for SOPMD are correlated to first-order PMD. We demonstrate experimentally that the temperature is an important factor for the correlation between SOPMD and PMD and cannot be neglected in the optimization of high-speed optical communications links.     

Performance of an optical wireless communication system as a function of wavelength

Optical wireless communication (OWC) is gaining acceptance in an increasing number of sectors of science and industry, owing to its unique combination of features: extremely high bandwidth, rapid deployment time, license- and tariff-free bandwidth allocation, and low power consumption, weight, and size. However, the major drawback of OWC in terrestrial applications is the threat of downtime caused by adverse weather conditions, such as fog and haze. Several researchers have proposed and developed communication systems that use far-IR radiation to mitigate weather effects. In this study we analyze the performance of a short-distance terrestrial OWC system as a function of wavelength. A mathematical model for OWC link performance is derived. Using this model, we perform a simulation of our system under different weather conditions. From the results of our calculations, the improvement of link availability for 10 microm compared with 0.785-1.55 microm for a distance of 1-km propagation is 0.2% (99.6-99.8%). This modest improvement should be considered relative to the complexity and cost of quantum cascade laser transmitters and far-IR receivers.     

一种新型光学传感器的理论和实验研究

当多孔硅处于有机物蒸汽环境时,由于自身的多孔结构和巨大的比表面积,有机物蒸汽分子将迅速地吸附到多孔硅的表面,并在多孔硅的孔内发生毛细冷凝作用,这将引起多孔硅层有效折射率的变化,从而导致多孔硅微腔反射谱透射峰峰位的变化.本文主要利用Bruggeman介电常数近似理论与光子晶体传输矩阵的方法,建立了多孔硅微腔的理论传感模型.使用光学实验装置对多孔硅微腔进行了传感实验,证明多孔硅微腔可以实现对有机物蒸汽分子种类的检测,且分辨率较高,响应时间和恢复时间短,可重复性好.     

Straightness measurements with a reflection confocal optical system-an experimental study

Straightness measurement is an important technique in the field of mechanical engineering. We previously proposed a novel optical method for measuring straightness of motion using reflection confocal optics. The advantage of this method in comparison with the transmission optical systems of others [Opt. Laser Technol. 6, 166 (1974)] is that the lateral displacements in the two axes perpendicular to the optical axis and the rotation angles around all three axes can be measured simultaneously. We demonstrate straightness measurements using reflection confocal optics and show these measurements to be in good agreement with the theory.     

Evaluation of disseminated candidiasis on an experimental animal model: a fourier transform infrared study

Invasive candidiasis, defined as candidemia and disseminated candidiasis, is the most common fungal infection in hospitalized patients. In the current study, we used Fourier transform infrared (FT-IR) spectroscopy as a rapid, non-perturbing technique to investigate the effects of disseminated candidiasis on mouse liver tissues at the molecular level. The results revealed that the infection caused compositional changes in the tissues by decreasing the lipid content and the ratio of the saturated lipids to unsaturated lipids. An increase in the lipid/protein ratio was also observed. In addition, investigation of the olefinic band at 3014 cm(-1) showed that lipid peroxidation took place in the infected samples. These results indicate that FT-IR spectroscopy is a promising technique for the evaluation and diagnosis of disseminated candidiasis.     

An optical system and technique for position testing of segments of the compound parabolic mirror of the radio telescope of the millimetron space observatory

An optical system and technique for position testing of segments of the compound parabolic mirror of the telescope of the Millimetron space observatory are proposed. Results of an analysis of the testing precision assured by the proposed technique are presented and recommendations for practical implementation of the technique are given. Translated from Izmeritel’naya Tekhnika, No. 5, pp. 29–31, May, 2008.