朗奇光栅法检测自由曲面镜片光焦度

随着以渐进多焦镜片为代表的自由曲面加工技术的出现,传统的光焦度计已经不能满足对于这些镜片的光焦度测量.本文给出了采用朗奇光栅法检测自由曲面眼镜片光焦度的光路结构,并详细介绍了其测量原理.通过光线追迹,对该方法进行了模拟仿真,分析了核心器件朗奇光栅的间距对于测量精度的影响.     

Automatic processing in moiré deflectometry by local fringe direction calculation

An algorithm for accurately extracting the local fringe direction is presented. The algorithm estimates, in the neighborhood of n x n points, the direction of the gradient that points normal to the local fringe direction. The performance of four different derivative kernels is also compared. Since this method is sensitive to noise and variations in background and amplitude, a preprocessing step is used to limit these error sources. The method has been applied to the moiré deflectogram of a spherical and a progressive addition ophthalmic lens, resulting in a map of the refractive power of these lenses. The results are compared with the data obtained with a commercial focimeter. This technique is useful for analyzing the fringe patterns where the fringe direction is variable and must be obtained locally.     

图像处理在MDT测量镜片屈光度中的应用

从莫尔偏折技术(MDT)测量镜片屈光度的原理出发,给出了镜片屈光度与莫尔条纹倾角的关系式.进行了实验采集,获取了MDT实测镜片屈光度的莫尔条纹图.然后,基于莫尔条纹图像的特点,采用合适的图像处理算法对实测镜片的莫尔条纹图进行了灰度均匀化、降噪、图像增强、细化等一系列的数字图像处理操作,得到了镜片测量中莫尔条纹图形的清晰轮廓线.最后,给出了不同镜片屈光度的MDT测量结果,并与焦度计的测量结果进行了比较.结果表明,莫尔偏折技术结合数字图像处理用于测量镜片的屈光度时,具有很高的测量精度.     

Calculation of optical imbalances in ophthalmic lenses using a new algorithm based on the local dioptric power matrix formalism.

We present a new algorithm to calculate the optical imbalances and differential prismatic effects that appear when two eyes look at an object through correcting eyeglasses. These are important magnitudes in ophthalmic optics because large amounts of them will disturb the binocular vision of the spectacle wearer. As a practical application of our algorithm, the distribution of optical imbalances and differential prismatic powers for a pair of progressive addition lenses has been calculated, and we obtain information about the effects of this kind of lens on the binocular vision of the wearer.     

Modified point diffraction interferometer for inspection and evaluation of ophthalmic components

We demonstrate that a modified point diffraction interferometer can be used to measure the power distribution of different kinds of ophthalmic lenses such as spectacles, rigid and soft contact lenses, progressive lenses, etc. The relationship between the shape of the fringes and the power characteristics of the component being tested is simple and makes the design a very convenient and robust tool for inspection or quality control. Some simulations based on the Fresnel approximation are included.     

Optical characterization of ophthalmic lenses by means of modulation transfer function determination from a laser speckle pattern

A method is presented for measuring the modulation transfer function of ophthalmic lenses by use of the generation of laser speckle with an integrating sphere. The measurements are performed with a rectangular double-slit aperture positioned at the output port of the integrating sphere. The distance between the lens and the detector determines the spatial frequency being tested; therefore high frequencies are tested close to the lens and low frequencies are tested far away from the lens. We can conclude that the double-slit method can be a versatile technique for comparing the optical quality of ophthalmic lenses from different makers.     

Accurate and precise optical testing with a differential Hartmann wavefront sensor

A novel differential Hartmann sensor is described. It can be used to determine the characteristics of an optic accurately, precisely, and simply without detailed knowledge of the wavefront used to illuminate the optical system or of the geometry of the measurement system. We demonstrate the application of this sensor to both zonal and modal optical testing of lenses. We also describe a dual-camera implementation of the sensor that would enable high-speed optical testing.     

Hartmann test modification for measuring ophthalmic progressive lenses

We describe a modified verion of the Hartmann test in which the pattern of the holes is replaced with a circular scanning laser beam. A position-sensitive detector is used to acquire the coordinates of the deflected beam. Significant data are obtained when the Fourier transform of the detector output signals is considered. Application of this test method to the mapping of optical parameters of ophthalmic progressive addition lenses is presented. Prismatic deviation, spherical power, and astigmatism are measured with appropriate accuracy.     

Designing lenses to correct peripheral refractive errors of the eye.

The purpose of this work was to design ophthalmic lenses that correct peripheral refractive errors of human eyes along a meridian. We designed lenses with the tangential section of one surface based on a figured spheroid but figured in the tangential section only. The curvature of the sagittal section of this surface was adjusted separately. A merit function was used to modify these surfaces until the lenses had power errors that corrected the eye. Examples are presented of lenses that correct a schematic eye. They do excellent jobs of correcting the peripheral power errors of the eye and are relatively insensitive to small changes in fitting distance. We conclude that it is theoretically feasible to design lenses to correct peripheral refractive errors.     

Designing an optical disk lens without analytical definition of aspheric surfaces

We have developed a new method to design aspheric lenses. The conventional technique is usually based on analytic definition of optical surfaces; in the new method discretely defined aspheres are used, and the final design is attained point by point with an iterative algorithm. Simulation results are compared with results obtained with conventional optical design software to prove that this new method is more effective and reliable for designing aspheric lenses, especially when the aspheric order is high.     

Serial transform optical correlator design principles

Optical correlators such as the 4f and VanderLugt optical systems have been an active area of research for many years; we refer to these types of optical system collectively as serial transform correlators (STCs). Despite being well known, misconceptions regarding the design of STCs are not uncommon. We show, for example, that one correlator configuration reported to suffer from a phase curvature problem in fact works correctly. We present and prove a simple set of rules to follow in the selection of a STC design that does not contain unnecessary constraints and that makes it easier to identify permissible optical systems. As examples, we discuss three representative types of correlator configuration, one of which is discussed in detail to highlight its practical advantages. A novel proof of the design rules is presented that does not depend on details such as what lenses or combination of lenses are used, what their focal lengths are, or what their locations are within the optical system. We also present a conventional Fourier optics proof.     

Achromatic fourier processor with holographic optical lenses

An optical Fourier processor that allows the use of broadband light sources and colored inputs is designed, fabricated, and tested. We develop a design technique based on phase manipulation in the Fourier plane to construct an image processor that provides a chromatically corrected image making use of the good aberrations behavior of symmetrical optical systems. Only a small number of diffractive lenses and one achromatic refractive lens are required to obtain a real image. We verify our design experimentally using holographic lenses, which are presented, owing to their versatility, as a good alternative to expensive blazed diffractive elements.     

Refractive index variation in compression molding of precision glass optical components

Compression molding of glass optical components is a high volume near net-shape precision fabrication method. In a compression molding process, a variation of the refractive index occurs along the radial direction of the glass component due to thermal treatment. The variation of refractive index is an important parameter that can affect the performance of optical lenses, especially lenses used for high precision optical systems. Refractive index variations in molded glass lenses under different cooling conditions were investigated using both an experimental approach and a numerical simulation. Specifically, refractive index variations inside molded glass lenses were evaluated by measuring optical wavefront variations with a Shack-Hartmann sensor system. The measured refractive index variations of the molded glass lenses were compared with the numerical simulation as a validation of the modeling approach.     

Diffractive optical elements with modulated zone sizes

Abstract

The standard design for phase-only diffractive optical elements comprises a transformation of the continuous phase function into a surface relief by means of wrapping the phase into regular intervals of M2π. This results in a structure with diffractive zones aligned in a horizontal plane. We present an alternative design concept with modulated zone sizes leading to non-periodic boundary positions and non-aligned surface structures. The diffractive properties are compared to those of conventional diffractive optical elements. It can be shown that they are fully equivalent for the design wavelength, but exhibit a different spectral behaviour for deviating wavelengths. These properties are exploited for the improvement of the optical performance of blazed gratings and diffractive lenses under conditions of deviating wavelengths. Special emphasis is put on the optimization of the ratio between diffractive efficiencies of the design order and other orders for blazed gratings and focusing diffractive lenses, as well as the suppression of interference effects within Gaussian beams collimated with diffractive lenses.     

Localized measurement of the optical thickness of a transparent window: application to the study of the photosensitivity of organic polymers

The development of an optical setup that permits us to carry out high-resolution mappings of the absolute optical thickness of plane-parallel transparent windows is described. This measurement is based on the recording and processing of the spectral transmission of the wafer between 1,520 and 1,570 nm and has a relative precision better than 10(-6). Hence it is used for the characterization of the photosensitivity of two organic photopolymers (cationic ring opening polymer and poly(methylmethacrylate)). The refractive index change dynamics for both materials and the spontaneous evolution of the optical thickness are demonstrated.     

配装眼镜国家标准之检测应用

本文介绍了GB13511-1999《配装眼镜》国家标准、GB10810-1996《眼镜镜片》国家标准在对配装眼镜质量控制中的应用,详细讲述如何使用足够精度、经国家法定计量部门检定合格并在有效期内的焦度计及瞳距尺,对加工制作完成后的配装眼镜五项技术指标进行检测及判断,以确定眼镜是否合格的方法及实例。     

Application of nonperiodic phase structures in optical systems

Wide, nonperiodic stepped phase structures are studied to correct various parameter-dependent wave-front aberrations in optical systems. The wide nature of these phase structures makes them easy to manufacture with sufficient compensation of the wave-front aberrations. Wave-front aberration correction for both continuous and discrete parameter variations are studied. An analytical method is derived for the discrete parameter variations to find the optimal phase structure. Both theoretical and experimental results show that these nonperiodic phase structures can be used to make (1) lenses athermal (defocus and spherical aberration compensated), (2) lenses achromatic, (3) lenses with a large field of view, (4) lenses with a reduced field curvature, and (5) digital versatile disk objective lenses for optical recording that are compatible with compact disk readout.     

Inline‐Beschichtung von optischen Substraten. Inline coating of optical substrates

Applications of optical technologies like vision care, digital imaging or data communication play a decisive role in our daily life. Manipulation of light is mainly done using optical lenses. Beside mineral lenses, transparent plastic materials become more and more important. The optical and mechanical properties of lenses are crucially improved by high‐quality coatings. These includes primarily anti‐reflective coatings to enhance light transmission, hard coats to improve scratch resistance of the sensitive plastic substrates and finally clean coats to inhibit dusting of the lenses and to ease cleaning. In the following we present modern vacuum coating technologies for industrial refinement of optical substrates. The focal point is set to the coating of plastic eyeglass lenses using a revolutionary inline technology. On one hand the technology merges all coating steps in a fully automated system and enables on the other hand the flexible combination of different layer stacks necessary for RX‐production of ophthalmic lenses. This inline technology is available by the coating system OPTICUS. The design of the OPTICUS is described in the last chapter.     

Laser damage thresholds of optical coatings

Since the very beginning of laser technology, Laser Induced Damage Thresholds (LIDT) of optical components were always an obstacle for the application of laser systems operating at high power levels. Also, further progresses in the development of new high power laser concepts are often directly limited by the availability of advanced optical components with high quality and LIDT-values. Nowadays, in the course of the development of optical materials with excellent quality and power handling capability, the problem of laser induced damage has shifted from the bulk to the surface of the optical component. The optical surface is objected to various production steps and environmental influences, which modify its structure and composition. Especially, the thin film coating, which is deposited on the optical surface to adapt its reflectance and transmittance to the application, contributes predominantly to the reduction of the LIDT-values. As a consequence, the measurement and optimization of the power handling capability of thin films is considered as one of the primary research areas in modern optics technology and is supported by an extensive scientific community.In the present paper, a brief review will be given on selected fundamental damage mechanisms in thin films considering different operation conditions of modern laser systems. Also, the current standards for the measurement of LIDT will be described, and examples illustrating some practical aspects of high power optical coatings will be presented. Finally, recent trends in laser technology will be discussed in respect to research in laser induced damage.     

Components for the implementation of free-space optical crossbars

We describe an optical system developed to form the basis of a 64 × 64 free-space optical matrix-matrix crossbar switch. The design and performance of each of the main optical components is discussed: lenses, diffractive optical elements, and polarizing beamsplitters, together with the optomechanical hardware design. For these components, throughput levels of -6.9 dB have been achieved, which is compatible with full system operation at 10(-12) bit error rates at ≥270 Mbits s(-1).