Optical characteristics of organic light emitting diode with IrQ(ppy)2-5Cl and its emitter

The synthesis and photophysical study of a cyclometalated mixed-ligand iridium(III) complex are reported. The iridium complex (called IrQ(ppy)₂-5Cl) has two cyclometalated 2-phenylpyridine (ppy) ligands and one 8-hydroxyquinoline (Q) ligand, where one of the H atom is substituted by Cl atom. Absorption and photoluminescence spectra are studied for the neat film and films of IrQ(ppy)₂-5Cl doped in 4,4′-N,N′-dicarbazole-biphenyl and polystyrene, together with the electroluminescence spectra using multi-layer light emitting devices. The electronic states are studied using density functional theory calculations. Emission bands are observed at 502 and 666 nm, which arise from ppy and Q ligands, respectively.     

Characterisation of blends between poly(ε-caprolactone) and polysaccharides for tissue engineering applications

In this work, bioartificial binary blends between poly(ε-caprolactone) (PCL) and a polysaccharide (chitosan (CS) or starch (S)) with different contents of the natural polymer (5–30 wt.%) were produced. Melt-mixing and double-precipitation were the methods used for the obtainment of PCL/S and PCL/CS blends, respectively. Tubular scaffolds were produced from bioartificial blends by melt-extrusion. Physico-chemical characterisation was performed by differential scanning calorimetry analysis (DSC), thermogravimetry (TGA), scanning electron microscopy (SEM), infrared analysis (FTIR-ATR and micro-ATR mapping), atomic force microscopy (AFM) and stress–strain tests. Blends were not miscible, phase-separated systems, showing a homogeneous composition and morphology only at low polysaccharide content (≤ 10 wt.%). The biocompatibility of bioartificial guides was investigated by culturing NIH-3T3 mouse fibroblasts. Cells response showed the following order: PCL/S > PCL > PCL/CS. For each blend type, biocompatibility increased with decreasing the polysaccharide content. In vitro cell tests using S5Y5 neuroblastoma cells, carried out on the most biocompatible blends, assessed their absence of cytotoxicity towards these model cells of the nervous tissue. Results showed that blends with a low chitosan or starch content (≤ 10 wt.%) are promising for the regeneration of tissues requiring tubular scaffolds, such as the peripheral nerves.     

Preparation of composite nanofibers containing gold nanoparticles by using poly(N-vinylpyrrolidone) and β- cyclodextrin

We report a new method for preparing β-cyclodextrin/poly(N-vinylpyrrolidone) composite nanofibers containing gold nanoparticles by electrospinning. β-Cyclodextrin is mixed into fibers as a new material, and it acts as stabilized reagent and reducing reagent in the synthesis of gold nanoparticles. TEM observation confirms that the gold nanoparticles are completely encapsulated within the composite nanofibers.     

Microdisk laser emission and electrical properties of composite films based on poly(3-hexylthiophene)s with different stereoregularity

The optical and electrical properties of composite thin films of poly(3-hexylthiophene)s (PAT6s), processing different stereo-regularity originating from side-chain regio orders have been studied. The laser emission properties of PAT6 composite thin films in microdisk structure have been observed by pulsed photopumping. From the electrical and optical measurements, the electrical conductivity and the quantum efficiency of the PAT6 composite films were estimated. The emission and conductivity depending on the mixture ratios were discussed by taking the stereo-regularity of the molecular structure into consideration.     

A variationally consistent αFEM (VCαFEM) for solution bounds and nearly exact solution to solid mechanics problems using quadrilateral elements

A variationally consistent alpha finite element method (VC αFEM) for quadrilateral isoparametric elements is presented by constructing an assumed strain field in which the gradient of the compatible strain field is scaled with a free parameter α. The assumed strain field satisfies the orthogonal condition and the Hellinger–Reissner variational principle is used to establish the discretized system of equations. It is shown that the strain energy is a second‐order continuous function of α, and the VC αFEM can produce both lower and upper bounds to the exact solution in the strain energy for all elasticity problems by choosing a proper α∈[0, α_upper]. Based on this bound property, an exact‐α approach has been devised to give an ultra‐accurate solution that is very close to the exact one in the strain energy. Furthermore, the exact‐α approach also works well for volumetric locking problems, by simply replacing the strain gradient matrix by a stabilization matrix. In addition, a regularization‐α approach has also been suggested to overcome possible hourglass instability. Intensive numerical studies have been conducted to confirm the properties of the present VC αFEM, and a very good performance has been found in comparing to a large number of existing FEM models. Copyright © 2010 John Wiley & Sons, Ltd.     

Nanowire‐Seeded Growth of Single‐Crystalline (010) β‐Ga2O3 Nanosheets with High Field‐Effect Electron Mobility and On/Off Current Ratio

2D β‐Ga₂O₃ nanosheets, as fundamental materials, have great potential in next generations of ultraviolet transparent electrodes, high‐temperature gas sensors, solar‐blind photodetectors, and power devices, while their synthesis and growth with high crystalline quality and well‐controlled orientation have not been reported yet. The present study demonstrates how to grow single‐crystalline ultrathin quasi‐hexagonal β‐Ga₂O₃ nanosheets with nanowire seeds and proposes a hierarchy‐oriented growth mechanism. The hierarchy‐oriented growth is initiated by epitaxial growth of a single‐crystalline $(\stackrel{?}{2}01)$β‐Ga₂O₃ nanowire on a GaN nanocrystal and followed by homoepitaxial growth of quasi‐hexagonal (010) β‐Ga₂O₃ nanosheets. The undoped 2D (010) β‐Ga₂O₃ nanosheet field effect transistor has a field‐effect electron mobility of 38 cm² V^?1 s^?1 and an on/off current ratio of 10⁷ with an average subthreshold swing of 150 mV dec^?1. The from‐nanowires‐to‐nanosheets technique paves a novel way to fabricate nanosheets, which has great impact on the field of nanomaterial synthesis and growth and the area of nanoelectronics as well.     

α‐Ni(OH)2 Originated from Electro‐Oxidation of NiSe2 Supported by Carbon Nanoarray on Carbon Cloth for Efficient Water Oxidation

Development of effective oxygen evolution reaction (OER) electrocatalysts has been intensively studied to improve water splitting efficiency and cost effectiveness in the last ten years. However, it is a big challenge to obtain highly efficient and durable OER electrocatalysts with overpotentials below 200 mV at 10 mA cm^?2 despite the efforts made to date. In this work, the successful synthesis of supersmall α‐Ni(OH)₂ is reported through electro‐oxidation of NiSe₂ loaded onto carbon nanoarrays. The obtained α‐Ni(OH)₂ shows excellent activity and long‐term stability for OER, with an overpotential of only 190 mV at the current density of 10 mA cm^?2, which represents a highly efficient OER electrocatalyst. The excellent activity could be ascribed to the large electrochemical surface area provided by the carbon nanoarray, as well as the supersmall size (≈10 nm) of α‐Ni(OH)₂ which possess a large number of active sites for the reaction. In addition, the phase evolution of α‐Ni(OH)₂ from NiSe₂ during the electro‐oxidation process was monitored with in situ X‐ray absorption fine structure (XAFS) analysis.     

Core–Shell Structure and Interaction Mechanism of γ‐MnO2 Coated Sulfur for Improved Lithium‐Sulfur Batteries

Lithium‐sulfur batteries have attracted worldwide interest due to their high theoretical capacity of 1672 mAh g^?1 and low cost. However, the practical applications are hampered by capacity decay, mainly attributed to the polysulfide shuttle. Here, the authors have fabricated a solid core–shell γ‐MnO₂‐coated sulfur nanocomposite through the redox reaction between KMnO₄ and MnSO₄. The multifunctional MnO₂ shell facilitates electron and Li⁺ transport as well as efficiently prevents polysulfide dissolution via physical confinement and chemical interaction. Moreover, the γ‐MnO₂ crystallographic form also provides one‐dimensional (1D) tunnels for the Li⁺ incorporation to alleviate insoluble Li₂S₂/Li₂S deposition at high discharge rate. More importantly, the MnO₂ phase transformation to Mn₃O₄ occurs during the redox reaction between polysulfides and γ‐MnO₂ is first thoroughly investigated. The S@γ‐MnO₂ composite exhibits a good capacity retention of 82% after 300 cycles (0.5 C) and a fade rate of 0.07% per cycle over 600 cycles (1 C). The degradation mechanism can probably be elucidated that the decomposition of the surface Mn₃O₄ phase is the cause of polysulfide dissolution. The recent work thus sheds new light on the hitherto unknown surface interaction mechanism and the degradation mechanism of Li‐S cells.     

Green Fabrication of Amphiphilic Quaternized β‐Chitin Derivatives with Excellent Biocompatibility and Antibacterial Activities for Wound Healing

Bacterial infection has always been a great threat to public health, and new antimicrobials to combat it are urgently needed. Here, a series of quaternized β‐chitin derivatives is prepared simply and homogeneously in an aqueous KOH/urea solution, which is a high‐efficiency, energy‐saving, and “green” route for the modification of chitin. The mild reaction conditions keep the acetamido groups of β‐chitin intact and introduce quaternary ammonium groups on the primary hydroxyl at the C‐6 position of the chitin backbone, allowing the quaternized β‐chitin derivatives (QCs) to easily form micelles. These QCs are found to exhibit excellent antimicrobial activities against Escherichia coli, Staphylococcus aureus, Candida albicans, and Rhizopus oryzae with minimum inhibitory concentrations (MICs) of 8, 12, 60, and 40 µg mL^?1, respectively. As a specific highlight, their inherent outstanding biocompatibility and significant accelerating effects on the healing of uninfected, E. coli‐infected, and S. aureus‐infected wounds imply that these novel polysaccharide‐based materials can be used as dressings for clinical skin regeneration, particularly for infected wounds.     

Effect of Ni-modified α-Al2O3 prepared by sol–gel and solvothermal methods on the characteristics and catalytic properties of Pd/α-Al2O3 catalysts

In the present study, Ni-modified α-Al₂O₃ with Ni/Al ratios of 0.3 and 0.5 were prepared by sol–gel and solvothermal method and then were impregnated with 0.3 wt.% Pd. Due to different crystallization mechanism of the two preparation methods used, addition of nickel during preparation of α-Al₂O₃ resulted in various species such as NiAl₂O₄, mixed phases between NiAl₂O₄ and α-Al₂O₃, and mixed phases between NiAl₂O₄ and NiO. As revealed by NH₃-temperature programmed desorption, formation of NiAl₂O₄ drastically reduced acidity of alumina, hence lower amounts of coke deposited during acetylene hydrogenation was found for the Ni-modified α-Al₂O₃ supported catalysts. For any given method, ethylene selectivity was improved in the order of Pd/Ni–Al₂O₃-0.5 > Pd/Ni–Al₂O₃-0.3 > Pd/Ni–Al₂O₃-0  Pd/α–Al₂O₃-commercial. When comparing the samples prepared by different techniques, the sol–gel-made samples showed better performances than the solvothermal-derived ones.     

Hydrothermal synthesis and characterization of monodisperse α-Fe2O3 nanoparticles

Monodisperse α-Fe₂O₃ nanoparticles have been successfully prepared by hydrothermal synthetic route using FeCl₃, CH₃COONa as reagents and reacted at 200 °C for 12 h. The morphology and structure of products were characterized by powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The results showed that the α-Fe₂O₃ nanoparticles were single-crystalline hexagonal structure and average diameters were about 80 nm. Magnetic properties have been detected by a vibrating sample magnetometer at room temperature. The nanoparticles exhibited a ferromagnetic behavior with the coercive force (Hc), saturation magnetization (Ms) and remanent magnetization (Mr) was 185.28 Oe and 0.494 emu/g, 0.077 emu/g.