Decentralized supervisory controller design to avoid deadlock in Petri nets

A decentralized supervisory controller design approach, using overlapping decompositions, is proposed for discrete-event systems modelled by Petri nets to avoid deadlock. In this approach, the given original Petri net is first decomposed into overlapping Petri subnets. A controller for each disjoint Petri subnet is then designed. A controller for the expanded Petri net is next obtained by combining these controllers in a certain way. In the final phase, the controller obtained for the expanded Petri net is contracted in a certain way to obtain a controller for the original Petri net. It is proved that this final controller avoids deadlock in the original Petri net.     

信标基底的可选择性在制造系统死锁控制中的应用

本文基于Petri网模型,讨论柔性制造系统的死锁控制问题.为了建立结构简单的Petri网控制器,本文在以前的工作中提出了信标基底的概念.信标基底是一组满足特定条件的严格极小信标集合.本文证明基于不同的信标基底,建立的受控系统其容许性能也不同.而容许性是评价死锁控制策略优劣的重要标准之一.故如何选择信标基底,提高受控系统的容许性能是值得研究的问题.本文讨论了使受控系统容许性能大大提高的信标基底的选择条件.基于该条件,为柔性制造系统建立有效的死锁控制策略.最后,通过两个例子解释该条件和策略.     

Timed Petri Nets in Hybrid Systems: Stability and Supervisory Control

In this paper, timed Petri nets are used to model and control hybrid systems. Petri nets are used instead of finite automata primarily because of the advantages they offer in dealing with concurrency and complexity issues. A brief overview of existing results on hybrid systems that are based on Petri nets is first presented. A class of timed Petri nets named programmable timed Petri nets (PTPN) is then used to model hybrid systems. Using the PTPN, the stability and supervisory control of hybrid systems are addressed and efficient algorithms are introduced. In particular, we present sufficient conditions for the uniform ultimate boundness of hybrid systems composed of multiple linear time invariant plants which are switched between using a logical rule described by a Petri net. This paper also examines the supervisory control of a hybrid system in which the continuous state is transfered to a region of the state space in a way that respects safety specifications on the plant's discrete and continuous dynamics.     

一类FMS的最佳活Petri网模型的综合

利用Petri网为一类柔性制造系统建模,并讨论避免系统死锁问题.通过Petri网模 型的结构分析,证明了系统产生死锁的一个充分必要条件.给出了避免死锁的最佳控制器,它 可以通过给系统的Petri网模型增加一些新的位置与相应的弧来实现.从而导出了这类制造 系统的最佳活Petri网模型.     

SAT-Solving the Coverability Problem for Petri Nets

Net unfoldings have attracted great attention as a powerful technique for combating state space explosion in model checking, and have been applied to verification of finite state systems including 1-safe (finite) Petri nets and synchronous products of finite transition systems. Given that net unfoldings represent the state space in a distributed, implicit manner the verification algorithm is necessarily a two step process: generation of the unfolding and reasoning about it. In his seminal work McMillan (K.L. McMillan, Symbolic Model Checking. Kluwer Academic Publishers, 1993) showed that deadlock detection on unfoldings of 1-safe Petri nets is NP-complete. Since the deadlock problem on Petri nets is PSPACE-hard it is generally accepted that the two step process will yield savings (in time and space) provided the unfoldings are small.In this paper we show how unfoldings can be extended to the context of infinite-state systems. More precisely, we show how unfoldings can be constructed to represent sets of backward reachable states of unbounded Petri nets in a symbolic fashion. Furthermore, based on unfoldings, we show how to solve the coverability problem for unbounded Petri nets using a SAT-solver. Our experiments show that the use of unfoldings, in spite of the two-step process for solving coverability, has better time and space characteristics compared to a traditional reachability based implementation that considers all interleavings for solving the coverability problem.     

On systematic methods to remove redundant monitors from liveness-enforcing net supervisors

Petri nets based deadlock prevention for flexible manufacturing systems has received much attention over the past decade, primarily due to the seminal work of Ezpeleta et al. in 1995. A Petri net based deadlock prevention mechanism is usually implemented by adding monitors or control places to a plant Petri net model such that liveness can be enforced. The significance of this methodology lies in that both a plant model and its supervisor are in a same formalism-Petri nets. Due to the inherent complexity of Petri nets, in theory, the number of additional monitors that have to been added to achieve liveness-enforcement purpose for an uncontrolled plant model is exponential with respect to the size of the model. This paper first proposes a systematic method to minimize the number of additional monitors in a liveness-enforcing Petri net supervisor such that the resultant net system has the same permissive behavior while liveness can still be preserved. Furthermore, for the liveness-enforcing Petri net supervisors of flexible manufacturing systems, which have some particular property, an algorithm is developed such that more permissive liveness-enforcing Petri net supervisors can be obtained after liveness-restrictive monitor removal. Compared with the existing techniques of eliminating redundant monitors in the literature, the complete state enumeration of a supervisor is avoided, which implies the high computational efficiency of the methods in this paper. Flexible manufacturing examples are used to demonstrate the proposed approaches.     

A deadlock prevention approach for flexible manufacturing systems with uncontrollable transitions in their Petri net models

Deadlocks are a highly undesired situation in a fully automated flexible manufacturing system, whose occurrences are tied to the existence of shared resources that are competed by different production processes. In the last two decades, a fair amount of research has been done on deadlock analysis and control for flexible manufacturing systems, leading to a variety of strategies in the literature. Petri nets are a promising mathematical tool to handle deadlock problems in flexible manufacturing systems. However, most deadlock control policies based on a Petri net formalism assume that all the transitions in a plant model are controllable. However, uncontrollability of events are a natural feature in a real‐world production system. This paper proposes a deadlock prevention policy for a class of Petri nets by considering the existence of uncontrollable transitions. Deadlocks are prevented by adding monitors to a plant Petri net model, whose addition does not inhibit the firings of uncontrollable transitions. Linear programming techniques are employed to find transitions to which a monitor points in order that a more permissive liveness‐enforcing Petri net supervisor can be found. A number of manufacturing examples are used to demonstrate the proposed methods. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

自动制造系统设计和仿真中的死锁控制

通过对自动制造系统的Pctri网模型的分析．可以揭示出被模拟系统的死锁跟其初始标识和其结构有关。要想消除自动制造系统的死锁异常,可以通过修改Petri网的初始标识或Pctri网的结构来解决。该文结合具体示例,给出了具体的可操作算法并设计出了控制自动制造系统死锁的Petri网模型,从而为自动制造系统的异常处理提供了一条有效途径。     

基于Petri网的柔性制造系统一种预防死锁方法

基于Petri网的结构特性分析,研究了FMS(柔性制造系统)一种预防死锁方法.提出了 Petri网的一种特殊拓扑结构--基本信标的概念.在Petri网中基本信标的集合是SMS(严格极 小信标)集合的一个真子集.尤其在大型Petri网系统中,基本信标的集合比SMS的集合要小得 多.对于Petri网的一个子类S3PR,只对每一个基本信标添加一个库所使其不被清空,就可实现 预防死锁,也就是说无须控制S3PR的所有SMS而达到无信标被清空的目的.此外,对于S3PR, 还提出了一种求取SMS和基本信标的方法.相对于现在普遍采用的控制所有SMS来预防死锁 的策略,其具三方面优势.1)只需控制少量的SMS即所谓的基本信标.相应地,添加少量的控制 库所和连接弧,就可得到无死锁或活的Petri网.2)不需要先行计算出极小信标的集合.3)明显 地,这种方法更适合大型Petri网系统.我们通过穿插在文中的一个例子来说明这些方法.     

基于变迁覆盖的制造系统死锁控制策略

基于系统Petri网模型,研究柔性制造系统的死锁控制问题.论文利用变迁覆盖为系统设计活性控制器.变迁覆盖是由一组极大完备资源变迁回路组成的集合,其变迁集覆盖了Petri网中所有极大完备资源变迁回路的变迁集.验证变迁覆盖的有效性,然后仅对有效变迁覆盖中的极大完备资源变迁回路添加控制位置,就得到系统的活性受控Petri网.这种受控Petri网包含的控制位置个数少,从而结构相对简单.最后通过一个例子说明了所提出的死锁控制策略的构成与特点.     

自动化仓库输送调度问题的建模与控制研究

基于面向对象着色Petri网模型和时态逻辑方法,对自动化仓库输送系统运行过程的调度问题进行研究。建立了系统的面向对象着色Petri网模型,讨论了该过程的死锁分析问题,给出了系统行为的时态逻辑规范和死锁避免的最大允许反馈控制策略。     

应用必需信标的Petri网死锁预防策略

本文提出了表征一个Petri网子类,即S4R网(system of sequential systems with shared resources)中死锁问题的必需信标的概念和一种将混合整数规划算法与必需信标控制相结合的死锁预防策略.在该策略的迭代过程中,混合整数规划算法发现被控的Petri网中是否存在最大的死标识信标,若存在,则通过库所分类和迭代式的信标提取,得到必需信标,添加相应的控制库所,满足必需信标的最大可控性,从而实现被控的Petri网活性的目的.理论分析和算例验证表明了该策略的正确性和有效性.     

An Optimization Approach to Petri Net Monitor Design

This note addresses the problem of enforcing generalized mutual exclusion constraints on a Petri net plant. First, we replace the classical partition of the event set into controllable and uncontrollable events from supervisory control theory, by associating a control and observation cost to each event. This leads naturally to formulate the supervisory control problem as an optimal control problem. Monitor places which enforce the constraint are devised as a solution of an integer linear programming problem whose objective function is expressed in terms of the introduced costs. Second, we consider timed models for which the monitor choice may lead to performance optimization. If the plant net belongs to the class of mono-T-semiflow nets, we present an integer linear fractional programming approach to synthesize the optimal monitor so as to minimize the cycle time lower bound of the closed loop net. For strongly connected marked graphs the cycle time of the closed-loop net can be minimized     

实时并发离散事件系统的监控

用受控赋时Ｐｅｔｒｉ网为具有并发事件的实时离散事件系统建模，并研究了这类模型下的监控问题，给出了实现给定并发事件语言的监控器存在的充要条件和一种动态监控方法。     

On Siphon Computation for Deadlock Control in a Class of Petri Nets

As a structural object, siphons are well recognized in the analysis and control of deadlocks in resource allocation systems modeled with Petri nets. Many deadlock prevention policies characterize the deadlock behavior of the systems in terms of siphons and utilize this characterization to avoid deadlocks. This paper develops a novel methodology to find interesting siphons for deadlock control purposes in a class of Petri nets, i.e., a system of simple sequential processes with resources . Resource circuits in an are first detected, from which, in general, a small portion of emptiable minimal siphons can be derived. The remaining emptiable ones can be found by their composition. A polynomial-time algorithm for finding the set of elementary siphons is proposed, which avoids complete siphon enumeration. It is shown that a dependent siphon can always be controlled by properly supervising its elementary siphons. A computationally efficient deadlock control policy is accordingly developed. Experimental study shows the efficiency of the proposed siphon computation approach.     

面向资源Petri网的自动制造系统死锁预防

在自动制造系统(automated manufacturing systems, AMSs)中,死锁是一个急需解决的问题,其主要由资源的循环等待造成.为了解决该问题,本文首先基于面向资源Petri网(resource-oriented Petri nets, ROPNs)的特征,建立特殊资源标记图(special resource marked graphs, SRMGs).其次,在SRMGs中建立死锁与饱和回路之间的关系.最后通过为一些特殊回路添加控制器,阻止系统出现不安全标记.考虑到资源故障问题,为危险库所添加资源缓冲子网,保证需要故障资源的零件不会阻塞其他零件的持续生产.相比现有的控制器,本文的监督控制器具有控制开关,其通过实时改变控制库所的容量可以允许更多安全标记发生.     

A deadlock prevention approach for a class of timed Petri nets using elementary siphons

To solve the problem of deadlock prevention for timed Petri nets, an effective deadlock prevention policy based on elementary siphons is proposed in this paper. Without enumerating reachable markings, deadlock prevention is achieved by adding monitors for elementary siphons, increasing control depth variables when necessary, and removing implicit, liveness‐restricted and redundant control places. The final supervisor is live. First, a timed Petri net is stretched into a stretched Petri net (SPN). Unchanging the system performance, each transition in the SPN has a unit delay time. Then the siphon‐control‐based approach is applied. Monitors computed according to the marking constraints are added to the SPN model to ensure all strict minimal siphons in the net invariant‐controlled. A liveness‐enforcing supervisor with simple structure can be obtained by reverting the SPN into a TdPN. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Monitor design for colored Petri nets: An application to deadlock prevention in railway networks

In this paper we use colored Petri nets (CPN) to model the dynamics of a railway system: places represent tracks and stations, tokens are trains. Using digraph tools, deadlock situations are characterized and a strategy is established to define off-line a set of constraints that prevent deadlocks. We show that these constraints limit the weighted sum of colored tokens in subsets of places. In particular, we extend the notion of generalized mutual exclusion constraints (GMEC) to CPN and we show that the above constraints, as well as the collision avoidance constraints, can be written as colored GMEC.To solve this problem, we extend the theory of monitor places for place/transition nets to the case of CPN and we show that these constraints can be enforced by a colored monitor place that minimally restricts the behavior of the closed-loop system.     

Hierarchical reachability graph of bounded Petri nets forconcurrent-software analysis

Petri nets have been proposed as a promising tool for modeling and analyzing concurrent-software systems such as Ada programs and communication protocol software. Among analysis techniques available for Petri nets, the most general approach is to generate all possible states (markings) of the system in a form of a so-called reachability graph. However, this conventional reachability graph approach is inefficient or intractable, even for a bounded Petri net, due to state explosion in many practical applications. To cope with this problem, this paper proposes a method for constructing a hierarchically organized state space called the hierarchical reachability graph (HRG). Using the HRG, we obtain necessary and sufficient conditions for reachability and deadlock, as well as algorithms to test whether a given state or marking is reachable from the initial state and whether there is a deadlock state (a state with no successor states)     

The real-time supervisory control of an experimental manufacturing system based on a hybrid method

In this paper, the real-time supervisory control of an experimental manufacturing system is reported based on a recently proposed hybrid (mixed PN/automaton) approach. Assuming that an uncontrolled bounded Petri net (PN) model of a (plant) discrete event system (DES) and a set of forbidden state specifications are given, the proposed approach computes a maximally permissive and nonblocking closed-loop hybrid model. The method is straightforward logically, graphically and technologically. This paper particularly shows the applicability of a hybrid (mixed PN/automaton) approach to low-level real-time DES control. To do this, programmable logic controller (PLC) based real-time control of an experimental manufacturing system is considered.