Hexagonal SrFe12O19 ferrite with high saturation magnetization

Hexagonal M-type ferrites with a nominal composition SrFe₁₂O₁₉ (SrM) were prepared via a ceramic route using acicular goethite (α-FeOOH) nanopowders obtained at different hydrothermal temperature as one of the starting materials, and their structural and magnetic properties were investigated. The best hydrothermal temperature of α-FeOOH used was found to be 1ower than 180?°C, and the best sintering temperature of SrM should be 1200?°C. The highest saturation magnetization of SrM reaches 76.7?emu/g, a very high value rarely found in the SrM ferrites without any substitution or dopant.     

Structural,morphological, and magnetic properties of ZnxCo1-xFe2O4 (0 ≤ x ≤ 1) prepared using a chemical co-precipitation method

In the present study, the chemical co-precipitation technique was adopted to synthesize Zn_xCo_1-xFe₂O₄ (ZCF) (0?≤ x?≤?1) ferrites. The thermogravimetric-differential thermal analysis results revealed that above 405?°C, the precursor had decomposed and ferrite formation had occurred. The structure and morphology of the prepared ferrite nanoparticles were investigated using X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy (FE-SEM). The synthesized polycrystalline nanoparticles had a cubic spinel structure and the crystallite size was in the range of 6.09–12.98?nm. The prepared ferrites appeared as nearly spherical nanoparticles with a particle size in between 0.13 and 0.23?µm, as confirmed using FE-SEM. The elemental composition was determined using the energy-dispersive X-ray spectroscopy technique. The influence of the Zn-substituted cobalt ferrites (ZCF) on the structural, morphological, and magnetic properties were studied. The magnetic properties of the ZCF samples such as saturation magnetization, remanence magnetization, and coercivity measured at room temperature were 0.387–2.065?emu/g, 0.057–1.282?emu/g, and 60–1834?Oe, respectively. It was confirmed from the nature of the hysteresis loops that the given ZCF samples can be considered as a soft magnetic material.     

Structural,magnetic and magnetostrictive properties of Co1-xLixFe2O4 synthesized by cathode materials of spent Li-ion batteries

In this study, we investigated the effects of substituting Li⁺ for Co²⁺ at the B sites of the spinel lattice on the structural, magnetic and magnetostrictive properties of cobalt ferrites. The Li⁺ substituted cobalt ferrites, Co_1-xLi_xFe₂O₄, with x varying from 0 to 0.7 in 0.1 increments, were synthesized with a sol-gel auto-combustion method using the cathode materials of spent Li-ion batteries. X-ray diffraction analysis revealed that all the Co_1-xLi_xFe₂O₄ nanopowders had a single-phase spinel structure and the lattice parameters decreased with increasing Li⁺ content, which can be proved by slight shifts towards higher diffraction angle values of the (311) peak. Field emission scanning electron microscopy was used to observe the fractured inner surface of the sintered cylindrical rods and the increased porosity resulted in a decreased magnetostriction. The oxidation states of Co and Fe in the cobalt ferrite samples were examined by X-ray photoelectron spectroscopy. High resolution transmission electron microscopy micrographs showed that most particles were roughly spherical and with sizes of 25–35?nm. Li⁺ substitution had a strong effect on the saturation magnetization and coercivity, which were characterized with a vibrating sample magnetometer. The Curie temperature was reduced due to the decrease in magnetic cations and the weakening of the exchange interactions. The magnetostrictive properties were influenced by the incorporation of Li⁺ at the B sites of the spinel structure and correlated with the changes in porosity, magnetocrystalline anisotropy and the cation distribution.     

Sol-gel synthesis,characterization, and supercapacitor applications of MCo2O4 (M = Ni,Mn, Cu,Zn) cobaltite spinels

High performance MCo₂O₄spinels (M = Ni, Mn, Cu, Zn) were synthesized by the sol gel method (citrate) and their capacitive behavior was investigated in alkaline electrolyte. Their structural, morphological, functional groups and textural properties were characterized by TG/DSC, XRD, SEM, FTIR, EDS and BET. The capacitive properties of spinel MCo₂O₄ samples were thoroughly investigated in 1?M KOH aqueous electrolyte using cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The results revealed high stability of the samples and excellent electrochemical reversibility, and exhibited specific capacity depending on the nature of the transition metal ion M. A high specific capacitance of 285?F?g^?1 was measured for CuCo₂O₄ and a low capacitance of 158?F?g^?1 for ZnCo₂O₄.In addition, MCo₂O₄ spinels displayed good stability during long-term cycles with a cycling efficiency which exceeds75% after 1000 cycles. The obtained results classified MCo₂O₄ cobaltite spinels as most promising materials for their application in super capacitors.     

Effect of Zn substitution on the structural and magnetic properties of nanocrystalline NiFe2O4 ferrites

Nanocrystalline Ni_1?xZn_xFe₂O₄ (where, x = 0.0, 0.2, 0.4, 0.6, 0.8 & 1) samples were synthesized through solution combustion technique using oxylyl de-hydrazide (ODH) as a fuel and the effect of dopant and its concentration on the structural and magnetic properties was investigated. As-prepared samples were characterized using different characterization techniques such as, XRD, SEM-EDS, TEM and Raman spectroscopy for their phase-purity, crystallinity, surface morphology and elemental composition; also magnetic properties were investigated through EPR, Mossbauer spectroscopy and vibrating sample magnetometer (VSM). Rietveld fitted XRD and Raman studies confirm the formation of cubic spinel structured ferrites and substitution of Zn ion at Ni site without formation of impurity phases. No other structural changes were observed and the structure remains in cubic phase with increase of Zn concentration. SEM and TEM micrographs reveal that the particles are agglomerated and the particles size were found in the nano range. Also good stoichiometric composition was observed in all the compositions of Zn substituted Ni ferrite samples. Magnetic measurements (VSM) reveal that pure Ni ferrites exhibits soft magnetic behaviour. Further the ferromagnetic behaviour suppressed with the substitution of diamagnetic Zn ion and with increase of its concentration in Ni ferrites, which was further evidenced in the Mossbauer spectroscopic results. At room temperature, electronic paramagnetic resonance spectra exhibits a broad resonance signal with Lande's g factor varies from 2.23 to 1.95 with increase in Zn content, which is attributed to spin exchange interactions between Fe³⁺, Ni²⁺ and Zn²⁺ ions also asymmetric EPR spectra was observed. The investigated results show that, Zn substitution has greater impact on the magnetic properties of Ni ferrites due to the diamagnetic nature of Zn, which inturn alters the cationic distribution and the exchange interactions between Ni-Fe and Fe-Fe.     

Structural and magnetic studies of Ce-Zn doped M-type SrFe12O19 hexagonal ferrite synthesized by sol-gel auto-combustion method

In the present work, the M-type Sr-hexagonal ferrites having chemical composition Sr_1-xCe_xFe_12-yZn_yO₁₉ (x?=?0.000, 0.025, 0.050, 0.075, 0.10, y?=?0.00, 0.25, 0.50, 0.75, 1.0) are prepared via sol-gel autocombustion technique. The Structural and magnetic properties of M-type Sr-hexagonal ferrites are studied and discussed thoroughly. The structural, micro graphical and magnetic particularities of the samples are calculated through X-Ray diffraction (XRD), scanning electron microscopy (SEM), and vibrating sample magnetometer (VSM) respectively. X-ray diffraction assured that all the synthesized composites possess a pure M-type hexaferrite structure and basic crystalline configuration of Sr-hexaferrite which does not alter by Ce-Zn substitution. It is observed that the Ce-Zn substitution has significant effect on its magnetic properties. VSM results reveal that pure sample has coercivity of 4.49?kOe, which shows the hard nature of the samples. It is perceived that values of remanence (M_r) and saturation magnetization (M_s) decline with increasing the Ce-Zn ions substitution. The reason behind the reduction in magnetic saturation (M_s) and remanence (M_r) might be spin canting and dilution phenomena with increasing the rare earth substituted ions. The large coercivity magnets may be valuable for permanent (stable) magnet applications. The prepared composites could be useful for applications in microwave absorbing materials.     

Synthesis of MFe2O4 (M=Mg2+, Zn2+, Mn2+) spinel ferrites and their structural,elastic and electron magnetic resonance properties

Structural, elastic and electron magnetic resonance investigations of spinel ferrites with the formula MFe₂O₄ (M = Mg²⁺, Zn²⁺, Mn²⁺) synthesized by the sol-gel auto-combustion method are reported here. XRD patterns revealed the co-existence of secondary phases along with the ferrite phase. The lattice parameter (8.301?Å, 8.366?Å and 8.434?Å) was found to be varying according to the ionic radii of cations. As determined by scanning electron microscopy (SEM), ZnFe₂O₄ has a comparatively narrow distribution of grain sizes (1.3–3.8?µm) compared to those in MnFe₂O₄ (0.8–4.3?µm) and MgFe₂O₄ (0.3–4.8?µm). The estimated values of average crystallite sizes (17.5?nm, 21.3?nm and 23.3?nm) determined from the X-ray diffraction peaks are considerably less than the average grain sizes (1.3?µm, 1.6?µm and 2.7?µm) estimated from the SEM histograms. The vibrational frequencies in FTIR spectra are in the conformity with the cubic spinel structure and their variation supports the variation of lattice parameter. Equal values of Poission's ratio (0.35) were obtained for the three systems which represent the isotropic behaviour of spinel ferrite systems. The exceptional low value of Lande's g-parameter for ZnFe₂O₄ indicates the dominance of Fe³⁺–O–Fe³⁺ superexchange interaction. Though cation redistribution is possible in the present ferrite systems, the secondary phases existed in these ferrite systems are predominantly influencing the structural, elastic and electron magnetic resonance properties.     

New LiCo0.5PrxFe2−xO4 nanoferrites: Prepared via low cost technique for high density storage application

Praseodymium substituted nano crystalline LiCo spinel ferrites with different concentrations were fabricated by micro-emulsion route. TGA, X-ray diffraction and magnetic properties was employed to study the effect of substitution of the Pr on the structure and magnetic parameters. XRD confirmed the formation of the single phase spinel ferrites with minor coexistence of orthophase. The particle size from XRD data was calculated in range from 53 nm to 106 nm. The VSM was employed for magnetic studies between ? 10,000 Oe and 10,000 Oe range. Considerable high value of ‘Hc’ coercivity (1581 Oe) and an enhanced value of ‘Ms’ saturation magnetization (51 emu/g) have been obtained as result of substitution. The value of Hc is high enough value but in soft ferrite range. Hence synthesized LiCo_0.5Pr_xFe_2?xO₄ ferrites are suitable for high density storage devices application.     

Facile micro-patterning of ferromagnetic CoFe2O4 films using a combined approach of sol–gel method and UV irradiation

CoFe₂O₄ photosensitive sol was prepared using iron nitrate and cobalt nitrate as precursors, acetyl acetone as a chelating agent, and ethanol as a solvent. CoFe₂O₄ photosensitive sol was used to fabricate smooth and micro-patterned CoFe₂O₄ films. The effects of UV irradiation on the crystallinity, surface morphology and ferromagnetic properties of CoFe₂O₄ films were investigated. For the film prepared using conventional sol-gel process, the crystallization of spinel CoFe₂O₄ phase was completely finished at ~ 600?℃, and no intermediate phase was formed. However, when the sol-gel process was combined with UV irradiation, Fe₂O₃ and CoO intermediate phases were firstly generated, and then reacted to form CoFe₂O₄ phase. Facile micro-patterning of CoFe₂O₄ films can be realized using a combined approach of sol-gel method and UV irradiation without using any photoresist. The structure and functional properties of the CoFe₂O₄ film have not been affected during the patterning process, and its magnetic properties have also not been changed.     

Microstructure,magnetic, and power loss characteristics of low-sintered NiCuZn ferrites with La2O3-Bi2O3 additives

Low-temperature-sintered Ni_0.5Cu_0.125Zn_0.375Fe_1.98O₄ ferrites co-added with x wt% (x = 0.00-0.25 wt%) La₂O₃ and 0.25 wt% Bi₂O₃ were successfully prepared via conventional solid-phase reaction method. The phase composition, microstructure, magnetic properties, and especially power loss variation of the samples were systematically studied. The results showed that all samples possessed a single spinel phase structure at a sintering temperature of 900°C, exhibiting high degree of densification and uniform grains. The appropriate amount of La₂O₃ additive improved the saturation flux density and permeability of NiCuZn ferrites, simultaneously reducing the coercivity and power loss. The maximum permeability and the lowest power loss were achieved at x = 0.15 wt%. The corresponding sample had the homogeneous microstructure and excellent magnetic properties, being a promising low-temperature co-fired ferrite candidate for magnetic power components.     

Magnetic CoFe2O4 nanoparticles doped with metal ions: A review

Ceramic-magnetic nanoparticles (CMNPs) are attracting attention due to their various applications, especially in biomedical industries. Among them, spinel ferrite CMNPs have received considerable deliberations among different spinel metal oxides due to their fascinating characteristics. Spinel ferrite CMNPs are used for enhancement of the applicability of CMNPs without affecting the intrinsic advantages of iron oxide CMNPs. Spinel ferrites with doping agents have useful electrical and magnetic properties in various fields. Moreover, the replacement of metallic atoms in ferrites is promising to manipulate physical characteristics and improve their performance. Among different spinel ferrites, CoFe₂O₄ nanoparticles are the most investigated CMNPs. Furthermore, they are used as permanent magnets, magnetic recorders in high-density and micro-wave devices, and magnetic fluids. This study reviews the CoFe₂O₄ nanoparticles doped with various elements and their applications in various fields.     

Microstructure and magnetic properties of Ni0·75Zn0·25Fe2O4 ferrite prepared using an electric current-assisted sintering method

Using a Ni_0·75Zn_0·25Fe₂O₄ nanopowder synthesized by means of a hydrothermal method as a raw material, polycrystalline nickel zinc (NiZn) ferrite ceramics composed of sub-micron grains were successfully prepared via an electric current-assisted sintering method. Temperatures ranging from 800 °C to 950 °C and a dwell time of 20 min were employed. The phase composition and microstructure of the samples were characterized via X-ray diffraction and scanning electron microscopy, respectively. Moreover, the magnetic properties of the samples were investigated using a vibrating sample magnetometer and a ferromagnetic resonance system. The results revealed that each sintered sample was mainly composed of a spinel phase. With increasing sintering temperature, the specific saturation magnetization increased from 71.85 emu/g to 74.58 emu/g, owing mainly to the increase in the relative density and the average grain size of the NiZn ferrites. The coercivity and ferromagnetic resonance linewidth of the ferrite ceramics decreased monotonically with increasing sintering temperature, owing mainly to the magnetostriction coefficient, saturation magnetization, and porosity of the sintered ferrites.     

The influence of ZrO2 additive on sintering and microstructure of lithium and lithium-titanium-zinc ferrites

The effect of ZrO₂ addition (0–3?wt%) on sintering and microstructure of lithium and lithium-titanium-zinc ferrites was studied. The Vickers hardness and dc electrical resistivity were investigated and discussed in correlation with the structural properties. Ferrite powders with the chemical compositions of LiFe₅O₈ and Li_0.65Fe_1.6Ti_0.5Zn_0.2Mn_0.05O₄ were prepared by the conventional ceramic technique. The synthesized ferrites were doped with various amount of ZrO₂ and then were sintered at 1050?°C for 2?h. Dilatometric studies showed that the zirconia addition affects the densification process of ferrite ceramics so that the shrinkage rate of pressed ferrite powders during their heating decreased with an increase in ZrO₂ content. The bulk density of the sintered ferrites varied slightly as the concentration of the additive was increased from 0 to 2?wt%, while the density of ferrite doped with 3?wt% ZrO₂ significantly decreased. X-ray diffraction and scanning electron microscopy analyses showed that the lattice parameter of ferrites increases and their average grain size decreases as the additive content grows. It was established that small amounts of ZrO₂ additive (up to 2?wt%) improve significantly the hardness and the electrical resistivity of ferrites.     

Physical,structural, morphological,magnetic and electrical properties of Co0.5-xNixZn0.5Fe2O4 nanocrystalline ferrites

A series of Co_0.5-xNi_xZn_0.5Fe₂O₄ (x?=?0–0.25 insteps of 0.05) nano crystalline ferrites were synthesized in combustion method using citric acid as fuel. Densities and porosities were calculated using the lattice constant and Archimedes's principle. A linear increase in experimental density and a decrease in porosity were observed with increase in nickel concentration. Cationic distribution was proposed on the basis of theoretical lattice constant and it was correlated with the variation in magnetic and electrical properties of all samples. TEM image of the sample with nickel concentration x?=?0.15 indicated the existence of nano-metric range particles and the sample was characterized with the help of inter-planar spacing(s) from SAED pattern. Morphological and surface analysis was studies using Scanning Electron Microscopy and well developed nearly spherical grains were observed with increase in nickel concentration. Energy Dispersive Spectroscopic (EDS) analysis was performed for all nickel substituted samples and all displayed stoichiometric proportions of ions in the samples as per the chemical composition. Elemental mapping was done for all samples using EDS data. Curie temperature was dropped nearly 90?°C at the end of the series. Initial permeability showed slight variation with an increase in nickel concentration and it remained nearly constant with frequency up to 3?MHz. Magnetic loss was observed to be constant for all samples after 100?kHz. DC Electrical resistivities of all samples were measured and all samples displayed resistivity in the order of 10⁸ Ω-cm. AC resistivity and dielectric studies were conducted from 100?Hz to 5?MHz for all samples. Dielectric constant and losses of all samples exhibited very low values compared to that of conventional ferrites. The electrical properties of all samples were discussed with the help of temperature variation of resistivity, activation energy, grain size, density and porosity.     

Frequency, temperature and In dependent electrical conduction in NiFe2O4 powder

A series of polycrystalline spinel ferrites with the composition NiIn_xFe_2-xO₄ (0 ≤ x ≤ 0.3) were prepared by the solid state reaction to study the effect of In³⁺ ions substitution on their dc electrical resistivity and dielectric properties. The dc resistivity has been investigated as a function of temperature and composition. The indium ion increases the dc resistivity and activation energy of the system. A study of the dielectric properties of these mixed ferrites, as a function of composition, frequency and temperature, has been undertaken. The dielectric constant (ε′), dielectric loss (ε″) and dielectric loss tangent (tanδ) all decreases with frequency as well as with the composition. The dielectric constant (ε′) and dielectric loss tangent (tanδ) were increases with increasing temperature. AC conductivity increases with increase in applied frequency. The dielectric behavior of the present samples is attributed to the Maxwell-Wagner type interfacial polarization. The conduction mechanism in these ferrites is due to electron hopping between Fe²⁺ and Fe³⁺ ions on adjacent octahedral sites.     

Y3+ composition and particle size influenced magnetic and dielectric properties of nanocrystalline Ni0.5Cu0.5YxFe2-xO4 ferrites

The rare earth Yttrium (Y³⁺) doped Ni–Cu nanoferrites (NCY ferrites) with chemical formulation, Ni_0.5Cu_0.5Y_xFe_2-xO₄ (x = 0–0.125) were prepared successfully by the sol gel route. The X-ray diffraction (XRD) of NCY ferrites revealed that a single phase of cubic spinel is created within the synthesized ferrites. The crystallite sizes obtained by XRD pattern are in the range of 51–84 nm, in good agreement with those obtained by transmission electron microscopy (TEM) and field emission scanning electron microscopy (FSEM). The calculated lattice parameter of NCY ferrite unit cells initially decreases up to x = 0.1 and increase afterwards for x = 0.125. From FESEM and TEM micrographs, surface morphology and microstructure of NCY nanoferrites were studied. The energy dispersive X-ray spectroscopy (EDS) patterns have confirmed the stoichiometric presence of Ni, Cu, Y, O and Fe, those were used to prepare the samples. The variations in the magnetic properties with Y³⁺ compositions were investigated by obtaining the hysteresis loops of NCY ferrites. The magnetic hopping lengths L_A and L_B were calculated from XRD. The saturation magnetization, Bohr magneton number, coercivity and retentivity of the ferrites were influenced by the structural parameters like crystallite size and lattice strain. The frequency variation of dielectric constant and loss tangent exhibit space charge polarization as a phenomenon governing the dielectric behavior of the ferrites.     

Characterization and low-temperature sintering of Ni0.5Zn0.5Fe2O4 nano-powders prepared by refluxing method

The as-prepared Ni_0.5Zn_0.5Fe₂O₄ powders fabricated directly from the solution of metal nitrates by the refluxing method were testified by the analysis of XRD, TEM, SAED and HRTEM. XRD pattern indicated that obtained Ni_0.5Zn_0.5Fe₂O₄ powders were single phase with spinel structure, TEM analysis showed that the powders with cubic shape were uniform in particle size of about 10-20 nm. Ceramics prepared by the as-synthesized Ni_0.5Zn_0.5Fe₂O₄ powders sintered at various temperatures between 950 °C and 1150 °C for 2 h were observed by SEM technique, which indicated that the Ni_0.5Zn_0.5Fe₂O₄ ferrites can almost be sintered to theoretic density at 1100 °C for 2 h, lower by at least about 200 °C compared with those ferrites prepared by the conventional oxide method. The relative magnetic loss tanδ/μ_i of the ceramic samples sintered at the temperature 1050 °C was measured to be of the order of 10^− 4-10^− 5 in the frequency range from 1 MHz to 10 MHz, and the threshold frequency of the ferrites was 77.2 MHz.     

Preparations and characterizations of Ca doped Ni–Mg–Mn nanocrystalline ferrites for switching field high-frequency applications

Ca-doped Ni–Mg–Mn spinel ferrites with compositions of Ni_0·5Mg_0·3Mn_0.2Ca_xFe_2-xO₄ (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared via sol-gel auto-ignition technique. TGA/DTA, FTIR, XRD, FESEM, and VSM were employed to evaluate the thermal, spectral, structural, morphological, and magnetic features of Ca-doped Ni–Mg–Mn spinel ferrites. TGA/DTA curves show the weight loss in the sample. This weight loss was attributed to the oxidation and decomposition of the sample contents at a temperature of 500 °C. XRD reveals a single-phase structure of the Ni–Mg–Mn nano ferrites. A single-phase orthorhombic structure was confirmed for Ca-doped Ni–Mg–Mn ferrites. Structural parameters such as lattice parameter, ‘da’, ‘db’, ‘dc’, and ‘dv’ were evaluated using unit cell software. The absorption peaks at 427 to 538 cm^?1 confirmed the spinel structure, which was evaluated using FTIR. FESEM analyses showed that the agglomerations increased with the doping of Ca in Ni–Mg–Mn ferrites. Remanence, Y–K angles, saturation, coercive force, magnetic squareness, magnetic moment, and anisotropy constant were determined for Ca-doped Ni–Mg–Mn spinel ferrite samples. It is noticed that saturation increases from 29.157 to 51.322 emu/g, whereas remanence increased from 5.34 to 9.40 emu/g, respectively. The permeability, anisotropy constant, and magnetic moments were also found to increase with Ca doping. However, the Y–K angles increased with Ca concentration in Ni–Mg–Mn nano ferrites. In addition, the switching field distribution (SFD) and high-frequency response of all the Ca-doped Ni–Mg–Mn samples were also evaluated. Ca-doped Ni–Mg–Mn samples are suggested to be suitable for switching, filters, inductors, and microwave absorption applications because of the superparamagnetic nature of the prepared spinel ferrites.     

CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films

We present a laser-assisted preparation of transparent europium-titanate Eu₂Ti₂O₇ thin films with tailored structural and optical properties. We have evaluated the effects of the irradiation time on the structural and the optical properties of the films. This approach allows the preparation of nanocrystalline crack-free films and micro patterns. The amorphous thin films were prepared by a sol-gel method. The films were annealed by a CO₂ laser beam for various time intervals. The laser irradiation induced a crystallization process that resulted in the formation of Eu₂Ti₂O₇ nanocrystals. The nanocrystals regularly grew with increasing irradiation time reaching the size from 25?nm to 45?nm. A film of a thickness 480?nm exhibited an optical transmission of 91.9% that is close to the maximal theoretical limit. The film's refractive index at 632?nm was 2.26. A micrometric pattern was prepared by a direct laser writing followed by a wet chemical etching. Feasibility of the demonstrated approach, together with the high film's quality, and europium-titanate chemical resistivity open up many opportunities for advanced applications. The approach can be used for a preparation of protective coatings and integrated photonic devices such as planar optical waveguides and couplers.     

Achieving ultra-high electromagnetic wave absorption by anchoring Co0.33Ni0.33Mn0.33Fe2O4 nanoparticles on graphene sheets using microwave-assisted polyol method

The Co_0.33Ni_0.33Mn_0.33Fe₂O₄/graphene nanocomposite for electromagnetic wave absorption was successfully synthesized from metal chlorides solutions and graphite powder by a simple and rapid microwave-assisted polyol method via anchoring the Co_0.33Ni_0.33Mn_0.33Fe₂O₄ nanoparticles on the layered graphene sheets. The Fe³⁺, Co²⁺, Ni²⁺ and Mn²⁺ ions in the solutions were attracted by graphene oxide obtained from graphite and converted to the precursors Fe(OH)₃, Co(OH)₂, Ni(OH)₂, and Mn(OH)₂ under slightly alkaline conditions. After the transformations of the precursors to Co-Ni-Mn ferrites and conversion of graphene oxide to graphene under microwave irradiation at 170?°C in just 25?min, the Co_0.33Ni_0.33Mn_0.33Fe₂O₄/graphene nanocomposite was prepared. The composition and structure of the nanocomposite were characterized by X-ray diffraction (XRD), inductive coupled plasma emission spectroscopy (ICP), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy (RS), transmission electron microscopy (TEM), etc. It was found that with the filling ratio of only 20?wt% and the thickness of 2.3?mm, the nanocomposite showed an ultra-wide effective absorption bandwidth (less than ?10?dB) of 8.48?GHz (from 9.52 to 18.00?GHz) with the minimum reflection loss of ??24.29?dB. Compared to pure graphene sheets, Co_0.33Ni_0.33Mn_0.33Fe₂O₄ nanoparticles and the counterparts reported in literature, the nanocomposite exhibited much better electromagnetic wave absorption, mainly attributed to strong wave attenuation, as a result of synergistic effects of dielectric loss, conductive loss and magnetic loss, and to good impedance matching. In view of its thin thickness, light weight and outstanding electromagnetic wave absorption property, the nanocomposite could be used as a very promising electromagnetic wave absorber.