Multicolour tunable luminescence of thermal-stable Ce3+/Tb3+/Eu3+-triactivated Ca3Gd(GaO)3(BO3)4 phosphors via Ce3+ → Tb3+ → Eu3+ energy transfer for near-UV WLEDs applications

A series of single-component blue, green and red phosphors have been fabricated based on the Ca₃Gd(GaO)₃(BO₃)₄ host through doping of the Ce³⁺/Tb³⁺/Eu³⁺ ions, and their crystal structure and photoluminescence properties have been discussed in detail. A terbium bridge model via Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer has been studied. The emission colours of the phosphors can be tuned from blue (0.1661, 0.0686) to green (0.3263, 0.4791) and eventually to red (0.5284, 0.4040) under a single 344 nm UV excitation as the result of the Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer. The energy transfer mechanisms of Ce³⁺ → Tb³⁺ and Tb³⁺ → Eu³⁺ were found to be dipole-dipole interactions. Importantly, Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors had high internal quantum efficiency. Moreover, the study on the temperature-dependent emission spectra revealed that the Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors possessed good thermal stability. The above results indicate that the phosphors can be applied into white light-emitting diodes as single-component multi-colour phosphors.     

Color tunable Ba3Lu(PO4)3:Tb3+,Mn2+ phosphor via Tb3+→Mn2+ energy transfer for white LEDs

Series of UV excited Ba₃Lu(PO₄)₃:Tb³⁺,Mn²⁺ phosphors with tunable green to red emissions had been prepared using solid state reactions. Powder X-ray diffraction and Rietveld structure refinement were used to investigate the phase purity and crystal structure of the prepared samples. Under UV excitation, the Ba₃Lu(PO₄)₃:Tb³⁺,Mn²⁺ samples exhibited not only the typical Tb³⁺ emission peaks but also the broad emission band of Mn²⁺ ions due to the efficient Tb³⁺→Mn²⁺ energy transfer which had been verified by luminescence spectra and decay curves. Utilizing the Inokuti-Hirayama model, the Tb³⁺→Mn²⁺ energy transfer mechanism was determined to be the electronic dipole–quadrupole interaction. Moreover, the emission spectra of Ba₃Lu(PO₄)₃:0.80Tb³⁺,0.015Mn²⁺ sample at different temperatures manifested that our prepared phosphors possessed good thermal stability. The luminescence properties investigation results revealed the potential value of Ba₃Lu(PO₄)₃F:Tb³⁺,Mn²⁺ in application for UV excited phosphor converted white light emitting diodes.     

Synthesis and photoluminescent properties of high-efficient color-tunable Ba3Y2B6O15: Ce3+, Tb3+ phosphors

High-efficient Ce³⁺/Tb³⁺ co-doped Ba₃Y₂B₆O₁₅ phosphors with multi color-emitting were firstly prepared, and their structural and luminescent properties were studied by XRD Rietveld refinement, emission/excitation spectra, fluorescence lifetimes as well as temperature-variable emission spectra. Upon 365?nm excitation, the characteristic blue Ce³⁺ band along with green Tb³⁺ peaks were simultaneously found in the emission spectra. Moreover, by increasing concentration of Tb³⁺, a blue-to-green tunable emitting color could be realized by effective Ce³⁺→Tb³⁺ energy transfer. Furthermore, all Ba₃Y₂B₆O₁₅: Ce³⁺, Tb³⁺ phosphors exhibit high internal quantum efficiency of ~?90%, while the temperature-variable emission spectra reveal that the phosphors possess impressive color stability as well as good thermal stability (T₅₀ =?~?120?°C). The results indicate that these efficient color-tuning Ba₃Y₂B₆O₁₅: Ce³⁺, Tb³⁺ might be candidate as converted phosphor for UV-excited light-emitting diodes.     

Preparation,luminescence properties and energy transfer of Ca9Y(PO4)7: Eu2+‐Tb3+ phosphors

Tb³⁺‐doped and Eu²⁺, Tb³⁺ co‐doped Ca₉Y(PO₄)₇ phosphors were synthesized by conventional solid‐state method. Additionally, the luminescence properties, decay behavior and energy transfer mechanism have already been investigated in detail. The green emission intensity of Tb³⁺ ions under NUV excitation is weak due to its spin‐forbidden f‐f transition. While Eu²⁺ can efficiently absorb NUV light and yield broad blue emission, most of which can be absorbed by Tb³⁺ ions. Thus, the emission color can be easily tuned from cyan to green through the energy transfer of Eu²⁺→Tb³⁺ in Ca₉Y(PO₄)₇:Eu²⁺,Tb³⁺ phosphor. In this work, the phenomenon of cross‐relaxation between ⁵D₃ and ⁵D₄ are also mentioned. The energy transfer is confirmed to be resulted from a quadrupole‐quadrupole mechanism.     

Luminescence properties of Eu3+- and Tb3+-doped δ-Bi2O3 stabilized by Th4+ substitution

The extent of incorporating Eu³⁺ and Tb³⁺ for bismuth in the oxygen-deficient fluorite structured Bi_0.50Th_0.50O_y has been examined together with the comprehension of their luminescence characteristics. The samples were synthesized by solution combustion method from which doping limits of Eu³⁺ and Tb³⁺, respectively, in the fluorite structure was determined. Uniform distribution of constituent elements was confirmed from elemental mapping. Doping Eu³⁺ and Tb³⁺-ions introduced compressive strain and oxygen vacancies in the system. Raman spectra of doped samples confirmed the fluorite structure and revealed the existence of oxygen vacancies in them. While Tb-doped samples showed a systematic decrease in band gap with increase in dopant concentration, such systematic variation was not observed for Eu-doped samples. Conclusions about the local site symmetry around Eu³⁺ and Tb³⁺ ions in the defect fluorite structure have been drawn from the photoluminescent spectral analysis of doped samples. Energy transfer from Bi³⁺ to Eu³⁺ and Tb³⁺-has been observed in these samples. The Judd-Ofelt analysis has been carried out to understand luminescence characteristics in these samples.     

Luminescent properties and energy transfer mechanism of NaGd(MoO4)2:Sm3+, Eu3+ phosphors

Sm³⁺ singly doped NaGd(MoO₄)₂ and Sm³⁺, Eu³⁺ co-doped NaGd(MoO₄)₂ phosphors by using sodium citrate as chelating agent were synthesized via hydrothermal method. The structure and morphology were characterized by means of X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). During the synthesis process, the Na₃Cit concentration plays a crucial role in determining the morphology and particle size of the products. The optimal doping concentration in Sm³⁺ singly doped NaGd(MoO₄)₂ phosphor was confirmed. The relevant parameters of energy transfer in the NaGd(MoO₄)₂: Sm³⁺, Eu³⁺ phosphors have been calculated based on the fluorescent dynamic analysis. Finally, on the analysis of luminescent spectra and fluorescent dynamics, the main energy transfer mechanism between Sm³⁺ and Eu³⁺ in NaGd(MoO₄)₂ phosphor is confirmed to be electric dipole-dipole interaction, and energy transfer pathway is from ⁴G_5/2 state of Sm³⁺ to ⁵D₀ state of Eu³⁺ rather than ⁵D₁ of Eu³⁺ ions.     

Precipitation Synthesis and Color‐Tailorable Luminescence of α‐Zr(HPO4)2: RE3+(RE = Eu,Tb) Nanosheet Phosphors

The rare earth (RE = Eu and Tb) ions‐doped α‐Zr(HPO₄)₂ (ZrP) nanosheet phosphors were synthesized by direct precipitation method, and their structures and photoluminescence properties were investigated. The results of X‐ray diffraction and scanning electron microscopy indicated that the systems of ZrP:RE³⁺ had similar nanosheet structure except with relatively larger interlayer spacing as compared with pure α‐ZrP. Under the excitation of UV light, the ZrP:RE³⁺ nanosheet phosphors showed red and green emission peaks corresponding to the ⁵D₀→⁷F₂ transition of Eu³⁺ and the ⁵D₄→⁷F₅ transition of Tb³⁺, respectively. After Eu³⁺ and Tb³⁺ were co‐doped in ZrP host, not only the red and green emission peaks were simultaneously observed, but also the luminescent intensity and fluorescence lifetimes of Tb³⁺ were gradually decreased with the increase in Eu³⁺‐doping concentration, which implied the energy transfer from Tb³⁺ to Eu³⁺ happened. It was deduced that the energy transfer from Tb³⁺ to Eu³⁺ occurred via exchange interaction. Through optimization to the samples, a nearly white‐light emission with the color coordinate (0.322, 0.263) was achieved under 377 nm excitation. The ZrP:RE³⁺ nanosheet phosphors may be a potential color‐tailorable candidate for fabricating optoelectronic devices such as electroluminescence panels.     

Novel Broadband Excited and Linear Red‐Emitting Ba2Y(BO3)2Cl: Ce3+, Tb3+, Eu3+ Phosphor: Luminescence and Energy Transfer

A series of Ce³⁺, Tb³⁺, Eu³⁺ tri‐doped Ba₂Y(BO₃)₂Cl red‐emitting phosphor have been synthesized by solid‐state method. The Ce³⁺→Tb³⁺→Eu³⁺ energy‐transfer scheme has been proposed to realize the sensitization of Eu³⁺ ion emission by Ce³⁺ ions. Following this energy‐transfer model, near‐UV convertible Eu³⁺‐activated red phosphors have been obtained in Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ phosphors. Energy transfers from Ce³⁺ to Tb³⁺, and Tb³⁺ to Eu³⁺, as well as corresponding energy‐transfer efficiencies are investigated. The combination of narrow‐line red emission and near‐UV broadband excitation makes Ba₂Y(BO₃)₂Cl: Ce³⁺, Tb³⁺, Eu³⁺ as a novel and efficient red phosphor for NUV LED applications.     

Tunable luminescence and energy transfer properties of MgY4Si3O13: Ce3+, Tb3+, Eu3+ phosphors

The tricolor-emitting MgY₄Si₃O₁₃: Ce³⁺, Tb³⁺, Eu³⁺ phosphors for ultraviolet-LED have been prepared via a high-temperature solid-state method. X-ray diffraction, photoluminescence emission, excitation spectra and fluorescence lifetime were utilized to characterize the structure and the properties of synthesized samples. Two different lattice sites for Ce³⁺ are occupied from the host structure and the normalized PL and PLE spectra. The emissions of single-doped Ce³⁺/Tb³⁺/Eu³⁺ are located in blue, green and red region, respectively. The energy transfer from Ce³⁺ to Tb³⁺ and from Tb³⁺ to Eu³⁺ has been validated by spectra and decay curves and the energy transfer mode from Tb³⁺ to Eu³⁺ was calculated to be electric dipole-dipole interactions. By adjusting the content of Tb³⁺ and Eu³⁺ in MgY₄Si₃O₁₃: Ce³⁺, Tb³⁺, Eu³⁺, the CIE coordinates can be changed from blue to green and eventually generate white light under UV excitation. All the results indicate that the MgY₄Si₃O₁₃: Ce³⁺, Tb³⁺, Eu³⁺ phosphors are potential candidates in the application of UV-WLEDs.     

Spectroscopic investigations on high efficiency deep red-emitting Ca2SiO4:Eu3+ phosphors synthesized from agricultural waste

Europium doped calcium orthosilicate (Ca₂SiO₄) phosphors have been synthesized by the conventional high temperature solid-state reaction method in various concentrations from agricultural waste (egg shell as a CaO and rice husk as a SiO₂). These phosphors structure from X-ray diffraction and morphology from scanning electron microscopy have been examined. Concentration dependent Eu³⁺ ions luminescent properties in Ca₂SiO₄ phosphors have been studied from the excitation, emission and decay curves analysis. The ⁵D₀ → ⁷F_J transitions observed in luminescence spectrum allows to determine the site symmetry of the Eu³⁺ ion. A charge transfer band (CTB) at around 260?nm which is due to the Eu–O interaction in the host along with the 4f – 4f excitation bands due to Eu³⁺ ions in UV and blue regions are observed. The color co-ordinates determined from emission spectra varies with concentrations of Eu³⁺ ions and are found to fall in the red region. The decay curves show single exponential behavior for all concentrations of Eu³⁺ ions (0.01–0.4?mol%) and the lifetimes varied from 2.67 to 2.78?ms. It is worth noting that the present material is found to be far better than many red phosphors synthesized by using agricultural waste as raw materials.     

Effects of In2O3 nanoparticles doping on the photoluminescent properties of Eu2+/Eu3+ ions in silica glasses

Eu²⁺/Eu³⁺ ions doped silica glasses contained In₂O₃ nanoparticles (NPs) have been fabricated by using nanoporous silica glasses. Interestingly, efficient energy transfer from In₂O₃ NPs to Eu²⁺/Eu³⁺ ions enhanced the photoluminescence (PL) emission of Eu²⁺/Eu³⁺ ions, which derives from lattice defects in In₂O₃ NPs. Our work has not only demonstrated a facile way to fabricate NPs and rare earth ions co-doped silica glasses, but also extended the applications of semiconductor oxide NPs such as In₂O₃ NPs.     

Tuning the Color Emission of Sr2P2O7: Tb3+, Eu3+ Phosphors Based on Energy Transfer

A series of color tunable Tb³⁺‐ and Eu³⁺‐activated Sr₂P₂O₇ phosphors were synthesized by a traditional solid‐state reaction method in air atmosphere. The crystal structure, photoluminescence (PL) properties, energy transfer, thermal stability, and luminous efficiency were investigated. A series of characteristic emission of Tb³⁺ and Eu³⁺ were observed in the PL spectra and the variation in the emission intensities of the three emission peaks at around 416 nm (blue), 545 nm (green), and 593 nm (orange‐red) induced the multicolor emission evolution by tuning the Tb³⁺/Eu³⁺ content ratio. The energy‐transfer mechanism from Tb³⁺ to Eu³⁺ ion was determined to be dipole–dipole interaction, and the energy‐transfer efficiency was about 90%. The novel phosphors have excellent thermal stability in the temperature range of 77–473 K and the Commission International De L'Eclairage 1931 chromaticity coordinates of Sr₂P₂O₇: Tb³⁺, Eu³⁺ (λ_ex = 378 nm) move toward the ideal white light coordinates.     

Structural-microstructural characterization and optical properties of Eu3+,Tb3+-codoped LaPO4·nH2O and LaPO4 nanorods hydrothermally synthesized with microwaves

Rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄·nH₂O single-crystal nanorods with the compositions La_0.99999-xEu_xTb_0.00001PO₄·nH₂O (x?=?0–0.03), La_0.99999-yTb_yEu_0.00001PO₄·n′H₂O (y?=?0–0.010), and La_0.99999-zTb_zEu_0.000007PO₄·n′′H₂O (z?=?0–0.012) were hydrothermally synthesized with microwaves. It is shown that the Eu³⁺,Tb³⁺ codoping does not affect the thermal stability of these nanorods, which is due to the formation of substitutional solid solutions with both Eu³⁺ and Tb³⁺ replacing La³⁺ in the crystal lattice. Moreover, it is also shown that monazite-type Eu³⁺,Tb³⁺-codoped LaPO₄ single-crystal nanorods can be obtained by calcining their rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄·(n,n′ or n′′)H₂O counterparts at moderate temperature in air, and that they are thermally stable. It is also observed that, for the same Eu³⁺,Tb³⁺-codoping content, the monazite-type Eu³⁺,Tb³⁺-codoped LaPO₄ nanorods exhibit higher photoluminescent efficiency than the rhabdophane-type Eu³⁺,Tb³⁺-codoped LaPO₄· (n,n′ or n′′)H₂O nanorods. Moreover, it is found that the highest photoluminescence emission corresponds to the monazite-type La_0.96999Eu_0.02Tb_0.00001PO₄ nanorods for the La_0.99999-xEu_xTb_0.00001PO₄ system. However, for those compositions energy transfer from Tb³⁺ to Eu³⁺ does not occur. In addition, for an efficient energy transfer to occur, a content of at least 1?mol% Tb³⁺ is needed in all the studied materials.     

Color-tunable properties based on complex anion substitution in Eu2+ doped Ca8Sc2(PO4)6-y(SiO4)1+y phosphor

We synthesized and investigated the effect of Eu²⁺ ions doping in a novel phosphor-silicate Ca₈Sc₂(PO₄)₆(SiO₄) phosphor. The structure and photoluminescence properties were determined by X-ray powder diffraction Rietveld refinement, diffuse reflection spectra, emission-excitation spectra, decay curves and temperature dependence spectra. The phosphors showed an asymmetric broad-band blue emission (Eu²⁺) with peak at 470?nm. Furthermore, we presented the Ca_7.96Sc₂(PO₄)_6-y(SiO₄)_1+y:0.04Eu²⁺ phosphors by co-substituting [Eu²⁺-Si⁴⁺] for [Ca²⁺-P⁵⁺], and different behaviors of luminescence evolution in response to structural variation were verified among the series of phosphors. The results were attributed to the presence of multi Ca²⁺ sites, resulting in the mixing of blue and green emissions for Eu²⁺ ions. The complex anion substitution of [PO₄]^3- by [SiO₄]^4- induced an increased crystal field splitting of the Eu²⁺ ions, which caused a decrease in emission energy from the 5d excited state to the 4f ground state and a resultant red-shift from 470?nm to 520?nm. All the properties indicated that the Ca₈Sc₂(PO₄)₆(SiO₄):Eu²⁺ phosphors have potential application for color-tunable WLEDs.     

Energy transfer and multicolor tunable emission in single-phase Tb3+, Eu3+ co-doped Sr3La(PO4)3 phosphors

A series of green-to-red color-tunable Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors were prepared by high temperature solid-state method. The crystal structures, photoluminescence properties, fluorescence lifetimes, and energy transfer of Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ were systematically investigated in detail. The obtained phosphors show both a green emission from Tb³⁺ and a red emission from Eu³⁺ with considerable intensity under ultraviolet (UV) excitation (~377 nm). The emission colors of the phosphors can be tuned from green (0.304, 0.589) through yellow (0.401, 0.505) and eventually to red (0.557, 0.392) due to efficient Tb³⁺-Eu³⁺ energy transfer (ET). The Tb³⁺→Eu³⁺ energy transfer process was demonstrated to be quadrupole-quadrupole mechanism by Inokuti-Hirayama model, with maximum ET efficiency of 86.3%. The results indicate that the Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors might find potential applications in the field of lighting and displays.     

Efficient sensitization of Tb3+ emission by Dy3+ in CaMoO4 phosphors: Energy transfer,tunable emission and optical thermometry

Dy³⁺/Tb³⁺ codoped CaMoO₄ phosphors were synthesized by a simple sol–gel method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectroscopy. The energy transfer process of Dy³⁺→Tb³⁺ was confirmed by excitation and emission spectra and luminescence decay curves, and the energy transfer efficiency was also estimated. The results verified that the efficient emission of Tb³⁺ was sensitized by Dy³⁺ under the excitation of 354 nm, realizing tunable emission in CaMoO₄ phosphors. Furthermore, optical thermometry was achieved by the fluorescence intensity ratio between Tb³⁺: ⁵D₄→⁷F₅ (~546 nm) and Dy³⁺: ⁴F_9/2→⁶H_13/2 (~575 nm). It is expected that the investigated CaMoO₄ nanograins doped with Dy³⁺/Tb³⁺ have prospective applications in display technology and optical thermometry.     

Luminescence properties and energy transfer of GdAl3(BO3)4:Ce3+, Tb3+ phosphor

Ce³⁺ and Tb³⁺ singly doped and co-doped GdAl₃(BO₃)₄ phosphors were synthesized by solid state reaction. The crystal structure, the luminescent properties, the lifetimes and the temperature-dependent luminescence characteristic of the phosphors were investigated. Through an effective energy transfer, the emission spectra of GdAl₃(BO₃)₄:Ce³⁺, Tb³⁺ phosphor contains both a broad band in the range of 330–400 nm originated from Ce³⁺ ions and a series of sharp peaks at 484, 541, 583, and 623 nm due to Tb³⁺ ions. The energy transfer from Ce³⁺ to Tb³⁺ in GdAl₃(BO₃)₄ host is demonstrated to be phonon assisted nonradiative energy transfer via a dipole–dipole interaction.     

Luminescence properties of Eu2+ and Mn2+ doped Sr1.7Mg0.3SiO4 phosphors

Eu²⁺, Mn²⁺ doped Sr_1.7Mg_0.3SiO₄ phosphors were prepared by high temperature solid-state reaction method. Their luminescence properties were studied. The emission spectra of Eu²⁺ singly doped Sr_1.7Mg_0.3SiO₄ consist of a blue band (455 nm) and a green band (550 nm). The relative intensities of two emissions varied with Eu²⁺ concentration. Eu²⁺ and Mn²⁺ co-doped Sr_1.7Mg_0.3SiO₄ phosphors emit three color lights and present whitish color. The blue (455 nm) and green (550 nm) emissions are attributed to the transitions of Eu²⁺, while the red (670 nm) emission is originated from the transition of Mn²⁺ ion. The results indicate the energy transfer from Eu²⁺ to Mn²⁺. The mechanism of the energy transfer is resonance-type energy transfer due to the spectral overlap between the emission of Eu²⁺and the absorption of Mn²⁺.     

X-ray photoelectron spectroscopy and optical analysis of pure white light emitting Dy3+ and Mn2+ codoped Na3Y(PO4)2 phosphors for solid-state lighting

A single-phase and optimized pure white light emitting Dy³⁺-doped and Dy³⁺/Mn²⁺ codoped Na₃Y(PO₄)₂ phosphors (NYPO) were synthesized by traditional solid state reaction process. The as-synthesized phosphors were characterized by X-ray diffraction, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectra and photoluminescence studies. The results suggested that the NYPO: Dy, Mn phosphors were crystallized in orthorhombic structures. The presence of dopants Dy and Mn was quantified by XPS analysis. All of the phosphors were effectively excited using a light of wavelength 351?nm and emissions in two regions, blue (~482?nm, ⁴F_9/2→⁶H_15/2) and yellow (~573?nm, ⁴F_9/2→⁶H_13/2), were obtained due to the f-f transitions of Dy³⁺ ions. The maximum intensities of Dy and Mn obtained were 0.07 and 0.05 for NYPO:Dy and NYPO:0.07Dy, Mn, respectively. The chromaticity coordinates, color temperatures, and color rendering indices of NYPO: 0.07Dy ((0.32, 0.33), 6194?K, and 48) and NYPO:0.07Dy, 0.05Mn phosphors ((0.33, 0.33), 5688?K, and 62) were determined. The energy transfer mechanism and oxygen vacancies that arise due to the introduction of Mn²⁺ ions in the NYPO:Dy phosphors, are responsible for the tuning of cool white light to pure day white light. The introduction of Mn in the Dy doped NYPO phosphor enhances the emission intensity in the phosphor.     

Eu2+ activated novel eulytite Na3Bi5(PO4)6: Eu3+ phosphors: Enhanced luminescence and thermal stability for photonics application

For the first time, novel eulytite-like Eu²⁺/Eu³⁺: Na₃Bi₅(PO₄)₆ phosphor was synthesized via high temperature solid-state reaction method in reduction environment, and the structure, luminescence performances and thermal stability were investigated and discussed using various techniques. X-ray refinement diffraction and Raman spectra revealed the around 200 nm well-crystallized eulytite-type (I43d space group) phosphors were synthesized, and a diagram of crystal structure of Na₃Bi₅(PO₄)₆ was proposed. X-ray photoelectron spectroscopy analysis confirmed the co-existence of Eu²⁺ and Eu³⁺ ions which exhibited characteristic 4f⁶5d→⁸S_7/2 transition of Eu²⁺ and ⁷F₀→⁵D_0,1,2,3,4 transitions of Eu³⁺ ions. On the other hand, due to the activation of Eu²⁺, samples displayed good tunability on excited and emission behaviors under different excited laser. The JO parameters, emission cross-section, branching ratio and asymmetric ratio indicated that the Eu doping increased the covalency and asymmetry of host. Thermal quenching was studied and the reasons were discussed. Through the comparison of phosphors prepared in different conditions, the thermal stability& repeatability, radiative lifetime, color purity and activation energy were remarkably superior due to the Eu doping and in particularly Eu²⁺ activation. Finally, the energy level and CIE chromaticity diagrams were plotted to explain the mechanism of Eu²⁺ activation and energy transfer between Eu²⁺ and Eu³⁺ ions. The 0.5%Eu doped Na₃Bi₅(PO₄)₆ exhibited promising tunable red-emission performance with quantum efficiency of 92%, activation energy of 0.24 eV, red color purity of 93.74% and very low non-radiative transfer ratio 44.20 s^?1 with smaller CCT (<2200 K).