Phase separation in melts of the ZrO<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The morphology of the quenched and slowly crystallized samples in the ZrO₂-Al₂O₃ system is investigated in the composition range 25–70 wt % ZrO₂. It is revealed that, irrespective of the cooling rate, the samples contain large baddeleyite (or corundum) crystals, eutectic mixtures, and characteristic regions of intergrown elongated baddeleyite and corundum grains with micron sizes. These regions have the same phase composition at any initial ratio between zirconium and aluminum oxides and at any cooling rates of the melt. A hypothesis is put forward that these regions are products of the decomposition of ZrO₂ · 2Al₂O₃ associates.     

The system SiC–W<Subscript>2</Subscript>B<Subscript>5</Subscript>–LaB<Subscript>6</Subscript>

Experiments and calculations have been applied to the structure of the triple eutectic system SiC–W₂B₅–LaB₆(T _eu = 1900 ± 40°C), composition in mol.%: 10 LaB₆, 44 SiC, 46 W₂B₅, error ±2–3%, which opens up prospects for making ceramic materials for various purposes.     

Crystal structure and thermal expansion of ammonium pentaborate NH<Subscript>4</Subscript>B<Subscript>5</Subscript>O<Subscript>8</Subscript>

Anhydrous ammonium pentaborate NH₄B₅O₈ has been synthesized by thermal dehydration of larderellite NH₄[B₅O₇(OH)₂] · H₂O at a temperature of 290°C for 7 h. The crystal structure has been determined from the X-ray powder diffraction data: a = 7.58667(5) Å, b = 12.00354(8) Å, c = 14.71199(8) Å, R _p = 6.23, R _wp = 7.98, R _B = 12.7, R _F = 8.95, and β-KB₅O₈ structure type. The double interpenetrating framework is formed by pentaborate groups, each consisting of a boron-oxygen tetrahedron and four triangles, in which all oxygen atoms are bridging. The thermal behavior of the NH₄B₅O₈ compound has been investigated using thermal X-ray diffraction. As for other pentaborates of this type, the thermal expansion of the NH₄B₅O₈ compound is anisotropic and reaches a maximum along the a axis. The thermal expansion coefficients are as follows: α _a = 39 × 10^?6, α _b = 6 × 10^?6, α _c = 20 × 10^?6, and α _V = 65 × 10^?6 °C^?1.     

Crystallization of glasses in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The crystallization of strontium borate glasses containing 16.7–43.0 mol % SrO is investigated. New crystalline compounds of the hypothetical compositions 2SrO · 3B₂O₃ (metastable) and SrO · 5B₂O₃ (stable below 750°C), as well as the metastable diborate modification β-SrO · 2B₂O₃, are revealed, and their X-ray powder diffraction data are obtained. It is demonstrated that, with a deficit of strontium oxide, the 4SrO · 7B₂O₃ compound forms solid solutions. Strontium triborate SrO · 3B₂O₃, which was previously prepared only through the dehydration of crystal hydrates, is produced using crystallization of glasses. The thermal stability of this compound is studied. The influence of the dispersity on the stability of different crystalline phases is discussed. Variants of the phase diagram for the SrO · B₂O₃-B₂O₃ system in the case of monolithic and dispersed samples are proposed from analyzing the experimental results and the data available in the literature.     

Glass formation region and order of formation of crystalline phases in the SrO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The glass formation region in the SrO-B₂O₃-SiO₂ system has been refined. The order of formation of crystalline phases in the system has been investigated at SrO contents of 50–75 mol %. It has been demonstrated that, at low temperatures, the 2SrO · SiO₂ and 3SrO · B₂O₃ phases crystallize first irrespective of the composition. The congruent melting temperature of the 3SrO · B₂O₃ · SiO₂ compound is determined to be 1180 ± 10°C. The triangulation previously performed for the SrO-B₂O₃-SiO₂ system in the concentration range 50–75 mol % SrO has been confirmed.     

Refractive index and compressibility of the KAlSi<Subscript>3</Subscript>O<Subscript>8</Subscript> glass at pressures up to 6.0 GPa

The refractive index of potassium aluminosilicate glass of the KAlSi₃O₈ composition in the pressure range up to 6.0 GPa has been measured using a polarizing interference microscope and an apparatus with diamond anvils. The changes in the relative density, which characterize the compressibility of the K₂O · Al₂O₃ · 6SiO₂ glass, have been estimated in the pressure range under investigation from the measured refractive indices within the framework of the theory of photoelasticity. The results have been compared with the data previously obtained for the Na₂O · Al₂O₃ · 6SiO₂ glass. Although the molar contents of Al₂O₃ and M ₂O (where M = K or Na) are identical in these glasses, the KAlSi₃O₈ glass exhibits a higher compressibility, which agrees with the lower degree of depolymerization of this glass as compared to that observed in the NaAlSi₃O₈ glass. The pressure derivative of the bulk modulus K′ _t , which is calculated from the Birch-Murnaghan equation for the KAlSi₃O₈ glass (K′ _t = 7–9), is higher than that for the NaAlSi₃O₈ glass (K′ _t = 5.5–6.0). An increase in the pressure derivative of the bulk modulus K′ _t upon replacement of the Na⁺ cations by the K⁺ cations is explained by the inhibition of compression of the large K⁺ cations, which are located in cavities and have a considerably larger orbital radius than the Na+ cations. This manifests itself in the fact that the curves describing the dependences of the change in the relative density (d − d0)/d (compressibility) on the pressure P for the KAlSi₃O₈ and NaAlSi₃O₈ glasses converge at pressures above 4.0 GPa.     

Synthesis and properties of flux-cast refractories in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Details are given of the synthesis and testing of flux-cast refractory materials in the alumina-rich region of the Al₂O₃-MgO-B₂O₃ system; XRD and petrography indicate that the main structure-forming phases are corundum and magnesian spinel. In subordinate amounts there are the boroaluminate 9Al₂O₃·2B₂O₃ and the previously unknown compound 4Al₂O₃·MgO·2B₂O₃, whose composition has been established by microprobe analysis. Corrosion tests showed that three-component systems containing magnesium and boron oxides at levels of 5–10% do not increase the corrosion resistance of refractories in molten sodium-calcium-silicate glass and electrovacuum borosilicate glass. __________ Translated from Novye Ogneupory, No. 3, pp. 161–163, March, 2008.     

Highly efficient photocatalytic degradation of methylene blue using carbonaceous WO<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> composites

Recent improvements in the performance of photocatalysts made it possible to tackle pollution through environment friendly methods. This study investigates the modification of the photocatalytic activity of TiO₂ by employing WO₃ and conductive polymers, namely, polyaniline (Pani) and polypyrrole (Ppy). Basing on our previous improvement of TiO₂ using a conductive polymer and activated carbon (AC), this study determines the activated carbon forms of TiO₂. The prepared composites are characterized using X-ray powder diffraction, transmission electron microscopy, Fourier transform infrared, thermogravimetric analysis, Brunauer–Emmet–Teller, and UV–Vis spectroscopy. The specific surface area of the mesoporous composites is as follows: WO₃/TiO₂·AC (Pani) > WO₃/TiO₂·AC (Ppy) > WO₃/TiO₂·Pani > WO₃/TiO₂·Ppy (127 > 98 > 68 > 44 m² g^?1), which exhibited a similar trend to the photocatalytic performances (100 > 95 > 91 > 72 % conversion rate). This result could be attributed to higher porosity, surge of charge separation, and photo-responding range extension induced by the synergistic effect of WO₃, conducting polymers, and TiO₂ in the samples.     

Zr K-edge XAS study on ZrO<Subscript>2</Subscript>-pillared aluminosilicate

The ZrO₂-pillared clay with high acidic property has been prepared by reacting 1 wt% colloidal suspension of Na⁺-montmorillonite with 1 N aqueous solution of ZrOCl₂·8H₂O and by subsequent heating. The evolution of local structure around zirconium of the intercalant stabilized in-between aluminosilicate layers upon intercalating, drying, and pillaring condition has been systematically studied by X-ray absorption spectroscopy, and compared to those of reference compounds such as ZrO₂, and ZrOCl₂ · 8H₂O and its 1 N aqueous solution. The intercalated zirconium species was identified as the Zr-tetramer, [Zr₄(OH)₁₄(H₂O)₁₀]²⁺, with an average molecular volume of 10 × 10 Å² and a thickness of 4.5 Å. Also it becomes more condensed upon drying and eventually transforms to a zirconium oxide pillar upon calcination.     

Influence of pressure on the refractive index and relative density of glasses in the CaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

The pressure dependences of the refractive index for aluminosilicate glasses of the compositions 0.167CaO · 0.167Al₂O₃ · 0.666SiO₂ and 0.157CaO · 0.177Al₂O₃ · 0.666SiO₂ at pressures up to 6.0 GPa are determined using a polarizing interference microscope and an apparatus with diamond anvils. The compressibilities of the glasses are calculated from the measured refractive indices within the framework of the theory of photoelasticity. The structural-chemical parameters NBO/T (where NBO is the number of gram-ions of nonbridging oxygen atoms and T is the total number of gram-ions of network formers) are calculated for the glasses under investigation with allowance made for the formation of triclusters and highly coordinated aluminum.     

Structural investigation of glasses in the <Emphasis Type="Italic">x</Emphasis>(0.16GaCh<Subscript>2</Subscript> · 0.84GeCh<Subscript>2</Subscript>) · (1 − <Emphasis Type="Italic">x</Emphasis>)(SbCh<Subscript>1.5</Subscript>) (Ch = S,Se) system

The structure of glasses in the x(0.16GaCh₂ · 0.84GeCh₂) · (1 − x)(SbCh_1.5) (Ch = S, Se) system has been investigated using Raman scattering. The structure of glasses is interpreted as a superposition of the following structural units: Ge(Ga)Ch_4/2, Ch_3/2Ge(Ga)-Ge(Ga)Ch_3/2, SbCh_3/2, and -Ch-Ch-, where Ch = S and Se. The change in the fraction of the corresponding structural units with a change in the glass composition has been analyzed.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript>@TiO<Subscript>2</Subscript>-OSO<Subscript>3</Subscript>H: an efficient hierarchical nanocatalyst for the organic quinazolines syntheses

A sulfonic acid functionalized titanium dioxide quasi-superparamagnetic nanocatalyst Fe₃O₄@SiO₂@TiO₂-OSO₃H with average size of 61 nm and semispherical shape with surface area about 97 m² g^?1 with saturation magnetization 17.7 emu g^?1 and the coercivity 9.84 Oe was successfully synthesized. The structure and morphology of the nanocatalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy, X-ray diffraction pattern, transmission electron microscopy, field-emission scanning electron microscopy, vibrating sample magnetometer and Brunauer–Emmett–Teller surface area analysis. The catalytic usage of the nanocatalyst was exemplified in synthesis of 2,3-dihydroquinazolin-4(1H)-one and spiroquinazolin-4(3H)-one derivatives in deep eutectic solvents (DESs) based on choline chloride and urea. We suggest that the synergistic effects in catalytic activities of titanium dioxide, organic acid and the CO₂ capture property of DES are the main reasons for the improvement of catalytic activity. The synthesized spiroquinazolinones and dihydroquinazolinones derivatives were characterized by FT-IR, ¹H and ¹³C nuclear magnetic resonance spectroscopy. The magnetic nanocatalyst exhibit high catalytic activity and can be simply separated from reaction media by an external magnet in a few seconds and could be reused for six cycles without significant loos in activity, which indicates the good immobilization of sulfonic acid on the magnetic titanium dioxide support. Furthermore, the solvent which has been used in this work can be readily isolated and reused for several times.     

Reaction of MoSi<Subscript>2</Subscript> with niobium and tantalum diborides

Results are provided for a study of the reaction of MoSi₂ with niobium and tantalum diborides. It is established that sections of MoSi₂–Nb(Ta)B₂ within the quaternary system Mo–Si–B–Nb(Ta) are described by eutectic composition diagrams with a eutectic temperature equal to 1870 and (1890 ± 30)°C. The diboride phase content is 20 and 14 mol.% respectively in systems with NbB₂ and TaB₂.     

Glass formation and the phase diagram of crystalline components in the Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-PbI<Subscript>2</Subscript> system

Glasses in the Sb₂S₃-PbI₂ system are synthesized, and their physicochemical properties are investigated. The glasses possess high refractive indices (up to 3 or greater). The phase diagram of the Sb₂S₃-PbI₂ system is constructed from the data of differential thermal and X-ray powder diffraction analyses. The diagram exhibits an eutectic behavior. The eutectic is located at a content of 47 mol % PbI₂ and at a temperature of 370 ± 5°C.Original Russian Text Copyright © 2004 by Fizika i Khimiya Stekla, Samoilenko, Mohammad Arif, Novikov, Filatov, Blinov.     

Self-Assembly Syntheses and Crystal Structure of a New Organotin(IV) Schiff Base Complex Containing a Novel Sn<Subscript>5</Subscript>O<Subscript>5</Subscript> Hydrolysis Ladder

A new organotin(IV) Schiff base complex 4 containing a novel Sn₅O₅ hydrolysis ladder and a disulfide group has been synthesized through a self-assembly reaction. The complex 4 has been characterized by elemental analysis, IR, ¹H-, ¹³C-, and ¹¹⁹Sn-NMR spectra and X-ray crystallography diffraction analyses. The study of the supramolecular structure of complex 4 found that there exist two kinds of C–H···S and C–H···O intermolecular hydrogen bonds. The two kinds of intermolecular hydrogen bonds force the complex 4 into a 2-dimensional “wave” network. The geometry about each tin atom involved is distorted trigonal bipyramid.     

Thermal behavior of reedmergnerite NaBSi<Subscript>3</Subscript>O<Subscript>8</Subscript> and searlesite NaBSi<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>2</Subscript>

The results of studying the thermal behavior of natural boron albite–reedmergnerite NaBSi₃O₈ and aqueous boricilicate–searlesite NaBSi₂O₅(OH)₂ obtained by the method of hydrothermal synthesis are presented. In the investigated temperature range, reedmergnerite (30–780°C) does not undergo phase transformations. Thermal expansion is sharply anisotropic, which is a characteristic feature of the expansion of feldspars. Aqueous borosilicate searlesite (25–750°C) is amorphized above 400°C as a result of dehydration and cristobalite crystallizes from the amorphous phase. The expansion of searlesite is relatively isotropic.     

Synthesis and crystal structure of the low-temperature modification of Li<Subscript>12</Subscript>Zn<Subscript>4</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>5</Subscript>

The crystal structure of a low-temperature modification of the Li₁₂Zn₄(P₂O₇)₅ compound has been determined by full-profile analysis from the X-ray powder diffraction data. The compound crystallizes in the monoclinic crystal system (a = 5.130(1) Å, b = 13.454(1) Å, c = 8.205(1) Å, β = 90.36(1)°, space group P2₁/n, Z = 4) and has a framework structure in which the zinc and lithium atoms statistically occupy equivalent positions.     

Unexpected Formation of a Doubly Bridged Cyclo-1,2-dithian 1D Coordination Cu<Subscript>2</Subscript>I<Subscript>2</Subscript>-Containing Luminescent Polymer

Abstract  

CuI reacts instantaneously with butanedithiol in MeCN solution to form a sparingly soluble and thermally stable colorless polymeric material 1 of composition [(Cu₂I₂){HS(CH₂)₄SH}] _n . Raman and IR spectroscopy confirm the presence of Cu(I) bound S–H functions. Furthermore, small amounts of the yellow compound [{Cu(μ₂-I)₂Cu}(C₄H₈S₂)₂] _n 2 co-crystallize after several days. If the reaction mixture is exposed to air, polymeric 2 is isolated as the main product. An X-ray diffraction study reveals that 1D polymer 2 is assembled by rhomboid Cu(μ₂-I)₂Cu clusters (d Cu···Cu 2.6843(18) ?), which are linked through the S-atoms of six-membered 1,2-dithian heterocycles, thus generating an infinite ribbon. The low-frequency region in the Raman spectra show a striking similarity suggesting that polymers 1 and 2 bear the same cluster rhomboid Cu(μ₂-I)₂Cu clusters. The photophysics and luminescence properties of 2 have been studied experimentally and by means of DFT/TDDFT calculations.     

A study on synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by solvothermal method

Magnetic nanoparticles (Fe₃O₄) were synthesized by the solvothermal method using FeCl₃ · 6H₂O and ethylene glycol as a reactant. Powder X-ray diffraction, FT-IR, TEM, SEM, and VSM were used to characterize the magnetic particles. The reacting factors, such as reacting time, the concentration of iron source and surfactant, especially the effect of NaAc · 3H₂O, were studied. The results indicated that NaAc · 3H₂O plays the role not only as a dispersant but also a structure-directing agent. The synthesized Fe₃O₄ particles showed excellent magnetic property, which made them have potential for application in magnetic nanodevices and biomedicine.     

Infrared Signature of Novel Super-Thermite (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Mg) Fluorocarbon Nanocomposite for Effective Countermeasures of Infrared Seekers

Infrared (IR) guided missiles are real threat; they caused 90% of aircraft damage. Fluorocarbon polymer nanocomposite based on super-thermites can offer superior thermal signature to countermeasure IR guided missile seekers. This study reports on the sustainable fabrication of mono-dispersed colloidal Fe₂O₃ nanoparticles with 3 nm average particle size. Fe₂O₃ nanoparticles were dispersed in acetone for subsequent integration in fluorocarbon polymer. The impact of Fe₂O₃ content on thermal signature was evaluated using (FT-MIR 2–6 μm) spectrophotometer. Nanocomposite polymer with 8 wt% Fe₂O₃ offered an increase in the average intensity of α (2–3 μm) and β (4–5 μm) bands by 50 and 85% respectively to that of reference formulation. Quantification of stimulated emitting species in the combustion flame was conducted using ICT thermodynamic code. The developed nanothermite particles extended the primary reaction zone by 183%. Full discussions about combustion zones with associated exothermic chemical reactions have been represented.