基于控制性能的MIMO非线性系统动态面控制

针对一类不确定非线性MIMO(multiple-input multiple-output)系统,在动态面控制方法的基础上,提出了自适应跟踪控制方案.通过引入性能函数和输出误差转换,保证输出信号具有指定的跟踪速度、跟踪误差、最大超调量.为了避免控制奇异问题,采用神经网络直接逼近期望控制信号.该方案无需估计神经网络的权值,仅对1个参数进行自适应律设计.理论证明了闭环系统所有信号有界,仿真结果验证了所提方案的有效性.     

神经网络自适应滑模控制的不确定机器人轨迹跟踪控制

提出一种针对机器人跟踪控制的神经网络自适应滑模控制策略。该控制方案将神经网络的非线性映射能力与滑模变结构和自适应控制相结合。对于机器人中不确定项,通过RBF网络分别进行自适应补偿,并通过滑模变结构控制器和自适应控制器消除逼近误差。同时基于Lyapunov理论保证机器手轨迹跟踪误差渐进收敛于零。仿真结果表明了该方法的优越性和有效性。     

基于线性参数神经网络的非线性系统稳定自适应控制

提出适用于多种网络类型的神经网络稳定自适应控制设计思想,在神经网络逼近误差界未知的条件下,对该误差界进行在线自适应估计,研究基于线性参数神经网络的仿射非线性系统稳定自适应控制。采和Ｌａｐｕｎｏｖ函数方法证明系统状态变量、网络权值矢量、网络逼近误差界的在线估计及输出跟踪误差的收敛性。仿真结果表明,该方案跟踪性能良好,稳态误差较小,系统输出能快速跟踪目标信号。     

非线性时滞系统的稳定自适应控制

针对模型不确定性的连续时间时滞系统，提出了一种新的神经网络自适应控制。系统的辨识模型是由神经网络和系统的已知信息组合构成，在此基础上，建立时滞系统的预测模型。基于神经网络预测模型的自适应控制器能够实现期望轨线的跟踪，理论上证明了闭环系统的稳定性。连续搅拌釜式反应器仿真结果表明了该控制方案的有效性。     

机械臂轨迹跟踪控制--基于EC-RBF神经网络的机械臂模型参考自适应控制

针对机械臂运动轨迹控制中存在的跟踪精度不高的问题,采用了一种基于EC-RBF神经网络的模型参考自适应控制方案对机械臂进行模型辨识与轨迹跟踪控制。该方案采用了两个RBF神经网络,运用EC-RBF学习算法,采用离线与在线相结合的方法来训练神经网络,一个用来实现对机械臂进行模型辨识,一个用来实现对机械臂轨迹跟踪控制。对二自由度机械臂进行仿真,结果表明,使用该控制方案对机械臂进行轨迹跟踪控制具有较高的控制精度,且因采用EC-RBF学习算法使网络具有更快的训练速度,从而使得控制过程较迅速。     

一类非线性系统的稳定神经网络自适应控制

利用神经网络作为非线性系统的模型，研究了一类非线性系统的神经网络自适应控制问题，设计出的自适应控制器具有如下的特点：（１）网络仅值是基于参考误差信号学习的投影算法来调节，这样可保证权值的有界性；（２）为了减小神经网络参数估计误差对跟踪误差的影响，提出了根据参考误差信号实时修正神经网络输入的方法。仿真结果对该控制方案进行了验证。     

机器人轨迹跟踪的一种自适应神经鲁棒控制

针对不稳定机器人轨迹跟踪问题,提出了一种基于神经网络的自适应鲁棒控制。该控制方案由一个PD反馈和一个神经动态补偿器组成,其特点是不需要系统不确定性上界的先验知识,而且避免了求解惯性矩阵逆,通过利用一个RBF神经网络自适应学习系统不稳定性的未知上界,从而可以有效克服系统不确定性的影响,保证机器人系统的输出跟踪误差渐近收敛于0。     

自适应模糊变结构控制器的一种新设计

针对一类非线性系统,基于一种修改的李亚普诺夫函数并利用Ⅰ型模糊系统的逼近能力,提出一种稳定自适应模糊控制器设计的新方案。该方案能够避免现有的一些自适应模糊／神经网络控制器设计中对控制增益一阶际数上界的要求。理论分析证明了闭环控制系统是全局稳定的,跟踪误差收敛到零。仿真结果表明了该方法的有效性。     

基于状态全反馈的动态迟滞非线性系统

该文针对不平滑、多映射动态迟滞非线性系统,提出了一种基于神经网络自适应控制方案.在该方案中,通过利用神经网络来逼近模型误差,避免了目前常用逆模型补偿方案中,需求取复杂逆模型的问题.应用Lyapnov稳定定理,证明了整个闭环系统的跟踪误差及神经网络权值将收敛到零点一个有界邻域内.仿真结果表明,所提出的控制方案能够有效补偿迟滞非线性对系统的影响.     

一类非线性切换系统的自适应神经动态面控制

针对一类严格反馈型不确定非线性切换系统,提出了一种鲁棒自适应神经动态面跟踪控制方案.该方案在基于共同Lyapunov函数的后推法设计中引入动态面控制(dynamic surface control,DSC)技术,利用径向基神经网络逼近构造的未知共同上界函数,并将滤波器输出导数取代传统中间变量作为神经网络输入,降低了网络输入维度;同时利用Young’s不等式技术有效减少了神经网络控制器的可调参数数目.此外,理论证明了该控制方案可以保证在任意切换下闭环系统所有信号半全局一致终结有界,且跟踪误差在有限时间收敛到零的小邻域内.实验结果表明了所提方法达到了很好的跟踪性能.     

一类非线性不确定系统的神经网络控制

针对一类非线性不确定系统,提出了一种自适 应神经网络控制方案．被控系统是部分已知的,其中系统已知的动态特性被用来设计保证标 称模型稳定的反馈控制器,而基于神经网络的动态补偿器则用于补偿系统的非线性不确定性 ,从而可以保证系统输出跟踪误差渐近收敛于0．     

机器人的非奇异终端神经滑模轨迹跟踪控制

针对具有不确定性的机器人系统,为提高系统的稳态跟踪精度,提出一种非奇异终端神经滑模轨迹跟踪控制方案.控制器采用改进的非奇异终端滑模面,并基于径向基函数神经网络自适应调整控制律的切换项,不但克服了在设计中需要知道系统不确定性的上界的限制,而且平滑了控制信号.可应用Lyapunov稳定性理论证明了系统的渐近稳定性和跟踪误差的渐近收敛性.仿真结果验证了控制方法不仅能够保证机器人系统轨迹跟踪控制的快速性和鲁棒性,而且有效地削弱了抖振,可见方案是可行且有效的.     

电液位置伺服系统的多滑模神经网络控制

针对电液位置伺服系统存在的强非线性、控制增益未知和非匹配不确定性.通过引入神经网络和带饱和层的多滑模面,提出了一种多滑模神经网络控制方法.该方法运用神经网络的万能逼近特性和滑模控制优良的抗干扰特点,采用构造性方法设计控制器.运用光滑投影算法和积分李雅普诺夫技术,避免了参数漂移和控制器奇异问题.理论证明了系统跟踪误差收敛于任意设定的滑模面饱和层内.仿真实验表明了理论结果的有效性.     

Direct adaptive neural control of nonlinear systems with extreme learning machine

A direct adaptive neural control scheme for a class of nonlinear systems is presented in the paper. The proposed control scheme incorporates a neural controller and a sliding mode controller. The neural controller is constructed based on the approximation capability of the single-hidden layer feedforward network (SLFN). The sliding mode controller is built to compensate for the modeling error of SLFN and system uncertainties. In the designed neural controller, its hidden node parameters are modified using the recently proposed neural algorithm named extreme learning machine (ELM), where they are assigned random values. However, different from the original ELM algorithm, the output weight is updated based on the Lyapunov synthesis approach to guarantee the stability of the overall control system. The proposed adaptive neural controller is finally applied to control the inverted pendulum system with two different reference trajectories. The simulation results demonstrate good tracking performance of the proposed control scheme.     

Robust adaptive neural sliding mode control of MEMS triaxial gyroscope with angular velocity estimation

In this paper, a robust adaptive sliding mode control strategy of micro electro-mechanical system (MEMS) triaxial gyroscope using radial basis function (RBF) neural network is presented for the system identification of MEMS gyroscope. A key property of this scheme is that the prior knowledge of the upper bound of the system uncertainties is not required. An adaptive RBF neural network controller is used to learn the unknown upper bound of model uncertainties and external disturbances. The adaptive RBF neural network is incorporated into the adaptive sliding mode control in the Lyapunov sense, and the stability of the proposed adaptive neural sliding mode control can be established. The dynamics and angular velocities of gyroscope can be identified in real time. Numerical simulations are investigated to verify the effectiveness of the proposed adaptive neural sliding mode control scheme, showing that the designed control system has better robust performance in its insensitivity to system nonlinearities; moreover, system parameters including angular velocity can be consistently estimated and tracking errors converge to zero asymptotically.     

Direct adaptive neural flight control system for an unstable unmanned aircraft

A direct adaptive controller design using neural network is proposed for an unstable unmanned research aircraft similar in configuration to combat aircraft. The control law to track the pitch rate command is developed based on system theory. Neural network with linear filters and back propagation through time learning algorithm is used to approximate the control law. The bounded signal requirement to develop the neural controller is circumvented using an off-line finite time training scheme, which provides the necessary stability and tracking performances. On-line learning scheme is implemented to compensate for uncertainties due to variation in aerodynamic coefficients, control surface failures and also variations in center of gravity position. The performance of the proposed control scheme is validated at different flight conditions. The disturbance rejection capability of the neural controller is analyzed in the presence of the realistic gust and sensor noises. Hardware-in-loop simulation is also carried out to study the behavior of control surface deflections in real-time.     

Adaptive manipulator trajectory control using neural networks

A unified study of adaptive control and neural network based control schemes for the trajectory tracking problem of robot manipulators is presented. Efficacy of parametrized adaptive algorithms in compensating the structured uncertainties in robot dynamics is verified through extensive simulation. The ability of neural networks to provide a robust adaptive framework in the presence of both structured and unstructured uncertainties is investigated. A case study is carried out in support of a parametrized adaptive scheme using neural networks. Simulation results clearly indicate that the neural network based adaptive controller achieves better tracking in the presence of parametric uncertainties as well as unmodelled effects compared to the simple direct adaptive scheme.     

Design of Adaptive Robot Control System Using Recurrent Neural Network

The use of a new Recurrent Neural Network (RNN) for controlling a robot manipulator is presented in this paper. The RNN is a modification of Elman network. In order to solve load uncertainties, a fast-load adaptive identification is also employed in a control system. The weight parameters of the network are updated using the standard Back-Propagation (BP) learning algorithm. The proposed control system is consisted of a NN controller, fast-load adaptation and PID-Robust controller. A general feedforward neural network (FNN) and a Diagonal Recurrent Network (DRN) are utilised for comparison with the proposed RNN. A two-link planar robot manipulator is used to evaluate and compare performance of the proposed NN and the control scheme. The convergence and accuracy of the proposed control scheme is proved.     

基于神经网络的无人机姿态自适应控制仿真

针对四旋翼无人机姿态控制中模型不完整、部分参数和扰动不确定的问题,提出了一种基于神经网络的自适应控制方法,采用RBF神经网络对无人机姿态动力学模型中不确定和扰动部分进行学习,设计了以类反步法为基础,包含反馈控制和神经网络控制的自适应控制器,实现了对未知动态的准确逼近,解决了传统控制方法中过于依赖精确模型的问题。同时设计了神经网络的权值自适应律,实现了控制过程中的在线学习和调整,并且通过李雅普诺夫方法证明了闭环系统的稳定性。仿真结果表明,在存在较大扰动的情况下,上述控制器可得到很好的控制效果,可以实现误差的快速收敛,具有较好的鲁棒性和自适应性。     

Robust neural network–based tracking control and stabilization of a wheeled mobile robot with input saturation

This paper presents a robust neural network–based control scheme to deal with the problem of tracking and stabilization simultaneously for a wheeled mobile robot subject to parametric uncertainties, external disturbances, and input saturation. At first, a new error‐state transformation scheme is designed by introducing some auxiliary variables as an additional virtual control signals to reduce the adverse effect caused by the underactuation. These variables can change their structures for different desired trajectories to be tracked. Then, a robust control law is proposed combining with a kinematic controller and a dynamic controller, while a three‐layer neural network system is applied to approximate model uncertainties. Stability analysis via the Lyapunov theory shows that the proposed controller can make tracking errors converge to bounded neighborhoods of the origin. Finally, some simulation results are illustrated to verify the effectiveness of the proposed control strategy.